2a49128f0a
The driver sets up the hardware to accept a frame with max length equal to MTU + Ethernet header + FCS + VLAN tag, but we neglect to add the VLAN tag size to the ingress buffer. When a VLAN-tagged frame arrives, the hardware passes it, but bad things happen because the buffer is too small. This patch fixes that. Thanks to David Harris for reporting the bug and testing the fix. Tested-by: David Harris <david.harris@cpni-inc.com> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2454 lines
68 KiB
C
2454 lines
68 KiB
C
/*
|
|
* Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
|
|
* Copyright(c) 2006 Chris Snook <csnook@redhat.com>
|
|
* Copyright(c) 2006 Jay Cliburn <jcliburn@gmail.com>
|
|
*
|
|
* Derived from Intel e1000 driver
|
|
* Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the Free
|
|
* Software Foundation; either version 2 of the License, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program; if not, write to the Free Software Foundation, Inc., 59
|
|
* Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
*
|
|
* The full GNU General Public License is included in this distribution in the
|
|
* file called COPYING.
|
|
*
|
|
* Contact Information:
|
|
* Xiong Huang <xiong_huang@attansic.com>
|
|
* Attansic Technology Corp. 3F 147, Xianzheng 9th Road, Zhubei,
|
|
* Xinzhu 302, TAIWAN, REPUBLIC OF CHINA
|
|
*
|
|
* Chris Snook <csnook@redhat.com>
|
|
* Jay Cliburn <jcliburn@gmail.com>
|
|
*
|
|
* This version is adapted from the Attansic reference driver for
|
|
* inclusion in the Linux kernel. It is currently under heavy development.
|
|
* A very incomplete list of things that need to be dealt with:
|
|
*
|
|
* TODO:
|
|
* Fix TSO; tx performance is horrible with TSO enabled.
|
|
* Wake on LAN.
|
|
* Add more ethtool functions.
|
|
* Fix abstruse irq enable/disable condition described here:
|
|
* http://marc.theaimsgroup.com/?l=linux-netdev&m=116398508500553&w=2
|
|
*
|
|
* NEEDS TESTING:
|
|
* VLAN
|
|
* multicast
|
|
* promiscuous mode
|
|
* interrupt coalescing
|
|
* SMP torture testing
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/string.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/if_vlan.h>
|
|
#include <linux/if_ether.h>
|
|
#include <linux/irqreturn.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/hardirq.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irqflags.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/net.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/in.h>
|
|
#include <linux/ip.h>
|
|
#include <linux/tcp.h>
|
|
#include <linux/compiler.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/mii.h>
|
|
#include <net/checksum.h>
|
|
|
|
#include <asm/atomic.h>
|
|
#include <asm/byteorder.h>
|
|
|
|
#include "atl1.h"
|
|
|
|
#define DRIVER_VERSION "2.0.7"
|
|
|
|
char atl1_driver_name[] = "atl1";
|
|
static const char atl1_driver_string[] = "Attansic L1 Ethernet Network Driver";
|
|
static const char atl1_copyright[] = "Copyright(c) 2005-2006 Attansic Corporation.";
|
|
char atl1_driver_version[] = DRIVER_VERSION;
|
|
|
|
MODULE_AUTHOR
|
|
("Attansic Corporation <xiong_huang@attansic.com>, Chris Snook <csnook@redhat.com>, Jay Cliburn <jcliburn@gmail.com>");
|
|
MODULE_DESCRIPTION("Attansic 1000M Ethernet Network Driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION(DRIVER_VERSION);
|
|
|
|
/*
|
|
* atl1_pci_tbl - PCI Device ID Table
|
|
*/
|
|
static const struct pci_device_id atl1_pci_tbl[] = {
|
|
{PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1)},
|
|
/* required last entry */
|
|
{0,}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, atl1_pci_tbl);
|
|
|
|
/*
|
|
* atl1_sw_init - Initialize general software structures (struct atl1_adapter)
|
|
* @adapter: board private structure to initialize
|
|
*
|
|
* atl1_sw_init initializes the Adapter private data structure.
|
|
* Fields are initialized based on PCI device information and
|
|
* OS network device settings (MTU size).
