a09e64fbc0
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
350 lines
8.9 KiB
C
350 lines
8.9 KiB
C
/*
|
|
* eti_b1_wm8731 -- SoC audio for AT91RM9200-based Endrelia ETI_B1 board.
|
|
*
|
|
* Author: Frank Mandarino <fmandarino@endrelia.com>
|
|
* Endrelia Technologies Inc.
|
|
* Created: Mar 29, 2006
|
|
*
|
|
* Based on corgi.c by:
|
|
*
|
|
* Copyright 2005 Wolfson Microelectronics PLC.
|
|
* Copyright 2005 Openedhand Ltd.
|
|
*
|
|
* Authors: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
|
|
* Richard Purdie <richard@openedhand.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/version.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/soc-dapm.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <mach/gpio.h>
|
|
|
|
#include "../codecs/wm8731.h"
|
|
#include "at91-pcm.h"
|
|
#include "at91-ssc.h"
|
|
|
|
#if 0
|
|
#define DBG(x...) printk(KERN_INFO "eti_b1_wm8731: " x)
|
|
#else
|
|
#define DBG(x...)
|
|
#endif
|
|
|
|
static struct clk *pck1_clk;
|
|
static struct clk *pllb_clk;
|
|
|
|
|
|
static int eti_b1_startup(struct snd_pcm_substream *substream)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
|
struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
|
|
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
|
|
int ret;
|
|
|
|
/* cpu clock is the AT91 master clock sent to the SSC */
|
|
ret = snd_soc_dai_set_sysclk(cpu_dai, AT91_SYSCLK_MCK,
|
|
60000000, SND_SOC_CLOCK_IN);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* codec system clock is supplied by PCK1, set to 12MHz */
|
|
ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK,
|
|
12000000, SND_SOC_CLOCK_IN);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Start PCK1 clock. */
|
|
clk_enable(pck1_clk);
|
|
DBG("pck1 started\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void eti_b1_shutdown(struct snd_pcm_substream *substream)
|
|
{
|
|
/* Stop PCK1 clock. */
|
|
clk_disable(pck1_clk);
|
|
DBG("pck1 stopped\n");
|
|
}
|
|
|
|
static int eti_b1_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
|
struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
|
|
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
|
|
int ret;
|
|
|
|
#ifdef CONFIG_SND_AT91_SOC_ETI_SLAVE
|
|
unsigned int rate;
|
|
int cmr_div, period;
|
|
|
|
/* set codec DAI configuration */
|
|
ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
|
|
SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* set cpu DAI configuration */
|
|
ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
|
|
SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* The SSC clock dividers depend on the sample rate. The CMR.DIV
|
|
* field divides the system master clock MCK to drive the SSC TK
|
|
* signal which provides the codec BCLK. The TCMR.PERIOD and
|
|
* RCMR.PERIOD fields further divide the BCLK signal to drive
|
|
* the SSC TF and RF signals which provide the codec DACLRC and
|
|
* ADCLRC clocks.
|
|
*
|
|
* The dividers were determined through trial and error, where a
|
|
* CMR.DIV value is chosen such that the resulting BCLK value is
|
|
* divisible, or almost divisible, by (2 * sample rate), and then
|
|
* the TCMR.PERIOD or RCMR.PERIOD is BCLK / (2 * sample rate) - 1.
|
|
*/
|
|
rate = params_rate(params);
|
|
|
|
switch (rate) {
|
|
case 8000:
|
|
cmr_div = 25; /* BCLK = 60MHz/(2*25) = 1.2MHz */
|
|
period = 74; /* LRC = BCLK/(2*(74+1)) = 8000Hz */
|
|
break;
|
|
case 32000:
|
|
cmr_div = 7; /* BCLK = 60MHz/(2*7) ~= 4.28571428MHz */
|
|
period = 66; /* LRC = BCLK/(2*(66+1)) = 31982.942Hz */
|
|
break;
|
|
case 48000:
|
|
cmr_div = 13; /* BCLK = 60MHz/(2*13) ~= 2.3076923MHz */
|
|
period = 23; /* LRC = BCLK/(2*(23+1)) = 48076.923Hz */
|
|
break;
|
|
default:
|
|
printk(KERN_WARNING "unsupported rate %d on ETI-B1 board\n", rate);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* set the MCK divider for BCLK */
|
|
ret = snd_soc_dai_set_clkdiv(cpu_dai, AT91SSC_CMR_DIV, cmr_div);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
|
|
/* set the BCLK divider for DACLRC */
|
|
ret = snd_soc_dai_set_clkdiv(cpu_dai,
|
|
AT91SSC_TCMR_PERIOD, period);
|
|
} else {
|
|
/* set the BCLK divider for ADCLRC */
|
|
ret = snd_soc_dai_set_clkdiv(cpu_dai,
|
|
AT91SSC_RCMR_PERIOD, period);
|
|
}
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
#else /* CONFIG_SND_AT91_SOC_ETI_SLAVE */
|
|
/*
|
|
* Codec in Master Mode.
