android_kernel_xiaomi_sm8350/drivers/video/s1d13xxxfb.c
Hirokazu Takata 316240f66a [PATCH] m32r: framebuffer device support
This patch is for supporting Epson s1d13xxx framebuffer device for m32r.  #
Sorry, a little bigger.

The Epson s1d13806 is already supported by 2.6.12 kernel, and its driver is
placed as drivers/video/s1d13xxxfb.c.

For the m32r, a header file include/asm-m32r/s1d13806.h was prepared for
several m32r target platforms.  It was originally generated by an Epson
tool S1D13806CFG.EXE, and modified manually for the m32r platforms.

Signed-off-by: Hayato Fujiwara <fujiwara@linux-m32r.org>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:24:11 -07:00

783 lines
20 KiB
C

/* drivers/video/s1d13xxxfb.c
*
* (c) 2004 Simtec Electronics
* (c) 2005 Thibaut VARENE <varenet@parisc-linux.org>
*
* Driver for Epson S1D13xxx series framebuffer chips
*
* Adapted from
* linux/drivers/video/skeletonfb.c
* linux/drivers/video/epson1355fb.c
* linux/drivers/video/epson/s1d13xxxfb.c (2.4 driver by Epson)
*
* Note, currently only tested on S1D13806 with 16bit CRT.
* As such, this driver might still contain some hardcoded bits relating to
* S1D13806.
* Making it work on other S1D13XXX chips should merely be a matter of adding
* a few switch()s, some missing glue here and there maybe, and split header
* files.
*
* TODO: - handle dual screen display (CRT and LCD at the same time).
* - check_var(), mode change, etc.
* - PM untested.
* - Accelerated interfaces.
* - Probably not SMP safe :)
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/mm.h>
#include <linux/mman.h>
#include <linux/fb.h>
#include <asm/io.h>
#include <video/s1d13xxxfb.h>
#define PFX "s1d13xxxfb: "
#if 0
#define dbg(fmt, args...) do { printk(KERN_INFO fmt, ## args); } while(0)
#else
#define dbg(fmt, args...) do { } while (0)
#endif
/*
* Here we define the default struct fb_fix_screeninfo
*/
static struct fb_fix_screeninfo __devinitdata s1d13xxxfb_fix = {
.id = S1D_FBID,
.type = FB_TYPE_PACKED_PIXELS,
.visual = FB_VISUAL_PSEUDOCOLOR,
.xpanstep = 0,
.ypanstep = 1,
.ywrapstep = 0,
.accel = FB_ACCEL_NONE,
};
static inline u8
s1d13xxxfb_readreg(struct s1d13xxxfb_par *par, u16 regno)
{
#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_OPSPUT) || defined(CONFIG_PLAT_MAPPI3)
regno=((regno & 1) ? (regno & ~1L) : (regno + 1));
#endif
return readb(par->regs + regno);
}
static inline void
s1d13xxxfb_writereg(struct s1d13xxxfb_par *par, u16 regno, u8 value)
{
#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_OPSPUT) || defined(CONFIG_PLAT_MAPPI3)
regno=((regno & 1) ? (regno & ~1L) : (regno + 1));
#endif
writeb(value, par->regs + regno);
}
static inline void
s1d13xxxfb_runinit(struct s1d13xxxfb_par *par,
const struct s1d13xxxfb_regval *initregs,
const unsigned int size)
{
int i;
for (i = 0; i < size; i++) {
if ((initregs[i].addr == S1DREG_DELAYOFF) ||
(initregs[i].addr == S1DREG_DELAYON))
mdelay((int)initregs[i].value);
else {
s1d13xxxfb_writereg(par, initregs[i].addr, initregs[i].value);
}
}
/* make sure the hardware can cope with us */
mdelay(1);
}
static inline void
lcd_enable(struct s1d13xxxfb_par *par, int enable)
{
u8 mode = s1d13xxxfb_readreg(par, S1DREG_COM_DISP_MODE);
if (enable)
mode |= 0x01;
else
mode &= ~0x01;
s1d13xxxfb_writereg(par, S1DREG_COM_DISP_MODE, mode);
}
static inline void
crt_enable(struct s1d13xxxfb_par *par, int enable)
{
u8 mode = s1d13xxxfb_readreg(par, S1DREG_COM_DISP_MODE);
if (enable)
mode |= 0x02;
else
mode &= ~0x02;
s1d13xxxfb_writereg(par, S1DREG_COM_DISP_MODE, mode);
}
/* framebuffer control routines */
static inline void
s1d13xxxfb_setup_pseudocolour(struct fb_info *info)
{
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
info->var.red.length = 4;
info->var.green.length = 4;
info->var.blue.length = 4;
}
static inline void
s1d13xxxfb_setup_truecolour(struct fb_info *info)
{
info->fix.visual = FB_VISUAL_TRUECOLOR;
info->var.bits_per_pixel = 16;
info->var.red.length = 5;
info->var.red.offset = 11;
info->var.green.length = 6;
info->var.green.offset = 5;
info->var.blue.length = 5;
info->var.blue.offset = 0;
}
/**
* s1d13xxxfb_set_par - Alters the hardware state.
