01373a5c97
This changeset adds support for DiB7070P-based devices by adding the dib0070-driver and putting the appropriate layouts into dib0700_devices.c It also includes a new firmware for the dib0700 which is necessary to make the DiB7070-boards work and it also should fix the i2c-problems on some boards. Signed-off-by: Jean-Philippe Sibers <jpsibers@dibcom.fr> Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
581 lines
13 KiB
C
581 lines
13 KiB
C
/*
|
|
* Linux-DVB Driver for DiBcom's DiB0070 base-band RF Tuner.
|
|
*
|
|
* Copyright (C) 2005-7 DiBcom (http://www.dibcom.fr/)
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation, version 2.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/i2c.h>
|
|
|
|
#include "dvb_frontend.h"
|
|
|
|
#include "dib0070.h"
|
|
#include "dibx000_common.h"
|
|
|
|
static int debug;
|
|
module_param(debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
|
|
|
|
#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB0070: "); printk(args); printk("\n"); } } while (0)
|
|
|
|
#define DIB0070_P1D 0x00
|
|
#define DIB0070_P1F 0x01
|
|
#define DIB0070_P1G 0x03
|
|
#define DIB0070S_P1A 0x02
|
|
|
|
struct dib0070_state {
|
|
struct i2c_adapter *i2c;
|
|
struct dvb_frontend *fe;
|
|
const struct dib0070_config *cfg;
|
|
u16 wbd_ff_offset;
|
|
u8 revision;
|
|
};
|
|
|
|
static uint16_t dib0070_read_reg(struct dib0070_state *state, u8 reg)
|
|
{
|
|
u8 b[2];
|
|
struct i2c_msg msg[2] = {
|
|
{ .addr = state->cfg->i2c_address, .flags = 0, .buf = ®, .len = 1 },
|
|
{ .addr = state->cfg->i2c_address, .flags = I2C_M_RD, .buf = b, .len = 2 },
|
|
};
|
|
if (i2c_transfer(state->i2c, msg, 2) != 2) {
|
|
printk(KERN_WARNING "DiB0070 I2C read failed\n");
|
|
return 0;
|
|
}
|
|
return (b[0] << 8) | b[1];
|
|
}
|
|
|
|
static int dib0070_write_reg(struct dib0070_state *state, u8 reg, u16 val)
|
|
{
|
|
u8 b[3] = { reg, val >> 8, val & 0xff };
|
|
struct i2c_msg msg = { .addr = state->cfg->i2c_address, .flags = 0, .buf = b, .len = 3 };
|
|
if (i2c_transfer(state->i2c, &msg, 1) != 1) {
|
|
printk(KERN_WARNING "DiB0070 I2C write failed\n");
|
|
return -EREMOTEIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#define HARD_RESET(state) do { if (state->cfg->reset) { state->cfg->reset(state->fe,1); msleep(10); state->cfg->reset(state->fe,0); msleep(10); } } while (0)
|
|
|
|
static int dib0070_set_bandwidth(struct dvb_frontend *fe, struct dvb_frontend_parameters *ch)
|
|
{
|
|
