7cd658cd2b
The tail register read became redundant as the result of earlier receive interrupt bug fixes. Drop another unneeded register read. And another line that got duplicated. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
1604 lines
51 KiB
C
1604 lines
51 KiB
C
/*
|
|
* Copyright (c) 2006 QLogic, Inc. All rights reserved.
|
|
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
|
|
*
|
|
* This software is available to you under a choice of one of two
|
|
* licenses. You may choose to be licensed under the terms of the GNU
|
|
* General Public License (GPL) Version 2, available from the file
|
|
* COPYING in the main directory of this source tree, or the
|
|
* OpenIB.org BSD license below:
|
|
*
|
|
* Redistribution and use in source and binary forms, with or
|
|
* without modification, are permitted provided that the following
|
|
* conditions are met:
|
|
*
|
|
* - Redistributions of source code must retain the above
|
|
* copyright notice, this list of conditions and the following
|
|
* disclaimer.
|
|
*
|
|
* - Redistributions in binary form must reproduce the above
|
|
* copyright notice, this list of conditions and the following
|
|
* disclaimer in the documentation and/or other materials
|
|
* provided with the distribution.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
|
|
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
|
|
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
|
|
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
|
|
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
|
|
* SOFTWARE.
|
|
*/
|
|
|
|
/*
|
|
* This file contains all of the code that is specific to the InfiniPath
|
|
* HT-400 chip.
|
|
*/
|
|
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include "ipath_kernel.h"
|
|
#include "ipath_registers.h"
|
|
|
|
/*
|
|
* This lists the InfiniPath HT400 registers, in the actual chip layout.
|
|
* This structure should never be directly accessed.
|
|
*
|
|
* The names are in InterCap form because they're taken straight from
|
|
* the chip specification. Since they're only used in this file, they
|
|
* don't pollute the rest of the source.
|
|
*/
|
|
|
|
struct _infinipath_do_not_use_kernel_regs {
|
|
unsigned long long Revision;
|
|
unsigned long long Control;
|
|
unsigned long long PageAlign;
|
|
unsigned long long PortCnt;
|
|
unsigned long long DebugPortSelect;
|
|
unsigned long long DebugPort;
|
|
unsigned long long SendRegBase;
|
|
unsigned long long UserRegBase;
|
|
unsigned long long CounterRegBase;
|
|
unsigned long long Scratch;
|
|
unsigned long long ReservedMisc1;
|
|
unsigned long long InterruptConfig;
|
|
unsigned long long IntBlocked;
|
|
unsigned long long IntMask;
|
|
unsigned long long IntStatus;
|
|
unsigned long long IntClear;
|
|
unsigned long long ErrorMask;
|
|
unsigned long long ErrorStatus;
|
|
unsigned long long ErrorClear;
|
|
unsigned long long HwErrMask;
|
|
unsigned long long HwErrStatus;
|
|
unsigned long long HwErrClear;
|
|
unsigned long long HwDiagCtrl;
|
|
unsigned long long MDIO;
|
|
unsigned long long IBCStatus;
|
|
unsigned long long IBCCtrl;
|
|
unsigned long long ExtStatus;
|
|
unsigned long long ExtCtrl;
|
|
unsigned long long GPIOOut;
|
|
unsigned long long GPIOMask;
|
|
unsigned long long GPIOStatus;
|
|
unsigned long long GPIOClear;
|
|
unsigned long long RcvCtrl;
|
|
unsigned long long RcvBTHQP;
|
|
unsigned long long RcvHdrSize;
|
|
unsigned long long RcvHdrCnt;
|
|
unsigned long long RcvHdrEntSize;
|
|
unsigned long long RcvTIDBase;
|
|
unsigned long long RcvTIDCnt;
|
|
unsigned long long RcvEgrBase;
|
|
unsigned long long RcvEgrCnt;
|
|
unsigned long long RcvBufBase;
|
|
unsigned long long RcvBufSize;
|
|
unsigned long long RxIntMemBase;
|
|
unsigned long long RxIntMemSize;
|
|
unsigned long long RcvPartitionKey;
|
|
unsigned long long ReservedRcv[10];
|
|
unsigned long long SendCtrl;
|
|
unsigned long long SendPIOBufBase;
|
|
unsigned long long SendPIOSize;
|
|
unsigned long long SendPIOBufCnt;
|
|
unsigned long long SendPIOAvailAddr;
|
|
unsigned long long TxIntMemBase;
|
|
unsigned long long TxIntMemSize;
|
|
unsigned long long ReservedSend[9];
|
|
unsigned long long SendBufferError;
|
|
unsigned long long SendBufferErrorCONT1;
|
|
unsigned long long SendBufferErrorCONT2;
|
|
unsigned long long SendBufferErrorCONT3;
|
|
unsigned long long ReservedSBE[4];
|
|
unsigned long long RcvHdrAddr0;
|
|
unsigned long long RcvHdrAddr1;
|
|
unsigned long long RcvHdrAddr2;
|
|
unsigned long long RcvHdrAddr3;
|
|
unsigned long long RcvHdrAddr4;
|
|
unsigned long long RcvHdrAddr5;
|
|
unsigned long long RcvHdrAddr6;
|
|
unsigned long long RcvHdrAddr7;
|
|
unsigned long long RcvHdrAddr8;
|
|
unsigned long long ReservedRHA[7];
|
|
unsigned long long RcvHdrTailAddr0;
|
|
unsigned long long RcvHdrTailAddr1;
|
|
unsigned long long RcvHdrTailAddr2;
|
|
unsigned long long RcvHdrTailAddr3;
|
|
unsigned long long RcvHdrTailAddr4;
|
|
unsigned long long RcvHdrTailAddr5;
|
|
unsigned long long RcvHdrTailAddr6;
|
|
unsigned long long RcvHdrTailAddr7;
|
|
unsigned long long RcvHdrTailAddr8;
|
|
unsigned long long ReservedRHTA[7];
|
|
unsigned long long Sync; /* Software only */
|
|
unsigned long long Dump; /* Software only */
|
|
unsigned long long SimVer; /* Software only */
|
|
unsigned long long ReservedSW[5];
|
|
unsigned long long SerdesConfig0;
|
|
unsigned long long SerdesConfig1;
|
|
unsigned long long SerdesStatus;
|
|
unsigned long long XGXSConfig;
|
|
unsigned long long ReservedSW2[4];
|
|
};
|
|
|
|
#define IPATH_KREG_OFFSET(field) (offsetof(struct \
|
|
_infinipath_do_not_use_kernel_regs, field) / sizeof(u64))
|
|
#define IPATH_CREG_OFFSET(field) (offsetof( \
|
|
struct infinipath_counters, field) / sizeof(u64))
|
|
|
|
static const struct ipath_kregs ipath_ht_kregs = {
|
|
.kr_control = IPATH_KREG_OFFSET(Control),
|
|
.kr_counterregbase = IPATH_KREG_OFFSET(CounterRegBase),
|
|
.kr_debugport = IPATH_KREG_OFFSET(DebugPort),
|
|
.kr_debugportselect = IPATH_KREG_OFFSET(DebugPortSelect),
|
|
.kr_errorclear = IPATH_KREG_OFFSET(ErrorClear),
|
|
.kr_errormask = IPATH_KREG_OFFSET(ErrorMask),
|
|
.kr_errorstatus = IPATH_KREG_OFFSET(ErrorStatus),
|
|
.kr_extctrl = IPATH_KREG_OFFSET(ExtCtrl),
|
|
.kr_extstatus = IPATH_KREG_OFFSET(ExtStatus),
|
|
.kr_gpio_clear = IPATH_KREG_OFFSET(GPIOClear),
|
|
.kr_gpio_mask = IPATH_KREG_OFFSET(GPIOMask),
|
|
.kr_gpio_out = IPATH_KREG_OFFSET(GPIOOut),
|
|
.kr_gpio_status = IPATH_KREG_OFFSET(GPIOStatus),
|
|
.kr_hwdiagctrl = IPATH_KREG_OFFSET(HwDiagCtrl),
|
|
.kr_hwerrclear = IPATH_KREG_OFFSET(HwErrClear),
|
|
.kr_hwerrmask = IPATH_KREG_OFFSET(HwErrMask),
|
|
.kr_hwerrstatus = IPATH_KREG_OFFSET(HwErrStatus),
|
|
.kr_ibcctrl = IPATH_KREG_OFFSET(IBCCtrl),
|
|
.kr_ibcstatus = IPATH_KREG_OFFSET(IBCStatus),
|
|
.kr_intblocked = IPATH_KREG_OFFSET(IntBlocked),
|
|
.kr_intclear = IPATH_KREG_OFFSET(IntClear),
|
|
.kr_interruptconfig = IPATH_KREG_OFFSET(InterruptConfig),
|
|
.kr_intmask = IPATH_KREG_OFFSET(IntMask),
|
|
.kr_intstatus = IPATH_KREG_OFFSET(IntStatus),
|
|
.kr_mdio = IPATH_KREG_OFFSET(MDIO),
|
|
.kr_pagealign = IPATH_KREG_OFFSET(PageAlign),
|
|
.kr_partitionkey = IPATH_KREG_OFFSET(RcvPartitionKey),
|
|
.kr_portcnt = IPATH_KREG_OFFSET(PortCnt),
|
|
.kr_rcvbthqp = IPATH_KREG_OFFSET(RcvBTHQP),
|
|
.kr_rcvbufbase = IPATH_KREG_OFFSET(RcvBufBase),
|
|
.kr_rcvbufsize = IPATH_KREG_OFFSET(RcvBufSize),
|
|
.kr_rcvctrl = IPATH_KREG_OFFSET(RcvCtrl),
|
|
.kr_rcvegrbase = IPATH_KREG_OFFSET(RcvEgrBase),
|
|
.kr_rcvegrcnt = IPATH_KREG_OFFSET(RcvEgrCnt),
|
|
.kr_rcvhdrcnt = IPATH_KREG_OFFSET(RcvHdrCnt),
|