* @info: frame buffer structure
*
* Using the fb_var_screeninfo in fb_info we set the depth of the
* framebuffer. This function alters the par AND the
* fb_fix_screeninfo stored in fb_info. It doesn't not alter var in
* fb_info since we are using that data. This means we depend on the
* data in var inside fb_info to be supported by the hardware.
* xxxfb_check_var is always called before xxxfb_set_par to ensure this.
*
* XXX TODO: write proper s1d13xxxfb_check_var(), without which that
* function is quite useless.
*/
static int
s1d13xxxfb_set_par(struct fb_info *info)
{
struct s1d13xxxfb_par *s1dfb = info->par;
unsigned int val;
dbg("s1d13xxxfb_set_par: bpp=%d\n", info->var.bits_per_pixel);
if ((s1dfb->display & 0x01)) /* LCD */
val = s1d13xxxfb_readreg(s1dfb, S1DREG_LCD_DISP_MODE); /* read colour control */
else /* CRT */
val = s1d13xxxfb_readreg(s1dfb, S1DREG_CRT_DISP_MODE); /* read colour control */
val &= ~0x07;
switch (info->var.bits_per_pixel) {
case 4:
dbg("pseudo colour 4\n");
s1d13xxxfb_setup_pseudocolour(info);
val |= 2;
break;
case 8:
dbg("pseudo colour 8\n");
s1d13xxxfb_setup_pseudocolour(info);
val |= 3;
break;
case 16:
dbg("true colour\n");
s1d13xxxfb_setup_truecolour(info);
val |= 5;
break;
default:
dbg("bpp not supported!\n");
return -EINVAL;
}
dbg("writing %02x to display mode register\n", val);
if ((s1dfb->display & 0x01)) /* LCD */
s1d13xxxfb_writereg(s1dfb, S1DREG_LCD_DISP_MODE, val);
else /* CRT */
s1d13xxxfb_writereg(s1dfb, S1DREG_CRT_DISP_MODE, val);
info->fix.line_length = info->var.xres * info->var.bits_per_pixel;
info->fix.line_length /= 8;
dbg("setting line_length to %d\n", info->fix.line_length);
dbg("done setup\n");
return 0;
}
/**
* s1d13xxxfb_setcolreg - sets a color register.
* @regno: Which register in the CLUT we are programming
* @red: The red value which can be up to 16 bits wide
* @green: The green value which can be up to 16 bits wide
* @blue: The blue value which can be up to 16 bits wide.
* @transp: If supported the alpha value which can be up to 16 bits wide.
* @info: frame buffer info structure
*
* Returns negative errno on error, or zero on success.
*/
static int
s1d13xxxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
u_int transp, struct fb_info *info)
{
struct s1d13xxxfb_par *s1dfb = info->par;
unsigned int pseudo_val;
if (regno >= S1D_PALETTE_SIZE)
return -EINVAL;
dbg("s1d13xxxfb_setcolreg: %d: rgb=%d,%d,%d, tr=%d\n",
regno, red, green, blue, transp);
if (info->var.grayscale)
red = green = blue = (19595*red + 38470*green + 7471*blue) >> 16;
switch (info->fix.visual) {
case FB_VISUAL_TRUECOLOR:
if (regno >= 16)
return -EINVAL;
/* deal with creating pseudo-palette entries */
pseudo_val = (red >> 11) << info->var.red.offset;
pseudo_val |= (green >> 10) << info->var.green.offset;
pseudo_val |= (blue >> 11) << info->var.blue.offset;
dbg("s1d13xxxfb_setcolreg: pseudo %d, val %08x\n",
regno, pseudo_val);
#if defined(CONFIG_PLAT_MAPPI)
((u32 *)info->pseudo_palette)[regno] = cpu_to_le16(pseudo_val);
#else
((u32 *)info->pseudo_palette)[regno] = pseudo_val;
#endif
break;
case FB_VISUAL_PSEUDOCOLOR:
s1d13xxxfb_writereg(s1dfb, S1DREG_LKUP_ADDR, regno);
s1d13xxxfb_writereg(s1dfb, S1DREG_LKUP_DATA, red);
s1d13xxxfb_writereg(s1dfb, S1DREG_LKUP_DATA, green);
s1d13xxxfb_writereg(s1dfb, S1DREG_LKUP_DATA, blue);
break;
default:
return -ENOSYS;
}
dbg("s1d13xxxfb_setcolreg: done\n");
return 0;
}
/**
* s1d13xxxfb_blank - blanks the display.
