0d87c7228a
The kpad structure is assigned to i2c client via i2s_set_clientdata() at the end of adp5588_probe(), but in adp5588_gpio_add() we tried to access it (via dev_get_drvdata! which is not nice at all) causing an oops. Let's pass pointer to kpad directly into adp5588_gpio_add() and adp5588_gpio_remove() to avoid accessing driver data before it is set up. Also split out building of gpiomap into a separate function to clear the logic. Reported-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
697 lines
17 KiB
C
697 lines
17 KiB
C
/*
|
|
* File: drivers/input/keyboard/adp5588_keys.c
|
|
* Description: keypad driver for ADP5588 and ADP5587
|
|
* I2C QWERTY Keypad and IO Expander
|
|
* Bugs: Enter bugs at http://blackfin.uclinux.org/
|
|
*
|
|
* Copyright (C) 2008-2009 Analog Devices Inc.
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/version.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/input.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/i2c/adp5588.h>
|
|
|
|
/* Configuration Register1 */
|
|
#define AUTO_INC (1 << 7)
|
|
#define GPIEM_CFG (1 << 6)
|
|
#define OVR_FLOW_M (1 << 5)
|
|
#define INT_CFG (1 << 4)
|
|
#define OVR_FLOW_IEN (1 << 3)
|
|
#define K_LCK_IM (1 << 2)
|
|
#define GPI_IEN (1 << 1)
|
|
#define KE_IEN (1 << 0)
|
|
|
|
/* Interrupt Status Register */
|
|
#define CMP2_INT (1 << 5)
|
|
#define CMP1_INT (1 << 4)
|
|
#define OVR_FLOW_INT (1 << 3)
|
|
#define K_LCK_INT (1 << 2)
|
|
#define GPI_INT (1 << 1)
|
|
#define KE_INT (1 << 0)
|
|
|
|
/* Key Lock and Event Counter Register */
|
|
#define K_LCK_EN (1 << 6)
|
|
#define LCK21 0x30
|
|
#define KEC 0xF
|
|
|
|
/* Key Event Register xy */
|
|
#define KEY_EV_PRESSED (1 << 7)
|
|
#define KEY_EV_MASK (0x7F)
|
|
|
|
#define KP_SEL(x) (0xFFFF >> (16 - x)) /* 2^x-1 */
|
|
|
|
#define KEYP_MAX_EVENT 10
|
|
|
|
#define MAXGPIO 18
|
|
#define ADP_BANK(offs) ((offs) >> 3)
|
|
#define ADP_BIT(offs) (1u << ((offs) & 0x7))
|
|
|
|
/*
|
|
* Early pre 4.0 Silicon required to delay readout by at least 25ms,
|
|
* since the Event Counter Register updated 25ms after the interrupt
|
|
* asserted.
|
|
*/
|
|
#define WA_DELAYED_READOUT_REVID(rev) ((rev) < 4)
|
|
|
|
struct adp5588_kpad {
|
|
struct i2c_client *client;
|
|
struct input_dev *input;
|
|
struct delayed_work work;
|
|
unsigned long delay;
|
|
unsigned short keycode[ADP5588_KEYMAPSIZE];
|
|
const struct adp5588_gpi_map *gpimap;
|
|
unsigned short gpimapsize;
|
|
#ifdef CONFIG_GPIOLIB
|
|
unsigned char gpiomap[MAXGPIO];
|
|
bool export_gpio;
|
|
struct gpio_chip gc;
|
|
struct mutex gpio_lock; /* Protect cached dir, dat_out */
|
|
u8 dat_out[3];
|
|
u8 dir[3];
|
|
#endif
|
|
};
|
|
|
|
static int adp5588_read(struct i2c_client *client, u8 reg)
|
|
{
|
|
int ret = i2c_smbus_read_byte_data(client, reg);
|
|
|
|
if (ret < 0)
|
|
dev_err(&client->dev, "Read Error\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int adp5588_write(struct i2c_client *client, u8 reg, u8 val)
|
|
{
|
|
return i2c_smbus_write_byte_data(client, reg, val);
|
|
}
|
|
|
|
#ifdef CONFIG_GPIOLIB
|
|
static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off)
|
|
{
|
|
struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