|
.kr_rcvhdrentsize = IPATH_KREG_OFFSET(RcvHdrEntSize),
|
|
.kr_rcvhdrsize = IPATH_KREG_OFFSET(RcvHdrSize),
|
|
.kr_rcvintmembase = IPATH_KREG_OFFSET(RxIntMemBase),
|
|
.kr_rcvintmemsize = IPATH_KREG_OFFSET(RxIntMemSize),
|
|
.kr_rcvtidbase = IPATH_KREG_OFFSET(RcvTIDBase),
|
|
.kr_rcvtidcnt = IPATH_KREG_OFFSET(RcvTIDCnt),
|
|
.kr_revision = IPATH_KREG_OFFSET(Revision),
|
|
.kr_scratch = IPATH_KREG_OFFSET(Scratch),
|
|
.kr_sendbuffererror = IPATH_KREG_OFFSET(SendBufferError),
|
|
.kr_sendctrl = IPATH_KREG_OFFSET(SendCtrl),
|
|
.kr_sendpioavailaddr = IPATH_KREG_OFFSET(SendPIOAvailAddr),
|
|
.kr_sendpiobufbase = IPATH_KREG_OFFSET(SendPIOBufBase),
|
|
.kr_sendpiobufcnt = IPATH_KREG_OFFSET(SendPIOBufCnt),
|
|
.kr_sendpiosize = IPATH_KREG_OFFSET(SendPIOSize),
|
|
.kr_sendregbase = IPATH_KREG_OFFSET(SendRegBase),
|
|
.kr_txintmembase = IPATH_KREG_OFFSET(TxIntMemBase),
|
|
.kr_txintmemsize = IPATH_KREG_OFFSET(TxIntMemSize),
|
|
.kr_userregbase = IPATH_KREG_OFFSET(UserRegBase),
|
|
.kr_serdesconfig0 = IPATH_KREG_OFFSET(SerdesConfig0),
|
|
.kr_serdesconfig1 = IPATH_KREG_OFFSET(SerdesConfig1),
|
|
.kr_serdesstatus = IPATH_KREG_OFFSET(SerdesStatus),
|
|
.kr_xgxsconfig = IPATH_KREG_OFFSET(XGXSConfig),
|
|
/*
|
|
* These should not be used directly via ipath_read_kreg64(),
|
|
* use them with ipath_read_kreg64_port(),
|
|
*/
|
|
.kr_rcvhdraddr = IPATH_KREG_OFFSET(RcvHdrAddr0),
|
|
.kr_rcvhdrtailaddr = IPATH_KREG_OFFSET(RcvHdrTailAddr0)
|
|
};
|
|
|
|
static const struct ipath_cregs ipath_ht_cregs = {
|
|
.cr_badformatcnt = IPATH_CREG_OFFSET(RxBadFormatCnt),
|
|
.cr_erricrccnt = IPATH_CREG_OFFSET(RxICRCErrCnt),
|
|
.cr_errlinkcnt = IPATH_CREG_OFFSET(RxLinkProblemCnt),
|
|
.cr_errlpcrccnt = IPATH_CREG_OFFSET(RxLPCRCErrCnt),
|
|
.cr_errpkey = IPATH_CREG_OFFSET(RxPKeyMismatchCnt),
|
|
.cr_errrcvflowctrlcnt = IPATH_CREG_OFFSET(RxFlowCtrlErrCnt),
|
|
.cr_err_rlencnt = IPATH_CREG_OFFSET(RxLenErrCnt),
|
|
.cr_errslencnt = IPATH_CREG_OFFSET(TxLenErrCnt),
|
|
.cr_errtidfull = IPATH_CREG_OFFSET(RxTIDFullErrCnt),
|
|
.cr_errtidvalid = IPATH_CREG_OFFSET(RxTIDValidErrCnt),
|
|
.cr_errvcrccnt = IPATH_CREG_OFFSET(RxVCRCErrCnt),
|
|
.cr_ibstatuschange = IPATH_CREG_OFFSET(IBStatusChangeCnt),
|
|
/* calc from Reg_CounterRegBase + offset */
|
|
.cr_intcnt = IPATH_CREG_OFFSET(LBIntCnt),
|
|
.cr_invalidrlencnt = IPATH_CREG_OFFSET(RxMaxMinLenErrCnt),
|
|
.cr_invalidslencnt = IPATH_CREG_OFFSET(TxMaxMinLenErrCnt),
|
|
.cr_lbflowstallcnt = IPATH_CREG_OFFSET(LBFlowStallCnt),
|
|
.cr_pktrcvcnt = IPATH_CREG_OFFSET(RxDataPktCnt),
|
|
.cr_pktrcvflowctrlcnt = IPATH_CREG_OFFSET(RxFlowPktCnt),
|
|
.cr_pktsendcnt = IPATH_CREG_OFFSET(TxDataPktCnt),
|
|
.cr_pktsendflowcnt = IPATH_CREG_OFFSET(TxFlowPktCnt),
|
|
.cr_portovflcnt = IPATH_CREG_OFFSET(RxP0HdrEgrOvflCnt),
|
|
.cr_rcvebpcnt = IPATH_CREG_OFFSET(RxEBPCnt),
|
|
.cr_rcvovflcnt = IPATH_CREG_OFFSET(RxBufOvflCnt),
|
|
.cr_senddropped = IPATH_CREG_OFFSET(TxDroppedPktCnt),
|
|
.cr_sendstallcnt = IPATH_CREG_OFFSET(TxFlowStallCnt),
|
|
.cr_sendunderruncnt = IPATH_CREG_OFFSET(TxUnderrunCnt),
|
|
.cr_wordrcvcnt = IPATH_CREG_OFFSET(RxDwordCnt),
|
|
.cr_wordsendcnt = IPATH_CREG_OFFSET(TxDwordCnt),
|
|
.cr_unsupvlcnt = IPATH_CREG_OFFSET(TxUnsupVLErrCnt),
|
|
.cr_rxdroppktcnt = IPATH_CREG_OFFSET(RxDroppedPktCnt),
|
|
.cr_iblinkerrrecovcnt = IPATH_CREG_OFFSET(IBLinkErrRecoveryCnt),
|
|
.cr_iblinkdowncnt = IPATH_CREG_OFFSET(IBLinkDownedCnt),
|
|
.cr_ibsymbolerrcnt = IPATH_CREG_OFFSET(IBSymbolErrCnt)
|
|
};
|
|
|
|
/* kr_intstatus, kr_intclear, kr_intmask bits */
|
|
#define INFINIPATH_I_RCVURG_MASK 0x1FF
|
|
#define INFINIPATH_I_RCVAVAIL_MASK 0x1FF
|
|
|
|
/* kr_hwerrclear, kr_hwerrmask, kr_hwerrstatus, bits */
|
|
#define INFINIPATH_HWE_HTCMEMPARITYERR_SHIFT 0
|
|
#define INFINIPATH_HWE_HTCMEMPARITYERR_MASK 0x3FFFFFULL
|
|
#define INFINIPATH_HWE_HTCLNKABYTE0CRCERR 0x0000000000800000ULL
|
|
#define INFINIPATH_HWE_HTCLNKABYTE1CRCERR 0x0000000001000000ULL
|
|
#define INFINIPATH_HWE_HTCLNKBBYTE0CRCERR 0x0000000002000000ULL
|
|
#define INFINIPATH_HWE_HTCLNKBBYTE1CRCERR 0x0000000004000000ULL
|
|
#define INFINIPATH_HWE_HTCMISCERR4 0x0000000008000000ULL
|
|
#define INFINIPATH_HWE_HTCMISCERR5 0x0000000010000000ULL
|
|
#define INFINIPATH_HWE_HTCMISCERR6 0x0000000020000000ULL
|
|
#define INFINIPATH_HWE_HTCMISCERR7 0x0000000040000000ULL
|
|
#define INFINIPATH_HWE_HTCBUSTREQPARITYERR 0x0000000080000000ULL
|
|
#define INFINIPATH_HWE_HTCBUSTRESPPARITYERR 0x0000000100000000ULL
|
|
#define INFINIPATH_HWE_HTCBUSIREQPARITYERR 0x0000000200000000ULL
|
|
#define INFINIPATH_HWE_COREPLL_FBSLIP 0x0080000000000000ULL
|
|
#define INFINIPATH_HWE_COREPLL_RFSLIP 0x0100000000000000ULL
|
|
#define INFINIPATH_HWE_HTBPLL_FBSLIP 0x0200000000000000ULL
|
|
#define INFINIPATH_HWE_HTBPLL_RFSLIP 0x0400000000000000ULL
|
|
#define INFINIPATH_HWE_HTAPLL_FBSLIP 0x0800000000000000ULL
|
|
#define INFINIPATH_HWE_HTAPLL_RFSLIP 0x1000000000000000ULL
|
|
#define INFINIPATH_HWE_SERDESPLLFAILED 0x2000000000000000ULL
|
|
|
|
/* kr_extstatus bits */
|
|
#define INFINIPATH_EXTS_FREQSEL 0x2
|
|
#define INFINIPATH_EXTS_SERDESSEL 0x4
|
|
#define INFINIPATH_EXTS_MEMBIST_ENDTEST 0x0000000000004000
|
|
#define INFINIPATH_EXTS_MEMBIST_CORRECT 0x0000000000008000
|
|
|
|
/*
|
|
* masks and bits that are different in different chips, or present only
|
|
* in one
|
|
*/
|
|
static const ipath_err_t infinipath_hwe_htcmemparityerr_mask =
|
|
INFINIPATH_HWE_HTCMEMPARITYERR_MASK;
|
|
static const ipath_err_t infinipath_hwe_htcmemparityerr_shift =
|
|
INFINIPATH_HWE_HTCMEMPARITYERR_SHIFT;
|
|
|
|
static const ipath_err_t infinipath_hwe_htclnkabyte0crcerr =
|
|
INFINIPATH_HWE_HTCLNKABYTE0CRCERR;
|
|
static const ipath_err_t infinipath_hwe_htclnkabyte1crcerr =
|
|
INFINIPATH_HWE_HTCLNKABYTE1CRCERR;
|
|
static const ipath_err_t infinipath_hwe_htclnkbbyte0crcerr =
|
|
INFINIPATH_HWE_HTCLNKBBYTE0CRCERR;
|
|
static const ipath_err_t infinipath_hwe_htclnkbbyte1crcerr =
|
|
INFINIPATH_HWE_HTCLNKBBYTE1CRCERR;
|
|
|
|
#define _IPATH_GPIO_SDA_NUM 1
|
|
#define _IPATH_GPIO_SCL_NUM 0
|
|
|
|
#define IPATH_GPIO_SDA \
|
|
(1ULL << (_IPATH_GPIO_SDA_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT))
|
|
#define IPATH_GPIO_SCL \
|
|
(1ULL << (_IPATH_GPIO_SCL_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT))
|
|
|
|
/* keep the code below somewhat more readonable; not used elsewhere */
|
|
#define _IPATH_HTLINK0_CRCBITS (infinipath_hwe_htclnkabyte0crcerr | \
|
|
infinipath_hwe_htclnkabyte1crcerr)
|
|
#define _IPATH_HTLINK1_CRCBITS (infinipath_hwe_htclnkbbyte0crcerr | \
|
|
infinipath_hwe_htclnkbbyte1crcerr)
|
|
#define _IPATH_HTLANE0_CRCBITS (infinipath_hwe_htclnkabyte0crcerr | \
|
|
infinipath_hwe_htclnkbbyte0crcerr)
|
|
#define _IPATH_HTLANE1_CRCBITS (infinipath_hwe_htclnkabyte1crcerr | \
|
|
infinipath_hwe_htclnkbbyte1crcerr)
|
|
|
|
static void hwerr_crcbits(struct ipath_devdata *dd, ipath_err_t hwerrs,
|
|
char *msg, size_t msgl)
|
|
{
|
|
char bitsmsg[64];
|
|
ipath_err_t crcbits = hwerrs &
|
|
(_IPATH_HTLINK0_CRCBITS | _IPATH_HTLINK1_CRCBITS);
|
|
/* don't check if 8bit HT */
|
|
if (dd->ipath_flags & IPATH_8BIT_IN_HT0)
|
|
crcbits &= ~infinipath_hwe_htclnkabyte1crcerr;
|
|
/* don't check if 8bit HT */
|
|
if (dd->ipath_flags & IPATH_8BIT_IN_HT1)
|
|
crcbits &= ~infinipath_hwe_htclnkbbyte1crcerr;
|
|
/*
|
|
* we'll want to ignore link errors on link that is
|
|
* not in use, if any. For now, complain about both
|
|
*/
|
|
if (crcbits) {
|
|
u16 ctrl0, ctrl1;
|
|
snprintf(bitsmsg, sizeof bitsmsg,
|
|
"[HT%s lane %s CRC (%llx); ignore till reload]",
|
|
!(crcbits & _IPATH_HTLINK1_CRCBITS) ?
