Rakesh Pillai 246f1dfdd2 qcacld-3.0: Add support to flush rx packets for a vdev ... When a particular vdev is deleted, the corresponding rx packets which have been queued to the rx thread are not flushed. Hence when such packets are submitted to the network stack, the dev for this skb will be invalid, since we have already freed the adapter. Flush out the packets in the rx thread queues, before deleting the vdev. CRs-Fixed: 2552140 Change-Id: Ia49af2c203c64077f7fd87524bb4caa4060e0044		2019-11-01 00:17:18 -07:00
..
hdd_config.h	qcacld-3.0: Do not assert on reinit failure	2019-10-29 10:58:37 -07:00
hdd_dp_cfg.h	qcacld-3.0: Fix CFG_RX_MODE_DEFAULT redefined error	2019-10-15 05:16:12 -07:00
qc_sap_ioctl.h	qcacld-3.0: Move sta_info from array based to hash based	2019-10-15 00:48:54 -07:00
wlan_hdd_apf.h
wlan_hdd_assoc.h	qcacld-3.0: Update HDD for using channel frequency for STA connection	2019-10-26 03:05:44 -07:00
wlan_hdd_bcn_recv.h	qcacld-3.0: Handle BEACON_REPORTING_DO_NOT_RESUME vendor attribute	2019-06-18 07:51:15 -07:00
wlan_hdd_cfg.h	qcacld-3.0: Add operating frequency in hdd_config	2019-09-20 23:36:02 -07:00
wlan_hdd_conc_ut.h
wlan_hdd_data_stall_detection.h
wlan_hdd_debugfs_coex.h	qcacld-3.0: Add support to improve coex logging	2019-03-29 00:47:53 -07:00
wlan_hdd_debugfs_csr.h	qcacld-3.0: Fix markings	2019-02-22 21:23:30 -08:00
wlan_hdd_debugfs_llstat.h
wlan_hdd_debugfs.h
wlan_hdd_driver_ops.h	qcacld-3.0: Wait for PM freeze when turning wifi on	2019-09-04 22:23:52 -07:00
wlan_hdd_ether.h
wlan_hdd_ftm.h
wlan_hdd_fw_state.h	qcacld-3.0: Support firmware state check through cfg80211 vendor cmd	2019-03-01 09:23:49 -08:00
wlan_hdd_he.h
wlan_hdd_host_offload.h	qcacld-3.0: Replace multiple IPv4/v6 address len macros with QDF macro	2019-04-16 19:57:47 -07:00
wlan_hdd_includes.h
wlan_hdd_ipa.h	qcacld-3.0: abstract Linux identifiers from IPA component	2019-05-31 02:29:49 -07:00
wlan_hdd_lro.h
wlan_hdd_main.h	qcacld-3.0: ACS changes for 6ghz support	2019-10-29 19:23:44 -07:00
wlan_hdd_misc.h	qcacld-3.0: add build flag DYNAMIC_SINGLE_CHIP	2019-04-30 22:27:24 -07:00
wlan_hdd_mpta_helper.h	qcacld-3.0: Add MPTA helper support	2019-03-15 07:46:59 -07:00
wlan_hdd_nan.h	qcacld-3.0: Remove unused wlan_hdd_cfg80211_nan_*() stubs	2019-03-07 22:22:42 -08:00
wlan_hdd_napi.h
wlan_hdd_oemdata.h	qcacld-3.0: Replace channel with frequency in channel_info	2019-09-23 14:52:27 -07:00
wlan_hdd_p2p.h	qcacld-3.0: Process rx_mgmt_pkt based on frequency	2019-10-18 02:55:17 -07:00
wlan_hdd_packet_filter_api.h	qcacld-3.0: Use vdev_id in wlan_hdd_set_filter()	2019-02-27 09:55:42 -08:00
wlan_hdd_packet_filter_rules.h
wlan_hdd_power.h
wlan_hdd_regulatory.h	qcacld-3.0: Ignore regulatory offload indication from FW	2019-10-12 19:03:35 -07:00
wlan_hdd_softap_tx_rx.h	qcacld-3.0: Move sta_info from array based to hash based	2019-10-15 00:48:54 -07:00
wlan_hdd_spectralscan.h	qcacld-3.0: Set rx chainmask before start spectral scan	2019-09-14 21:25:56 -07:00
wlan_hdd_sysfs.h
wlan_hdd_tdls.h	qcacld-3.0: Cleanup sta_index in TDLS structures and APIs	2019-10-22 09:05:33 -07:00
wlan_hdd_trace.h
wlan_hdd_tsf.h	qcacld-3.0: Add support for gpio based strobe to capture tsf	2019-08-21 00:06:01 -07:00
wlan_hdd_twt.h	qcacld-3.0: Re-enable TWT before host TWT trigger mode	2019-10-09 16:16:43 -07:00
wlan_hdd_tx_rx.h	qcacld-3.0: Add support to flush rx packets for a vdev	2019-11-01 00:17:18 -07:00
wlan_hdd_wext.h	qcacld-3.0: Add support to configure HE SGI for SAP	2019-09-25 04:58:53 -07:00
wlan_hdd_wmm.h	qcacld-3.0: Rename HDD identifier wmmPrevTrafficCnt	2019-03-13 09:31:53 -07:00
wlan_hdd_wowl.h