android_kernel_xiaomi_sm8350/drivers/mtd/devices/slram.c
Linus Torvalds a7c367b95a Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (58 commits)
  mtd: jedec_probe: add PSD4256G6V id
  mtd: OneNand support for Nomadik 8815 SoC (on NHK8815 board)
  mtd: nand: driver for Nomadik 8815 SoC (on NHK8815 board)
  m25p80: Add Spansion S25FL129P serial flashes
  jffs2: Use SLAB_HWCACHE_ALIGN for jffs2_raw_{dirent,inode} slabs
  mtd: sh_flctl: register sh_flctl using platform_driver_probe()
  mtd: nand: txx9ndfmc: transfer 512 byte at a time if possible
  mtd: nand: fix tmio_nand ecc correction
  mtd: nand: add __nand_correct_data helper function
  mtd: cfi_cmdset_0002: add 0xFF intolerance for M29W128G
  mtd: inftl: fix fold chain block number
  mtd: jedec: fix compilation problem with I28F640C3B definition
  mtd: nand: fix ECC Correction bug for SMC ordering for NDFC driver
  mtd: ofpart: Check availability of reg property instead of name property
  driver/Makefile: Initialize "mtd" and "spi" before "net"
  mtd: omap: adding DMA mode support in nand prefetch/post-write
  mtd: omap: add support for nand prefetch-read and post-write
  mtd: add nand support for w90p910 (v2)
  mtd: maps: add mtd-ram support to physmap_of
  mtd: pxa3xx_nand: add single-bit error corrections reporting
  ...
2009-09-23 10:07:49 -07:00

376 lines
9.0 KiB
C

/*======================================================================
This driver provides a method to access memory not used by the kernel
itself (i.e. if the kernel commandline mem=xxx is used). To actually
use slram at least mtdblock or mtdchar is required (for block or
character device access).
Usage:
if compiled as loadable module:
modprobe slram map=<name>,<start>,<end/offset>
if statically linked into the kernel use the following kernel cmd.line
slram=<name>,<start>,<end/offset>
<name>: name of the device that will be listed in /proc/mtd
<start>: start of the memory region, decimal or hex (0xabcdef)
<end/offset>: end of the memory region. It's possible to use +0x1234
to specify the offset instead of the absolute address
NOTE:
With slram it's only possible to map a contigous memory region. Therfore
if there's a device mapped somewhere in the region specified slram will
fail to load (see kernel log if modprobe fails).
-
Jochen Schaeuble <psionic@psionic.de>
======================================================================*/
#include <linux/module.h>
#include <asm/uaccess.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/major.h>
#include <linux/fs.h>
#include <linux/ioctl.h>
#include <linux/init.h>
#include <asm/io.h>
#include <asm/system.h>
#include <linux/mtd/mtd.h>
#define SLRAM_MAX_DEVICES_PARAMS 6 /* 3 parameters / device */
#define SLRAM_BLK_SZ 0x4000
#define T(fmt, args...) printk(KERN_DEBUG fmt, ## args)
#define E(fmt, args...) printk(KERN_NOTICE fmt, ## args)
typedef struct slram_priv {
u_char *start;
u_char *end;
} slram_priv_t;
typedef struct slram_mtd_list {
struct mtd_info *mtdinfo;
struct slram_mtd_list *next;
} slram_mtd_list_t;
#ifdef MODULE
static char *map[SLRAM_MAX_DEVICES_PARAMS];
module_param_array(map, charp, NULL, 0);
MODULE_PARM_DESC(map, "List of memory regions to map. \"map=<name>, <start>, <length / end>\"");
#else
static char *map;
#endif
static slram_mtd_list_t *slram_mtdlist = NULL;
static int slram_erase(struct mtd_info *, struct erase_info *);
static int slram_point(struct mtd_info *, loff_t, size_t, size_t *, void **,
resource_size_t *);
static void slram_unpoint(struct mtd_info *, loff_t, size_t);
static int slram_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *);
static int slram_write(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
static int slram_erase(struct mtd_info *mtd, struct erase_info *instr)
{
slram_priv_t *priv = mtd->priv;
if (instr->addr + instr->len > mtd->size) {
return(-EINVAL);
}
memset(priv->start + instr->addr, 0xff, instr->len);
/* This'll catch a few races. Free the thing before returning :)
* I don't feel at all ashamed. This kind of thing is possible anyway
* with flash, but unlikely.