* @blank_mode: the blank mode we want.
* @info: frame buffer structure that represents a single frame buffer
*
* Blank the screen if blank_mode != 0, else unblank. Return 0 if
* blanking succeeded, != 0 if un-/blanking failed due to e.g. a
* video mode which doesn't support it. Implements VESA suspend
* and powerdown modes on hardware that supports disabling hsync/vsync:
* blank_mode == 2: suspend vsync
* blank_mode == 3: suspend hsync
* blank_mode == 4: powerdown
*
* Returns negative errno on error, or zero on success.
*/
static int
s1d13xxxfb_blank(int blank_mode, struct fb_info *info)
{
struct s1d13xxxfb_par *par = info->par;
dbg("s1d13xxxfb_blank: blank=%d, info=%p\n", blank_mode, info);
switch (blank_mode) {
case FB_BLANK_UNBLANK:
case FB_BLANK_NORMAL:
if ((par->display & 0x01) != 0)
lcd_enable(par, 1);
if ((par->display & 0x02) != 0)
crt_enable(par, 1);
break;
case FB_BLANK_VSYNC_SUSPEND:
case FB_BLANK_HSYNC_SUSPEND:
break;
case FB_BLANK_POWERDOWN:
lcd_enable(par, 0);
crt_enable(par, 0);
break;
default:
return -EINVAL;
}
/* let fbcon do a soft blank for us */
return ((blank_mode == FB_BLANK_NORMAL) ? 1 : 0);
}
/**
* s1d13xxxfb_pan_display - Pans the display.
* @var: frame buffer variable screen structure
* @info: frame buffer structure that represents a single frame buffer
*
* Pan (or wrap, depending on the `vmode' field) the display using the
* `yoffset' field of the `var' structure (`xoffset' not yet supported).
* If the values don't fit, return -EINVAL.
*
* Returns negative errno on error, or zero on success.
*/
static int
s1d13xxxfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
{
struct s1d13xxxfb_par *par = info->par;
u32 start;
if (var->xoffset != 0) /* not yet ... */
return -EINVAL;
if (var->yoffset + info->var.yres > info->var.yres_virtual)
return -EINVAL;
start = (info->fix.line_length >> 1) * var->yoffset;
if ((par->display & 0x01)) {
/* LCD */
s1d13xxxfb_writereg(par, S1DREG_LCD_DISP_START0, (start & 0xff));
s1d13xxxfb_writereg(par, S1DREG_LCD_DISP_START1, ((start >> 8) & 0xff));
s1d13xxxfb_writereg(par, S1DREG_LCD_DISP_START2, ((start >> 16) & 0x0f));
} else {
/* CRT */
s1d13xxxfb_writereg(par, S1DREG_CRT_DISP_START0, (start & 0xff));
s1d13xxxfb_writereg(par, S1DREG_CRT_DISP_START1, ((start >> 8) & 0xff));
s1d13xxxfb_writereg(par, S1DREG_CRT_DISP_START2, ((start >> 16) & 0x0f));
}
return 0;
}
/* framebuffer information structures */
static struct fb_ops s1d13xxxfb_fbops = {
.owner = THIS_MODULE,
.fb_set_par = s1d13xxxfb_set_par,
.fb_setcolreg = s1d13xxxfb_setcolreg,
.fb_blank = s1d13xxxfb_blank,
.fb_pan_display = s1d13xxxfb_pan_display,
/* to be replaced by any acceleration we can */
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
.fb_cursor = soft_cursor
};
static int s1d13xxxfb_width_tab[2][4] __devinitdata = {
{4, 8, 16, -1},
{9, 12, 18, -1},
};
/**
* s1d13xxxfb_fetch_hw_state - Configure the framebuffer according to
* hardware setup.