|
|
*/
|
|
|
|
/* set codec DAI configuration */
|
|
ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
|
|
SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* set cpu DAI configuration */
|
|
ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
|
|
SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
#endif /* CONFIG_SND_AT91_SOC_ETI_SLAVE */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct snd_soc_ops eti_b1_ops = {
|
|
.startup = eti_b1_startup,
|
|
.hw_params = eti_b1_hw_params,
|
|
.shutdown = eti_b1_shutdown,
|
|
};
|
|
|
|
|
|
static const struct snd_soc_dapm_widget eti_b1_dapm_widgets[] = {
|
|
SND_SOC_DAPM_MIC("Int Mic", NULL),
|
|
SND_SOC_DAPM_SPK("Ext Spk", NULL),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route intercon[] = {
|
|
|
|
/* speaker connected to LHPOUT */
|
|
{"Ext Spk", NULL, "LHPOUT"},
|
|
|
|
/* mic is connected to Mic Jack, with WM8731 Mic Bias */
|
|
{"MICIN", NULL, "Mic Bias"},
|
|
{"Mic Bias", NULL, "Int Mic"},
|
|
};
|
|
|
|
/*
|
|
* Logic for a wm8731 as connected on a Endrelia ETI-B1 board.
|
|
*/
|
|
static int eti_b1_wm8731_init(struct snd_soc_codec *codec)
|
|
{
|
|
DBG("eti_b1_wm8731_init() called\n");
|
|
|
|
/* Add specific widgets */
|
|
snd_soc_dapm_new_controls(codec, eti_b1_dapm_widgets,
|
|
ARRAY_SIZE(eti_b1_dapm_widgets));
|
|
|
|
/* Set up specific audio path interconnects */
|
|
snd_soc_dapm_add_route(codec, intercon, ARRAY_SIZE(intercon));
|
|
|
|
/* not connected */
|
|
snd_soc_dapm_disable_pin(codec, "RLINEIN");
|
|
snd_soc_dapm_disable_pin(codec, "LLINEIN");
|
|
|
|
/* always connected */
|
|
snd_soc_dapm_enable_pin(codec, "Int Mic");
|
|
snd_soc_dapm_enable_pin(codec, "Ext Spk");
|
|
|
|
snd_soc_dapm_sync(codec);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct snd_soc_dai_link eti_b1_dai = {
|
|
.name = "WM8731",
|
|
.stream_name = "WM8731 PCM",
|
|
.cpu_dai = &at91_ssc_dai[1],
|
|
.codec_dai = &wm8731_dai,
|
|
.init = eti_b1_wm8731_init,
|
|
.ops = &eti_b1_ops,
|
|
};
|
|
|
|
static struct snd_soc_machine snd_soc_machine_eti_b1 = {
|
|
.name = "ETI_B1_WM8731",
|
|
.dai_link = &eti_b1_dai,
|
|
.num_links = 1,
|
|
};
|
|
|
|
static struct wm8731_setup_data eti_b1_wm8731_setup = {
|
|
.i2c_address = 0x1a,
|
|
};
|
|
|
|
static struct snd_soc_device eti_b1_snd_devdata = {
|
|
.machine = &snd_soc_machine_eti_b1,
|
|
.platform = &at91_soc_platform,
|
|
.codec_dev = &soc_codec_dev_wm8731,
|
|
.codec_data = &eti_b1_wm8731_setup,
|
|
};
|
|
|
|
static struct platform_device *eti_b1_snd_device;
|
|
|
|
static int __init eti_b1_init(void)