|
|
unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
|
|
unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
|
|
|
|
return !!(adp5588_read(kpad->client, GPIO_DAT_STAT1 + bank) & bit);
|
|
}
|
|
|
|
static void adp5588_gpio_set_value(struct gpio_chip *chip,
|
|
unsigned off, int val)
|
|
{
|
|
struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
|
|
unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
|
|
unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
|
|
|
|
mutex_lock(&kpad->gpio_lock);
|
|
|
|
if (val)
|
|
kpad->dat_out[bank] |= bit;
|
|
else
|
|
kpad->dat_out[bank] &= ~bit;
|
|
|
|
adp5588_write(kpad->client, GPIO_DAT_OUT1 + bank,
|
|
kpad->dat_out[bank]);
|
|
|
|
mutex_unlock(&kpad->gpio_lock);
|
|
}
|
|
|
|
static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off)
|
|
{
|
|
struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
|
|
unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
|
|
unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
|
|
int ret;
|
|
|
|
mutex_lock(&kpad->gpio_lock);
|
|
|
|
kpad->dir[bank] &= ~bit;
|
|
ret = adp5588_write(kpad->client, GPIO_DIR1 + bank, kpad->dir[bank]);
|
|
|
|
mutex_unlock(&kpad->gpio_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int adp5588_gpio_direction_output(struct gpio_chip *chip,
|
|
unsigned off, int val)
|
|
{
|
|
struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
|
|
unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
|
|
unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
|
|
int ret;
|
|
|
|
mutex_lock(&kpad->gpio_lock);
|
|
|
|
kpad->dir[bank] |= bit;
|
|
|
|
if (val)
|
|
kpad->dat_out[bank] |= bit;
|
|
else
|
|
kpad->dat_out[bank] &= ~bit;
|
|
|
|
ret = adp5588_write(kpad->client, GPIO_DAT_OUT1 + bank,
|
|
kpad->dat_out[bank]);
|
|
ret |= adp5588_write(kpad->client, GPIO_DIR1 + bank,
|
|
kpad->dir[bank]);
|
|
|
|
mutex_unlock(&kpad->gpio_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __devinit adp5588_build_gpiomap(struct adp5588_kpad *kpad,
|
|
const struct adp5588_kpad_platform_data *pdata)
|
|
{
|
|
bool pin_used[MAXGPIO];
|
|
int n_unused = 0;
|
|
int i;
|
|
|
|
memset(pin_used, 0, sizeof(pin_used));
|
|
|
|
for (i = 0; i < pdata->rows; i++)
|
|
pin_used[i] = true;
|
|
|
|
for (i = 0; i < pdata->cols; i++)
|
|
pin_used[i + GPI_PIN_COL_BASE - GPI_PIN_BASE] = true;
|
|
|
|
for (i = 0; i < kpad->gpimapsize; i++)
|
|
pin_used[kpad->gpimap[i].pin - GPI_PIN_BASE] = true;
|
|
|
|
for (i = 0; i < MAXGPIO; i++)
|
|
if (!pin_used[i])
|
|
kpad->gpiomap[n_unused++] = i;
|
|
|
|
return n_unused;
|
|
}
|
|
|
|
static int __devinit adp5588_gpio_add(struct adp5588_kpad *kpad)
|
|
{
|
|
struct device *dev = &kpad->client->dev;
|
|
const struct adp5588_kpad_platform_data *pdata = dev->platform_data;
|
|
const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
|
|
int i, error;
|
|
|
|
if (!gpio_data)
|
|
return 0;
|
|
|
|
kpad->gc.ngpio = adp5588_build_gpiomap(kpad, pdata);
|
|
if (kpad->gc.ngpio == 0) {
|
|
dev_info(dev, "No unused gpios left to export\n");
|
|
return 0;
|
|
}
|
|
|
|
kpad->export_gpio = true;
|
|
|
|
kpad->gc.direction_input = adp5588_gpio_direction_input;
|
|