|
|
"0 (A)" : (!(crcbits & _IPATH_HTLINK0_CRCBITS)
|
|
? "1 (B)" : "0+1 (A+B)"),
|
|
!(crcbits & _IPATH_HTLANE1_CRCBITS) ? "0"
|
|
: (!(crcbits & _IPATH_HTLANE0_CRCBITS) ? "1" :
|
|
"0+1"), (unsigned long long) crcbits);
|
|
strlcat(msg, bitsmsg, msgl);
|
|
|
|
/*
|
|
* print extra info for debugging. slave/primary
|
|
* config word 4, 8 (link control 0, 1)
|
|
*/
|
|
|
|
if (pci_read_config_word(dd->pcidev,
|
|
dd->ipath_ht_slave_off + 0x4,
|
|
&ctrl0))
|
|
dev_info(&dd->pcidev->dev, "Couldn't read "
|
|
"linkctrl0 of slave/primary "
|
|
"config block\n");
|
|
else if (!(ctrl0 & 1 << 6))
|
|
/* not if EOC bit set */
|
|
ipath_dbg("HT linkctrl0 0x%x%s%s\n", ctrl0,
|
|
((ctrl0 >> 8) & 7) ? " CRC" : "",
|
|
((ctrl0 >> 4) & 1) ? "linkfail" :
|
|
"");
|
|
if (pci_read_config_word(dd->pcidev,
|
|
dd->ipath_ht_slave_off + 0x8,
|
|
&ctrl1))
|
|
dev_info(&dd->pcidev->dev, "Couldn't read "
|
|
"linkctrl1 of slave/primary "
|
|
"config block\n");
|
|
else if (!(ctrl1 & 1 << 6))
|
|
/* not if EOC bit set */
|
|
ipath_dbg("HT linkctrl1 0x%x%s%s\n", ctrl1,
|
|
((ctrl1 >> 8) & 7) ? " CRC" : "",
|
|
((ctrl1 >> 4) & 1) ? "linkfail" :
|
|
"");
|
|
|
|
/* disable until driver reloaded */
|
|
dd->ipath_hwerrmask &= ~crcbits;
|
|
ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
|
|
dd->ipath_hwerrmask);
|
|
ipath_dbg("HT crc errs: %s\n", msg);
|
|
} else
|
|
ipath_dbg("ignoring HT crc errors 0x%llx, "
|
|
"not in use\n", (unsigned long long)
|
|
(hwerrs & (_IPATH_HTLINK0_CRCBITS |
|
|
_IPATH_HTLINK1_CRCBITS)));
|
|
}
|
|
|
|
/**
|
|
* ipath_ht_handle_hwerrors - display hardware errors
|
|
* @dd: the infinipath device
|
|
* @msg: the output buffer
|
|
* @msgl: the size of the output buffer
|
|
*
|
|
* Use same msg buffer as regular errors to avoid
|
|
* excessive stack use. Most hardware errors are catastrophic, but for
|
|
* right now, we'll print them and continue.
|
|
* We reuse the same message buffer as ipath_handle_errors() to avoid
|
|
* excessive stack usage.
|
|
*/
|
|
static void ipath_ht_handle_hwerrors(struct ipath_devdata *dd, char *msg,
|
|
size_t msgl)
|
|
{
|
|
ipath_err_t hwerrs;
|
|
u32 bits, ctrl;
|
|
int isfatal = 0;
|
|
char bitsmsg[64];
|
|
|
|
hwerrs = ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwerrstatus);
|
|
|
|
if (!hwerrs) {
|
|
ipath_cdbg(VERBOSE, "Called but no hardware errors set\n");
|
|
/*
|
|
* better than printing cofusing messages
|
|
* This seems to be related to clearing the crc error, or
|
|
* the pll error during init.
|
|
*/
|
|
goto bail;
|
|
} else if (hwerrs == -1LL) {
|
|
ipath_dev_err(dd, "Read of hardware error status failed "
|
|
"(all bits set); ignoring\n");
|
|
goto bail;
|
|
}
|
|
ipath_stats.sps_hwerrs++;
|
|
|
|
/* Always clear the error status register, except MEMBISTFAIL,
|
|
* regardless of whether we continue or stop using the chip.
|
|
* We want that set so we know it failed, even across driver reload.
|
|
* We'll still ignore it in the hwerrmask. We do this partly for
|
|
* diagnostics, but also for support */
|
|
ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
|
|
hwerrs&~INFINIPATH_HWE_MEMBISTFAILED);
|
|
|
|
hwerrs &= dd->ipath_hwerrmask;
|
|
|
|
/*
|
|
* make sure we get this much out, unless told to be quiet,
|
|
* or it's occurred within the last 5 seconds
|
|
*/
|
|
if ((hwerrs & ~dd->ipath_lasthwerror) ||
|
|
(ipath_debug & __IPATH_VERBDBG))
|
|
dev_info(&dd->pcidev->dev, "Hardware error: hwerr=0x%llx "
|
|
"(cleared)\n", (unsigned long long) hwerrs);
|
|
dd->ipath_lasthwerror |= hwerrs;
|
|
|
|
if (hwerrs & ~infinipath_hwe_bitsextant)
|
|
ipath_dev_err(dd, "hwerror interrupt with unknown errors "
|
|
"%llx set\n", (unsigned long long)
|
|
(hwerrs & ~infinipath_hwe_bitsextant));
|
|
|
|
ctrl = ipath_read_kreg32(dd, dd->ipath_kregs->kr_control);
|
|
if (ctrl & INFINIPATH_C_FREEZEMODE) {
|
|
if (hwerrs) {
|
|
/*
|
|
* if any set that we aren't ignoring; only
|
|
* make the complaint once, in case it's stuck
|
|
* or recurring, and we get here multiple
|
|
* times.
|
|
*/
|
|
if (dd->ipath_flags & IPATH_INITTED) {
|
|
ipath_dev_err(dd, "Fatal Error (freeze "
|
|
"mode), no longer usable\n");
|
|
isfatal = 1;
|
|
}
|
|
*dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
|
|
/* mark as having had error */
|
|
*dd->ipath_statusp |= IPATH_STATUS_HWERROR;
|
|
/*
|
|
* mark as not usable, at a minimum until driver
|
|
* is reloaded, probably until reboot, since no
|
|
* other reset is possible.
|
|
*/
|
|
dd->ipath_flags &= ~IPATH_INITTED;
|
|
} else {
|
|
ipath_dbg("Clearing freezemode on ignored hardware "
|
|
"error\n");
|
|
ctrl &= ~INFINIPATH_C_FREEZEMODE;
|
|
ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
|
|
ctrl);
|
|
}
|
|
}
|
|
|
|
*msg = '\0';
|
|
|
|
/*
|
|
* may someday want to decode into which bits are which
|
|
* functional area for parity errors, etc.