struct dib0070_state *st = fe->tuner_priv;
|
|
u16 tmp = 0;
|
|
tmp = dib0070_read_reg(st, 0x02) & 0x3fff;
|
|
|
|
switch(BANDWIDTH_TO_KHZ(ch->u.ofdm.bandwidth)) {
|
|
case 8000:
|
|
tmp |= (0 << 14);
|
|
break;
|
|
case 7000:
|
|
tmp |= (1 << 14);
|
|
break;
|
|
case 6000:
|
|
tmp |= (2 << 14);
|
|
break;
|
|
case 5000:
|
|
default:
|
|
tmp |= (3 << 14);
|
|
break;
|
|
}
|
|
dib0070_write_reg(st, 0x02, tmp);
|
|
return 0;
|
|
}
|
|
|
|
static void dib0070_captrim(struct dib0070_state *st, u16 LO4)
|
|
{
|
|
int8_t captrim, fcaptrim, step_sign, step;
|
|
u16 adc, adc_diff = 3000;
|
|
|
|
|
|
|
|
dib0070_write_reg(st, 0x0f, 0xed10);
|
|
dib0070_write_reg(st, 0x17, 0x0034);
|
|
|
|
dib0070_write_reg(st, 0x18, 0x0032);
|
|
msleep(2);
|
|
|
|
step = captrim = fcaptrim = 64;
|
|
|
|
do {
|
|
step /= 2;
|
|
dib0070_write_reg(st, 0x14, LO4 | captrim);
|
|
msleep(1);
|
|
adc = dib0070_read_reg(st, 0x19);
|
|
|
|
dprintk( "CAPTRIM=%hd; ADC = %hd (ADC) & %dmV", captrim, adc, (u32) adc*(u32)1800/(u32)1024);
|
|
|
|
if (adc >= 400) {
|
|
adc -= 400;
|
|
step_sign = -1;
|
|
} else {
|
|
adc = 400 - adc;
|
|
step_sign = 1;
|
|
}
|
|
|
|
if (adc < adc_diff) {
|
|
dprintk( "CAPTRIM=%hd is closer to target (%hd/%hd)", captrim, adc, adc_diff);
|
|
adc_diff = adc;
|
|
fcaptrim = captrim;
|
|
|
|
|
|
|
|
}
|
|
captrim += (step_sign * step);
|
|
} while (step >= 1);
|
|
|
|
dib0070_write_reg(st, 0x14, LO4 | fcaptrim);
|
|
dib0070_write_reg(st, 0x18, 0x07ff);
|
|
}
|
|
|
|
#define LPF 100 // define for the loop filter 100kHz by default 16-07-06
|
|
#define LO4_SET_VCO_HFDIV(l, v, h) l |= ((v) << 11) | ((h) << 7)
|
|
#define LO4_SET_SD(l, s) l |= ((s) << 14) | ((s) << 12)
|
|
#define LO4_SET_CTRIM(l, c) l |= (c) << 10
|
|
static int dib0070_tune_digital(struct dvb_frontend *fe, struct dvb_frontend_parameters *ch)
|
|
{
|
|
struct dib0070_state *st = fe->tuner_priv;
|
|
u32 freq = ch->frequency/1000 + (BAND_OF_FREQUENCY(ch->frequency/1000) == BAND_VHF ? st->cfg->freq_offset_khz_vhf : st->cfg->freq_offset_khz_uhf);
|
|
|
|
u8 band = BAND_OF_FREQUENCY(freq), c;
|
|
|
|
/*******************VCO***********************************/
|
|
u16 lo4 = 0;
|
|
|
|
u8 REFDIV, PRESC = 2;
|
|
u32 FBDiv, Rest, FREF, VCOF_kHz;
|
|
u16 Num, Den;
|
|
/*******************FrontEnd******************************/
|
|
u16 value = 0;
|
|
|
|
dprintk( "Tuning for Band: %hd (%d kHz)", band, freq);
|
|
|
|
|
|
dib0070_write_reg(st, 0x17, 0x30);
|
|
|
|
dib0070_set_bandwidth(fe, ch); /* c is used as HF */