* @info: frame buffer structure
*
* We setup the framebuffer structures according to the current
* hardware setup. On some machines, the BIOS will have filled
* the chip registers with such info, on others, these values will
* have been written in some init procedure. In any case, the
* software values needs to match the hardware ones. This is what
* this function ensures.
*
* Note: some of the hardcoded values here might need some love to
* work on various chips, and might need to no longer be hardcoded.
*/
static void __devinit
s1d13xxxfb_fetch_hw_state(struct fb_info *info)
{
struct fb_var_screeninfo *var = &info->var;
struct fb_fix_screeninfo *fix = &info->fix;
struct s1d13xxxfb_par *par = info->par;
u8 panel, display;
u16 offset;
u32 xres, yres;
u32 xres_virtual, yres_virtual;
int bpp, lcd_bpp;
int is_color, is_dual, is_tft;
int lcd_enabled, crt_enabled;
fix->type = FB_TYPE_PACKED_PIXELS;
/* general info */
par->display = s1d13xxxfb_readreg(par, S1DREG_COM_DISP_MODE);
crt_enabled = (par->display & 0x02) != 0;
lcd_enabled = (par->display & 0x01) != 0;
if (lcd_enabled && crt_enabled)
printk(KERN_WARNING PFX "Warning: LCD and CRT detected, using LCD\n");
if (lcd_enabled)
display = s1d13xxxfb_readreg(par, S1DREG_LCD_DISP_MODE);
else /* CRT */
display = s1d13xxxfb_readreg(par, S1DREG_CRT_DISP_MODE);
bpp = display & 0x07;
switch (bpp) {
case 2: /* 4 bpp */
case 3: /* 8 bpp */
var->bits_per_pixel = 8;
var->red.offset = var->green.offset = var->blue.offset = 0;
var->red.length = var->green.length = var->blue.length = 8;
break;
case 5: /* 16 bpp */
s1d13xxxfb_setup_truecolour(info);
break;
default:
dbg("bpp: %i\n", bpp);
}
fb_alloc_cmap(&info->cmap, 256, 0);
/* LCD info */
panel = s1d13xxxfb_readreg(par, S1DREG_PANEL_TYPE);
is_color = (panel & 0x04) != 0;
is_dual = (panel & 0x02) != 0;
is_tft = (panel & 0x01) != 0;
lcd_bpp = s1d13xxxfb_width_tab[is_tft][(panel >> 4) & 3];
if (lcd_enabled) {
xres = (s1d13xxxfb_readreg(par, S1DREG_LCD_DISP_HWIDTH) + 1) * 8;
yres = (s1d13xxxfb_readreg(par, S1DREG_LCD_DISP_VHEIGHT0) +
((s1d13xxxfb_readreg(par, S1DREG_LCD_DISP_VHEIGHT1) & 0x03) << 8) + 1);
offset = (s1d13xxxfb_readreg(par, S1DREG_LCD_MEM_OFF0) +
((s1d13xxxfb_readreg(par, S1DREG_LCD_MEM_OFF1) & 0x7) << 8));
} else { /* crt */
xres = (s1d13xxxfb_readreg(par, S1DREG_CRT_DISP_HWIDTH) + 1) * 8;
yres = (s1d13xxxfb_readreg(par, S1DREG_CRT_DISP_VHEIGHT0) +
((s1d13xxxfb_readreg(par, S1DREG_CRT_DISP_VHEIGHT1) & 0x03) << 8) + 1);
offset = (s1d13xxxfb_readreg(par, S1DREG_CRT_MEM_OFF0) +
((s1d13xxxfb_readreg(par, S1DREG_CRT_MEM_OFF1) & 0x7) << 8));
}
xres_virtual = offset * 16 / var->bits_per_pixel;
yres_virtual = fix->smem_len / (offset * 2);
var->xres = xres;
var->yres = yres;
var->xres_virtual = xres_virtual;
var->yres_virtual = yres_virtual;
var->xoffset = var->yoffset = 0;
fix->line_length = offset * 2;
var->grayscale = !is_color;
var->activate = FB_ACTIVATE_NOW;
dbg(PFX "bpp=%d, lcd_bpp=%d, "
"crt_enabled=%d, lcd_enabled=%d\n",
var->bits_per_pixel, lcd_bpp, crt_enabled, lcd_enabled);
dbg(PFX "xres=%d, yres=%d, vxres=%d, vyres=%d "
"is_color=%d, is_dual=%d, is_tft=%d\n",
xres, yres, xres_virtual, yres_virtual, is_color, is_dual, is_tft);
}
static int
s1d13xxxfb_remove(struct device *dev)
{
