Steve Chen 13e1f0440e davinci: Add LCD Graphics support for DA830/OMAP-L137 EVM ... Add graphics support for the Sharp LCD035Q3DG01 graphical LCD that's on the User Interface (UI) daughter card of the DA830/OMAP-L137 EVM. The LCD shares EMIFA lines with the NAND and NOR devices that are also on the UI card so those lines are shared via a couple of muxes. The muxes are controlled by the 'MUX_MODE' line on the UI card. The 'MUX_MODE' line is controlled by pin P6 of a pcf8574 i2c expander that's at i2c address 0x3f on UI card. The i2c expander is controlled using the gpio infrastructure from the board code using the 'setup()' and 'teardown()' routines. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>		2009-11-25 10:21:23 -08:00
..
include/mach	davinci: Add support for Sharp LCD035Q3DG01 graphical LCD	2009-11-25 10:21:22 -08:00
board-da830-evm.c	davinci: Add LCD Graphics support for DA830/OMAP-L137 EVM	2009-11-25 10:21:23 -08:00
board-da850-evm.c	davinci: Add support for Sharp LCD035Q3DG01 graphical LCD	2009-11-25 10:21:22 -08:00
board-dm355-evm.c	davinci: DM355 - platform changes for vpfe capture	2009-09-16 10:25:45 -07:00
board-dm355-leopard.c	ARM: includecheck fix: board-dm355-leopard.c	2009-07-25 17:07:01 +01:00
board-dm365-evm.c	Davinci: DM365: Add platform device for McBSP	2009-11-25 10:21:17 -08:00
board-dm644x-evm.c	davinci: DM644x platform changes for vpfe capture	2009-09-16 10:25:26 -07:00
board-dm646x-evm.c	DaVinci: DM646x - platform changes for vpif capture and display drivers	2009-09-16 10:28:46 -07:00
board-sffsdr.c	ARM: includecheck fix: board-sffsdr.c	2009-07-25 17:07:02 +01:00
clock.c	davinci: support re-parenting a clock in the clock framework	2009-11-25 10:21:21 -08:00
clock.h	davinci: DA850/OMAP-L138: allow async3 source to be changed	2009-11-25 10:21:21 -08:00
common.c	davinci: Integrate cp_intc support into low-level irq code	2009-05-28 15:17:47 -07:00
cp_intc.c	davinci: INTC: add support for TI cp_intc	2009-05-26 07:18:14 -07:00
da830.c	davinci: Add LCD Graphics support for DA830/OMAP-L137 EVM	2009-11-25 10:21:23 -08:00
da850.c	davinci: DA850/OMAP-L138: allow async3 source to be changed	2009-11-25 10:21:21 -08:00
devices-da8xx.c	davinci: Add support for Sharp LCD035Q3DG01 graphical LCD	2009-11-25 10:21:22 -08:00
devices.c	DaVinci: DM365: SDIO interrupt resource correction	2009-11-25 10:21:16 -08:00
dm355.c	davinci: DM355 - platform changes for vpfe capture	2009-09-16 10:25:45 -07:00
dm365.c	Davinci: DM365: Add platform device for McBSP	2009-11-25 10:21:17 -08:00
dm644x.c	davinci: DM644x platform changes for vpfe capture	2009-09-16 10:25:26 -07:00
dm646x.c	davinci: dm646x: Add support for 3.x silicon revision	2009-11-25 10:21:22 -08:00
dma.c	DaVinci: EDMA: Adding 2 new APIs for allocating/freeing PARAMs	2009-08-26 11:55:59 +03:00
gpio.c	davinci: dm365 gpio irq support	2009-08-26 10:57:00 +03:00
io.c	davinci: Encapsulate SoC-specific data in a structure	2009-05-26 08:14:04 -07:00
irq.c	davinci: Move interrupt ctlr info to SoC infrastructure	2009-05-26 08:18:09 -07:00
Kconfig	davinci: Add LCD Graphics support for DA830/OMAP-L137 EVM	2009-11-25 10:21:23 -08:00
Makefile	davinci: Add support for DA850/OMAP-L138 EVM board	2009-08-26 11:55:45 +03:00
Makefile.boot	davinci: da8xx: Add base DA830/OMAP-L137 SoC support	2009-08-26 10:56:59 +03:00
mux.c	davinci: Rearrange the da830/omap-l137 macros and functions	2009-08-26 10:57:02 +03:00
mux.h	davinci: update pin-multiplexing support	2009-04-27 09:49:46 -07:00
psc.c	davinci: Add support for multiple PSCs	2009-05-26 08:16:46 -07:00
serial.c	davinci: Move serial platform_device into SoC-specific files	2009-05-28 15:17:41 -07:00
sram.c	davinci: sram warning fix	2009-08-26 10:56:57 +03:00
time.c	davinci: remove watchdog from soc_info	2009-08-26 10:56:57 +03:00
usb.c	davinci: DM646x: pass correct MUSB IRQs	2009-08-26 11:55:38 +03:00