|
|
switch (st->revision) {
|
|
case DIB0070S_P1A:
|
|
switch (band) {
|
|
case BAND_LBAND:
|
|
LO4_SET_VCO_HFDIV(lo4, 1, 1);
|
|
c = 2;
|
|
break;
|
|
case BAND_SBAND:
|
|
LO4_SET_VCO_HFDIV(lo4, 0, 0);
|
|
LO4_SET_CTRIM(lo4, 1);;
|
|
c = 1;
|
|
break;
|
|
case BAND_UHF:
|
|
default:
|
|
if (freq < 570000) {
|
|
LO4_SET_VCO_HFDIV(lo4, 1, 3);
|
|
PRESC = 6; c = 6;
|
|
} else if (freq < 680000) {
|
|
LO4_SET_VCO_HFDIV(lo4, 0, 2);
|
|
c = 4;
|
|
} else {
|
|
LO4_SET_VCO_HFDIV(lo4, 1, 2);
|
|
c = 4;
|
|
}
|
|
break;
|
|
} break;
|
|
|
|
case DIB0070_P1G:
|
|
case DIB0070_P1F:
|
|
default:
|
|
switch (band) {
|
|
case BAND_FM:
|
|
LO4_SET_VCO_HFDIV(lo4, 0, 7);
|
|
c = 24;
|
|
break;
|
|
case BAND_LBAND:
|
|
LO4_SET_VCO_HFDIV(lo4, 1, 0);
|
|
c = 2;
|
|
break;
|
|
case BAND_VHF:
|
|
if (freq < 180000) {
|
|
LO4_SET_VCO_HFDIV(lo4, 0, 3);
|
|
c = 16;
|
|
} else if (freq < 190000) {
|
|
LO4_SET_VCO_HFDIV(lo4, 1, 3);
|
|
c = 16;
|
|
} else {
|
|
LO4_SET_VCO_HFDIV(lo4, 0, 6);
|
|
c = 12;
|
|
}
|
|
break;
|
|
|
|
case BAND_UHF:
|
|
default:
|
|
if (freq < 570000) {
|
|
LO4_SET_VCO_HFDIV(lo4, 1, 5);
|
|
c = 6;
|
|
} else if (freq < 700000) {
|
|
LO4_SET_VCO_HFDIV(lo4, 0, 1);
|
|
c = 4;
|
|
} else {
|
|
LO4_SET_VCO_HFDIV(lo4, 1, 1);
|
|
c = 4;
|
|
}
|
|
break;
|
|
}
|
|
break;
|
|
}
|
|
|
|
dprintk( "HFDIV code: %hd", (lo4 >> 7) & 0xf);
|
|
dprintk( "VCO = %hd", (lo4 >> 11) & 0x3);
|
|
|
|
|
|
VCOF_kHz = (c * freq) * 2;
|
|
dprintk( "VCOF in kHz: %d ((%hd*%d) << 1))",VCOF_kHz, c, freq);
|
|
|
|
switch (band) {
|
|
case BAND_VHF:
|
|
REFDIV = (u8) ((st->cfg->clock_khz + 9999) / 10000);
|
|
break;
|
|
case BAND_FM:
|
|
REFDIV = (u8) ((st->cfg->clock_khz) / 1000);
|
|
break;
|
|
default:
|
|
REFDIV = (u8) ( st->cfg->clock_khz / 10000);
|
|
break;
|
|
}
|
|
FREF = st->cfg->clock_khz / REFDIV;
|
|
|
|
dprintk( "REFDIV: %hd, FREF: %d", REFDIV, FREF);
|
|
|
|
|
|
|
|
switch (st->revision) {
|
|
case DIB0070S_P1A:
|
|
FBDiv = (VCOF_kHz / PRESC / FREF);
|
|
Rest = (VCOF_kHz / PRESC) - FBDiv * FREF;
|
|
break;
|
|
|
|
case DIB0070_P1G:
|
|
case DIB0070_P1F:
|
|
default:
|
|
FBDiv = (freq / (FREF / 2));
|
|
Rest = 2 * freq - FBDiv * FREF;
|
|
break;
|
|
}
|
|
|
|
|
|
if (Rest < LPF) Rest = 0;
|
|
else if (Rest < 2 * LPF) Rest = 2 * LPF;
|
|
else if (Rest > (FREF - LPF)) { Rest = 0 ; FBDiv += 1; }
|
|
else if (Rest > (FREF - 2 * LPF)) Rest = FREF - 2 * LPF;
|
|
Rest = (Rest * 6528) / (FREF / 10);
|
|
dprintk( "FBDIV: %d, Rest: %d", FBDiv, Rest);