struct fb_info *info = dev_get_drvdata(dev);
struct platform_device *pdev = to_platform_device(dev);
struct s1d13xxxfb_par *par = NULL;
if (info) {
par = info->par;
if (par && par->regs) {
/* disable output & enable powersave */
s1d13xxxfb_writereg(par, S1DREG_COM_DISP_MODE, 0x00);
s1d13xxxfb_writereg(par, S1DREG_PS_CNF, 0x11);
iounmap(par->regs);
}
fb_dealloc_cmap(&info->cmap);
if (info->screen_base)
iounmap(info->screen_base);
framebuffer_release(info);
}
release_mem_region(pdev->resource[0].start,
pdev->resource[0].end - pdev->resource[0].start +1);
release_mem_region(pdev->resource[1].start,
pdev->resource[1].end - pdev->resource[1].start +1);
return 0;
}
static int __devinit
s1d13xxxfb_probe(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct s1d13xxxfb_par *default_par;
struct fb_info *info;
struct s1d13xxxfb_pdata *pdata = NULL;
int ret = 0;
u8 revision;
dbg("probe called: device is %p\n", dev);
printk(KERN_INFO "Epson S1D13XXX FB Driver\n");
/* enable platform-dependent hardware glue, if any */
if (dev->platform_data)
pdata = dev->platform_data;
if (pdata && pdata->platform_init_video)
pdata->platform_init_video();
if (pdev->num_resources != 2) {
dev_err(&pdev->dev, "invalid num_resources: %i\n",
pdev->num_resources);
ret = -ENODEV;
goto bail;
}
/* resource[0] is VRAM, resource[1] is registers */
if (pdev->resource[0].flags != IORESOURCE_MEM
|| pdev->resource[1].flags != IORESOURCE_MEM) {
dev_err(&pdev->dev, "invalid resource type\n");
ret = -ENODEV;
goto bail;
}
if (!request_mem_region(pdev->resource[0].start,
pdev->resource[0].end - pdev->resource[0].start +1, "s1d13xxxfb mem")) {
dev_dbg(dev, "request_mem_region failed\n");
ret = -EBUSY;
goto bail;
}
if (!request_mem_region(pdev->resource[1].start,
pdev->resource[1].end - pdev->resource[1].start +1, "s1d13xxxfb regs")) {
dev_dbg(dev, "request_mem_region failed\n");
ret = -EBUSY;
goto bail;
}
info = framebuffer_alloc(sizeof(struct s1d13xxxfb_par) + sizeof(u32) * 256, &pdev->dev);
if (!info) {
ret = -ENOMEM;
goto bail;
}
default_par = info->par;
default_par->regs = ioremap_nocache(pdev->resource[1].start,
pdev->resource[1].end - pdev->resource[1].start +1);
if (!default_par->regs) {
printk(KERN_ERR PFX "unable to map registers\n");
ret = -ENOMEM;
goto bail;
}
info->pseudo_palette = default_par->pseudo_palette;
info->screen_base = ioremap_nocache(pdev->resource[0].start,
pdev->resource[0].end - pdev->resource[0].start +1);
if (!info->screen_base) {
printk(KERN_ERR PFX "unable to map framebuffer\n");
ret = -ENOMEM;
goto bail;
}
revision = s1d13xxxfb_readreg(default_par, S1DREG_REV_CODE);
if ((revision >> 2) != S1D_CHIP_REV) {
printk(KERN_INFO PFX "chip not found: %i\n", (revision >> 2));
ret = -ENODEV;
goto bail;
}
info->fix = s1d13xxxfb_fix;
info->fix.mmio_start = pdev->resource[1].start;
info->fix.mmio_len = pdev->resource[1].end - pdev->resource[1].start +1;
info->fix.smem_start = pdev->resource[0].start;
info->fix.smem_len = pdev->resource[0].end - pdev->resource[0].start +1;
printk(KERN_INFO PFX "regs mapped at 0x%p, fb %d KiB mapped at 0x%p\n",
default_par->regs, info->fix.smem_len / 1024, info->screen_base);
info->par = default_par;
info->fbops = &s1d13xxxfb_fbops;
info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
