f54bef9e9c
Update the cpci690 platform code: - pass mem size in from bootwrapper via bi_rec - some minor fixups Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
457 lines
12 KiB
C
457 lines
12 KiB
C
/*
|
|
* arch/ppc/platforms/cpci690.c
|
|
*
|
|
* Board setup routines for the Force CPCI690 board.
|
|
*
|
|
* Author: Mark A. Greer <mgreer@mvista.com>
|
|
*
|
|
* 2003 (c) MontaVista Software, Inc. This file is licensed under
|
|
* the terms of the GNU General Public License version 2. This programr
|
|
* is licensed "as is" without any warranty of any kind, whether express
|
|
* or implied.
|
|
*/
|
|
#include <linux/config.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/ide.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/console.h>
|
|
#include <linux/initrd.h>
|
|
#include <linux/root_dev.h>
|
|
#include <linux/mv643xx.h>
|
|
#include <asm/bootinfo.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/todc.h>
|
|
#include <asm/time.h>
|
|
#include <asm/mv64x60.h>
|
|
#include <platforms/cpci690.h>
|
|
|
|
#define BOARD_VENDOR "Force"
|
|
#define BOARD_MACHINE "CPCI690"
|
|
|
|
/* Set IDE controllers into Native mode? */
|
|
#define SET_PCI_IDE_NATIVE
|
|
|
|
static struct mv64x60_handle bh;
|
|
static void __iomem *cpci690_br_base;
|
|
|
|
TODC_ALLOC();
|
|
|
|
static int __init
|
|
cpci690_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
|
|
{
|
|
struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
|
|
|
|
if (hose->index == 0) {
|
|
static char pci_irq_table[][4] =
|
|
/*
|
|
* PCI IDSEL/INTPIN->INTLINE
|
|
* A B C D
|
|
*/
|
|
{
|
|
{ 90, 91, 88, 89 }, /* IDSEL 30/20 - Sentinel */
|
|
};
|
|
|
|
const long min_idsel = 20, max_idsel = 20, irqs_per_slot = 4;
|
|
return PCI_IRQ_TABLE_LOOKUP;
|
|
} else {
|
|
static char pci_irq_table[][4] =
|
|
/*
|
|
* PCI IDSEL/INTPIN->INTLINE
|
|
* A B C D
|
|
*/
|
|
{
|
|
{ 93, 94, 95, 92 }, /* IDSEL 28/18 - PMC slot 2 */
|
|
{ 0, 0, 0, 0 }, /* IDSEL 29/19 - Not used */
|
|
{ 94, 95, 92, 93 }, /* IDSEL 30/20 - PMC slot 1 */
|
|
};
|
|
|
|
const long min_idsel = 18, max_idsel = 20, irqs_per_slot = 4;
|
|
return PCI_IRQ_TABLE_LOOKUP;
|
|
}
|
|
}
|
|
|
|
#define GB (1024UL * 1024UL * 1024UL)
|
|
|
|
static u32
|
|
cpci690_get_bus_freq(void)
|
|
{
|
|
if (boot_mem_size >= (1*GB)) /* bus speed based on mem size */
|
|
return 100000000;
|
|
else
|
|
return 133333333;
|
|
}
|
|
|
|
static const unsigned int cpu_750xx[32] = { /* 750FX & 750GX */
|
|
0, 0, 2, 2, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,/* 0-15*/
|
|
16, 17, 18, 19, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38, 40, 0 /*16-31*/
|
|
};
|
|
|
|
static int
|
|
cpci690_get_cpu_freq(void)
|
|
{
|
|
unsigned long pll_cfg;
|
|
|
|
pll_cfg = (mfspr(SPRN_HID1) & 0xf8000000) >> 27;
|
|
return cpci690_get_bus_freq() * cpu_750xx[pll_cfg]/2;
|
|