kpad->gc.direction_output = adp5588_gpio_direction_output;
|
|
kpad->gc.get = adp5588_gpio_get_value;
|
|
kpad->gc.set = adp5588_gpio_set_value;
|
|
kpad->gc.can_sleep = 1;
|
|
|
|
kpad->gc.base = gpio_data->gpio_start;
|
|
kpad->gc.label = kpad->client->name;
|
|
kpad->gc.owner = THIS_MODULE;
|
|
|
|
mutex_init(&kpad->gpio_lock);
|
|
|
|
error = gpiochip_add(&kpad->gc);
|
|
if (error) {
|
|
dev_err(dev, "gpiochip_add failed, err: %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
for (i = 0; i <= ADP_BANK(MAXGPIO); i++) {
|
|
kpad->dat_out[i] = adp5588_read(kpad->client,
|
|
GPIO_DAT_OUT1 + i);
|
|
kpad->dir[i] = adp5588_read(kpad->client, GPIO_DIR1 + i);
|
|
}
|
|
|
|
if (gpio_data->setup) {
|
|
error = gpio_data->setup(kpad->client,
|
|
kpad->gc.base, kpad->gc.ngpio,
|
|
gpio_data->context);
|
|
if (error)
|
|
dev_warn(dev, "setup failed, %d\n", error);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __devexit adp5588_gpio_remove(struct adp5588_kpad *kpad)
|
|
{
|
|
struct device *dev = &kpad->client->dev;
|
|
const struct adp5588_kpad_platform_data *pdata = dev->platform_data;
|
|
const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
|
|
int error;
|
|
|
|
if (!kpad->export_gpio)
|
|
return;
|
|
|
|
if (gpio_data->teardown) {
|
|
error = gpio_data->teardown(kpad->client,
|
|
kpad->gc.base, kpad->gc.ngpio,
|
|
gpio_data->context);
|
|
if (error)
|
|
dev_warn(dev, "teardown failed %d\n", error);
|
|
}
|
|
|
|
error = gpiochip_remove(&kpad->gc);
|
|
if (error)
|
|
dev_warn(dev, "gpiochip_remove failed %d\n", error);
|
|
}
|
|
#else
|
|
static inline int adp5588_gpio_add(struct adp5588_kpad *kpad)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline void adp5588_gpio_remove(struct adp5588_kpad *kpad)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
static void adp5588_report_events(struct adp5588_kpad *kpad, int ev_cnt)
|
|
{
|
|
int i, j;
|
|
|
|
for (i = 0; i < ev_cnt; i++) {
|
|
int key = adp5588_read(kpad->client, Key_EVENTA + i);
|
|
int key_val = key & KEY_EV_MASK;
|
|
|
|
if (key_val >= GPI_PIN_BASE && key_val <= GPI_PIN_END) {
|
|
for (j = 0; j < kpad->gpimapsize; j++) {
|
|
if (key_val == kpad->gpimap[j].pin) {
|
|
input_report_switch(kpad->input,
|
|
kpad->gpimap[j].sw_evt,
|
|
key & KEY_EV_PRESSED);
|
|
break;
|
|
}
|
|
}
|
|
} else {
|
|
input_report_key(kpad->input,
|
|
kpad->keycode[key_val - 1],
|
|
key & KEY_EV_PRESSED);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void adp5588_work(struct work_struct *work)
|
|
{
|
|
struct adp5588_kpad *kpad = container_of(work,
|
|
struct adp5588_kpad, work.work);
|
|
struct i2c_client *client = kpad->client;
|
|
int status, ev_cnt;
|
|
|
|
status = adp5588_read(client, INT_STAT);
|
|
|
|
if (status & OVR_FLOW_INT) /* Unlikely and should never happen */
|
|
dev_err(&client->dev, "Event Overflow Error\n");
|
|
|
|
if (status & KE_INT) {
|
|
ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & KEC;
|
|
if (ev_cnt) {
|
|
adp5588_report_events(kpad, ev_cnt);
|
|
input_sync(kpad->input);
|
|
}
|
|
}
|
|
adp5588_write(client, INT_STAT, status); /* Status is W1C */
|
|
}
|
|
|
|
static irqreturn_t adp5588_irq(int irq, void *handle)
|
|
{
|
|
struct adp5588_kpad *kpad = handle;
|
|
|