/* perform "manual" chip initialization, if needed */
if (pdata && pdata->initregs)
s1d13xxxfb_runinit(info->par, pdata->initregs, pdata->initregssize);
s1d13xxxfb_fetch_hw_state(info);
if (register_framebuffer(info) < 0) {
ret = -EINVAL;
goto bail;
}
dev_set_drvdata(&pdev->dev, info);
printk(KERN_INFO "fb%d: %s frame buffer device\n",
info->node, info->fix.id);
return 0;
bail:
s1d13xxxfb_remove(dev);
return ret;
}
#ifdef CONFIG_PM
static int s1d13xxxfb_suspend(struct device *dev, u32 state, u32 level)
{
struct fb_info *info = dev_get_drvdata(dev);
struct s1d13xxxfb_par *s1dfb = info->par;
struct s1d13xxxfb_pdata *pdata = NULL;
/* disable display */
lcd_enable(s1dfb, 0);
crt_enable(s1dfb, 0);
if (dev->platform_data)
pdata = dev->platform_data;
#if 0
if (!s1dfb->disp_save)
s1dfb->disp_save = kmalloc(info->fix.smem_len, GFP_KERNEL);
if (!s1dfb->disp_save) {
printk(KERN_ERR PFX "no memory to save screen");
return -ENOMEM;
}
memcpy_fromio(s1dfb->disp_save, info->screen_base, info->fix.smem_len);
#else
s1dfb->disp_save = NULL;
#endif
if (!s1dfb->regs_save)
s1dfb->regs_save = kmalloc(info->fix.mmio_len, GFP_KERNEL);
if (!s1dfb->regs_save) {
printk(KERN_ERR PFX "no memory to save registers");
return -ENOMEM;
}
/* backup all registers */
memcpy_fromio(s1dfb->regs_save, s1dfb->regs, info->fix.mmio_len);
/* now activate power save mode */
s1d13xxxfb_writereg(s1dfb, S1DREG_PS_CNF, 0x11);
if (pdata && pdata->platform_suspend_video)
return pdata->platform_suspend_video();
else
return 0;
}
static int s1d13xxxfb_resume(struct device *dev, u32 level)
{
struct fb_info *info = dev_get_drvdata(dev);
struct s1d13xxxfb_par *s1dfb = info->par;
struct s1d13xxxfb_pdata *pdata = NULL;
if (level != RESUME_ENABLE)
return 0;
/* awaken the chip */
s1d13xxxfb_writereg(s1dfb, S1DREG_PS_CNF, 0x10);
/* do not let go until SDRAM "wakes up" */
while ((s1d13xxxfb_readreg(s1dfb, S1DREG_PS_STATUS) & 0x01))
udelay(10);
if (dev->platform_data)
pdata = dev->platform_data;
if (s1dfb->regs_save) {
/* will write RO regs, *should* get away with it :) */
memcpy_toio(s1dfb->regs, s1dfb->regs_save, info->fix.mmio_len);
kfree(s1dfb->regs_save);
}
if (s1dfb->disp_save) {
memcpy_toio(info->screen_base, s1dfb->disp_save,
info->fix.smem_len);
kfree(s1dfb->disp_save); /* XXX kmalloc()'d when? */
}
if ((s1dfb->display & 0x01) != 0)
lcd_enable(s1dfb, 1);
if ((s1dfb->display & 0x02) != 0)
crt_enable(s1dfb, 1);
if (pdata && pdata->platform_resume_video)
return pdata->platform_resume_video();
else
return 0;
}
#endif /* CONFIG_PM */
static struct device_driver s1d13xxxfb_driver = {
.name = S1D_DEVICENAME,
.bus = &platform_bus_type,
.probe = s1d13xxxfb_probe,
.remove = s1d13xxxfb_remove,
#ifdef CONFIG_PM
.suspend = s1d13xxxfb_suspend,
.resume = s1d13xxxfb_resume
#endif
};
static int __init
s1d13xxxfb_init(void)
{
if (fb_get_options("s1d13xxxfb", NULL))
return -ENODEV;
return driver_register(&s1d13xxxfb_driver);
}
static void __exit
s1d13xxxfb_exit(void)
{
driver_unregister(&s1d13xxxfb_driver);
}
module_init(s1d13xxxfb_init);
module_exit(s1d13xxxfb_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Framebuffer driver for S1D13xxx devices");
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>, Thibaut VARENE <varenet@parisc-linux.org>");