|
|
|
|
Num = 0;
|
|
Den = 1;
|
|
|
|
if (Rest > 0) {
|
|
LO4_SET_SD(lo4, 1);
|
|
Den = 255;
|
|
Num = (u16)Rest;
|
|
}
|
|
dprintk( "Num: %hd, Den: %hd, SD: %hd",Num, Den, (lo4 >> 12) & 0x1);
|
|
|
|
|
|
|
|
dib0070_write_reg(st, 0x11, (u16)FBDiv);
|
|
|
|
|
|
dib0070_write_reg(st, 0x12, (Den << 8) | REFDIV);
|
|
|
|
|
|
dib0070_write_reg(st, 0x13, Num);
|
|
|
|
|
|
value = 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001;
|
|
|
|
switch (band) {
|
|
case BAND_UHF: value |= 0x4000 | 0x0800; break;
|
|
case BAND_LBAND: value |= 0x2000 | 0x0400; break;
|
|
default: value |= 0x8000 | 0x1000; break;
|
|
}
|
|
dib0070_write_reg(st, 0x20, value);
|
|
|
|
dib0070_captrim(st, lo4);
|
|
if (st->revision == DIB0070S_P1A) {
|
|
if (band == BAND_SBAND)
|
|
dib0070_write_reg(st, 0x15, 0x16e2);
|
|
else
|
|
dib0070_write_reg(st, 0x15, 0x56e5);
|
|
}
|
|
|
|
|
|
|
|
switch (band) {
|
|
case BAND_UHF: value = 0x7c82; break;
|
|
case BAND_LBAND: value = 0x7c84; break;
|
|
default: value = 0x7c81; break;
|
|
}
|
|
dib0070_write_reg(st, 0x0f, value);
|
|
dib0070_write_reg(st, 0x06, 0x3fff);
|
|
|
|
/* Front End */
|
|
/* c == TUNE, value = SWITCH */
|
|
c = 0;
|
|
value = 0;
|
|
switch (band) {
|
|
case BAND_FM:
|
|
c = 0; value = 1;
|
|
break;
|
|
|
|
case BAND_VHF:
|
|
if (freq <= 180000) c = 0;
|
|
else if (freq <= 188200) c = 1;
|
|
else if (freq <= 196400) c = 2;
|
|
else c = 3;
|
|
value = 1;
|
|
break;
|
|
|
|
case BAND_LBAND:
|
|
if (freq <= 1500000) c = 0;
|
|
else if (freq <= 1600000) c = 1;
|
|
else c = 3;
|
|
break;
|
|
|
|
case BAND_SBAND:
|
|
c = 7;
|
|
dib0070_write_reg(st, 0x1d,0xFFFF);
|
|
break;
|
|
|
|
case BAND_UHF:
|
|
default:
|
|
if (st->cfg->flip_chip) {
|
|
if (freq <= 550000) c = 0;
|
|
else if (freq <= 590000) c = 1;
|
|
else if (freq <= 666000) c = 3;
|
|
else c = 5;
|
|
} else {
|
|
if (freq <= 550000) c = 2;
|
|
else if (freq <= 650000) c = 3;
|
|
else if (freq <= 750000) c = 5;
|
|
else if (freq <= 850000) c = 6;
|
|
else c = 7;
|
|
}
|
|
value = 2;
|
|
break;
|
|
}
|
|
|
|
/* default: LNA_MATCH=7, BIAS=3 */
|
|
dib0070_write_reg(st, 0x07, (value << 11) | (7 << 8) | (c << 3) | (3 << 0));
|
|
dib0070_write_reg(st, 0x08, (c << 10) | (3 << 7) | (127));
|
|
dib0070_write_reg(st, 0x0d, 0x0d80);
|
|
|
|
|
|
dib0070_write_reg(st, 0x18, 0x07ff);
|
|
dib0070_write_reg(st, 0x17, 0x0033);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dib0070_wakeup(struct dvb_frontend *fe)
|
|
{
|
|