|
/*
|
|
* use keventd context to read the event fifo registers
|
|
* Schedule readout at least 25ms after notification for
|
|
* REVID < 4
|
|
*/
|
|
|
|
schedule_delayed_work(&kpad->work, kpad->delay);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int __devinit adp5588_setup(struct i2c_client *client)
|
|
{
|
|
const struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
|
|
const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
|
|
int i, ret;
|
|
unsigned char evt_mode1 = 0, evt_mode2 = 0, evt_mode3 = 0;
|
|
|
|
ret = adp5588_write(client, KP_GPIO1, KP_SEL(pdata->rows));
|
|
ret |= adp5588_write(client, KP_GPIO2, KP_SEL(pdata->cols) & 0xFF);
|
|
ret |= adp5588_write(client, KP_GPIO3, KP_SEL(pdata->cols) >> 8);
|
|
|
|
if (pdata->en_keylock) {
|
|
ret |= adp5588_write(client, UNLOCK1, pdata->unlock_key1);
|
|
ret |= adp5588_write(client, UNLOCK2, pdata->unlock_key2);
|
|
ret |= adp5588_write(client, KEY_LCK_EC_STAT, K_LCK_EN);
|
|
}
|
|
|
|
for (i = 0; i < KEYP_MAX_EVENT; i++)
|
|
ret |= adp5588_read(client, Key_EVENTA);
|
|
|
|
for (i = 0; i < pdata->gpimapsize; i++) {
|
|
unsigned short pin = pdata->gpimap[i].pin;
|
|
|
|
if (pin <= GPI_PIN_ROW_END) {
|
|
evt_mode1 |= (1 << (pin - GPI_PIN_ROW_BASE));
|
|
} else {
|
|
evt_mode2 |= ((1 << (pin - GPI_PIN_COL_BASE)) & 0xFF);
|
|
evt_mode3 |= ((1 << (pin - GPI_PIN_COL_BASE)) >> 8);
|
|
}
|
|
}
|
|
|
|
if (pdata->gpimapsize) {
|
|
ret |= adp5588_write(client, GPI_EM1, evt_mode1);
|
|
ret |= adp5588_write(client, GPI_EM2, evt_mode2);
|
|
ret |= adp5588_write(client, GPI_EM3, evt_mode3);
|
|
}
|
|
|
|
if (gpio_data) {
|
|
for (i = 0; i <= ADP_BANK(MAXGPIO); i++) {
|
|
int pull_mask = gpio_data->pullup_dis_mask;
|
|
|
|
ret |= adp5588_write(client, GPIO_PULL1 + i,
|
|
(pull_mask >> (8 * i)) & 0xFF);
|
|
}
|
|
}
|
|
|
|
ret |= adp5588_write(client, INT_STAT, CMP2_INT | CMP1_INT |
|
|
OVR_FLOW_INT | K_LCK_INT |
|
|
GPI_INT | KE_INT); /* Status is W1C */
|
|
|
|
ret |= adp5588_write(client, CFG, INT_CFG | OVR_FLOW_IEN | KE_IEN);
|
|
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "Write Error\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __devinit adp5588_report_switch_state(struct adp5588_kpad *kpad)
|
|
{
|
|
int gpi_stat1 = adp5588_read(kpad->client, GPIO_DAT_STAT1);
|
|
int gpi_stat2 = adp5588_read(kpad->client, GPIO_DAT_STAT2);
|
|
int gpi_stat3 = adp5588_read(kpad->client, GPIO_DAT_STAT3);
|
|
int gpi_stat_tmp, pin_loc;
|
|
int i;
|
|
|
|
for (i = 0; i < kpad->gpimapsize; i++) {
|
|
unsigned short pin = kpad->gpimap[i].pin;
|
|
|
|
if (pin <= GPI_PIN_ROW_END) {
|
|
gpi_stat_tmp = gpi_stat1;
|
|
pin_loc = pin - GPI_PIN_ROW_BASE;
|
|
} else if ((pin - GPI_PIN_COL_BASE) < 8) {
|
|
gpi_stat_tmp = gpi_stat2;
|
|
pin_loc = pin - GPI_PIN_COL_BASE;
|
|
} else {
|
|
gpi_stat_tmp = gpi_stat3;
|
|
pin_loc = pin - GPI_PIN_COL_BASE - 8;
|
|
}
|
|
|
|
if (gpi_stat_tmp < 0) {
|
|
dev_err(&kpad->client->dev,
|
|
"Can't read GPIO_DAT_STAT switch %d default to OFF\n",
|
|
pin);
|
|
gpi_stat_tmp = 0;
|
|
}
|
|
|
|
input_report_switch(kpad->input,
|
|
kpad->gpimap[i].sw_evt,
|
|
!(gpi_stat_tmp & (1 << pin_loc)));
|
|
}
|
|
|
|
input_sync(kpad->input);
|
|
}
|
|
|
|
|
|