|
|
*/
|
|
static int __devinit atl1_sw_init(struct atl1_adapter *adapter)
|
|
{
|
|
struct atl1_hw *hw = &adapter->hw;
|
|
struct net_device *netdev = adapter->netdev;
|
|
|
|
hw->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
|
|
hw->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
|
|
|
|
adapter->wol = 0;
|
|
adapter->rx_buffer_len = (hw->max_frame_size + 7) & ~7;
|
|
adapter->ict = 50000; /* 100ms */
|
|
adapter->link_speed = SPEED_0; /* hardware init */
|
|
adapter->link_duplex = FULL_DUPLEX;
|
|
|
|
hw->phy_configured = false;
|
|
hw->preamble_len = 7;
|
|
hw->ipgt = 0x60;
|
|
hw->min_ifg = 0x50;
|
|
hw->ipgr1 = 0x40;
|
|
hw->ipgr2 = 0x60;
|
|
hw->max_retry = 0xf;
|
|
hw->lcol = 0x37;
|
|
hw->jam_ipg = 7;
|
|
hw->rfd_burst = 8;
|
|
hw->rrd_burst = 8;
|
|
hw->rfd_fetch_gap = 1;
|
|
hw->rx_jumbo_th = adapter->rx_buffer_len / 8;
|
|
hw->rx_jumbo_lkah = 1;
|
|
hw->rrd_ret_timer = 16;
|
|
hw->tpd_burst = 4;
|
|
hw->tpd_fetch_th = 16;
|
|
hw->txf_burst = 0x100;
|
|
hw->tx_jumbo_task_th = (hw->max_frame_size + 7) >> 3;
|
|
hw->tpd_fetch_gap = 1;
|
|
hw->rcb_value = atl1_rcb_64;
|
|
hw->dma_ord = atl1_dma_ord_enh;
|
|
hw->dmar_block = atl1_dma_req_256;
|
|
hw->dmaw_block = atl1_dma_req_256;
|
|
hw->cmb_rrd = 4;
|
|
hw->cmb_tpd = 4;
|
|
hw->cmb_rx_timer = 1; /* about 2us */
|
|
hw->cmb_tx_timer = 1; /* about 2us */
|
|
hw->smb_timer = 100000; /* about 200ms */
|
|
|
|
spin_lock_init(&adapter->lock);
|
|
spin_lock_init(&adapter->mb_lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mdio_read(struct net_device *netdev, int phy_id, int reg_num)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
u16 result;
|
|
|
|
atl1_read_phy_reg(&adapter->hw, reg_num & 0x1f, &result);
|
|
|
|
return result;
|
|
}
|
|
|
|
static void mdio_write(struct net_device *netdev, int phy_id, int reg_num,
|
|
int val)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
|
|
atl1_write_phy_reg(&adapter->hw, reg_num, val);
|
|
}
|
|
|
|
/*
|
|
* atl1_mii_ioctl -
|
|
* @netdev:
|
|
* @ifreq:
|
|
* @cmd:
|
|
*/
|
|
static int atl1_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
unsigned long flags;
|
|
int retval;
|
|
|
|
if (!netif_running(netdev))
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&adapter->lock, flags);
|
|
retval = generic_mii_ioctl(&adapter->mii, if_mii(ifr), cmd, NULL);
|
|
spin_unlock_irqrestore(&adapter->lock, flags);
|
|
|
|
return retval;
|
|
}
|
|
|
|
/*
|
|
* atl1_ioctl -
|
|
* @netdev:
|
|
* @ifreq:
|
|
* @cmd:
|
|
*/
|
|
static int atl1_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
|
|
{
|
|
switch (cmd) {
|
|
case SIOCGMIIPHY:
|
|
case SIOCGMIIREG:
|
|
case SIOCSMIIREG:
|
|
return atl1_mii_ioctl(netdev, ifr, cmd);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* atl1_setup_mem_resources - allocate Tx / RX descriptor resources
|
|
* @adapter: board private structure
|
|
*
|
|
* Return 0 on success, negative on failure
|
|
*/
|
|
s32 atl1_setup_ring_resources(struct atl1_adapter *adapter)
|
|
{
|
|
struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
|
|
struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
|
|
struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring;
|
|
struct atl1_ring_header *ring_header = &adapter->ring_header;
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
int size;
|
|
u8 offset = 0;
|
|
|
|
size = sizeof(struct atl1_buffer) * (tpd_ring->count + rfd_ring->count);
|
|
tpd_ring->buffer_info = kzalloc(size, GFP_KERNEL);
|
|
if (unlikely(!tpd_ring->buffer_info)) {
|
|
dev_err(&pdev->dev, "kzalloc failed , size = D%d\n", size);
|
|
goto err_nomem;
|
|
}
|
|
rfd_ring->buffer_info =
|
|
(struct atl1_buffer *)(tpd_ring->buffer_info + tpd_ring->count);
|
|
|
|
/* real ring DMA buffer
|
|
* each ring/block may need up to 8 bytes for alignment, hence the
|
|
* additional 40 bytes tacked onto the end.