}
|
|
|
|
static void __init
|
|
cpci690_setup_bridge(void)
|
|
{
|
|
struct mv64x60_setup_info si;
|
|
int i;
|
|
|
|
memset(&si, 0, sizeof(si));
|
|
|
|
si.phys_reg_base = CONFIG_MV64X60_NEW_BASE;
|
|
|
|
si.pci_0.enable_bus = 1;
|
|
si.pci_0.pci_io.cpu_base = CPCI690_PCI0_IO_START_PROC_ADDR;
|
|
si.pci_0.pci_io.pci_base_hi = 0;
|
|
si.pci_0.pci_io.pci_base_lo = CPCI690_PCI0_IO_START_PCI_ADDR;
|
|
si.pci_0.pci_io.size = CPCI690_PCI0_IO_SIZE;
|
|
si.pci_0.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
|
|
si.pci_0.pci_mem[0].cpu_base = CPCI690_PCI0_MEM_START_PROC_ADDR;
|
|
si.pci_0.pci_mem[0].pci_base_hi = CPCI690_PCI0_MEM_START_PCI_HI_ADDR;
|
|
si.pci_0.pci_mem[0].pci_base_lo = CPCI690_PCI0_MEM_START_PCI_LO_ADDR;
|
|
si.pci_0.pci_mem[0].size = CPCI690_PCI0_MEM_SIZE;
|
|
si.pci_0.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
|
|
si.pci_0.pci_cmd_bits = 0;
|
|
si.pci_0.latency_timer = 0x80;
|
|
|
|
si.pci_1.enable_bus = 1;
|
|
si.pci_1.pci_io.cpu_base = CPCI690_PCI1_IO_START_PROC_ADDR;
|
|
si.pci_1.pci_io.pci_base_hi = 0;
|
|
si.pci_1.pci_io.pci_base_lo = CPCI690_PCI1_IO_START_PCI_ADDR;
|
|
si.pci_1.pci_io.size = CPCI690_PCI1_IO_SIZE;
|
|
si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
|
|
si.pci_1.pci_mem[0].cpu_base = CPCI690_PCI1_MEM_START_PROC_ADDR;
|
|
si.pci_1.pci_mem[0].pci_base_hi = CPCI690_PCI1_MEM_START_PCI_HI_ADDR;
|
|
si.pci_1.pci_mem[0].pci_base_lo = CPCI690_PCI1_MEM_START_PCI_LO_ADDR;
|
|
si.pci_1.pci_mem[0].size = CPCI690_PCI1_MEM_SIZE;
|
|
si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
|
|
si.pci_1.pci_cmd_bits = 0;
|
|
si.pci_1.latency_timer = 0x80;
|
|
|
|
for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++) {
|
|
si.cpu_prot_options[i] = 0;
|
|
si.cpu_snoop_options[i] = GT64260_CPU_SNOOP_WB;
|
|
si.pci_0.acc_cntl_options[i] =
|
|
GT64260_PCI_ACC_CNTL_DREADEN |
|
|
GT64260_PCI_ACC_CNTL_RDPREFETCH |
|
|
GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |
|
|
GT64260_PCI_ACC_CNTL_RDMULPREFETCH |
|
|
GT64260_PCI_ACC_CNTL_SWAP_NONE |
|
|
GT64260_PCI_ACC_CNTL_MBURST_32_BTYES;
|
|
si.pci_0.snoop_options[i] = GT64260_PCI_SNOOP_WB;
|
|
si.pci_1.acc_cntl_options[i] =
|
|
GT64260_PCI_ACC_CNTL_DREADEN |
|
|
GT64260_PCI_ACC_CNTL_RDPREFETCH |
|
|
GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |
|
|
GT64260_PCI_ACC_CNTL_RDMULPREFETCH |
|
|
GT64260_PCI_ACC_CNTL_SWAP_NONE |
|
|
GT64260_PCI_ACC_CNTL_MBURST_32_BTYES;
|
|
si.pci_1.snoop_options[i] = GT64260_PCI_SNOOP_WB;
|
|
}
|
|
|
|
/* Lookup PCI host bridges */
|
|
if (mv64x60_init(&bh, &si))
|
|
printk(KERN_ERR "Bridge initialization failed.\n");
|
|
|
|
pci_dram_offset = 0; /* System mem at same addr on PCI & cpu bus */
|
|
ppc_md.pci_swizzle = common_swizzle;
|
|
ppc_md.pci_map_irq = cpci690_map_irq;
|
|
ppc_md.pci_exclude_device = mv64x60_pci_exclude_device;
|
|
|
|
