..
board-2430sdp.c
OMAP2/3 board-*.c files: read bootloader configuration earlier
2009-09-03 20:14:02 +03:00
board-3430sdp.c
omap: Fix omap-keypad by restoring old keypad.h without breaking omap2 boards that use matrix_keypad
2009-10-22 14:43:17 -07:00
board-4430sdp.c
omap4: Allow omap_serial_early_init() for OMAP4430 board
2009-10-22 15:41:16 -07:00
board-apollon.c
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2009-09-20 05:55:36 -07:00
board-generic.c
OMAP2/3 board-*.c files: read bootloader configuration earlier
2009-09-03 20:14:02 +03:00
board-h4.c
OMAP2/3 board-*.c files: read bootloader configuration earlier
2009-09-03 20:14:02 +03:00
board-ldp.c
omap: Fix omap-keypad by restoring old keypad.h without breaking omap2 boards that use matrix_keypad
2009-10-22 14:43:17 -07:00
board-n8x0.c
OMAP2: add board file for Nokia N800 and N810
2009-08-28 10:51:38 -07:00
board-omap3beagle.c
omap: Fix MMC gpio_wp for BeagleBoard C2 and above
2009-09-24 16:23:17 -07:00
board-omap3evm.c
omap: Fix omap-keypad by restoring old keypad.h without breaking omap2 boards that use matrix_keypad
2009-10-22 14:43:17 -07:00
board-omap3pandora.c
omap3: pandora: Fix keypad keymap
2009-11-11 11:04:08 -08:00
board-overo.c
OMAP2/3 board-*.c files: read bootloader configuration earlier
2009-09-03 20:14:02 +03:00
board-rx51-peripherals.c
omap: Fix omap-keypad by restoring old keypad.h without breaking omap2 boards that use matrix_keypad
2009-10-22 14:43:17 -07:00
board-rx51.c
omap: Fix omap-keypad by restoring old keypad.h without breaking omap2 boards that use matrix_keypad
2009-10-22 14:43:17 -07:00
board-zoom2.c
omap: Fix omap-keypad by restoring old keypad.h without breaking omap2 boards that use matrix_keypad
2009-10-22 14:43:17 -07:00
board-zoom-debugboard.c
OMAP: Zoom2: release debug board detect gpio line
2009-09-02 15:07:56 -07:00
clock24xx.c
OMAP2xxx clock: set up clockdomain pointer in struct clk
2009-10-14 16:40:37 -06:00
clock24xx.h
OMAP2 clock: 2430 I2CHS uses non-standard CM_IDLEST register
2009-07-24 20:10:36 -06:00
clock34xx.c
omap: Lock DPLL5 at boot
2009-10-05 13:31:44 -07:00
clock34xx.h
OMAP3 clock: remove superfluous calls to omap2_init_clk_clkdm
2009-09-03 20:14:00 +03:00
clock.c
OMAP: PM: Hook into PM counters
2009-09-02 15:08:23 -07:00
clock.h
OMAP2/3 clock: split, rename omap2_wait_clock_ready()
2009-07-24 20:10:35 -06:00
clockdomain.c
OMAP: Fix race condition with autodeps
2009-10-14 16:40:37 -06:00
clockdomains.h
OMAP3: PM: D2D clockdomain supports SW supervised transitions
2009-05-28 10:59:08 -07:00
cm4xxx.c
omap: Fix 44xx compile
2009-09-24 16:23:07 -07:00
cm-regbits-24xx.h
cm-regbits-34xx.h
OMAP3: PM: Add D2D clocks and auto-idle setup to PRCM init
2009-05-28 10:59:07 -07:00
cm.c
OMAP2/3/4 PRCM: add module IDLEST wait code
2009-09-03 20:14:02 +03:00
cm.h
OMAP2/3/4 PRCM: add module IDLEST wait code
2009-09-03 20:14:02 +03:00
control.c
devices.c
omap: Fix mcspi compile for 2420
2009-09-24 16:23:05 -07:00
gpmc-onenand.c
OMAP2/3: gpmc-onenand: correct use of async timings
2009-06-23 13:30:24 +03:00
gpmc-smc91x.c
ARM: OMAP2/3: Add generic smc91x support when connected to GPMC
2009-05-28 13:23:52 -07:00
gpmc.c
omap: Use resource_size
2009-11-10 18:55:19 -08:00
id.c
OMAP2/3: Add omap_type() for determining GP/EMU/HS