static int __devinit adp5588_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct adp5588_kpad *kpad;
|
|
const struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
|
|
struct input_dev *input;
|
|
unsigned int revid;
|
|
int ret, i;
|
|
int error;
|
|
|
|
if (!i2c_check_functionality(client->adapter,
|
|
I2C_FUNC_SMBUS_BYTE_DATA)) {
|
|
dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
|
|
return -EIO;
|
|
}
|
|
|
|
if (!pdata) {
|
|
dev_err(&client->dev, "no platform data?\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!pdata->rows || !pdata->cols || !pdata->keymap) {
|
|
dev_err(&client->dev, "no rows, cols or keymap from pdata\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (pdata->keymapsize != ADP5588_KEYMAPSIZE) {
|
|
dev_err(&client->dev, "invalid keymapsize\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!pdata->gpimap && pdata->gpimapsize) {
|
|
dev_err(&client->dev, "invalid gpimap from pdata\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (pdata->gpimapsize > ADP5588_GPIMAPSIZE_MAX) {
|
|
dev_err(&client->dev, "invalid gpimapsize\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
for (i = 0; i < pdata->gpimapsize; i++) {
|
|
unsigned short pin = pdata->gpimap[i].pin;
|
|
|
|
if (pin < GPI_PIN_BASE || pin > GPI_PIN_END) {
|
|
dev_err(&client->dev, "invalid gpi pin data\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (pin <= GPI_PIN_ROW_END) {
|
|
if (pin - GPI_PIN_ROW_BASE + 1 <= pdata->rows) {
|
|
dev_err(&client->dev, "invalid gpi row data\n");
|
|
return -EINVAL;
|
|
}
|
|
} else {
|
|
if (pin - GPI_PIN_COL_BASE + 1 <= pdata->cols) {
|
|
dev_err(&client->dev, "invalid gpi col data\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (!client->irq) {
|
|
dev_err(&client->dev, "no IRQ?\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
kpad = kzalloc(sizeof(*kpad), GFP_KERNEL);
|
|
input = input_allocate_device();
|
|
if (!kpad || !input) {
|
|
error = -ENOMEM;
|
|
goto err_free_mem;
|
|
}
|
|
|
|
kpad->client = client;
|
|
kpad->input = input;
|
|
INIT_DELAYED_WORK(&kpad->work, adp5588_work);
|
|
|
|
ret = adp5588_read(client, DEV_ID);
|
|
if (ret < 0) {
|
|
error = ret;
|
|
goto err_free_mem;
|
|
}
|
|
|
|
revid = (u8) ret & ADP5588_DEVICE_ID_MASK;
|
|
if (WA_DELAYED_READOUT_REVID(revid))
|
|
kpad->delay = msecs_to_jiffies(30);
|
|
|
|
input->name = client->name;
|
|
input->phys = "adp5588-keys/input0";
|
|
input->dev.parent = &client->dev;
|
|
|
|
input_set_drvdata(input, kpad);
|
|
|
|
input->id.bustype = BUS_I2C;
|
|
input->id.vendor = 0x0001;
|
|
input->id.product = 0x0001;
|
|
input->id.version = revid;
|
|
|
|
input->keycodesize = sizeof(kpad->keycode[0]);
|
|
input->keycodemax = pdata->keymapsize;
|
|
input->keycode = kpad->keycode;
|
|
|
|
memcpy(kpad->keycode, pdata->keymap,
|
|
pdata->keymapsize * input->keycodesize);
|
|
|
|
kpad->gpimap = pdata->gpimap;
|
|
kpad->gpimapsize = pdata->gpimapsize;
|
|
|
|
/* setup input device */
|
|
__set_bit(EV_KEY, input->evbit);
|
|
|
|
if (pdata->repeat)
|
|
__set_bit(EV_REP, input->evbit);
|
|
|
|
for (i = 0; i < input->keycodemax; i++)
|
|
__set_bit(kpad->keycode[i] & KEY_MAX, input->keybit);
|
|
__clear_bit(KEY_RESERVED, input->keybit);
|