struct dib0070_state *st = fe->tuner_priv;
|
|
if (st->cfg->sleep)
|
|
st->cfg->sleep(fe, 0);
|
|
return 0;
|
|
}
|
|
|
|
static int dib0070_sleep(struct dvb_frontend *fe)
|
|
{
|
|
struct dib0070_state *st = fe->tuner_priv;
|
|
if (st->cfg->sleep)
|
|
st->cfg->sleep(fe, 1);
|
|
return 0;
|
|
}
|
|
|
|
static u16 dib0070_p1f_defaults[] =
|
|
|
|
{
|
|
7, 0x02,
|
|
0x0008,
|
|
0x0000,
|
|
0x0000,
|
|
0x0000,
|
|
0x0000,
|
|
0x0002,
|
|
0x0100,
|
|
|
|
3, 0x0d,
|
|
0x0d80,
|
|
0x0001,
|
|
0x0000,
|
|
|
|
4, 0x11,
|
|
0x0000,
|
|
0x0103,
|
|
0x0000,
|
|
0x0000,
|
|
|
|
3, 0x16,
|
|
0x0004 | 0x0040,
|
|
0x0030,
|
|
0x07ff,
|
|
|
|
6, 0x1b,
|
|
0x4112,
|
|
0xff00,
|
|
0xc07f,
|
|
0x0000,
|
|
0x0180,
|
|
0x4000 | 0x0800 | 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001,
|
|
|
|
0,
|
|
};
|
|
|
|
static void dib0070_wbd_calibration(struct dib0070_state *state)
|
|
{
|
|
u16 wbd_offs;
|
|
dib0070_write_reg(state, 0x0f, 0x6d81);
|
|
dib0070_write_reg(state, 0x20, 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001);
|
|
msleep(9);
|
|
wbd_offs = dib0070_read_reg(state, 0x19);
|
|
dib0070_write_reg(state, 0x20, 0);
|
|
state->wbd_ff_offset = ((wbd_offs * 8 * 18 / 33 + 1) / 2);
|
|
dprintk( "WBDStart = %d (Vargen) - FF = %hd", (u32) wbd_offs * 1800/1024, state->wbd_ff_offset);
|
|
}
|
|
|
|
u16 dib0070_wbd_offset(struct dvb_frontend *fe)
|
|
{
|
|
struct dib0070_state *st = fe->tuner_priv;
|
|
return st->wbd_ff_offset;
|
|
}
|
|
|
|
EXPORT_SYMBOL(dib0070_wbd_offset);
|
|
static int dib0070_set_ctrl_lo5(struct dvb_frontend *fe, u8 vco_bias_trim, u8 hf_div_trim, u8 cp_current, u8 third_order_filt)
|
|
{
|
|
struct dib0070_state *state = fe->tuner_priv;
|
|
u16 lo5 = (third_order_filt << 14) | (0 << 13) | (1 << 12) | (3 << 9) | (cp_current << 6) | (hf_div_trim << 3) | (vco_bias_trim << 0);
|
|
dprintk( "CTRL_LO5: 0x%x", lo5);
|
|
return dib0070_write_reg(state, 0x15, lo5);
|
|
}
|
|
|
|
#define pgm_read_word(w) (*w)
|
|
static int dib0070_reset(struct dib0070_state *state)
|
|
{
|
|
u16 l, r, *n;
|
|
|
|
HARD_RESET(state);
|
|
|
|
|
|
#ifndef FORCE_SBAND_TUNER
|
|
if ((dib0070_read_reg(state, 0x22) >> 9) & 0x1)
|
|
state->revision = (dib0070_read_reg(state, 0x1f) >> 8) & 0xff;
|
|
else
|
|
#endif
|
|
state->revision = DIB0070S_P1A;
|
|
|
|
/* P1F or not */
|
|
dprintk( "Revision: %x", state->revision);
|
|
|
|
if (state->revision == DIB0070_P1D) {
|
|
dprintk( "Error: this driver is not to be used meant for P1D or earlier");
