android_kernel_xiaomi_sm8350/arch/mips/au1000/common/sleeper.S
Sergei Shtylyov 9370b35175 [MIPS] Save write-only Config.OD from being clobbered
Save the Config.OD bit from being clobbered by coherency_setup(). This
bit, when set, fixes various errata in the early steppings of Au1x00
SOCs.  Unfortunately, the bit was write-only on the most early of them.
In addition, also restore the bit after a wakeup from sleep.
    
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-06 00:15:13 +01:00

155 lines
3.2 KiB
ArmAsm

/*
* Copyright 2002 Embedded Edge, LLC
* Author: dan@embeddededge.com
*
* Sleep helper for Au1xxx sleep mode.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <asm/asm.h>
#include <asm/mipsregs.h>
#include <asm/addrspace.h>
#include <asm/regdef.h>
#include <asm/stackframe.h>
.text
.set macro
.set noat
.align 5
/* Save all of the processor general registers and go to sleep.
* A wakeup condition will get us back here to restore the registers.
*/
LEAF(save_and_sleep)
subu sp, PT_SIZE
sw $1, PT_R1(sp)
sw $2, PT_R2(sp)
sw $3, PT_R3(sp)
sw $4, PT_R4(sp)
sw $5, PT_R5(sp)
sw $6, PT_R6(sp)
sw $7, PT_R7(sp)
sw $8, PT_R8(sp)
sw $9, PT_R9(sp)
sw $10, PT_R10(sp)
sw $11, PT_R11(sp)
sw $12, PT_R12(sp)
sw $13, PT_R13(sp)
sw $14, PT_R14(sp)
sw $15, PT_R15(sp)
sw $16, PT_R16(sp)
sw $17, PT_R17(sp)
sw $18, PT_R18(sp)
sw $19, PT_R19(sp)
sw $20, PT_R20(sp)
sw $21, PT_R21(sp)
sw $22, PT_R22(sp)
sw $23, PT_R23(sp)
sw $24, PT_R24(sp)
sw $25, PT_R25(sp)
sw $26, PT_R26(sp)
sw $27, PT_R27(sp)
sw $28, PT_R28(sp)
sw $29, PT_R29(sp)
sw $30, PT_R30(sp)
sw $31, PT_R31(sp)
mfc0 k0, CP0_STATUS
sw k0, 0x20(sp)
mfc0 k0, CP0_CONTEXT
sw k0, 0x1c(sp)
mfc0 k0, CP0_PAGEMASK
sw k0, 0x18(sp)
mfc0 k0, CP0_CONFIG
sw k0, 0x14(sp)
/* Now set up the scratch registers so the boot rom will
* return to this point upon wakeup.
*/
la k0, 1f
lui k1, 0xb190
ori k1, 0x18
sw sp, 0(k1)
ori k1, 0x1c
sw k0, 0(k1)
/* Put SDRAM into self refresh. Preload instructions into cache,
* issue a precharge, then auto refresh, then sleep commands to it.
*/
la t0, sdsleep
.set mips3
cache 0x14, 0(t0)
cache 0x14, 32(t0)
cache 0x14, 64(t0)
cache 0x14, 96(t0)
.set mips0
sdsleep:
lui k0, 0xb400
sw zero, 0x001c(k0) /* Precharge */
sw zero, 0x0020(k0) /* Auto refresh */
sw zero, 0x0030(k0) /* SDRAM sleep */
sync
lui k1, 0xb190
sw zero, 0x0078(k1) /* get ready to sleep */
sync
sw zero, 0x007c(k1) /* Put processor to sleep */
sync
/* This is where we return upon wakeup.
* Reload all of the registers and return.
*/
1: nop
lw k0, 0x20(sp)
mtc0 k0, CP0_STATUS
lw k0, 0x1c(sp)
mtc0 k0, CP0_CONTEXT
lw k0, 0x18(sp)
mtc0 k0, CP0_PAGEMASK
lw k0, 0x14(sp)
mtc0 k0, CP0_CONFIG
/* We need to catch the ealry Alchemy SOCs with
* the write-only Config[OD] bit and set it back to one...
*/
jal au1x00_fixup_config_od
lw $1, PT_R1(sp)
lw $2, PT_R2(sp)
lw $3, PT_R3(sp)
lw $4, PT_R4(sp)
lw $5, PT_R5(sp)
lw $6, PT_R6(sp)
lw $7, PT_R7(sp)
lw $8, PT_R8(sp)
lw $9, PT_R9(sp)
lw $10, PT_R10(sp)
lw $11, PT_R11(sp)
lw $12, PT_R12(sp)
lw $13, PT_R13(sp)
lw $14, PT_R14(sp)
lw $15, PT_R15(sp)
lw $16, PT_R16(sp)
lw $17, PT_R17(sp)
lw $18, PT_R18(sp)
lw $19, PT_R19(sp)
lw $20, PT_R20(sp)
lw $21, PT_R21(sp)
lw $22, PT_R22(sp)
lw $23, PT_R23(sp)
lw $24, PT_R24(sp)
lw $25, PT_R25(sp)
lw $26, PT_R26(sp)
lw $27, PT_R27(sp)
lw $28, PT_R28(sp)
lw $29, PT_R29(sp)
lw $30, PT_R30(sp)
lw $31, PT_R31(sp)
addiu sp, PT_SIZE
jr ra
END(save_and_sleep)