android_kernel_xiaomi_sm8350/Documentation/sched-rt-group.txt
Peter Zijlstra 9f0c1e560c sched: rt-group: interface
Change the rt_ratio interface to rt_runtime_us, to match rt_period_us.
This avoids picking a granularity for the ratio.

Extend the /sys/kernel/uids/<uid>/ interface to allow setting
the group's rt_runtime.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-13 15:45:39 +01:00

60 lines
1.7 KiB
Plaintext

Real-Time group scheduling.
The problem space:
In order to schedule multiple groups of realtime tasks each group must
be assigned a fixed portion of the CPU time available. Without a minimum
guarantee a realtime group can obviously fall short. A fuzzy upper limit
is of no use since it cannot be relied upon. Which leaves us with just
the single fixed portion.
CPU time is divided by means of specifying how much time can be spent
running in a given period. Say a frame fixed realtime renderer must
deliver 25 frames a second, which yields a period of 0.04s. Now say
it will also have to play some music and respond to input, leaving it
with around 80% for the graphics. We can then give this group a runtime
of 0.8 * 0.04s = 0.032s.
This way the graphics group will have a 0.04s period with a 0.032s runtime
limit.
Now if the audio thread needs to refill the DMA buffer every 0.005s, but
needs only about 3% CPU time to do so, it can do with a 0.03 * 0.005s
= 0.00015s.
The Interface:
system wide:
/proc/sys/kernel/sched_rt_period_ms
/proc/sys/kernel/sched_rt_runtime_us
CONFIG_FAIR_USER_SCHED
/sys/kernel/uids/<uid>/cpu_rt_runtime_us
or
CONFIG_FAIR_CGROUP_SCHED
/cgroup/<cgroup>/cpu.rt_runtime_us
[ time is specified in us because the interface is s32; this gives an
operating range of ~35m to 1us ]
The period takes values in [ 1, INT_MAX ], runtime in [ -1, INT_MAX - 1 ].
A runtime of -1 specifies runtime == period, ie. no limit.
New groups get the period from /proc/sys/kernel/sched_rt_period_us and
a runtime of 0.
Settings are constrained to:
\Sum_{i} runtime_{i} / global_period <= global_runtime / global_period
in order to keep the configuration schedulable.