|
|
*/
|
|
ring_header->size = size =
|
|
sizeof(struct tx_packet_desc) * tpd_ring->count
|
|
+ sizeof(struct rx_free_desc) * rfd_ring->count
|
|
+ sizeof(struct rx_return_desc) * rrd_ring->count
|
|
+ sizeof(struct coals_msg_block)
|
|
+ sizeof(struct stats_msg_block)
|
|
+ 40;
|
|
|
|
ring_header->desc = pci_alloc_consistent(pdev, ring_header->size,
|
|
&ring_header->dma);
|
|
if (unlikely(!ring_header->desc)) {
|
|
dev_err(&pdev->dev, "pci_alloc_consistent failed\n");
|
|
goto err_nomem;
|
|
}
|
|
|
|
memset(ring_header->desc, 0, ring_header->size);
|
|
|
|
/* init TPD ring */
|
|
tpd_ring->dma = ring_header->dma;
|
|
offset = (tpd_ring->dma & 0x7) ? (8 - (ring_header->dma & 0x7)) : 0;
|
|
tpd_ring->dma += offset;
|
|
tpd_ring->desc = (u8 *) ring_header->desc + offset;
|
|
tpd_ring->size = sizeof(struct tx_packet_desc) * tpd_ring->count;
|
|
|
|
/* init RFD ring */
|
|
rfd_ring->dma = tpd_ring->dma + tpd_ring->size;
|
|
offset = (rfd_ring->dma & 0x7) ? (8 - (rfd_ring->dma & 0x7)) : 0;
|
|
rfd_ring->dma += offset;
|
|
rfd_ring->desc = (u8 *) tpd_ring->desc + (tpd_ring->size + offset);
|
|
rfd_ring->size = sizeof(struct rx_free_desc) * rfd_ring->count;
|
|
|
|
|
|
/* init RRD ring */
|
|
rrd_ring->dma = rfd_ring->dma + rfd_ring->size;
|
|
offset = (rrd_ring->dma & 0x7) ? (8 - (rrd_ring->dma & 0x7)) : 0;
|
|
rrd_ring->dma += offset;
|
|
rrd_ring->desc = (u8 *) rfd_ring->desc + (rfd_ring->size + offset);
|
|
rrd_ring->size = sizeof(struct rx_return_desc) * rrd_ring->count;
|
|
|
|
|
|
/* init CMB */
|
|
adapter->cmb.dma = rrd_ring->dma + rrd_ring->size;
|
|
offset = (adapter->cmb.dma & 0x7) ? (8 - (adapter->cmb.dma & 0x7)) : 0;
|
|
adapter->cmb.dma += offset;
|
|
adapter->cmb.cmb = (struct coals_msg_block *)
|
|
((u8 *) rrd_ring->desc + (rrd_ring->size + offset));
|
|
|
|
/* init SMB */
|
|
adapter->smb.dma = adapter->cmb.dma + sizeof(struct coals_msg_block);
|
|
offset = (adapter->smb.dma & 0x7) ? (8 - (adapter->smb.dma & 0x7)) : 0;
|
|
adapter->smb.dma += offset;
|
|
adapter->smb.smb = (struct stats_msg_block *)
|
|
((u8 *) adapter->cmb.cmb +
|
|
(sizeof(struct coals_msg_block) + offset));
|
|
|
|
return ATL1_SUCCESS;
|
|
|
|
err_nomem:
|
|
kfree(tpd_ring->buffer_info);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void atl1_init_ring_ptrs(struct atl1_adapter *adapter)
|
|
{
|
|
struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
|
|
struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
|
|
struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring;
|
|
|
|
atomic_set(&tpd_ring->next_to_use, 0);
|
|
atomic_set(&tpd_ring->next_to_clean, 0);
|
|
|
|
rfd_ring->next_to_clean = 0;
|
|
atomic_set(&rfd_ring->next_to_use, 0);
|
|
|
|
rrd_ring->next_to_use = 0;
|
|
atomic_set(&rrd_ring->next_to_clean, 0);
|
|
}
|
|
|
|
/*
|
|
* atl1_clean_rx_ring - Free RFD Buffers
|
|
* @adapter: board private structure
|
|
*/
|
|
static void atl1_clean_rx_ring(struct atl1_adapter *adapter)
|
|
{
|
|
struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
|
|
struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring;
|
|
struct atl1_buffer *buffer_info;
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
unsigned long size;
|
|
unsigned int i;
|
|
|
|
/* Free all the Rx ring sk_buffs */