|
|
return -EINVAL;
|
|
}
|
|
|
|
n = (u16 *) dib0070_p1f_defaults;
|
|
l = pgm_read_word(n++);
|
|
while (l) {
|
|
r = pgm_read_word(n++);
|
|
do {
|
|
dib0070_write_reg(state, (u8)r, pgm_read_word(n++));
|
|
r++;
|
|
} while (--l);
|
|
l = pgm_read_word(n++);
|
|
}
|
|
|
|
if (state->cfg->force_crystal_mode != 0)
|
|
r = state->cfg->force_crystal_mode;
|
|
else if (state->cfg->clock_khz >= 24000)
|
|
r = 1;
|
|
else
|
|
r = 2;
|
|
|
|
r |= state->cfg->osc_buffer_state << 3;
|
|
|
|
dib0070_write_reg(state, 0x10, r);
|
|
dib0070_write_reg(state, 0x1f, (1 << 8) | ((state->cfg->clock_pad_drive & 0xf) << 4));
|
|
|
|
if (state->cfg->invert_iq) {
|
|
r = dib0070_read_reg(state, 0x02) & 0xffdf;
|
|
dib0070_write_reg(state, 0x02, r | (1 << 5));
|
|
}
|
|
|
|
|
|
if (state->revision == DIB0070S_P1A)
|
|
dib0070_set_ctrl_lo5(state->fe, 4, 7, 3, 1);
|
|
else
|
|
dib0070_set_ctrl_lo5(state->fe, 4, 4, 2, 0);
|
|
|
|
dib0070_write_reg(state, 0x01, (54 << 9) | 0xc8);
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int dib0070_release(struct dvb_frontend *fe)
|
|
{
|
|
kfree(fe->tuner_priv);
|
|
fe->tuner_priv = NULL;
|
|
return 0;
|
|
}
|
|
|
|
static struct dvb_tuner_ops dib0070_ops = {
|
|
.info = {
|
|
.name = "DiBcom DiB0070",
|
|
.frequency_min = 45000000,
|
|
.frequency_max = 860000000,
|
|
.frequency_step = 1000,
|
|
},
|
|
.release = dib0070_release,
|
|
|
|
.init = dib0070_wakeup,
|
|
.sleep = dib0070_sleep,
|
|
.set_params = dib0070_tune_digital,
|
|
// .get_frequency = dib0070_get_frequency,
|
|
// .get_bandwidth = dib0070_get_bandwidth
|
|
};
|
|
|
|
struct dvb_frontend * dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg)
|
|
{
|
|
struct dib0070_state *state = kzalloc(sizeof(struct dib0070_state), GFP_KERNEL);
|
|
if (state == NULL)
|
|
return NULL;
|
|
|
|
state->cfg = cfg;
|
|
state->i2c = i2c;
|
|
state->fe = fe;
|
|
fe->tuner_priv = state;
|
|
|
|
if (dib0070_reset(state) != 0)
|
|
goto free_mem;
|
|
|
|
dib0070_wbd_calibration(state);
|
|
|
|
printk(KERN_INFO "DiB0070: successfully identified\n");
|
|
memcpy(&fe->ops.tuner_ops, &dib0070_ops, sizeof(struct dvb_tuner_ops));
|
|
|
|
fe->tuner_priv = state;
|
|
return fe;
|
|
|
|
free_mem:
|
|
kfree(state);
|
|
fe->tuner_priv = NULL;
|
|
return NULL;
|
|
}
|
|
EXPORT_SYMBOL(dib0070_attach);
|
|
|
|
MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
|
|
MODULE_DESCRIPTION("Driver for the DiBcom 0070 base-band RF Tuner");
|
|
MODULE_LICENSE("GPL");
|