android_kernel_xiaomi_sm8350/arch/m68knommu/platform/5307/head.S
Greg Ungerer 5b3d98bb7f [PATCH] m68knommu: handle non base address 0 memory of M5208EVB board
The Freescale M5208EVB ColdFire eval board is one of the few that
doesn't have its DRAM based at address 0. Handle this special case
in the common ColdFire startup code.

Patch originally from Matt Waddel.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 08:00:46 -08:00

266 lines
6.8 KiB
ArmAsm

/*****************************************************************************/
/*
* head.S -- common startup code for ColdFire CPUs.
*
* (C) Copyright 1999-2004, Greg Ungerer (gerg@snapgear.com).
*/
/*****************************************************************************/
#include <linux/config.h>
#include <linux/sys.h>
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/coldfire.h>
#include <asm/mcfcache.h>
#include <asm/mcfsim.h>
/*****************************************************************************/
/*
* Define fixed memory sizes. Configuration of a fixed memory size
* overrides everything else. If the user defined a size we just
* blindly use it (they know what they are doing right :-)
*/
#if defined(CONFIG_RAM32MB)
#define MEM_SIZE 0x02000000 /* memory size 32Mb */
#elif defined(CONFIG_RAM16MB)
#define MEM_SIZE 0x01000000 /* memory size 16Mb */
#elif defined(CONFIG_RAM8MB)
#define MEM_SIZE 0x00800000 /* memory size 8Mb */
#elif defined(CONFIG_RAM4MB)
#define MEM_SIZE 0x00400000 /* memory size 4Mb */
#elif defined(CONFIG_RAM1MB)
#define MEM_SIZE 0x00100000 /* memory size 1Mb */
#endif
/*
* Memory size exceptions for special cases. Some boards may be set
* for auto memory sizing, but we can't do it that way for some reason.
* For example the 5206eLITE board has static RAM, and auto-detecting
* the SDRAM will do you no good at all. Same goes for the MOD5272.
*/
#ifdef CONFIG_RAMAUTO
#if defined(CONFIG_M5206eLITE)
#define MEM_SIZE 0x00100000 /* 1MiB default memory */
#endif
#if defined(CONFIG_MOD5272)
#define MEM_SIZE 0x00800000 /* 8MiB default memory */
#endif
#endif /* CONFIG_RAMAUTO */
/*
* If we don't have a fixed memory size now, then lets build in code
* to auto detect the DRAM size. Obviously this is the prefered
* method, and should work for most boards (it won't work for those
* that do not have their RAM starting at address 0).
*/
#if defined(MEM_SIZE)
.macro GET_MEM_SIZE
movel #MEM_SIZE,%d0 /* hard coded memory size */
.endm
#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
defined(CONFIG_M5249) || defined(CONFIG_M527x) || \
defined(CONFIG_M528x) || defined(CONFIG_M5307) || \
defined(CONFIG_M5407)
/*
* Not all these devices have exactly the same DRAM controller,
* but the DCMR register is virtually identical - give or take
* a couple of bits. The only exception is the 5272 devices, their
* DRAM controller is quite different.
*/
.macro GET_MEM_SIZE
movel MCF_MBAR+MCFSIM_DMR0,%d0 /* get mask for 1st bank */
btst #0,%d0 /* check if region enabled */
beq 1f
andl #0xfffc0000,%d0
beq 1f
addl #0x00040000,%d0 /* convert mask to size */
1:
movel MCF_MBAR+MCFSIM_DMR1,%d1 /* get mask for 2nd bank */
btst #0,%d1 /* check if region enabled */
beq 2f
andl #0xfffc0000, %d1
beq 2f
addl #0x00040000,%d1
addl %d1,%d0 /* total mem size in d0 */
2:
.endm
#elif defined(CONFIG_M5272)
.macro GET_MEM_SIZE
movel MCF_MBAR+MCFSIM_CSOR7,%d0 /* get SDRAM address mask */
andil #0xfffff000,%d0 /* mask out chip select options */
negl %d0 /* negate bits */
.endm
#else
#error "ERROR: I don't know how to determine your boards memory size?"