|
|
for (i = 0; i < rfd_ring->count; i++) {
|
|
buffer_info = &rfd_ring->buffer_info[i];
|
|
if (buffer_info->dma) {
|
|
pci_unmap_page(pdev, buffer_info->dma,
|
|
buffer_info->length, PCI_DMA_FROMDEVICE);
|
|
buffer_info->dma = 0;
|
|
}
|
|
if (buffer_info->skb) {
|
|
dev_kfree_skb(buffer_info->skb);
|
|
buffer_info->skb = NULL;
|
|
}
|
|
}
|
|
|
|
size = sizeof(struct atl1_buffer) * rfd_ring->count;
|
|
memset(rfd_ring->buffer_info, 0, size);
|
|
|
|
/* Zero out the descriptor ring */
|
|
memset(rfd_ring->desc, 0, rfd_ring->size);
|
|
|
|
rfd_ring->next_to_clean = 0;
|
|
atomic_set(&rfd_ring->next_to_use, 0);
|
|
|
|
rrd_ring->next_to_use = 0;
|
|
atomic_set(&rrd_ring->next_to_clean, 0);
|
|
}
|
|
|
|
/*
|
|
* atl1_clean_tx_ring - Free Tx Buffers
|
|
* @adapter: board private structure
|
|
*/
|
|
static void atl1_clean_tx_ring(struct atl1_adapter *adapter)
|
|
{
|
|
struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
|
|
struct atl1_buffer *buffer_info;
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
unsigned long size;
|
|
unsigned int i;
|
|
|
|
/* Free all the Tx ring sk_buffs */
|
|
for (i = 0; i < tpd_ring->count; i++) {
|
|
buffer_info = &tpd_ring->buffer_info[i];
|
|
if (buffer_info->dma) {
|
|
pci_unmap_page(pdev, buffer_info->dma,
|
|
buffer_info->length, PCI_DMA_TODEVICE);
|
|
buffer_info->dma = 0;
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < tpd_ring->count; i++) {
|
|
buffer_info = &tpd_ring->buffer_info[i];
|
|
if (buffer_info->skb) {
|
|
dev_kfree_skb_any(buffer_info->skb);
|
|
buffer_info->skb = NULL;
|
|
}
|
|
}
|
|
|
|
size = sizeof(struct atl1_buffer) * tpd_ring->count;
|
|
memset(tpd_ring->buffer_info, 0, size);
|
|
|
|
/* Zero out the descriptor ring */
|
|
memset(tpd_ring->desc, 0, tpd_ring->size);
|
|
|
|
atomic_set(&tpd_ring->next_to_use, 0);
|
|
atomic_set(&tpd_ring->next_to_clean, 0);
|
|
}
|
|
|
|
/*
|
|
* atl1_free_ring_resources - Free Tx / RX descriptor Resources
|
|
* @adapter: board private structure
|
|
*
|
|
* Free all transmit software resources
|
|
*/
|
|
void atl1_free_ring_resources(struct atl1_adapter *adapter)
|
|
{
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
|
|
struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
|
|
struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring;
|
|
struct atl1_ring_header *ring_header = &adapter->ring_header;
|
|
|
|
atl1_clean_tx_ring(adapter);
|
|
atl1_clean_rx_ring(adapter);
|
|
|
|
kfree(tpd_ring->buffer_info);
|
|
pci_free_consistent(pdev, ring_header->size, ring_header->desc,
|
|
ring_header->dma);
|
|
|
|
tpd_ring->buffer_info = NULL;
|
|
tpd_ring->desc = NULL;
|
|
tpd_ring->dma = 0;
|
|
|
|
rfd_ring->buffer_info = NULL;
|
|
rfd_ring->desc = NULL;
|
|
rfd_ring->dma = 0;
|
|
|
|
rrd_ring->desc = NULL;
|
|
rrd_ring->dma = 0;
|
|
}
|
|
|
|
static void atl1_setup_mac_ctrl(struct atl1_adapter *adapter)
|
|
{
|
|
u32 value;
|
|
struct atl1_hw *hw = &adapter->hw;
|
|
struct net_device *netdev = adapter->netdev;
|
|
/* Config MAC CTRL Register */
|
|
value = MAC_CTRL_TX_EN | MAC_CTRL_RX_EN;
|
|
/* duplex */
|
|
if (FULL_DUPLEX == adapter->link_duplex)
|
|
value |= MAC_CTRL_DUPLX;
|
|
/* speed */
|
|
value |= ((u32) ((SPEED_1000 == adapter->link_speed) ?