|
|
*/
|
|
if (hwerrs & (infinipath_hwe_htcmemparityerr_mask
|
|
<< INFINIPATH_HWE_HTCMEMPARITYERR_SHIFT)) {
|
|
bits = (u32) ((hwerrs >>
|
|
INFINIPATH_HWE_HTCMEMPARITYERR_SHIFT) &
|
|
INFINIPATH_HWE_HTCMEMPARITYERR_MASK);
|
|
snprintf(bitsmsg, sizeof bitsmsg, "[HTC Parity Errs %x] ",
|
|
bits);
|
|
strlcat(msg, bitsmsg, msgl);
|
|
}
|
|
if (hwerrs & (INFINIPATH_HWE_RXEMEMPARITYERR_MASK
|
|
<< INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT)) {
|
|
bits = (u32) ((hwerrs >>
|
|
INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT) &
|
|
INFINIPATH_HWE_RXEMEMPARITYERR_MASK);
|
|
snprintf(bitsmsg, sizeof bitsmsg, "[RXE Parity Errs %x] ",
|
|
bits);
|
|
strlcat(msg, bitsmsg, msgl);
|
|
}
|
|
if (hwerrs & (INFINIPATH_HWE_TXEMEMPARITYERR_MASK
|
|
<< INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT)) {
|
|
bits = (u32) ((hwerrs >>
|
|
INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT) &
|
|
INFINIPATH_HWE_TXEMEMPARITYERR_MASK);
|
|
snprintf(bitsmsg, sizeof bitsmsg, "[TXE Parity Errs %x] ",
|
|
bits);
|
|
strlcat(msg, bitsmsg, msgl);
|
|
}
|
|
if (hwerrs & INFINIPATH_HWE_IBCBUSTOSPCPARITYERR)
|
|
strlcat(msg, "[IB2IPATH Parity]", msgl);
|
|
if (hwerrs & INFINIPATH_HWE_IBCBUSFRSPCPARITYERR)
|
|
strlcat(msg, "[IPATH2IB Parity]", msgl);
|
|
if (hwerrs & INFINIPATH_HWE_HTCBUSIREQPARITYERR)
|
|
strlcat(msg, "[HTC Ireq Parity]", msgl);
|
|
if (hwerrs & INFINIPATH_HWE_HTCBUSTREQPARITYERR)
|
|
strlcat(msg, "[HTC Treq Parity]", msgl);
|
|
if (hwerrs & INFINIPATH_HWE_HTCBUSTRESPPARITYERR)
|
|
strlcat(msg, "[HTC Tresp Parity]", msgl);
|
|
|
|
if (hwerrs & (_IPATH_HTLINK0_CRCBITS | _IPATH_HTLINK1_CRCBITS))
|
|
hwerr_crcbits(dd, hwerrs, msg, msgl);
|
|
|
|
if (hwerrs & INFINIPATH_HWE_HTCMISCERR5)
|
|
strlcat(msg, "[HT core Misc5]", msgl);
|
|
if (hwerrs & INFINIPATH_HWE_HTCMISCERR6)
|
|
strlcat(msg, "[HT core Misc6]", msgl);
|
|
if (hwerrs & INFINIPATH_HWE_HTCMISCERR7)
|
|
strlcat(msg, "[HT core Misc7]", msgl);
|
|
if (hwerrs & INFINIPATH_HWE_MEMBISTFAILED) {
|
|
strlcat(msg, "[Memory BIST test failed, HT-400 unusable]",
|
|
msgl);
|
|
/* ignore from now on, so disable until driver reloaded */
|
|
dd->ipath_hwerrmask &= ~INFINIPATH_HWE_MEMBISTFAILED;
|
|
ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
|
|
dd->ipath_hwerrmask);
|
|
}
|
|
#define _IPATH_PLL_FAIL (INFINIPATH_HWE_COREPLL_FBSLIP | \
|
|
INFINIPATH_HWE_COREPLL_RFSLIP | \
|
|
INFINIPATH_HWE_HTBPLL_FBSLIP | \
|
|
INFINIPATH_HWE_HTBPLL_RFSLIP | \
|
|
INFINIPATH_HWE_HTAPLL_FBSLIP | \
|
|
INFINIPATH_HWE_HTAPLL_RFSLIP)
|
|
|
|
if (hwerrs & _IPATH_PLL_FAIL) {
|
|
snprintf(bitsmsg, sizeof bitsmsg,
|
|
"[PLL failed (%llx), HT-400 unusable]",
|
|
(unsigned long long) (hwerrs & _IPATH_PLL_FAIL));
|
|
strlcat(msg, bitsmsg, msgl);
|
|
/* ignore from now on, so disable until driver reloaded */
|
|
dd->ipath_hwerrmask &= ~(hwerrs & _IPATH_PLL_FAIL);
|
|
ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
|
|
dd->ipath_hwerrmask);
|
|
}
|
|
|
|
if (hwerrs & INFINIPATH_HWE_SERDESPLLFAILED) {
|
|
/*
|
|
* If it occurs, it is left masked since the eternal
|
|
* interface is unused
|
|
*/
|
|
dd->ipath_hwerrmask &= ~INFINIPATH_HWE_SERDESPLLFAILED;
|
|
ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
|
|
dd->ipath_hwerrmask);
|
|
}
|
|
|
|
if (hwerrs & INFINIPATH_HWE_RXDSYNCMEMPARITYERR)
|
|
strlcat(msg, "[Rx Dsync]", msgl);
|
|
if (hwerrs & INFINIPATH_HWE_SERDESPLLFAILED)
|
|
strlcat(msg, "[SerDes PLL]", msgl);
|
|
|
|
ipath_dev_err(dd, "%s hardware error\n", msg);
|
|
if (isfatal && !ipath_diag_inuse && dd->ipath_freezemsg)
|
|
/*
|
|
* for status file; if no trailing brace is copied,
|
|
* we'll know it was truncated.
|
|
*/
|
|
snprintf(dd->ipath_freezemsg,
|
|
dd->ipath_freezelen, "{%s}", msg);
|
|
|
|
bail:;
|
|
}
|
|
|
|
/**
|
|
* ipath_ht_boardname - fill in the board name
|
|
* @dd: the infinipath device
|
|
* @name: the output buffer
|
|
* @namelen: the size of the output buffer
|
|
*
|
|
* fill in the board name, based on the board revision register
|
|
*/
|
|
static int ipath_ht_boardname(struct ipath_devdata *dd, char *name,
|
|
size_t namelen)
|
|
{
|
|
char *n = NULL;
|
|
u8 boardrev = dd->ipath_boardrev;
|
|
int ret;
|
|
|
|
switch (boardrev) {
|
|
case 4: /* Ponderosa is one of the bringup boards */
|
|
n = "Ponderosa";
|
|
break;
|
|
case 5:
|
|
/*
|
|
* HT-460 original production board; two production levels, with
|
|
* different serial number ranges. See ipath_ht_early_init() for
|
|
* case where we enable IPATH_GPIO_INTR for later serial # range.
|
|
*/
|
|
n = "InfiniPath_HT-460";
|
|
break;
|
|
case 6:
|
|
n = "OEM_Board_3";
|
|
break;
|
|
case 7:
|
|
/* HT-460 small form factor production board */
|
|
n = "InfiniPath_HT-465";
|
|
break;
|
|
case 8:
|
|
n = "LS/X-1";
|
|
break;
|
|
case 9: /* Comstock bringup test board */
|
|
n = "Comstock";
|
|
break;
|
|
case 10:
|
|
n = "OEM_Board_2";
|
|
break;
|
|
case 11:
|
|
n = "InfiniPath_HT-470";
|
|
break;
|
|
case 12:
|
|
n = "OEM_Board_4";
|
|
break;
|
|
default: /* don't know, just print the number */
|
|
ipath_dev_err(dd, "Don't yet know about board "
|
|
"with ID %u\n", boardrev);
|
|
snprintf(name, namelen, "Unknown_InfiniPath_HT-4xx_%u",
|
|
boardrev);
|
|
break;
|
|
}
|
|
if (n)
|
|
snprintf(name, namelen, "%s", n);
|
|
|
|
if (dd->ipath_majrev != 3 || (dd->ipath_minrev < 2 || dd->ipath_minrev > 3)) {
|
|
/*
|
|
* This version of the driver only supports the HT-400
|
|
* Rev 3.2
|
|
*/
|
|
ipath_dev_err(dd,
|
|
"Unsupported HT-400 revision %u.%u!\n",
|
|
dd->ipath_majrev, dd->ipath_minrev);
|
|
ret = 1;
|
|
goto bail;
|
|
}
|
|
/*
|
|
* pkt/word counters are 32 bit, and therefore wrap fast enough
|
|
* that we snapshot them from a timer, and maintain 64 bit shadow
|
|
* copies
|
|
*/
|
|
dd->ipath_flags |= IPATH_32BITCOUNTERS;
|
|
if (dd->ipath_htspeed != 800)
|
|
ipath_dev_err(dd,
|
|
"Incorrectly configured for HT @ %uMHz\n",
|
|
dd->ipath_htspeed);
|
|
if (dd->ipath_boardrev == 7 || dd->ipath_boardrev == 11 ||
|
|
dd->ipath_boardrev == 6)
|
|
dd->ipath_flags |= IPATH_GPIO_INTR;
|
|
else
|
|
dd->ipath_flags |= IPATH_POLL_RX_INTR;
|
|
if (dd->ipath_boardrev == 8) { /* LS/X-1 */
|
|
u64 val;
|
|
val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_extstatus);
|
|
if (val & INFINIPATH_EXTS_SERDESSEL) {
|
|
/*
|
|
* hardware disabled
|
|
*
|
|
* This means that the chip is hardware disabled,
|
|
* and will not be able to bring up the link,
|
|
* in any case. We special case this and abort
|
|
* early, to avoid later messages. We also set
|
|
* the DISABLED status bit
|
|
*/
|
|
ipath_dbg("Unit %u is hardware-disabled\n",
|
|
dd->ipath_unit);
|
|
*dd->ipath_statusp |= IPATH_STATUS_DISABLED;
|
|
/* this value is handled differently */
|
|
ret = 2;
|
|
goto bail;
|
|
}
|
|
}
|
|
ret = 0;
|
|
|
|
bail:
|
|
return ret;
|
|
}
|
|
|
|
static void ipath_check_htlink(struct ipath_devdata *dd)
|
|
{
|
|
u8 linkerr, link_off, i;
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
link_off = dd->ipath_ht_slave_off + i * 4 + 0xd;
|
|
if (pci_read_config_byte(dd->pcidev, link_off, &linkerr))
|
|
dev_info(&dd->pcidev->dev, "Couldn't read "
|
|
"linkerror%d of HT slave/primary block\n",
|
|
i);
|
|
else if (linkerr & 0xf0) {
|
|
ipath_cdbg(VERBOSE, "HT linkerr%d bits 0x%x set, "
|
|
"clearing\n", linkerr >> 4, i);
|
|
/*
|
|
* writing the linkerr bits that are set should
|
|
* clear them
|
|
*/
|
|
if (pci_write_config_byte(dd->pcidev, link_off,
|
|
linkerr))
|
|
ipath_dbg("Failed write to clear HT "
|
|
"linkerror%d\n", i);
|
|
if (pci_read_config_byte(dd->pcidev, link_off,
|
|
&linkerr))
|
|
dev_info(&dd->pcidev->dev,
|
|
"Couldn't reread linkerror%d of "
|
|
"HT slave/primary block\n", i);
|
|
else if (linkerr & 0xf0)
|
|
dev_info(&dd->pcidev->dev,
|
|
"HT linkerror%d bits 0x%x "
|
|
"couldn't be cleared\n",
|
|
i, linkerr >> 4);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int ipath_setup_ht_reset(struct ipath_devdata *dd)
|
|
{
|
|
ipath_dbg("No reset possible for HT-400\n");
|
|
return 0;
|
|
}
|
|
|
|
#define HT_CAPABILITY_ID 0x08 /* HT capabilities not defined in kernel */
|
|
#define HT_INTR_DISC_CONFIG 0x80 /* HT interrupt and discovery cap */
|
|
#define HT_INTR_REG_INDEX 2 /* intconfig requires indirect accesses */
|
|
|
|
/*
|
|
* Bits 13-15 of command==0 is slave/primary block. Clear any HT CRC
|
|
* errors. We only bother to do this at load time, because it's OK if
|
|
* it happened before we were loaded (first time after boot/reset),
|
|
* but any time after that, it's fatal anyway. Also need to not check
|
|
* for for upper byte errors if we are in 8 bit mode, so figure out
|
|
* our width. For now, at least, also complain if it's 8 bit.