mv64x60_set_bus(&bh, 0, 0);
|
|
bh.hose_a->first_busno = 0;
|
|
bh.hose_a->last_busno = 0xff;
|
|
bh.hose_a->last_busno = pciauto_bus_scan(bh.hose_a, 0);
|
|
|
|
bh.hose_b->first_busno = bh.hose_a->last_busno + 1;
|
|
mv64x60_set_bus(&bh, 1, bh.hose_b->first_busno);
|
|
bh.hose_b->last_busno = 0xff;
|
|
bh.hose_b->last_busno = pciauto_bus_scan(bh.hose_b,
|
|
bh.hose_b->first_busno);
|
|
}
|
|
|
|
static void __init
|
|
cpci690_setup_peripherals(void)
|
|
{
|
|
/* Set up windows to CPLD, RTC/TODC, IPMI. */
|
|
mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN, CPCI690_BR_BASE,
|
|
CPCI690_BR_SIZE, 0);
|
|
bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN);
|
|
cpci690_br_base = ioremap(CPCI690_BR_BASE, CPCI690_BR_SIZE);
|
|
|
|
mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN, CPCI690_TODC_BASE,
|
|
CPCI690_TODC_SIZE, 0);
|
|
bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
|
|
TODC_INIT(TODC_TYPE_MK48T35, 0, 0,
|
|
ioremap(CPCI690_TODC_BASE, CPCI690_TODC_SIZE), 8);
|
|
|
|
mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN, CPCI690_IPMI_BASE,
|
|
CPCI690_IPMI_SIZE, 0);
|
|
bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN);
|
|
|
|
mv64x60_set_bits(&bh, MV64x60_PCI0_ARBITER_CNTL, (1<<31));
|
|
mv64x60_set_bits(&bh, MV64x60_PCI1_ARBITER_CNTL, (1<<31));
|
|
|
|
mv64x60_set_bits(&bh, MV64x60_CPU_MASTER_CNTL, (1<<9)); /* Only 1 cpu */
|
|
|
|
/*
|
|
* Turn off timer/counters. Not turning off watchdog timer because
|
|
* can't read its reg on the 64260A so don't know if we'll be enabling
|
|
* or disabling.
|
|
*/
|
|
mv64x60_clr_bits(&bh, MV64x60_TIMR_CNTR_0_3_CNTL,
|
|
((1<<0) | (1<<8) | (1<<16) | (1<<24)));
|
|
mv64x60_clr_bits(&bh, GT64260_TIMR_CNTR_4_7_CNTL,
|
|
((1<<0) | (1<<8) | (1<<16) | (1<<24)));
|
|
|
|
/*
|
|
* Set MPSC Multiplex RMII
|
|
* NOTE: ethernet driver modifies bit 0 and 1
|
|
*/
|
|
mv64x60_write(&bh, GT64260_MPP_SERIAL_PORTS_MULTIPLEX, 0x00001102);
|
|
|
|
#define GPP_EXTERNAL_INTERRUPTS \
|
|
((1<<24) | (1<<25) | (1<<26) | (1<<27) | \
|
|
(1<<28) | (1<<29) | (1<<30) | (1<<31))
|
|
/* PCI interrupts are inputs */
|
|
mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL, GPP_EXTERNAL_INTERRUPTS);
|
|
/* PCI interrupts are active low */
|
|
mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL, GPP_EXTERNAL_INTERRUPTS);
|
|
|
|
/* Clear any pending interrupts for these inputs and enable them. */
|
|
mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~GPP_EXTERNAL_INTERRUPTS);
|
|
mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, GPP_EXTERNAL_INTERRUPTS);
|
|
|
|
/* Route MPP interrupt inputs to GPP */
|
|
mv64x60_write(&bh, MV64x60_MPP_CNTL_2, 0x00000000);
|
|
mv64x60_write(&bh, MV64x60_MPP_CNTL_3, 0x00000000);
|
|
}
|
|
|
|
static void __init
|
|
cpci690_setup_arch(void)
|
|
{
|
|
if (ppc_md.progress)
|
|
