1bc4faa59b
Some current configs turn on GRU for ia64. The GRU code does not correctly load on boot on ia64 (GRU does continue to work for x86-64), so changing the IA64 Kconfig to not select GRU on ia64 configs for now until we have time to fix. Signed-off-by: Robin Holt <holt@sgi.com> Acked-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
240 lines
8.1 KiB
Plaintext
240 lines
8.1 KiB
Plaintext
#
|
|
# Misc strange devices
|
|
#
|
|
|
|
menuconfig MISC_DEVICES
|
|
bool "Misc devices"
|
|
default y
|
|
---help---
|
|
Say Y here to get to see options for device drivers from various
|
|
different categories. This option alone does not add any kernel code.
|
|
|
|
If you say N, all options in this submenu will be skipped and disabled.
|
|
|
|
if MISC_DEVICES
|
|
|
|
config ATMEL_PWM
|
|
tristate "Atmel AT32/AT91 PWM support"
|
|
depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9
|
|
help
|
|
This option enables device driver support for the PWM channels
|
|
on certain Atmel prcoessors. Pulse Width Modulation is used for
|
|
purposes including software controlled power-efficent backlights
|
|
on LCD displays, motor control, and waveform generation.
|
|
|
|
config ATMEL_TCLIB
|
|
bool "Atmel AT32/AT91 Timer/Counter Library"
|
|
depends on (AVR32 || ARCH_AT91)
|
|
help
|
|
Select this if you want a library to allocate the Timer/Counter
|
|
blocks found on many Atmel processors. This facilitates using
|
|
these blocks by different drivers despite processor differences.
|
|
|
|
config ATMEL_TCB_CLKSRC
|
|
bool "TC Block Clocksource"
|
|
depends on ATMEL_TCLIB && GENERIC_TIME
|
|
default y
|
|
help
|
|
Select this to get a high precision clocksource based on a
|
|
TC block with a 5+ MHz base clock rate. Two timer channels
|
|
are combined to make a single 32-bit timer.
|
|
|
|
When GENERIC_CLOCKEVENTS is defined, the third timer channel
|
|
may be used as a clock event device supporting oneshot mode
|
|
(delays of up to two seconds) based on the 32 KiHz clock.
|
|
|
|
config ATMEL_TCB_CLKSRC_BLOCK
|
|
int
|
|
depends on ATMEL_TCB_CLKSRC
|
|
prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X
|
|
default 0
|
|
range 0 1
|
|
help
|
|
Some chips provide more than one TC block, so you have the
|
|
choice of which one to use for the clock framework. The other
|
|
TC can be used for other purposes, such as PWM generation and
|
|
interval timing.
|
|
|
|
config IBM_ASM
|
|
tristate "Device driver for IBM RSA service processor"
|
|
depends on X86 && PCI && INPUT && EXPERIMENTAL
|
|
---help---
|
|
This option enables device driver support for in-band access to the
|
|
IBM RSA (Condor) service processor in eServer xSeries systems.
|
|
The ibmasm device driver allows user space application to access
|
|
ASM (Advanced Systems Management) functions on the service
|
|
processor. The driver is meant to be used in conjunction with
|
|
a user space API.
|
|
The ibmasm driver also enables the OS to use the UART on the
|
|
service processor board as a regular serial port. To make use of
|
|
this feature serial driver support (CONFIG_SERIAL_8250) must be
|
|
enabled.
|
|
|
|
WARNING: This software may not be supported or function
|
|
correctly on your IBM server. Please consult the IBM ServerProven
|
|
website <http://www.pc.ibm.com/ww/eserver/xseries/serverproven> for
|
|
information on the specific driver level and support statement
|
|
for your IBM server.
|
|
|
|
config PHANTOM
|
|
tristate "Sensable PHANToM (PCI)"
|
|
depends on PCI
|
|
help
|
|
Say Y here if you want to build a driver for Sensable PHANToM device.
|
|
|
|
This driver is only for PCI PHANToMs.
|
|
|
|
If you choose to build module, its name will be phantom. If unsure,
|
|
say N here.
|
|
|
|
config SGI_IOC4
|
|
tristate "SGI IOC4 Base IO support"
|
|
depends on PCI
|
|
---help---
|
|
This option enables basic support for the IOC4 chip on certain
|
|
SGI IO controller cards (IO9, IO10, and PCI-RT). This option
|
|
does not enable any specific functions on such a card, but provides
|
|
necessary infrastructure for other drivers to utilize.
|
|
|
|
If you have an SGI Altix with an IOC4-based card say Y.
|
|
Otherwise say N.
|
|
|
|
config TIFM_CORE
|
|
tristate "TI Flash Media interface support (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL && PCI
|
|
help
|
|
If you want support for Texas Instruments(R) Flash Media adapters
|
|
you should select this option and then also choose an appropriate
|
|
host adapter, such as 'TI Flash Media PCI74xx/PCI76xx host adapter
|
|
support', if you have a TI PCI74xx compatible card reader, for
|
|
example.