|
|
*/
|
|
static void slave_or_pri_blk(struct ipath_devdata *dd, struct pci_dev *pdev,
|
|
int pos, u8 cap_type)
|
|
{
|
|
u8 linkwidth = 0, linkerr, link_a_b_off, link_off;
|
|
u16 linkctrl = 0;
|
|
int i;
|
|
|
|
dd->ipath_ht_slave_off = pos;
|
|
/* command word, master_host bit */
|
|
/* master host || slave */
|
|
if ((cap_type >> 2) & 1)
|
|
link_a_b_off = 4;
|
|
else
|
|
link_a_b_off = 0;
|
|
ipath_cdbg(VERBOSE, "HT%u (Link %c) connected to processor\n",
|
|
link_a_b_off ? 1 : 0,
|
|
link_a_b_off ? 'B' : 'A');
|
|
|
|
link_a_b_off += pos;
|
|
|
|
/*
|
|
* check both link control registers; clear both HT CRC sets if
|
|
* necessary.
|
|
*/
|
|
for (i = 0; i < 2; i++) {
|
|
link_off = pos + i * 4 + 0x4;
|
|
if (pci_read_config_word(pdev, link_off, &linkctrl))
|
|
ipath_dev_err(dd, "Couldn't read HT link control%d "
|
|
"register\n", i);
|
|
else if (linkctrl & (0xf << 8)) {
|
|
ipath_cdbg(VERBOSE, "Clear linkctrl%d CRC Error "
|
|
"bits %x\n", i, linkctrl & (0xf << 8));
|
|
/*
|
|
* now write them back to clear the error.
|
|
*/
|
|
pci_write_config_byte(pdev, link_off,
|
|
linkctrl & (0xf << 8));
|
|
}
|
|
}
|
|
|
|
/*
|
|
* As with HT CRC bits, same for protocol errors that might occur
|
|
* during boot.
|
|
*/
|
|
for (i = 0; i < 2; i++) {
|
|
link_off = pos + i * 4 + 0xd;
|
|
if (pci_read_config_byte(pdev, link_off, &linkerr))
|
|
dev_info(&pdev->dev, "Couldn't read linkerror%d "
|
|
"of HT slave/primary block\n", i);
|
|
else if (linkerr & 0xf0) {
|
|
ipath_cdbg(VERBOSE, "HT linkerr%d bits 0x%x set, "
|
|
"clearing\n", linkerr >> 4, i);
|
|
/*
|
|
* writing the linkerr bits that are set will clear
|
|
* them
|
|
*/
|
|
if (pci_write_config_byte
|
|
(pdev, link_off, linkerr))
|
|
ipath_dbg("Failed write to clear HT "
|
|
"linkerror%d\n", i);
|
|
if (pci_read_config_byte(pdev, link_off, &linkerr))
|
|
dev_info(&pdev->dev, "Couldn't reread "
|
|
"linkerror%d of HT slave/primary "
|
|
"block\n", i);
|
|
else if (linkerr & 0xf0)
|
|
dev_info(&pdev->dev, "HT linkerror%d bits "
|
|
"0x%x couldn't be cleared\n",
|
|
i, linkerr >> 4);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* this is just for our link to the host, not devices connected
|
|
* through tunnel.
|
|
*/
|
|
|
|
if (pci_read_config_byte(pdev, link_a_b_off + 7, &linkwidth))
|
|
ipath_dev_err(dd, "Couldn't read HT link width "
|
|
"config register\n");
|
|
else {
|
|
u32 width;
|
|
switch (linkwidth & 7) {
|
|
case 5:
|
|
width = 4;
|
|
break;
|
|
case 4:
|
|
width = 2;
|
|
break;
|
|
case 3:
|
|
width = 32;
|
|
break;
|
|
case 1:
|
|
width = 16;
|
|
break;
|
|
case 0:
|
|
default: /* if wrong, assume 8 bit */
|
|
width = 8;
|
|
break;
|
|
}
|
|
|
|
dd->ipath_htwidth = width;
|
|
|
|
if (linkwidth != 0x11) {
|
|
ipath_dev_err(dd, "Not configured for 16 bit HT "
|
|
"(%x)\n", linkwidth);
|
|
if (!(linkwidth & 0xf)) {
|
|
ipath_dbg("Will ignore HT lane1 errors\n");
|
|
dd->ipath_flags |= IPATH_8BIT_IN_HT0;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* this is just for our link to the host, not devices connected
|
|
* through tunnel.
|
|
*/
|
|
if (pci_read_config_byte(pdev, link_a_b_off + 0xd, &linkwidth))
|
|
ipath_dev_err(dd, "Couldn't read HT link frequency "
|
|
"config register\n");
|
|
else {
|
|
u32 speed;
|
|
switch (linkwidth & 0xf) {
|
|
case 6:
|
|
speed = 1000;
|
|
break;
|
|
case 5:
|
|
speed = 800;
|
|
break;
|
|
case 4:
|
|
speed = 600;
|
|
break;
|
|
case 3:
|
|
speed = 500;
|
|
break;
|
|
case 2:
|
|
speed = 400;
|
|
break;
|
|
case 1:
|
|
speed = 300;
|
|
break;
|
|
default:
|
|
/*
|
|
* assume reserved and vendor-specific are 200...
|
|
*/
|
|
case 0:
|
|
speed = 200;
|
|
break;
|
|
}
|
|
dd->ipath_htspeed = speed;
|
|
}
|
|
}
|
|
|
|
static int set_int_handler(struct ipath_devdata *dd, struct pci_dev *pdev,
|
|
int pos)
|
|
{
|
|
u32 int_handler_addr_lower;
|
|
u32 int_handler_addr_upper;
|
|
u64 ihandler;
|
|
u32 intvec;
|
|
|
|
/* use indirection register to get the intr handler */
|
|
pci_write_config_byte(pdev, pos + HT_INTR_REG_INDEX, 0x10);
|
|
pci_read_config_dword(pdev, pos + 4, &int_handler_addr_lower);
|
|
pci_write_config_byte(pdev, pos + HT_INTR_REG_INDEX, 0x11);
|
|
pci_read_config_dword(pdev, pos + 4, &int_handler_addr_upper);
|
|
|
|
ihandler = (u64) int_handler_addr_lower |
|
|
((u64) int_handler_addr_upper << 32);
|
|
|
|
/*
|
|
* kernels with CONFIG_PCI_MSI set the vector in the irq field of
|
|
* struct pci_device, so we use that to program the HT-400 internal
|
|
* interrupt register (not config space) with that value. The BIOS
|
|
* must still have done the basic MSI setup.
|
|
*/
|
|
intvec = pdev->irq;
|
|
/*
|
|
* clear any vector bits there; normally not set but we'll overload
|
|
* this for some debug purposes (setting the HTC debug register
|
|
* value from software, rather than GPIOs), so it might be set on a
|
|
* driver reload.
|
|
*/
|
|
ihandler &= ~0xff0000;
|
|
/* x86 vector goes in intrinfo[23:16] */
|
|
ihandler |= intvec << 16;
|
|
ipath_cdbg(VERBOSE, "ihandler lower %x, upper %x, intvec %x, "
|
|
"interruptconfig %llx\n", int_handler_addr_lower,
|
|
int_handler_addr_upper, intvec,
|
|
(unsigned long long) ihandler);
|
|
|
|
/* can't program yet, so save for interrupt setup */
|
|
dd->ipath_intconfig = ihandler;
|
|
/* keep going, so we find link control stuff also */
|
|
|
|
return ihandler != 0;
|
|
}
|
|
|
|
/**
|
|
* ipath_setup_ht_config - setup the interruptconfig register
|
|
* @dd: the infinipath device
|
|
* @pdev: the PCI device
|
|
*
|
|
* setup the interruptconfig register from the HT config info.
|
|
* Also clear CRC errors in HT linkcontrol, if necessary.
|
|
* This is done only for the real hardware. It is done before
|
|
* chip address space is initted, so can't touch infinipath registers
|
|
*/
|
|
static int ipath_setup_ht_config(struct ipath_devdata *dd,
|
|
struct pci_dev *pdev)
|
|
{
|
|
int pos, ret = 0;
|
|
int ihandler = 0;
|
|
|
|
/*
|
|
* Read the capability info to find the interrupt info, and also
|
|
* handle clearing CRC errors in linkctrl register if necessary. We
|
|
* do this early, before we ever enable errors or hardware errors,
|
|
* mostly to avoid causing the chip to enter freeze mode.