ppc_md.progress("cpci690_setup_arch: enter", 0);
|
|
#ifdef CONFIG_BLK_DEV_INITRD
|
|
if (initrd_start)
|
|
ROOT_DEV = Root_RAM0;
|
|
else
|
|
#endif
|
|
#ifdef CONFIG_ROOT_NFS
|
|
ROOT_DEV = Root_NFS;
|
|
#else
|
|
ROOT_DEV = Root_SDA2;
|
|
#endif
|
|
|
|
if (ppc_md.progress)
|
|
ppc_md.progress("cpci690_setup_arch: Enabling L2 cache", 0);
|
|
|
|
/* Enable L2 and L3 caches (if 745x) */
|
|
_set_L2CR(_get_L2CR() | L2CR_L2E);
|
|
_set_L3CR(_get_L3CR() | L3CR_L3E);
|
|
|
|
if (ppc_md.progress)
|
|
ppc_md.progress("cpci690_setup_arch: Initializing bridge", 0);
|
|
|
|
cpci690_setup_bridge(); /* set up PCI bridge(s) */
|
|
cpci690_setup_peripherals(); /* set up chip selects/GPP/MPP etc */
|
|
|
|
if (ppc_md.progress)
|
|
ppc_md.progress("cpci690_setup_arch: bridge init complete", 0);
|
|
|
|
printk(KERN_INFO "%s %s port (C) 2003 MontaVista Software, Inc. "
|
|
"(source@mvista.com)\n", BOARD_VENDOR, BOARD_MACHINE);
|
|
|
|
if (ppc_md.progress)
|
|
ppc_md.progress("cpci690_setup_arch: exit", 0);
|
|
}
|
|
|
|
/* Platform device data fixup routines. */
|
|
#if defined(CONFIG_SERIAL_MPSC)
|
|
static void __init
|
|
cpci690_fixup_mpsc_pdata(struct platform_device *pdev)
|
|
{
|
|
struct mpsc_pdata *pdata;
|
|
|
|
pdata = (struct mpsc_pdata *)pdev->dev.platform_data;
|
|
|
|
pdata->max_idle = 40;
|
|
pdata->default_baud = CPCI690_MPSC_BAUD;
|
|
pdata->brg_clk_src = CPCI690_MPSC_CLK_SRC;
|
|
pdata->brg_clk_freq = cpci690_get_bus_freq();
|
|
}
|
|
|
|
static int __init
|
|
cpci690_platform_notify(struct device *dev)
|
|
{
|
|
static struct {
|
|
char *bus_id;
|
|
void ((*rtn)(struct platform_device *pdev));
|
|
} dev_map[] = {
|
|
{ MPSC_CTLR_NAME ".0", cpci690_fixup_mpsc_pdata },
|
|
{ MPSC_CTLR_NAME ".1", cpci690_fixup_mpsc_pdata },
|
|
};
|
|
struct platform_device *pdev;
|
|
int i;
|
|
|
|
if (dev && dev->bus_id)
|
|
for (i=0; i<ARRAY_SIZE(dev_map); i++)
|
|
if (!strncmp(dev->bus_id, dev_map[i].bus_id,
|
|
BUS_ID_SIZE)) {
|
|
|
|
pdev = container_of(dev,
|
|
struct platform_device, dev);
|
|
dev_map[i].rtn(pdev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static void
|
|
cpci690_reset_board(void)
|
|
{
|
|
u32 i = 10000;
|
|
|
|
local_irq_disable();
|
|
out_8((cpci690_br_base + CPCI690_BR_SW_RESET), 0x11);
|
|
|
|
while (i != 0) i++;
|
|
panic("restart failed\n");
|
|
}
|
|
|
|
static void
|
|
cpci690_restart(char *cmd)
|
|
{
|
|
cpci690_reset_board();
|
|
}
|
|
|
|
static void
|
|
cpci690_halt(void)
|
|
{
|
|
while (1);
|
|
/* NOTREACHED */
|
|
}
|
|
|
|
static void
|
|
cpci690_power_off(void)
|
|
{
|
|
cpci690_halt();
|
|
/* NOTREACHED */
|
|
}
|
|
|
|
static int
|
|
cpci690_show_cpuinfo(struct seq_file *m)
|
|
{
|
|
char *s;
|
|
|
|
seq_printf(m, "cpu MHz\t\t: %d\n",
|
|
(cpci690_get_cpu_freq() + 500000) / 1000000);
|
|
seq_printf(m, "bus MHz\t\t: %d\n",
|
|
