android_kernel_xiaomi_sm8350/arch/i386/kernel/legacy_serial.c
Bjorn Helgaas 7e92b4fc34 x86, serial: convert legacy COM ports to platform devices
Make x86 COM ports into platform devices and don't probe for them
if we have PNP.

This prevents double discovery, where a device was found both by
the legacy probe and by 8250_pnp, e.g.,

    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

This also means IRDA devices without a UART PNP ID will no longer be
claimed by the serial driver, which might require changes in IRDA
drivers and administration.

In addition to this patch, you may need to configure a setserial init
script, e.g., /etc/init.d/setserial, so it doesn't poke legacy UART
stuff back in.  On Debian, "dpkg-reconfigure setserial" with the "kernel"
option does this.

To force the old legacy probe behavior even when we have PNPBIOS or
ACPI, load the new legacy_serial module (or build 8250 static) with
the "legacy_serial.force" option.

[akpm@linux-foundation.org: fix makefiles]
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Keith Owens <kaos@ocs.com.au>
Cc: Len Brown <lenb@kernel.org>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Matthieu CASTET <castet.matthieu@free.fr>
Cc: Jean Tourrilhes <jt@hpl.hp.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Ville Syrjala <syrjala@sci.fi>
Cc: Russell King <rmk+serial@arm.linux.org.uk>
Cc: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:23 -07:00

68 lines
1.8 KiB
C

/*
* Legacy COM port devices for x86 platforms without PNPBIOS or ACPI.
* Data taken from include/asm-i386/serial.h.
*
* (c) Copyright 2007 Hewlett-Packard Development Company, L.P.
* Bjorn Helgaas <bjorn.helgaas@hp.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pnp.h>
#include <linux/serial_8250.h>
/* Standard COM flags (except for COM4, because of the 8514 problem) */
#ifdef CONFIG_SERIAL_DETECT_IRQ
#define COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ)
#define COM4_FLAGS (UPF_BOOT_AUTOCONF | UPF_AUTO_IRQ)
#else
#define COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
#define COM4_FLAGS UPF_BOOT_AUTOCONF
#endif
#define PORT(_base,_irq,_flags) \
{ \
.iobase = _base, \
.irq = _irq, \
.uartclk = 1843200, \
.iotype = UPIO_PORT, \
.flags = _flags, \
}
static struct plat_serial8250_port x86_com_data[] = {
PORT(0x3F8, 4, COM_FLAGS),
PORT(0x2F8, 3, COM_FLAGS),
PORT(0x3E8, 4, COM_FLAGS),
PORT(0x2E8, 3, COM4_FLAGS),
{ },
};
static struct platform_device x86_com_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = x86_com_data,
},
};
static int force_legacy_probe;
module_param_named(force, force_legacy_probe, bool, 0);
MODULE_PARM_DESC(force, "Force legacy serial port probe");
static int __init serial8250_x86_com_init(void)
{
if (pnp_platform_devices && !force_legacy_probe)
return -ENODEV;
return platform_device_register(&x86_com_device);
}
module_init(serial8250_x86_com_init);
MODULE_AUTHOR("Bjorn Helgaas");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Generic 8250/16x50 legacy probe module");