|
|
*/
|
|
pos = pci_find_capability(pdev, HT_CAPABILITY_ID);
|
|
if (!pos) {
|
|
ipath_dev_err(dd, "Couldn't find HyperTransport "
|
|
"capability; no interrupts\n");
|
|
ret = -ENODEV;
|
|
goto bail;
|
|
}
|
|
do {
|
|
u8 cap_type;
|
|
|
|
/* the HT capability type byte is 3 bytes after the
|
|
* capability byte.
|
|
*/
|
|
if (pci_read_config_byte(pdev, pos + 3, &cap_type)) {
|
|
dev_info(&pdev->dev, "Couldn't read config "
|
|
"command @ %d\n", pos);
|
|
continue;
|
|
}
|
|
if (!(cap_type & 0xE0))
|
|
slave_or_pri_blk(dd, pdev, pos, cap_type);
|
|
else if (cap_type == HT_INTR_DISC_CONFIG)
|
|
ihandler = set_int_handler(dd, pdev, pos);
|
|
} while ((pos = pci_find_next_capability(pdev, pos,
|
|
HT_CAPABILITY_ID)));
|
|
|
|
if (!ihandler) {
|
|
ipath_dev_err(dd, "Couldn't find interrupt handler in "
|
|
"config space\n");
|
|
ret = -ENODEV;
|
|
}
|
|
|
|
bail:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* ipath_setup_ht_cleanup - clean up any per-chip chip-specific stuff
|
|
* @dd: the infinipath device
|
|
*
|
|
* Called during driver unload.
|
|
* This is currently a nop for the HT-400, not for all chips
|
|
*/
|
|
static void ipath_setup_ht_cleanup(struct ipath_devdata *dd)
|
|
{
|
|
}
|
|
|
|
/**
|
|
* ipath_setup_ht_setextled - set the state of the two external LEDs
|
|
* @dd: the infinipath device
|
|
* @lst: the L state
|
|
* @ltst: the LT state
|
|
*
|
|
* Set the state of the two external LEDs, to indicate physical and
|
|
* logical state of IB link. For this chip (at least with recommended
|
|
* board pinouts), LED1 is Green (physical state), and LED2 is Yellow
|
|
* (logical state)
|
|
*
|
|
* Note: We try to match the Mellanox HCA LED behavior as best
|
|
* we can. Green indicates physical link state is OK (something is
|
|
* plugged in, and we can train).
|
|
* Amber indicates the link is logically up (ACTIVE).
|
|
* Mellanox further blinks the amber LED to indicate data packet
|
|
* activity, but we have no hardware support for that, so it would
|
|
* require waking up every 10-20 msecs and checking the counters
|
|
* on the chip, and then turning the LED off if appropriate. That's
|
|
* visible overhead, so not something we will do.
|
|
*
|
|
*/
|
|
static void ipath_setup_ht_setextled(struct ipath_devdata *dd,
|
|
u64 lst, u64 ltst)
|
|
{
|
|
u64 extctl;
|
|
|
|
/* the diags use the LED to indicate diag info, so we leave
|
|
* the external LED alone when the diags are running */
|
|
if (ipath_diag_inuse)
|
|
return;
|
|
|
|
/*
|
|
* start by setting both LED control bits to off, then turn
|
|
* on the appropriate bit(s).
|
|
*/
|
|
if (dd->ipath_boardrev == 8) { /* LS/X-1 uses different pins */
|
|
/*
|
|
* major difference is that INFINIPATH_EXTC_LEDGBLERR_OFF
|
|
* is inverted, because it is normally used to indicate
|
|
* a hardware fault at reset, if there were errors
|
|
*/
|
|
extctl = (dd->ipath_extctrl & ~INFINIPATH_EXTC_LEDGBLOK_ON)
|
|
| INFINIPATH_EXTC_LEDGBLERR_OFF;
|
|
if (ltst == INFINIPATH_IBCS_LT_STATE_LINKUP)
|
|
extctl &= ~INFINIPATH_EXTC_LEDGBLERR_OFF;
|
|
if (lst == INFINIPATH_IBCS_L_STATE_ACTIVE)
|
|
extctl |= INFINIPATH_EXTC_LEDGBLOK_ON;
|
|
}
|
|
else {
|
|
extctl = dd->ipath_extctrl &
|
|
~(INFINIPATH_EXTC_LED1PRIPORT_ON |
|
|
INFINIPATH_EXTC_LED2PRIPORT_ON);
|
|
if (ltst == INFINIPATH_IBCS_LT_STATE_LINKUP)
|
|
extctl |= INFINIPATH_EXTC_LED1PRIPORT_ON;
|
|
if (lst == INFINIPATH_IBCS_L_STATE_ACTIVE)
|
|
extctl |= INFINIPATH_EXTC_LED2PRIPORT_ON;
|
|
}
|
|
dd->ipath_extctrl = extctl;
|
|
ipath_write_kreg(dd, dd->ipath_kregs->kr_extctrl, extctl);
|
|
}
|
|
|
|
static void ipath_init_ht_variables(void)
|
|
{
|
|
ipath_gpio_sda_num = _IPATH_GPIO_SDA_NUM;
|
|
ipath_gpio_scl_num = _IPATH_GPIO_SCL_NUM;
|
|
ipath_gpio_sda = IPATH_GPIO_SDA;
|
|
ipath_gpio_scl = IPATH_GPIO_SCL;
|
|
|
|
infinipath_i_bitsextant =
|
|
(INFINIPATH_I_RCVURG_MASK << INFINIPATH_I_RCVURG_SHIFT) |
|
|
(INFINIPATH_I_RCVAVAIL_MASK <<
|
|
INFINIPATH_I_RCVAVAIL_SHIFT) |
|
|
INFINIPATH_I_ERROR | INFINIPATH_I_SPIOSENT |
|
|
INFINIPATH_I_SPIOBUFAVAIL | INFINIPATH_I_GPIO;
|
|
|
|
infinipath_e_bitsextant =
|
|
INFINIPATH_E_RFORMATERR | INFINIPATH_E_RVCRC |
|
|
INFINIPATH_E_RICRC | INFINIPATH_E_RMINPKTLEN |
|
|
INFINIPATH_E_RMAXPKTLEN | INFINIPATH_E_RLONGPKTLEN |
|
|
INFINIPATH_E_RSHORTPKTLEN | INFINIPATH_E_RUNEXPCHAR |
|
|
INFINIPATH_E_RUNSUPVL | INFINIPATH_E_REBP |
|
|
INFINIPATH_E_RIBFLOW | INFINIPATH_E_RBADVERSION |
|
|
INFINIPATH_E_RRCVEGRFULL | INFINIPATH_E_RRCVHDRFULL |
|
|
INFINIPATH_E_RBADTID | INFINIPATH_E_RHDRLEN |
|
|
INFINIPATH_E_RHDR | INFINIPATH_E_RIBLOSTLINK |
|
|
INFINIPATH_E_SMINPKTLEN | INFINIPATH_E_SMAXPKTLEN |
|
|
INFINIPATH_E_SUNDERRUN | INFINIPATH_E_SPKTLEN |
|
|
INFINIPATH_E_SDROPPEDSMPPKT | INFINIPATH_E_SDROPPEDDATAPKT |
|
|
INFINIPATH_E_SPIOARMLAUNCH | INFINIPATH_E_SUNEXPERRPKTNUM |
|
|
INFINIPATH_E_SUNSUPVL | INFINIPATH_E_IBSTATUSCHANGED |
|
|
INFINIPATH_E_INVALIDADDR | INFINIPATH_E_RESET |
|
|
INFINIPATH_E_HARDWARE;
|
|
|
|
infinipath_hwe_bitsextant =
|
|
(INFINIPATH_HWE_HTCMEMPARITYERR_MASK <<
|
|
INFINIPATH_HWE_HTCMEMPARITYERR_SHIFT) |
|
|
(INFINIPATH_HWE_TXEMEMPARITYERR_MASK <<
|
|
INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT) |
|
|
(INFINIPATH_HWE_RXEMEMPARITYERR_MASK <<
|
|
INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT) |
|
|
INFINIPATH_HWE_HTCLNKABYTE0CRCERR |
|
|
INFINIPATH_HWE_HTCLNKABYTE1CRCERR |
|
|
INFINIPATH_HWE_HTCLNKBBYTE0CRCERR |
|
|
INFINIPATH_HWE_HTCLNKBBYTE1CRCERR |
|
|
INFINIPATH_HWE_HTCMISCERR4 |
|
|
INFINIPATH_HWE_HTCMISCERR5 | INFINIPATH_HWE_HTCMISCERR6 |
|
|
INFINIPATH_HWE_HTCMISCERR7 |
|
|
INFINIPATH_HWE_HTCBUSTREQPARITYERR |
|
|
INFINIPATH_HWE_HTCBUSTRESPPARITYERR |
|
|
INFINIPATH_HWE_HTCBUSIREQPARITYERR |
|
|
INFINIPATH_HWE_RXDSYNCMEMPARITYERR |
|
|
INFINIPATH_HWE_MEMBISTFAILED |
|
|
INFINIPATH_HWE_COREPLL_FBSLIP |
|
|
INFINIPATH_HWE_COREPLL_RFSLIP |
|
|
INFINIPATH_HWE_HTBPLL_FBSLIP |
|
|
INFINIPATH_HWE_HTBPLL_RFSLIP |
|
|
INFINIPATH_HWE_HTAPLL_FBSLIP |
|
|
INFINIPATH_HWE_HTAPLL_RFSLIP |
|
|
INFINIPATH_HWE_SERDESPLLFAILED |
|
|
INFINIPATH_HWE_IBCBUSTOSPCPARITYERR |
|
|
INFINIPATH_HWE_IBCBUSFRSPCPARITYERR;
|
|
|
|
infinipath_i_rcvavail_mask = INFINIPATH_I_RCVAVAIL_MASK;
|
|
infinipath_i_rcvurg_mask = INFINIPATH_I_RCVURG_MASK;
|
|
}
|
|
|
|
/**
|
|
* ipath_ht_init_hwerrors - enable hardware errors
|
|
* @dd: the infinipath device
|
|
*
|
|
* now that we have finished initializing everything that might reasonably
|
|
* cause a hardware error, and cleared those errors bits as they occur,
|
|
* we can enable hardware errors in the mask (potentially enabling
|
|
* freeze mode), and enable hardware errors as errors (along with
|
|
* everything else) in errormask
|
|
*/
|
|
static void ipath_ht_init_hwerrors(struct ipath_devdata *dd)
|
|
{
|
|
ipath_err_t val;
|
|
u64 extsval;
|
|
|
|
extsval = ipath_read_kreg64(dd, dd->ipath_kregs->kr_extstatus);
|
|
|
|
if (!(extsval & INFINIPATH_EXTS_MEMBIST_ENDTEST))
|
|
ipath_dev_err(dd, "MemBIST did not complete!\n");
|
|
|
|
ipath_check_htlink(dd);
|
|
|
|
/* barring bugs, all hwerrors become interrupts, which can */
|
|
val = -1LL;
|
|
/* don't look at crc lane1 if 8 bit */
|
|
if (dd->ipath_flags & IPATH_8BIT_IN_HT0)
|
|
val &= ~infinipath_hwe_htclnkabyte1crcerr;
|
|
/* don't look at crc lane1 if 8 bit */
|
|
if (dd->ipath_flags & IPATH_8BIT_IN_HT1)
|
|
val &= ~infinipath_hwe_htclnkbbyte1crcerr;
|
|
|
|
/*
|
|
* disable RXDSYNCMEMPARITY because external serdes is unused,
|
|
* and therefore the logic will never be used or initialized,
|
|
* and uninitialized state will normally result in this error
|
|
* being asserted. Similarly for the external serdess pll
|
|
* lock signal.