2009-06-23 13:30:23 +03:00
io.c
omap4: Allow omap_serial_early_init() for OMAP4430 board
2009-10-22 15:41:16 -07:00
iommu2.c
omap: Fix wrong condition check in while loop for mailbox and iommu2
2009-09-28 09:21:26 -07:00
irq.c
Kconfig
omap2: Fix detection of n8x0
2009-10-22 14:48:13 -07:00
mailbox.c
omap: Use resource_size
2009-11-10 18:55:19 -08:00
Makefile
OMAP2/3/4: create omap_hwmod layer
2009-09-03 20:14:03 +03:00
Makefile.boot
mcbsp.c
Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
2009-09-14 17:48:14 -07:00
mmc-twl4030.c
ARM: OMAP: mmc-twl4030: add regulator sleep / wake function
2009-09-23 07:39:35 -07:00
mmc-twl4030.h
omap_hsmmc: support for deeper power saving states
2009-09-23 07:39:35 -07:00
mux.c
omap: Fix MMC gpio_wp for BeagleBoard C2 and above
2009-09-24 16:23:17 -07:00
omap3-iommu.c
omap_hwmod_34xx.h
OMAP: omap_hwmod: call omap_hwmod init at boot; create interconnects
2009-09-03 20:14:05 +03:00
omap_hwmod_2420.h
OMAP: omap_hwmod: call omap_hwmod init at boot; create interconnects
2009-09-03 20:14:05 +03:00
omap_hwmod_2430.h
OMAP: omap_hwmod: call omap_hwmod init at boot; create interconnects
2009-09-03 20:14:05 +03:00
omap_hwmod.c
OMAP: omap_hwmod: call omap_hwmod init at boot; create interconnects
2009-09-03 20:14:05 +03:00
omap-headsmp.S
ARM: OMAP4: SMP: Add OMAP4430 SMP board files
2009-06-09 13:03:50 +05:30
omap-smp.c
OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead
2009-08-28 10:50:33 -07:00
pm24xx.c
OMAP: PM: Add closures to clkdm_for_each and pwrdm_for_each.
2009-09-02 15:08:23 -07:00
pm34xx.c
omap3: PM: enable UART3 module wakeups
2009-10-22 15:41:16 -07:00
pm-debug.c
OMAP3: PM: introduce a new powerdomain walk helper
2009-10-05 10:51:00 -07:00
pm.h
OMAP: PM: Added suspend target state control to debugfs for OMAP3
2009-09-02 15:08:25 -07:00
powerdomain.c
OMAP3: PM: introduce a new powerdomain walk helper
2009-10-05 10:51:00 -07:00
powerdomains24xx.h
powerdomains34xx.h
powerdomains.h
prcm-common.h
prcm.c
OMAP2/3 clock: split, rename omap2_wait_clock_ready()
2009-07-24 20:10:35 -06:00
prm-regbits-24xx.h
prm-regbits-34xx.h
prm.h
OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead
2009-08-28 10:50:33 -07:00
sdram-micron-mt46h32m32lf-6.h
ARM: OMAP3: SDRC: add timing data for Micron MT46H32M32LF-6, v2
2009-05-28 14:03:59 -07:00
sdram-qimonda-hyb18m512160af-6.h
ARM: OMAP3: SDRC: add timing data for Qimonda HYB18M512160AF-6
2009-05-28 14:03:59 -07:00
sdrc2xxx.c
sdrc.c
OMAP2/3 SDRC: don't set SDRC_POWER.PWDENA on boot
2009-07-24 19:44:01 -06:00
sdrc.h
OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead
2009-08-28 10:50:33 -07:00
serial.c
omap4: Fix UART4 platform data on omap4
2009-10-22 15:41:16 -07:00
sleep24xx.S
sleep34xx.S
sram34xx.S
OMAP3 SDRC: Move the clk stabilization delay to the right place
2009-07-24 20:10:35 -06:00
sram242x.S
OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead
2009-08-28 10:50:33 -07:00
sram243x.S
OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead
2009-08-28 10:50:33 -07:00
timer-gp.c
OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead
2009-08-28 10:50:33 -07:00
timer-mpu.c
ARM: OMAP4: SMP: Add mpu timer support for OMAP4430
2009-06-09 13:03:59 +05:30
usb-musb.c
MUSB: Remove usb_musb_pm_init() call
2009-09-02 15:07:56 -07:00
usb-tusb6010.c