96f1050d3d
Bill Gatliff & David Brownell pointed out we were missing some copyrights, and licensing terms in some of the files in ./arch/blackfin, so this fixes things, and cleans them up. It also removes: - verbose GPL text(refer to the top level ./COPYING file) - file names (you are looking at the file) - bug url (it's in the ./MAINTAINERS file) - "or later" on GPL-2, when we did not have that right It also allows some Blackfin-specific assembly files to be under a BSD like license (for people to use them outside of Linux). Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
132 lines
3.2 KiB
C
132 lines
3.2 KiB
C
/*
|
|
* Blackfin On-Chip SPI Driver
|
|
*
|
|
* Copyright 2004-2008 Analog Devices Inc.
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
|
|
#ifndef _SPI_CHANNEL_H_
|
|
#define _SPI_CHANNEL_H_
|
|
|
|
#define MIN_SPI_BAUD_VAL 2
|
|
|
|
#define SPI_READ 0
|
|
#define SPI_WRITE 1
|
|
|
|
#define SPI_CTRL_OFF 0x0
|
|
#define SPI_FLAG_OFF 0x4
|
|
#define SPI_STAT_OFF 0x8
|
|
#define SPI_TXBUFF_OFF 0xc
|
|
#define SPI_RXBUFF_OFF 0x10
|
|
#define SPI_BAUD_OFF 0x14
|
|
#define SPI_SHAW_OFF 0x18
|
|
|
|
|
|
#define BIT_CTL_ENABLE 0x4000
|
|
#define BIT_CTL_OPENDRAIN 0x2000
|
|
#define BIT_CTL_MASTER 0x1000
|
|
#define BIT_CTL_POLAR 0x0800
|
|
#define BIT_CTL_PHASE 0x0400
|
|
#define BIT_CTL_BITORDER 0x0200
|
|
#define BIT_CTL_WORDSIZE 0x0100
|
|
#define BIT_CTL_MISOENABLE 0x0020
|
|
#define BIT_CTL_RXMOD 0x0000
|
|
#define BIT_CTL_TXMOD 0x0001
|
|
#define BIT_CTL_TIMOD_DMA_TX 0x0003
|
|
#define BIT_CTL_TIMOD_DMA_RX 0x0002
|
|
#define BIT_CTL_SENDOPT 0x0004
|
|
#define BIT_CTL_TIMOD 0x0003
|
|
|
|
#define BIT_STAT_SPIF 0x0001
|
|
#define BIT_STAT_MODF 0x0002
|
|
#define BIT_STAT_TXE 0x0004
|
|
#define BIT_STAT_TXS 0x0008
|
|
#define BIT_STAT_RBSY 0x0010
|
|
#define BIT_STAT_RXS 0x0020
|
|
#define BIT_STAT_TXCOL 0x0040
|
|
#define BIT_STAT_CLR 0xFFFF
|
|
|
|
#define BIT_STU_SENDOVER 0x0001
|
|
#define BIT_STU_RECVFULL 0x0020
|
|
|
|
#define CFG_SPI_ENABLE 1
|
|
#define CFG_SPI_DISABLE 0
|
|
|
|
#define CFG_SPI_OUTENABLE 1
|
|
#define CFG_SPI_OUTDISABLE 0
|
|
|
|
#define CFG_SPI_ACTLOW 1
|
|
#define CFG_SPI_ACTHIGH 0
|
|
|
|
#define CFG_SPI_PHASESTART 1
|
|
#define CFG_SPI_PHASEMID 0
|
|
|
|
#define CFG_SPI_MASTER 1
|
|
#define CFG_SPI_SLAVE 0
|
|
|
|
#define CFG_SPI_SENELAST 0
|
|
#define CFG_SPI_SENDZERO 1
|
|
|
|
#define CFG_SPI_RCVFLUSH 1
|
|
#define CFG_SPI_RCVDISCARD 0
|
|
|
|
#define CFG_SPI_LSBFIRST 1
|
|
#define CFG_SPI_MSBFIRST 0
|
|
|
|
#define CFG_SPI_WORDSIZE16 1
|
|
#define CFG_SPI_WORDSIZE8 0
|
|
|
|
#define CFG_SPI_MISOENABLE 1
|
|
#define CFG_SPI_MISODISABLE 0
|
|
|
|
#define CFG_SPI_READ 0x00
|
|
#define CFG_SPI_WRITE 0x01
|
|
#define CFG_SPI_DMAREAD 0x02
|
|
#define CFG_SPI_DMAWRITE 0x03
|
|
|
|
#define CFG_SPI_CSCLEARALL 0
|
|
#define CFG_SPI_CHIPSEL1 1
|
|
#define CFG_SPI_CHIPSEL2 2
|
|
#define CFG_SPI_CHIPSEL3 3
|
|
#define CFG_SPI_CHIPSEL4 4
|
|
#define CFG_SPI_CHIPSEL5 5
|
|
#define CFG_SPI_CHIPSEL6 6
|
|
#define CFG_SPI_CHIPSEL7 7
|
|
|
|
#define CFG_SPI_CS1VALUE 1
|
|
#define CFG_SPI_CS2VALUE 2
|
|
#define CFG_SPI_CS3VALUE 3
|
|
#define CFG_SPI_CS4VALUE 4
|
|
#define CFG_SPI_CS5VALUE 5
|
|
#define CFG_SPI_CS6VALUE 6
|
|
#define CFG_SPI_CS7VALUE 7
|
|
|
|
#define CMD_SPI_SET_BAUDRATE 2
|
|
#define CMD_SPI_GET_SYSTEMCLOCK 25
|
|
#define CMD_SPI_SET_WRITECONTINUOUS 26
|
|
|
|
/* device.platform_data for SSP controller devices */
|
|
struct bfin5xx_spi_master {
|
|
u16 num_chipselect;
|
|
u8 enable_dma;
|
|
u16 pin_req[7];
|
|
};
|
|
|
|
/* spi_board_info.controller_data for SPI slave devices,
|
|
* copied to spi_device.platform_data ... mostly for dma tuning
|
|
*/
|
|
struct bfin5xx_spi_chip {
|
|
u16 ctl_reg;
|
|
u8 enable_dma;
|
|
u8 bits_per_word;
|
|
u8 cs_change_per_word;
|
|
u16 cs_chg_udelay; /* Some devices require 16-bit delays */
|
|
u32 cs_gpio;
|
|
/* Value to send if no TX value is supplied, usually 0x0 or 0xFFFF */
|
|
u16 idle_tx_val;
|
|
u8 pio_interrupt; /* Enable spi data irq */
|
|
};
|
|
|
|
#endif /* _SPI_CHANNEL_H_ */
|