|
|
*/
|
|
val &= ~(INFINIPATH_HWE_SERDESPLLFAILED |
|
|
INFINIPATH_HWE_RXDSYNCMEMPARITYERR);
|
|
|
|
/*
|
|
* Disable MISCERR4 because of an inversion in the HT core
|
|
* logic checking for errors that cause this bit to be set.
|
|
* The errata can also cause the protocol error bit to be set
|
|
* in the HT config space linkerror register(s).
|
|
*/
|
|
val &= ~INFINIPATH_HWE_HTCMISCERR4;
|
|
|
|
/*
|
|
* PLL ignored because MDIO interface has a logic problem
|
|
* for reads, on Comstock and Ponderosa. BRINGUP
|
|
*/
|
|
if (dd->ipath_boardrev == 4 || dd->ipath_boardrev == 9)
|
|
val &= ~INFINIPATH_HWE_SERDESPLLFAILED;
|
|
dd->ipath_hwerrmask = val;
|
|
}
|
|
|
|
/**
|
|
* ipath_ht_bringup_serdes - bring up the serdes
|
|
* @dd: the infinipath device
|
|
*/
|
|
static int ipath_ht_bringup_serdes(struct ipath_devdata *dd)
|
|
{
|
|
u64 val, config1;
|
|
int ret = 0, change = 0;
|
|
|
|
ipath_dbg("Trying to bringup serdes\n");
|
|
|
|
if (ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwerrstatus) &
|
|
INFINIPATH_HWE_SERDESPLLFAILED)
|
|
{
|
|
ipath_dbg("At start, serdes PLL failed bit set in "
|
|
"hwerrstatus, clearing and continuing\n");
|
|
ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
|
|
INFINIPATH_HWE_SERDESPLLFAILED);
|
|
}
|
|
|
|
val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig0);
|
|
config1 = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig1);
|
|
|
|
ipath_cdbg(VERBOSE, "Initial serdes status is config0=%llx "
|
|
"config1=%llx, sstatus=%llx xgxs %llx\n",
|
|
(unsigned long long) val, (unsigned long long) config1,
|
|
(unsigned long long)
|
|
ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesstatus),
|
|
(unsigned long long)
|
|
ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig));
|
|
|
|
/* force reset on */
|
|
val |= INFINIPATH_SERDC0_RESET_PLL
|
|
/* | INFINIPATH_SERDC0_RESET_MASK */
|
|
;
|
|
ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0, val);
|
|
udelay(15); /* need pll reset set at least for a bit */
|
|
|
|
if (val & INFINIPATH_SERDC0_RESET_PLL) {
|
|
u64 val2 = val &= ~INFINIPATH_SERDC0_RESET_PLL;
|
|
/* set lane resets, and tx idle, during pll reset */
|
|
val2 |= INFINIPATH_SERDC0_RESET_MASK |
|
|
INFINIPATH_SERDC0_TXIDLE;
|
|
ipath_cdbg(VERBOSE, "Clearing serdes PLL reset (writing "
|
|
"%llx)\n", (unsigned long long) val2);
|
|
ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0,
|
|
val2);
|
|
/*
|
|
* be sure chip saw it
|
|
*/
|
|
val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
|
|
/*
|
|
* need pll reset clear at least 11 usec before lane
|
|
* resets cleared; give it a few more
|
|
*/
|
|
udelay(15);
|
|
val = val2; /* for check below */
|
|
}
|
|
|
|
if (val & (INFINIPATH_SERDC0_RESET_PLL |
|
|
INFINIPATH_SERDC0_RESET_MASK |
|
|
INFINIPATH_SERDC0_TXIDLE)) {
|
|
val &= ~(INFINIPATH_SERDC0_RESET_PLL |
|
|
INFINIPATH_SERDC0_RESET_MASK |
|
|
INFINIPATH_SERDC0_TXIDLE);
|
|
/* clear them */
|
|
ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0,
|
|
val);
|
|
}
|
|
|
|
val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig);
|
|
if (((val >> INFINIPATH_XGXS_MDIOADDR_SHIFT) &
|
|
INFINIPATH_XGXS_MDIOADDR_MASK) != 3) {
|
|
val &= ~(INFINIPATH_XGXS_MDIOADDR_MASK <<
|
|
INFINIPATH_XGXS_MDIOADDR_SHIFT);
|
|
/*
|
|
* we use address 3
|
|
*/
|
|
val |= 3ULL << INFINIPATH_XGXS_MDIOADDR_SHIFT;
|
|
change = 1;
|
|
}
|
|
if (val & INFINIPATH_XGXS_RESET) {
|
|
/* normally true after boot */
|
|
val &= ~INFINIPATH_XGXS_RESET;
|
|
change = 1;
|
|
}
|
|
if (change)
|
|
ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val);
|
|
|
|
val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig0);
|
|
|
|
/* clear current and de-emphasis bits */
|
|
config1 &= ~0x0ffffffff00ULL;
|
|
/* set current to 20ma */
|
|
config1 |= 0x00000000000ULL;
|
|
/* set de-emphasis to -5.68dB */
|
|
config1 |= 0x0cccc000000ULL;
|
|
ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig1, config1);
|
|
|
|
ipath_cdbg(VERBOSE, "After setup: serdes status is config0=%llx "
|
|
"config1=%llx, sstatus=%llx xgxs %llx\n",
|
|
(unsigned long long) val, (unsigned long long) config1,
|
|
(unsigned long long)
|
|
ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesstatus),
|
|
(unsigned long long)
|
|
ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig));
|
|
|
|
if (!ipath_waitfor_mdio_cmdready(dd)) {
|
|
ipath_write_kreg(dd, dd->ipath_kregs->kr_mdio,
|
|
ipath_mdio_req(IPATH_MDIO_CMD_READ, 31,
|
|
IPATH_MDIO_CTRL_XGXS_REG_8,
|
|
0));
|
|
if (ipath_waitfor_complete(dd, dd->ipath_kregs->kr_mdio,
|
|
IPATH_MDIO_DATAVALID, &val))
|
|
ipath_dbg("Never got MDIO data for XGXS status "
|
|
"read\n");
|
|
else
|
|
ipath_cdbg(VERBOSE, "MDIO Read reg8, "
|
|
"'bank' 31 %x\n", (u32) val);
|
|
} else
|
|
ipath_dbg("Never got MDIO cmdready for XGXS status read\n");
|
|
|
|
return ret; /* for now, say we always succeeded */
|
|
}
|
|
|
|
/**
|
|
* ipath_ht_quiet_serdes - set serdes to txidle
|
|
* @dd: the infinipath device
|
|
* driver is being unloaded
|
|
*/
|
|
static void ipath_ht_quiet_serdes(struct ipath_devdata *dd)
|
|
{
|
|
u64 val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig0);
|
|
|
|
val |= INFINIPATH_SERDC0_TXIDLE;
|
|
ipath_dbg("Setting TxIdleEn on serdes (config0 = %llx)\n",
|
|
(unsigned long long) val);
|
|
ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0, val);
|
|
}
|
|
|
|
static int ipath_ht_intconfig(struct ipath_devdata *dd)
|
|
{
|
|
int ret;
|
|
|
|
if (!dd->ipath_intconfig) {
|
|
ipath_dev_err(dd, "No interrupts enabled, couldn't setup "
|
|
"interrupt address\n");
|
|
ret = 1;
|
|
goto bail;
|
|
}
|
|
|
|
ipath_write_kreg(dd, dd->ipath_kregs->kr_interruptconfig,
|
|
dd->ipath_intconfig); /* interrupt address */
|
|
ret = 0;
|
|
|
|
bail:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* ipath_pe_put_tid - write a TID in chip
|
|
* @dd: the infinipath device
|
|
* @tidptr: pointer to the expected TID (in chip) to udpate
|
|
* @tidtype: 0 for eager, 1 for expected
|
|
* @pa: physical address of in memory buffer; ipath_tidinvalid if freeing
|
|
*
|
|
* This exists as a separate routine to allow for special locking etc.
|
|
* It's used for both the full cleanup on exit, as well as the normal
|
|
* setup and teardown.