(cpci690_get_bus_freq() + 500000) / 1000000);
|
|
seq_printf(m, "vendor\t\t: " BOARD_VENDOR "\n");
|
|
seq_printf(m, "machine\t\t: " BOARD_MACHINE "\n");
|
|
seq_printf(m, "FPGA Revision\t: %d\n",
|
|
in_8(cpci690_br_base + CPCI690_BR_MEM_CTLR) >> 5);
|
|
|
|
switch(bh.type) {
|
|
case MV64x60_TYPE_GT64260A:
|
|
s = "gt64260a";
|
|
break;
|
|
case MV64x60_TYPE_GT64260B:
|
|
s = "gt64260b";
|
|
break;
|
|
case MV64x60_TYPE_MV64360:
|
|
s = "mv64360";
|
|
break;
|
|
case MV64x60_TYPE_MV64460:
|
|
s = "mv64460";
|
|
break;
|
|
default:
|
|
s = "Unknown";
|
|
}
|
|
seq_printf(m, "bridge type\t: %s\n", s);
|
|
seq_printf(m, "bridge rev\t: 0x%x\n", bh.rev);
|
|
#if defined(CONFIG_NOT_COHERENT_CACHE)
|
|
seq_printf(m, "coherency\t: %s\n", "off");
|
|
#else
|
|
seq_printf(m, "coherency\t: %s\n", "on");
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __init
|
|
cpci690_calibrate_decr(void)
|
|
{
|
|
ulong freq;
|
|
|
|
freq = cpci690_get_bus_freq() / 4;
|
|
|
|
printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
|
|
freq/1000000, freq%1000000);
|
|
|
|
tb_ticks_per_jiffy = freq / HZ;
|
|
tb_to_us = mulhwu_scale_factor(freq, 1000000);
|
|
}
|
|
|
|
#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB_MPSC)
|
|
static void __init
|
|
cpci690_map_io(void)
|
|
{
|
|
io_block_mapping(CONFIG_MV64X60_NEW_BASE, CONFIG_MV64X60_NEW_BASE,
|
|
128 * 1024, _PAGE_IO);
|
|
}
|
|
#endif
|
|
|
|
void __init
|
|
platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
|
|
unsigned long r6, unsigned long r7)
|
|
{
|
|
parse_bootinfo(find_bootinfo());
|
|
|
|
#ifdef CONFIG_BLK_DEV_INITRD
|
|
/* take care of initrd if we have one */
|
|
if (r4) {
|
|
initrd_start = r4 + KERNELBASE;
|
|
initrd_end = r5 + KERNELBASE;
|
|
}
|
|
#endif /* CONFIG_BLK_DEV_INITRD */
|
|
|
|
isa_mem_base = 0;
|
|
|
|
ppc_md.setup_arch = cpci690_setup_arch;
|
|
ppc_md.show_cpuinfo = cpci690_show_cpuinfo;
|
|
ppc_md.init_IRQ = gt64260_init_irq;
|
|
ppc_md.get_irq = gt64260_get_irq;
|
|
ppc_md.restart = cpci690_restart;
|
|
ppc_md.power_off = cpci690_power_off;
|
|
ppc_md.halt = cpci690_halt;
|
|
ppc_md.time_init = todc_time_init;
|
|
ppc_md.set_rtc_time = todc_set_rtc_time;
|
|
ppc_md.get_rtc_time = todc_get_rtc_time;
|
|
ppc_md.nvram_read_val = todc_direct_read_val;
|
|
ppc_md.nvram_write_val = todc_direct_write_val;
|
|
ppc_md.calibrate_decr = cpci690_calibrate_decr;
|
|
|
|
#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB_MPSC)
|
|
ppc_md.setup_io_mappings = cpci690_map_io;
|
|
#ifdef CONFIG_SERIAL_TEXT_DEBUG
|
|
ppc_md.progress = mv64x60_mpsc_progress;
|
|
mv64x60_progress_init(CONFIG_MV64X60_NEW_BASE);
|
|
#endif /* CONFIG_SERIAL_TEXT_DEBUG */
|
|
#endif /* defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB_MPSC) */
|
|
|
|
#if defined(CONFIG_SERIAL_MPSC)
|
|
platform_notify = cpci690_platform_notify;
|
|
#endif
|
|
}
|