Dmitry Baryshkov 5cbff9603a [ARM] corgi_lcd: fix simultaneous compilation with corgi_bl ... corgi_lcd has symbol conflict with corgi_bl driver. Fix it by renaming common symbol in new corgi_lcd driver. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>		2008-10-29 11:45:37 +08:00
..
audio.h
bitfield.h
camera.h	V4L/DVB (8687): soc-camera: Move .power and .reset from soc_camera host to sensor driver	2008-10-12 09:36:50 -02:00
colibri.h
corgi.h	Revert "[ARM] pxa/corgi: remove now unused corgi_ssp.c and corgi_lcd.c"	2008-10-21 09:42:29 +08:00
debug-macro.S
dma.h
entry-macro.S	[ARM] 5233/1: Allow PXA to have ISA IRQs numbered 0-15	2008-09-01 17:13:26 +01:00
eseries-gpio.h
eseries-irq.h
gpio.h
gumstix.h
hardware.h	Merge branch 'pxa-all' into devel	2008-10-09 21:33:02 +01:00
i2c.h	[ARM] 5278/1: i2c-pxa fast mode support	2008-10-03 15:57:06 +01:00
idp.h
io.h
irda.h
irqs.h	[ARM] pxa: fix redefinition of NR_IRQS	2008-10-17 13:19:08 +01:00
littleton.h	[ARM] pxa/littleton: add support for SPI-based TDO24M LCD panel driver	2008-09-23 22:04:38 +01:00
lpd270.h
lubbock.h
magician.h
mainstone.h
memory.h	[ARM] 5280/1: pxa: prepare cm-x2xx.c and cm-x2xx-pci.[ch] for addition of CM-X255	2008-10-07 12:05:05 +01:00
mfp-pxa2xx.h
mfp-pxa3xx.h
mfp-pxa25x.h	[ARM] pxa: fix typo in pxa25x MFP definitions	2008-09-26 23:43:20 +01:00
mfp-pxa27x.h
mfp-pxa300.h
mfp-pxa320.h	[ARM] pxa: fix incorrect definitions of SSP3 on pxa320	2008-08-26 17:02:00 +01:00
mfp-pxa930.h
mfp.h	[ARM] pxa: better MFP low power state support for pxa25x/pxa27x	2008-09-26 23:43:20 +01:00
mioa701.h
mmc.h
mtd-xip.h
ohci.h	[ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers	2008-10-07 19:12:57 +01:00
palmtx.h
palmz72.h	[ARM] 5239/1: Palm Zire 72 power management support	2008-10-09 15:12:07 +01:00
pcm027.h
pcm990_baseboard.h
pm.h	[ARM] pxa: Allow platforms to override PSPR setting	2008-09-09 16:32:52 +01:00
poodle.h	[ARM] pxa/poodle: prepare scoop for the generic GPIO API	2008-09-23 22:04:38 +01:00
pxa2xx_spi.h
pxa2xx-gpio.h
pxa2xx-regs.h
pxa3xx_nand.h	[MTD] [NAND] pxa3xx_nand: moved some helper variables out from platform data	2008-09-01 21:38:34 +01:00
pxa3xx-regs.h	[ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h	2008-10-07 19:12:59 +01:00
pxa25x-udc.h
pxa27x_keypad.h
pxa27x-udc.h
pxa-regs.h	[ARM] ohci-pxa27x: move OHCI controller specific registers into the driver	2008-10-07 19:12:57 +01:00
pxafb.h
regs-lcd.h
regs-ssp.h
reset.h	[ARM] 5300/1: fixup spitz reset during boot	2008-10-11 09:52:38 +01:00
sharpsl.h	[ARM] corgi_lcd: fix simultaneous compilation with corgi_bl	2008-10-29 11:45:37 +08:00
spitz.h	[ARM] pxa/spitz: fix unbalance parenthesis in header file spitz.h	2008-10-21 22:45:57 +08:00
ssp.h	[ARM] 5224/2: PXA SSP: Introduce register accessors	2008-09-09 16:32:52 +01:00
system.h
timex.h
tosa_bt.h
tosa.h	backlight: add support for Sharp SL-6000 LCD and backlight drivers	2008-10-21 00:19:49 +01:00
trizeps4.h	[ARM] 5204/1: Trizeps4 SOM update	2008-10-01 22:33:11 +01:00
udc.h
uncompress.h
viper.h	Basic support for the Arcom/Eurotech Viper SBC.	2008-09-09 17:41:46 +02:00
vmalloc.h
zylonite.h	misc: replace remaining __FUNCTION__ with __func__	2008-10-20 16:17:42 -07:00