|
|
*/
|
|
static void ipath_ht_put_tid(struct ipath_devdata *dd,
|
|
u64 __iomem *tidptr, u32 type,
|
|
unsigned long pa)
|
|
{
|
|
if (pa != dd->ipath_tidinvalid) {
|
|
if (unlikely((pa & ~INFINIPATH_RT_ADDR_MASK))) {
|
|
dev_info(&dd->pcidev->dev,
|
|
"physaddr %lx has more than "
|
|
"40 bits, using only 40!!!\n", pa);
|
|
pa &= INFINIPATH_RT_ADDR_MASK;
|
|
}
|
|
if (type == 0)
|
|
pa |= dd->ipath_tidtemplate;
|
|
else {
|
|
/* in words (fixed, full page). */
|
|
u64 lenvalid = PAGE_SIZE >> 2;
|
|
lenvalid <<= INFINIPATH_RT_BUFSIZE_SHIFT;
|
|
pa |= lenvalid | INFINIPATH_RT_VALID;
|
|
}
|
|
}
|
|
if (dd->ipath_kregbase)
|
|
writeq(pa, tidptr);
|
|
}
|
|
|
|
/**
|
|
* ipath_ht_clear_tid - clear all TID entries for a port, expected and eager
|
|
* @dd: the infinipath device
|
|
* @port: the port
|
|
*
|
|
* Used from ipath_close(), and at chip initialization.
|
|
*/
|
|
static void ipath_ht_clear_tids(struct ipath_devdata *dd, unsigned port)
|
|
{
|
|
u64 __iomem *tidbase;
|
|
int i;
|
|
|
|
if (!dd->ipath_kregbase)
|
|
return;
|
|
|
|
ipath_cdbg(VERBOSE, "Invalidate TIDs for port %u\n", port);
|
|
|
|
/*
|
|
* need to invalidate all of the expected TID entries for this
|
|
* port, so we don't have valid entries that might somehow get
|
|
* used (early in next use of this port, or through some bug)
|
|
*/
|
|
tidbase = (u64 __iomem *) ((char __iomem *)(dd->ipath_kregbase) +
|
|
dd->ipath_rcvtidbase +
|
|
port * dd->ipath_rcvtidcnt *
|
|
sizeof(*tidbase));
|
|
for (i = 0; i < dd->ipath_rcvtidcnt; i++)
|
|
ipath_ht_put_tid(dd, &tidbase[i], 1, dd->ipath_tidinvalid);
|
|
|
|
tidbase = (u64 __iomem *) ((char __iomem *)(dd->ipath_kregbase) +
|
|
dd->ipath_rcvegrbase +
|
|
port * dd->ipath_rcvegrcnt *
|
|
sizeof(*tidbase));
|
|
|
|
for (i = 0; i < dd->ipath_rcvegrcnt; i++)
|
|
ipath_ht_put_tid(dd, &tidbase[i], 0, dd->ipath_tidinvalid);
|
|
}
|
|
|
|
/**
|
|
* ipath_ht_tidtemplate - setup constants for TID updates
|
|
* @dd: the infinipath device
|
|
*
|
|
* We setup stuff that we use a lot, to avoid calculating each time
|
|
*/
|
|
static void ipath_ht_tidtemplate(struct ipath_devdata *dd)
|
|
{
|
|
dd->ipath_tidtemplate = dd->ipath_ibmaxlen >> 2;
|
|
dd->ipath_tidtemplate <<= INFINIPATH_RT_BUFSIZE_SHIFT;
|
|
dd->ipath_tidtemplate |= INFINIPATH_RT_VALID;
|
|
|
|
/*
|
|
* work around chip errata bug 7358, by marking invalid tids
|
|
* as having max length
|
|
*/
|
|
dd->ipath_tidinvalid = (-1LL & INFINIPATH_RT_BUFSIZE_MASK) <<
|
|
INFINIPATH_RT_BUFSIZE_SHIFT;
|
|
}
|
|
|
|
static int ipath_ht_early_init(struct ipath_devdata *dd)
|
|
{
|
|
u32 __iomem *piobuf;
|
|
u32 pioincr, val32, egrsize;
|
|
int i;
|
|
|
|
/*
|
|
* one cache line; long IB headers will spill over into received
|
|
* buffer
|
|
*/
|
|
dd->ipath_rcvhdrentsize = 16;
|
|
dd->ipath_rcvhdrsize = IPATH_DFLT_RCVHDRSIZE;
|
|
|
|
/*
|
|
* For HT-400, we allocate a somewhat overly large eager buffer,
|
|
* such that we can guarantee that we can receive the largest
|
|
* packet that we can send out. To truly support a 4KB MTU,
|
|
* we need to bump this to a large value. To date, other than
|
|
* testing, we have never encountered an HCA that can really
|
|
* send 4KB MTU packets, so we do not handle that (we'll get
|
|
* errors interrupts if we ever see one).
|
|
*/
|
|
dd->ipath_rcvegrbufsize = dd->ipath_piosize2k;
|
|
egrsize = dd->ipath_rcvegrbufsize;
|
|
|
|
/*
|
|
* the min() check here is currently a nop, but it may not
|
|
* always be, depending on just how we do ipath_rcvegrbufsize
|
|
*/
|
|
dd->ipath_ibmaxlen = min(dd->ipath_piosize2k,
|
|
dd->ipath_rcvegrbufsize);
|
|
dd->ipath_init_ibmaxlen = dd->ipath_ibmaxlen;
|
|
ipath_ht_tidtemplate(dd);
|
|
|
|
/*
|
|
* zero all the TID entries at startup. We do this for sanity,
|
|
* in case of a previous driver crash of some kind, and also
|
|
* because the chip powers up with these memories in an unknown
|
|
* state. Use portcnt, not cfgports, since this is for the
|
|
* full chip, not for current (possibly different) configuration
|
|
* value.
|
|
* Chip Errata bug 6447
|
|
*/
|
|
for (val32 = 0; val32 < dd->ipath_portcnt; val32++)
|
|
ipath_ht_clear_tids(dd, val32);
|
|
|
|
/*
|
|
* write the pbc of each buffer, to be sure it's initialized, then
|
|
* cancel all the buffers, and also abort any packets that might
|
|
* have been in flight for some reason (the latter is for driver
|
|
* unload/reload, but isn't a bad idea at first init). PIO send
|
|
* isn't enabled at this point, so there is no danger of sending
|
|
* these out on the wire.
|
|
* Chip Errata bug 6610
|
|
*/
|
|
piobuf = (u32 __iomem *) (((char __iomem *)(dd->ipath_kregbase)) +
|
|
dd->ipath_piobufbase);
|
|
pioincr = dd->ipath_palign / sizeof(*piobuf);
|
|
for (i = 0; i < dd->ipath_piobcnt2k; i++) {
|
|
/*
|
|
* reasonable word count, just to init pbc
|
|
*/
|
|
writel(16, piobuf);
|
|
piobuf += pioincr;
|
|
}
|
|
/*
|
|
* self-clearing
|
|
*/
|
|
ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
|
|
INFINIPATH_S_ABORT);
|
|
|
|
ipath_get_eeprom_info(dd);
|
|
if(dd->ipath_boardrev == 5 && dd->ipath_serial[0] == '1' &&
|
|
dd->ipath_serial[1] == '2' && dd->ipath_serial[2] == '8') {
|
|
/*
|
|
* Later production HT-460 has same changes as HT-465, so
|
|
* can use GPIO interrupts. They have serial #'s starting
|
|
* with 128, rather than 112.
|
|
*/
|
|
dd->ipath_flags |= IPATH_GPIO_INTR;
|
|
dd->ipath_flags &= ~IPATH_POLL_RX_INTR;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ipath_init_ht_get_base_info - set chip-specific flags for user code
|
|
* @dd: the infinipath device
|
|
* @kbase: ipath_base_info pointer
|
|
*
|
|
* We set the PCIE flag because the lower bandwidth on PCIe vs
|
|
* HyperTransport can affect some user packet algorithims.
|
|
*/
|
|
static int ipath_ht_get_base_info(struct ipath_portdata *pd, void *kbase)
|
|
{
|
|
struct ipath_base_info *kinfo = kbase;
|
|
|
|
kinfo->spi_runtime_flags |= IPATH_RUNTIME_HT |
|
|
IPATH_RUNTIME_RCVHDR_COPY;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ipath_init_ht400_funcs - set up the chip-specific function pointers
|
|
* @dd: the infinipath device
|
|
*
|
|
* This is global, and is called directly at init to set up the
|
|
* chip-specific function pointers for later use.
|
|
*/
|
|
void ipath_init_ht400_funcs(struct ipath_devdata *dd)
|
|
{
|
|
dd->ipath_f_intrsetup = ipath_ht_intconfig;
|
|
dd->ipath_f_bus = ipath_setup_ht_config;
|
|
dd->ipath_f_reset = ipath_setup_ht_reset;
|
|
dd->ipath_f_get_boardname = ipath_ht_boardname;
|
|
dd->ipath_f_init_hwerrors = ipath_ht_init_hwerrors;
|
|
dd->ipath_f_early_init = ipath_ht_early_init;
|
|
dd->ipath_f_handle_hwerrors = ipath_ht_handle_hwerrors;
|
|
dd->ipath_f_quiet_serdes = ipath_ht_quiet_serdes;
|
|
dd->ipath_f_bringup_serdes = ipath_ht_bringup_serdes;
|
|
dd->ipath_f_clear_tids = ipath_ht_clear_tids;
|
|
dd->ipath_f_put_tid = ipath_ht_put_tid;
|
|
dd->ipath_f_cleanup = ipath_setup_ht_cleanup;
|
|
dd->ipath_f_setextled = ipath_setup_ht_setextled;
|
|
dd->ipath_f_get_base_info = ipath_ht_get_base_info;
|
|
|
|
/*
|
|
* initialize chip-specific variables
|
|
*/
|
|
dd->ipath_f_tidtemplate = ipath_ht_tidtemplate;
|
|
|
|
/*
|
|
* setup the register offsets, since they are different for each
|
|
* chip
|
|
*/
|
|
dd->ipath_kregs = &ipath_ht_kregs;
|
|
dd->ipath_cregs = &ipath_ht_cregs;
|
|
|
|
/*
|
|
* do very early init that is needed before ipath_f_bus is
|
|
* called
|
|
*/
|
|
ipath_init_ht_variables();
|
|
}
|