*/
instr->state = MTD_ERASE_DONE;
mtd_erase_callback(instr);
return(0);
}
static int slram_point(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, void **virt, resource_size_t *phys)
{
slram_priv_t *priv = mtd->priv;
/* can we return a physical address with this driver? */
if (phys)
return -EINVAL;
if (from + len > mtd->size)
return -EINVAL;
*virt = priv->start + from;
*retlen = len;
return(0);
}
static void slram_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
{
}
static int slram_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf)
{
slram_priv_t *priv = mtd->priv;
if (from > mtd->size)
return -EINVAL;
if (from + len > mtd->size)
len = mtd->size - from;
memcpy(buf, priv->start + from, len);
*retlen = len;
return(0);
}
static int slram_write(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const u_char *buf)
{
slram_priv_t *priv = mtd->priv;
if (to + len > mtd->size)
return -EINVAL;
memcpy(priv->start + to, buf, len);
*retlen = len;
return(0);
}
/*====================================================================*/
static int register_device(char *name, unsigned long start, unsigned long length)
{
slram_mtd_list_t **curmtd;
curmtd = &slram_mtdlist;
while (*curmtd) {
curmtd = &(*curmtd)->next;
}
*curmtd = kmalloc(sizeof(slram_mtd_list_t), GFP_KERNEL);
if (!(*curmtd)) {
E("slram: Cannot allocate new MTD device.\n");
return(-ENOMEM);
}
(*curmtd)->mtdinfo = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
(*curmtd)->next = NULL;
if ((*curmtd)->mtdinfo) {
(*curmtd)->mtdinfo->priv =
kzalloc(sizeof(slram_priv_t), GFP_KERNEL);
if (!(*curmtd)->mtdinfo->priv) {
kfree((*curmtd)->mtdinfo);
(*curmtd)->mtdinfo = NULL;
}
}
if (!(*curmtd)->mtdinfo) {
E("slram: Cannot allocate new MTD device.\n");
return(-ENOMEM);
}
if (!(((slram_priv_t *)(*curmtd)->mtdinfo->priv)->start =
ioremap(start, length))) {
E("slram: ioremap failed\n");
return -EIO;
}
((slram_priv_t *)(*curmtd)->mtdinfo->priv)->end =
((slram_priv_t *)(*curmtd)->mtdinfo->priv)->start + length;
(*curmtd)->mtdinfo->name = name;
(*curmtd)->mtdinfo->size = length;
(*curmtd)->mtdinfo->flags = MTD_CAP_RAM;
(*curmtd)->mtdinfo->erase = slram_erase;
(*curmtd)->mtdinfo->point = slram_point;
(*curmtd)->mtdinfo->unpoint = slram_unpoint;
(*curmtd)->mtdinfo->read = slram_read;
(*curmtd)->mtdinfo->write = slram_write;
(*curmtd)->mtdinfo->owner = THIS_MODULE;
(*curmtd)->mtdinfo->type = MTD_RAM;
(*curmtd)->mtdinfo->erasesize = SLRAM_BLK_SZ;
(*curmtd)->mtdinfo->writesize = 1;
if (add_mtd_device((*curmtd)->mtdinfo)) {
E("slram: Failed to register new device\n");
iounmap(((slram_priv_t *)(*curmtd)->mtdinfo->priv)->start);
kfree((*curmtd)->mtdinfo->priv);
kfree((*curmtd)->mtdinfo);
return(-EAGAIN);
}
T("slram: Registered device %s from %luKiB to %luKiB\n", name,
(start / 1024), ((start + length) / 1024));
T("slram: Mapped from 0x%p to 0x%p\n",
((slram_priv_t *)(*curmtd)->mtdinfo->priv)->start,
((slram_priv_t *)(*curmtd)->mtdinfo->priv)->end);
return(0);
}
static void unregister_devices(void)