|
|
{
|
|
int ret;
|
|
struct at91_ssc_periph *ssc = eti_b1_dai.cpu_dai->private_data;
|
|
|
|
if (!request_mem_region(AT91RM9200_BASE_SSC1, SZ_16K, "soc-audio")) {
|
|
DBG("SSC1 memory region is busy\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
ssc->base = ioremap(AT91RM9200_BASE_SSC1, SZ_16K);
|
|
if (!ssc->base) {
|
|
DBG("SSC1 memory ioremap failed\n");
|
|
ret = -ENOMEM;
|
|
goto fail_release_mem;
|
|
}
|
|
|
|
ssc->pid = AT91RM9200_ID_SSC1;
|
|
|
|
eti_b1_snd_device = platform_device_alloc("soc-audio", -1);
|
|
if (!eti_b1_snd_device) {
|
|
DBG("platform device allocation failed\n");
|
|
ret = -ENOMEM;
|
|
goto fail_io_unmap;
|
|
}
|
|
|
|
platform_set_drvdata(eti_b1_snd_device, &eti_b1_snd_devdata);
|
|
eti_b1_snd_devdata.dev = &eti_b1_snd_device->dev;
|
|
|
|
ret = platform_device_add(eti_b1_snd_device);
|
|
if (ret) {
|
|
DBG("platform device add failed\n");
|
|
platform_device_put(eti_b1_snd_device);
|
|
goto fail_io_unmap;
|
|
}
|
|
|
|
at91_set_A_periph(AT91_PIN_PB6, 0); /* TF1 */
|
|
at91_set_A_periph(AT91_PIN_PB7, 0); /* TK1 */
|
|
at91_set_A_periph(AT91_PIN_PB8, 0); /* TD1 */
|
|
at91_set_A_periph(AT91_PIN_PB9, 0); /* RD1 */
|
|
/* at91_set_A_periph(AT91_PIN_PB10, 0);*/ /* RK1 */
|
|
at91_set_A_periph(AT91_PIN_PB11, 0); /* RF1 */
|
|
|
|
/*
|
|
* Set PCK1 parent to PLLB and its rate to 12 Mhz.
|
|
*/
|
|
pllb_clk = clk_get(NULL, "pllb");
|
|
pck1_clk = clk_get(NULL, "pck1");
|
|
|
|
clk_set_parent(pck1_clk, pllb_clk);
|
|
clk_set_rate(pck1_clk, 12000000);
|
|
|
|
DBG("MCLK rate %luHz\n", clk_get_rate(pck1_clk));
|
|
|
|
/* assign the GPIO pin to PCK1 */
|
|
at91_set_B_periph(AT91_PIN_PA24, 0);
|
|
|
|
#ifdef CONFIG_SND_AT91_SOC_ETI_SLAVE
|
|
printk(KERN_INFO "eti_b1_wm8731: Codec in Slave Mode\n");
|
|
#else
|
|
printk(KERN_INFO "eti_b1_wm8731: Codec in Master Mode\n");
|
|
#endif
|
|
return ret;
|
|
|
|
fail_io_unmap:
|
|
iounmap(ssc->base);
|
|
fail_release_mem:
|
|
release_mem_region(AT91RM9200_BASE_SSC1, SZ_16K);
|
|
return ret;
|
|
}
|
|
|
|
static void __exit eti_b1_exit(void)
|
|
{
|
|
struct at91_ssc_periph *ssc = eti_b1_dai.cpu_dai->private_data;
|
|
|
|
clk_put(pck1_clk);
|
|
clk_put(pllb_clk);
|
|
|
|
platform_device_unregister(eti_b1_snd_device);
|
|
|
|
iounmap(ssc->base);
|
|
release_mem_region(AT91RM9200_BASE_SSC1, SZ_16K);
|
|
}
|
|
|
|
module_init(eti_b1_init);
|
|
module_exit(eti_b1_exit);
|
|
|
|
/* Module information */
|
|
MODULE_AUTHOR("Frank Mandarino <fmandarino@endrelia.com>");
|
|
MODULE_DESCRIPTION("ALSA SoC ETI-B1-WM8731");
|
|
MODULE_LICENSE("GPL");
|