b45d527974
This is a driver for the SB1250 DUART, a dual serial port implementation included in the Broadcom family of SOCs descending from the SiByte SB1250 MIPS64 chip multiprocessor. It is a new implementation replacing the old-fashioned driver currently present in the linux-mips.org tree. It supports all the usual features one would expect from a(n asynchronous) serial driver, including modem line control (as far as hardware supports it -- there is edge detection logic missing from the DCD and RI lines and the driver does not implement polling of these lines at the moment), the serial console, BREAK transmission and reception, including the magic SysRq. The receive FIFO threshold is not maintained though. The driver was tested with a SWARM board which uses a BCM1250 SOC (which is dual MIPS64 CMP) and has both ports of the single DUART implemented wired externally. Both were tested. Testing included using the ports as terminal lines at 1200bps (which is the ports minimum), 115200bps and a couple of random speeds inbetween. The modem lines were verified to operate correctly. No testing was performed with a use as a network interface, like with SLIP or PPP. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
66 lines
2.6 KiB
Makefile
66 lines
2.6 KiB
Makefile
#
|
|
# Makefile for the kernel serial device drivers.
|
|
#
|
|
# $Id: Makefile,v 1.8 2002/07/21 21:32:30 rmk Exp $
|
|
#
|
|
|
|
obj-$(CONFIG_SERIAL_CORE) += serial_core.o
|
|
obj-$(CONFIG_SERIAL_21285) += 21285.o
|
|
obj-$(CONFIG_SERIAL_8250) += 8250.o
|
|
obj-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o
|
|
obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o
|
|
obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o
|
|
obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o
|
|
obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o
|
|
obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o
|
|
obj-$(CONFIG_SERIAL_8250_CONSOLE) += 8250_early.o
|
|
obj-$(CONFIG_SERIAL_8250_FOURPORT) += 8250_fourport.o
|
|
obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o
|
|
obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o
|
|
obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o
|
|
obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
|
|
obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
|
|
obj-$(CONFIG_SERIAL_8250_AU1X00) += 8250_au1x00.o
|
|
obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
|
|
obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
|
|
obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
|
|
obj-$(CONFIG_SERIAL_PXA) += pxa.o
|
|
obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o
|
|
obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
|
|
obj-$(CONFIG_SERIAL_BFIN) += bfin_5xx.o
|
|
obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o
|
|
obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o
|
|
obj-$(CONFIG_SERIAL_SUNHV) += sunhv.o
|
|
obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o
|
|
obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
|
|
obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o
|
|
obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o
|
|
obj-$(CONFIG_SERIAL_MUX) += mux.o
|
|
obj-$(CONFIG_SERIAL_68328) += 68328serial.o
|
|
obj-$(CONFIG_SERIAL_68360) += 68360serial.o
|
|
obj-$(CONFIG_SERIAL_COLDFIRE) += mcfserial.o
|
|
obj-$(CONFIG_V850E_UART) += v850e_uart.o
|
|
obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
|
|
obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o
|
|
obj-$(CONFIG_SERIAL_DZ) += dz.o
|
|
obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o
|
|
obj-$(CONFIG_SERIAL_SGI_L1_CONSOLE) += sn_console.o
|
|
obj-$(CONFIG_SERIAL_CPM) += cpm_uart/
|
|
obj-$(CONFIG_SERIAL_IMX) += imx.o
|
|
obj-$(CONFIG_SERIAL_MPC52xx) += mpc52xx_uart.o
|
|
obj-$(CONFIG_SERIAL_ICOM) += icom.o
|
|
obj-$(CONFIG_SERIAL_M32R_SIO) += m32r_sio.o
|
|
obj-$(CONFIG_SERIAL_MPSC) += mpsc.o
|
|
obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o
|
|
obj-$(CONFIG_ETRAX_SERIAL) += crisv10.o
|
|
obj-$(CONFIG_SERIAL_JSM) += jsm/
|
|
obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o
|
|
obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o
|
|
obj-$(CONFIG_SERIAL_SGI_IOC4) += ioc4_serial.o
|
|
obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o
|
|
obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
|
|
obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
|
|
obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
|
|
obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
|
|
obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
|