{
slram_mtd_list_t *nextitem;
while (slram_mtdlist) {
nextitem = slram_mtdlist->next;
del_mtd_device(slram_mtdlist->mtdinfo);
iounmap(((slram_priv_t *)slram_mtdlist->mtdinfo->priv)->start);
kfree(slram_mtdlist->mtdinfo->priv);
kfree(slram_mtdlist->mtdinfo);
kfree(slram_mtdlist);
slram_mtdlist = nextitem;
}
}
static unsigned long handle_unit(unsigned long value, char *unit)
{
if ((*unit == 'M') || (*unit == 'm')) {
return(value * 1024 * 1024);
} else if ((*unit == 'K') || (*unit == 'k')) {
return(value * 1024);
}
return(value);
}
static int parse_cmdline(char *devname, char *szstart, char *szlength)
{
char *buffer;
unsigned long devstart;
unsigned long devlength;
if ((!devname) || (!szstart) || (!szlength)) {
unregister_devices();
return(-EINVAL);
}
devstart = simple_strtoul(szstart, &buffer, 0);
devstart = handle_unit(devstart, buffer);
if (*(szlength) != '+') {
devlength = simple_strtoul(szlength, &buffer, 0);
devlength = handle_unit(devlength, buffer) - devstart;
if (devlength < devstart)
goto err_out;
devlength -= devstart;
} else {
devlength = simple_strtoul(szlength + 1, &buffer, 0);
devlength = handle_unit(devlength, buffer);
}
T("slram: devname=%s, devstart=0x%lx, devlength=0x%lx\n",
devname, devstart, devlength);
if (devlength % SLRAM_BLK_SZ != 0)
goto err_out;
if ((devstart = register_device(devname, devstart, devlength))){
unregister_devices();
return((int)devstart);
}
return(0);
err_out:
E("slram: Illegal length parameter.\n");
return(-EINVAL);
}
#ifndef MODULE
static int __init mtd_slram_setup(char *str)
{
map = str;
return(1);
}
__setup("slram=", mtd_slram_setup);
#endif
static int __init init_slram(void)
{
char *devname;
int i;
#ifndef MODULE
char *devstart;
char *devlength;
i = 0;
if (!map) {
E("slram: not enough parameters.\n");
return(-EINVAL);
}
while (map) {
devname = devstart = devlength = NULL;
if (!(devname = strsep(&map, ","))) {
E("slram: No devicename specified.\n");
break;
}
T("slram: devname = %s\n", devname);
if ((!map) || (!(devstart = strsep(&map, ",")))) {
E("slram: No devicestart specified.\n");
}
T("slram: devstart = %s\n", devstart);
if ((!map) || (!(devlength = strsep(&map, ",")))) {
E("slram: No devicelength / -end specified.\n");
}
T("slram: devlength = %s\n", devlength);
if (parse_cmdline(devname, devstart, devlength) != 0) {
return(-EINVAL);
}
}
#else
int count;
for (count = 0; count < SLRAM_MAX_DEVICES_PARAMS && map[count];
count++) {
}
if ((count % 3 != 0) || (count == 0)) {
E("slram: not enough parameters.\n");
return(-EINVAL);
}
for (i = 0; i < (count / 3); i++) {
devname = map[i * 3];
if (parse_cmdline(devname, map[i * 3 + 1], map[i * 3 + 2])!=0) {
return(-EINVAL);
}
}
#endif /* !MODULE */
return(0);
}
static void __exit cleanup_slram(void)
{
unregister_devices();
}
module_init(init_slram);
module_exit(cleanup_slram);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Jochen Schaeuble <psionic@psionic.de>");
MODULE_DESCRIPTION("MTD driver for uncached system RAM");