android_kernel_xiaomi_sm8350/arch/arm/mach-s3c2443/s3c2443.c
Ben Dooks 74b265d4e0 [ARM] S3C24XX: Move initialisation code to arch/arm/plat-s3c
We need to add plat-s3c to the build to get the headers
that will go in here once moved from include/asm-arm so
we may as well put some useful common s3c code in here
to stop the errors generated form having nothing built.

The cpu setup is now passed the cpu idcode and the table
of supported cpus to s3c_init_cpu() to abstract the
cpu identification out of the initial io setup.

As well as moving the cpu initialisation code, we move the
map of the board specific items up to the calling code as
none of the map_io() functions actually do anything other
than pass this to iotable_init().

This patch does not rename any of the init functions that
will be common to s3c24xx and any other s3c architectures
as this can be done at a later date as it will touch all
the board support files which use functions such as
s3c24xx_init_clocks() and s3c24xx_init_uarts().

Note, the header arch/arm/plat-s3c24xx/include/plat/cpu.h
still has functions that are used by both the cpu and
board initialisation functions. This means that each board
has definitions specific to the cpu support included and
the vice-versa.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:45:57 +00:00

101 lines
2.4 KiB
C

/* linux/arch/arm/mach-s3c2443/s3c2443.c
*
* Copyright (c) 2007 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* Samsung S3C2443 Mobile CPU support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/sysdev.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <mach/regs-s3c2443-clock.h>
#include <mach/reset.h>
#include <plat/s3c2443.h>
#include <plat/devs.h>
#include <plat/cpu.h>
static struct map_desc s3c2443_iodesc[] __initdata = {
IODESC_ENT(WATCHDOG),
IODESC_ENT(CLKPWR),
IODESC_ENT(TIMER),
};
struct sysdev_class s3c2443_sysclass = {
.name = "s3c2443-core",
};
static struct sys_device s3c2443_sysdev = {
.cls = &s3c2443_sysclass,
};
static void s3c2443_hard_reset(void)
{
__raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST);
}
int __init s3c2443_init(void)
{
printk("S3C2443: Initialising architecture\n");
s3c24xx_reset_hook = s3c2443_hard_reset;
s3c_device_nand.name = "s3c2412-nand";
/* change WDT IRQ number */
s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT;
return sysdev_register(&s3c2443_sysdev);
}
void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
}
/* s3c2443_map_io
*
* register the standard cpu IO areas, and any passed in from the
* machine specific initialisation.
*/
void __init s3c2443_map_io(void)
{
iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
}
/* need to register class before we actually register the device, and
* we also need to ensure that it has been initialised before any of the
* drivers even try to use it (even if not on an s3c2443 based system)
* as a driver which may support both 2443 and 2440 may try and use it.
*/
static int __init s3c2443_core_init(void)
{
return sysdev_class_register(&s3c2443_sysclass);
}
core_initcall(s3c2443_core_init);