|
|
|
if (kpad->gpimapsize)
|
|
__set_bit(EV_SW, input->evbit);
|
|
for (i = 0; i < kpad->gpimapsize; i++)
|
|
__set_bit(kpad->gpimap[i].sw_evt, input->swbit);
|
|
|
|
error = input_register_device(input);
|
|
if (error) {
|
|
dev_err(&client->dev, "unable to register input device\n");
|
|
goto err_free_mem;
|
|
}
|
|
|
|
error = request_irq(client->irq, adp5588_irq,
|
|
IRQF_TRIGGER_FALLING | IRQF_DISABLED,
|
|
client->dev.driver->name, kpad);
|
|
if (error) {
|
|
dev_err(&client->dev, "irq %d busy?\n", client->irq);
|
|
goto err_unreg_dev;
|
|
}
|
|
|
|
error = adp5588_setup(client);
|
|
if (error)
|
|
goto err_free_irq;
|
|
|
|
if (kpad->gpimapsize)
|
|
adp5588_report_switch_state(kpad);
|
|
|
|
error = adp5588_gpio_add(kpad);
|
|
if (error)
|
|
goto err_free_irq;
|
|
|
|
device_init_wakeup(&client->dev, 1);
|
|
i2c_set_clientdata(client, kpad);
|
|
|
|
dev_info(&client->dev, "Rev.%d keypad, irq %d\n", revid, client->irq);
|
|
return 0;
|
|
|
|
err_free_irq:
|
|
free_irq(client->irq, kpad);
|
|
err_unreg_dev:
|
|
input_unregister_device(input);
|
|
input = NULL;
|
|
err_free_mem:
|
|
input_free_device(input);
|
|
kfree(kpad);
|
|
|
|
return error;
|
|
}
|
|
|
|
static int __devexit adp5588_remove(struct i2c_client *client)
|
|
{
|
|
struct adp5588_kpad *kpad = i2c_get_clientdata(client);
|
|
|
|
adp5588_write(client, CFG, 0);
|
|
free_irq(client->irq, kpad);
|
|
cancel_delayed_work_sync(&kpad->work);
|
|
input_unregister_device(kpad->input);
|
|
adp5588_gpio_remove(kpad);
|
|
kfree(kpad);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int adp5588_suspend(struct device *dev)
|
|
{
|
|
struct adp5588_kpad *kpad = dev_get_drvdata(dev);
|
|
struct i2c_client *client = kpad->client;
|
|
|
|
disable_irq(client->irq);
|
|
cancel_delayed_work_sync(&kpad->work);
|
|
|
|
if (device_may_wakeup(&client->dev))
|
|
enable_irq_wake(client->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adp5588_resume(struct device *dev)
|
|
{
|
|
struct adp5588_kpad *kpad = dev_get_drvdata(dev);
|
|
struct i2c_client *client = kpad->client;
|
|
|
|
if (device_may_wakeup(&client->dev))
|
|
disable_irq_wake(client->irq);
|
|
|
|
enable_irq(client->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops adp5588_dev_pm_ops = {
|
|
.suspend = adp5588_suspend,
|
|
.resume = adp5588_resume,
|
|
};
|
|
#endif
|
|
|
|
static const struct i2c_device_id adp5588_id[] = {
|
|
{ KBUILD_MODNAME, 0 },
|
|
{ "adp5587-keys", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, adp5588_id);
|
|
|
|
static struct i2c_driver adp5588_driver = {
|
|
.driver = {
|
|
.name = KBUILD_MODNAME,
|
|
#ifdef CONFIG_PM
|
|
.pm = &adp5588_dev_pm_ops,
|
|
#endif
|
|
},
|
|
.probe = adp5588_probe,
|
|
.remove = __devexit_p(adp5588_remove),
|
|
.id_table = adp5588_id,
|
|
};
|
|
|
|
static int __init adp5588_init(void)
|
|
{
|
|
return i2c_add_driver(&adp5588_driver);
|
|
}
|
|
module_init(adp5588_init);
|
|
|
|
static void __exit adp5588_exit(void)
|
|
{
|
|
i2c_del_driver(&adp5588_driver);
|
|
}
|
|
module_exit(adp5588_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
|
|
MODULE_DESCRIPTION("ADP5588/87 Keypad driver");
|
|
MODULE_ALIAS("platform:adp5588-keys");
|