#endif
/*
* Most ColdFire boards have their DRAM starting at address 0.
* Notable exception is the 5206eLITE board, another is the MOD5272.
*/
#if defined(CONFIG_M5206eLITE)
#define MEM_BASE 0x30000000
#endif
#if defined(CONFIG_MOD5272)
#define MEM_BASE 0x02000000
#define VBR_BASE 0x20000000 /* vectors in SRAM */
#endif
#if defined(CONFIG_M5208EVB)
#define MEM_BASE 0x40000000
#endif
#ifndef MEM_BASE
#define MEM_BASE 0x00000000 /* memory base at address 0 */
#endif
/*
* The default location for the vectors is at the base of RAM.
* Some boards might like to use internal SRAM or something like
* that. If no board specific header defines an alternative then
* use the base of RAM.
*/
#ifndef VBR_BASE
#define VBR_BASE MEM_BASE /* vector address */
#endif
/*****************************************************************************/
/*
* Boards and platforms can do specific early hardware setup if
* they need to. Most don't need this, define away if not required.
*/
#ifndef PLATFORM_SETUP
#define PLATFORM_SETUP
#endif
/*****************************************************************************/
.global _start
.global _rambase
.global _ramvec
.global _ramstart
.global _ramend
/*****************************************************************************/
.data
/*
* During startup we store away the RAM setup. These are not in the
* bss, since their values are determined and written before the bss
* has been cleared.
*/
_rambase:
.long 0
_ramvec:
.long 0
_ramstart:
.long 0
_ramend:
.long 0
/*****************************************************************************/
.text
/*
* This is the codes first entry point. This is where it all
* begins...
*/
_start:
nop /* filler */
movew #0x2700, %sr /* no interrupts */
/*
* Do any platform or board specific setup now. Most boards
* don't need anything. Those exceptions are define this in
* their board specific includes.
*/
PLATFORM_SETUP
/*
* Create basic memory configuration. Set VBR accordingly,
* and size memory.
*/
movel #VBR_BASE,%a7
movec %a7,%VBR /* set vectors addr */
movel %a7,_ramvec
movel #MEM_BASE,%a7 /* mark the base of RAM */
movel %a7,_rambase
GET_MEM_SIZE /* macro code determines size */
addl %a7,%d0
movel %d0,_ramend /* set end ram addr */
/*
* Now that we know what the memory is, lets enable cache
* and get things moving. This is Coldfire CPU specific.
*/
CACHE_ENABLE /* enable CPU cache */
#ifdef CONFIG_ROMFS_FS
/*
* Move ROM filesystem above bss :-)
*/
lea _sbss,%a0 /* get start of bss */
lea _ebss,%a1 /* set up destination */
movel %a0,%a2 /* copy of bss start */
movel 8(%a0),%d0 /* get size of ROMFS */
addql #8,%d0 /* allow for rounding */
andl #0xfffffffc, %d0 /* whole words */
addl %d0,%a0 /* copy from end */
addl %d0,%a1 /* copy from end */
movel %a1,_ramstart /* set start of ram */
_copy_romfs:
movel -(%a0),%d0 /* copy dword */
movel %d0,-(%a1)
cmpl %a0,%a2 /* check if at end */
bne _copy_romfs
#else /* CONFIG_ROMFS_FS */
lea _ebss,%a1
movel %a1,_ramstart
#endif /* CONFIG_ROMFS_FS */
/*
* Zero out the bss region.
*/
lea _sbss,%a0 /* get start of bss */
lea _ebss,%a1 /* get end of bss */
clrl %d0 /* set value */
_clear_bss:
movel %d0,(%a0)+ /* clear each word */
cmpl %a0,%a1 /* check if at end */
bne _clear_bss
/*
* Load the current task pointer and stack.
*/
lea init_thread_union,%a0
lea THREAD_SIZE(%a0),%sp
/*
* Assember start up done, start code proper.
*/
jsr start_kernel /* start Linux kernel */
_exit:
jmp _exit /* should never get here */
/*****************************************************************************/