|
|
You will also have to select some flash card format drivers. MMC/SD
|
|
cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD
|
|
Interface support (MMC_TIFM_SD)'.
|
|
|
|
To compile this driver as a module, choose M here: the module will
|
|
be called tifm_core.
|
|
|
|
config TIFM_7XX1
|
|
tristate "TI Flash Media PCI74xx/PCI76xx host adapter support (EXPERIMENTAL)"
|
|
depends on PCI && TIFM_CORE && EXPERIMENTAL
|
|
default TIFM_CORE
|
|
help
|
|
This option enables support for Texas Instruments(R) PCI74xx and
|
|
PCI76xx families of Flash Media adapters, found in many laptops.
|
|
To make actual use of the device, you will have to select some
|
|
flash card format drivers, as outlined in the TIFM_CORE Help.
|
|
|
|
To compile this driver as a module, choose M here: the module will
|
|
be called tifm_7xx1.
|
|
|
|
config ICS932S401
|
|
tristate "Integrated Circuits ICS932S401"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the Integrated Circuits
|
|
ICS932S401 clock control chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ics932s401.
|
|
|
|
config ATMEL_SSC
|
|
tristate "Device driver for Atmel SSC peripheral"
|
|
depends on AVR32 || ARCH_AT91
|
|
---help---
|
|
This option enables device driver support for Atmel Syncronized
|
|
Serial Communication peripheral (SSC).
|
|
|
|
The SSC peripheral supports a wide variety of serial frame based
|
|
communications, i.e. I2S, SPI, etc.
|
|
|
|
If unsure, say N.
|
|
|
|
config ENCLOSURE_SERVICES
|
|
tristate "Enclosure Services"
|
|
default n
|
|
help
|
|
Provides support for intelligent enclosures (bays which
|
|
contain storage devices). You also need either a host
|
|
driver (SCSI/ATA) which supports enclosures
|
|
or a SCSI enclosure device (SES) to use these services.
|
|
|
|
config SGI_XP
|
|
tristate "Support communication between SGI SSIs"
|
|
depends on NET
|
|
depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_UV) && SMP
|
|
select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
|
|
select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
|
|
select SGI_GRU if X86_64 && SMP
|
|
---help---
|
|
An SGI machine can be divided into multiple Single System
|
|
Images which act independently of each other and have
|
|
hardware based memory protection from the others. Enabling
|
|
this feature will allow for direct communication between SSIs
|
|
based on a network adapter and DMA messaging.
|
|
|
|
config HP_ILO
|
|
tristate "Channel interface driver for HP iLO/iLO2 processor"
|
|
depends on PCI
|
|
default n
|
|
help
|
|
The channel interface driver allows applications to communicate
|
|
with iLO/iLO2 management processors present on HP ProLiant
|
|
servers. Upon loading, the driver creates /dev/hpilo/dXccbN files,
|
|
which can be used to gather data from the management processor,
|
|
via read and write system calls.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called hpilo.
|
|
|
|
config SGI_GRU
|
|
tristate "SGI GRU driver"
|
|
depends on X86_UV && SMP
|
|
default n
|
|
select MMU_NOTIFIER
|
|
---help---
|
|
The GRU is a hardware resource located in the system chipset. The GRU
|
|
contains memory that can be mmapped into the user address space. This memory is
|
|
used to communicate with the GRU to perform functions such as load/store,
|
|
scatter/gather, bcopy, AMOs, etc. The GRU is directly accessed by user
|
|
instructions using user virtual addresses. GRU instructions (ex., bcopy) use
|
|
user virtual addresses for operands.
|
|
|
|
If you are not running on a SGI UV system, say N.
|
|
|
|
config SGI_GRU_DEBUG
|
|
bool "SGI GRU driver debug"
|
|
depends on SGI_GRU
|
|
default n
|
|
---help---
|
|
This option enables addition debugging code for the SGI GRU driver. If
|
|
you are unsure, say N.
|
|
|
|
config DELL_LAPTOP
|
|
tristate "Dell Laptop Extras (EXPERIMENTAL)"
|
|
depends on X86
|
|
depends on DCDBAS
|
|
depends on EXPERIMENTAL
|
|
depends on BACKLIGHT_CLASS_DEVICE
|
|
depends on RFKILL
|
|
depends on POWER_SUPPLY
|
|
default n
|
|
---help---
|
|
This driver adds support for rfkill and backlight control to Dell
|
|
laptops.
|
|
|
|
config ISL29003
|
|
tristate "Intersil ISL29003 ambient light sensor"
|
|
depends on I2C && SYSFS
|
|
help
|
|
If you say yes here you get support for the Intersil ISL29003
|
|
ambient light sensor.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called isl29003.
|
|
|
|
source "drivers/misc/c2port/Kconfig"
|
|
source "drivers/misc/eeprom/Kconfig"
|
|
|
|
endif # MISC_DEVICES
|