|
|
MAC_CTRL_SPEED_1000 : MAC_CTRL_SPEED_10_100) <<
|
|
MAC_CTRL_SPEED_SHIFT);
|
|
/* flow control */
|
|
value |= (MAC_CTRL_TX_FLOW | MAC_CTRL_RX_FLOW);
|
|
/* PAD & CRC */
|
|
value |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD);
|
|
/* preamble length */
|
|
value |= (((u32) adapter->hw.preamble_len
|
|
& MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT);
|
|
/* vlan */
|
|
if (adapter->vlgrp)
|
|
value |= MAC_CTRL_RMV_VLAN;
|
|
/* rx checksum
|
|
if (adapter->rx_csum)
|
|
value |= MAC_CTRL_RX_CHKSUM_EN;
|
|
*/
|
|
/* filter mode */
|
|
value |= MAC_CTRL_BC_EN;
|
|
if (netdev->flags & IFF_PROMISC)
|
|
value |= MAC_CTRL_PROMIS_EN;
|
|
else if (netdev->flags & IFF_ALLMULTI)
|
|
value |= MAC_CTRL_MC_ALL_EN;
|
|
/* value |= MAC_CTRL_LOOPBACK; */
|
|
iowrite32(value, hw->hw_addr + REG_MAC_CTRL);
|
|
}
|
|
|
|
/*
|
|
* atl1_set_mac - Change the Ethernet Address of the NIC
|
|
* @netdev: network interface device structure
|
|
* @p: pointer to an address structure
|
|
*
|
|
* Returns 0 on success, negative on failure
|
|
*/
|
|
static int atl1_set_mac(struct net_device *netdev, void *p)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
struct sockaddr *addr = p;
|
|
|
|
if (netif_running(netdev))
|
|
return -EBUSY;
|
|
|
|
if (!is_valid_ether_addr(addr->sa_data))
|
|
return -EADDRNOTAVAIL;
|
|
|
|
memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
|
|
memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len);
|
|
|
|
atl1_set_mac_addr(&adapter->hw);
|
|
return 0;
|
|
}
|
|
|
|
static u32 atl1_check_link(struct atl1_adapter *adapter)
|
|
{
|
|
struct atl1_hw *hw = &adapter->hw;
|
|
struct net_device *netdev = adapter->netdev;
|
|
u32 ret_val;
|
|
u16 speed, duplex, phy_data;
|
|
int reconfig = 0;
|
|
|
|
/* MII_BMSR must read twice */
|
|
atl1_read_phy_reg(hw, MII_BMSR, &phy_data);
|
|
atl1_read_phy_reg(hw, MII_BMSR, &phy_data);
|
|
if (!(phy_data & BMSR_LSTATUS)) { /* link down */
|
|
if (netif_carrier_ok(netdev)) { /* old link state: Up */
|
|
dev_info(&adapter->pdev->dev, "link is down\n");
|
|
adapter->link_speed = SPEED_0;
|
|
netif_carrier_off(netdev);
|
|
netif_stop_queue(netdev);
|
|
}
|
|
return ATL1_SUCCESS;
|
|
}
|
|
|
|
/* Link Up */
|
|
ret_val = atl1_get_speed_and_duplex(hw, &speed, &duplex);
|
|
if (ret_val)
|
|
return ret_val;
|
|
|
|
switch (hw->media_type) {
|
|
case MEDIA_TYPE_1000M_FULL:
|
|
if (speed != SPEED_1000 || duplex != FULL_DUPLEX)
|
|
reconfig = 1;
|
|
break;
|
|
case MEDIA_TYPE_100M_FULL:
|
|
if (speed != SPEED_100 || duplex != FULL_DUPLEX)
|
|
reconfig = 1;
|
|
break;
|
|
case MEDIA_TYPE_100M_HALF:
|
|
if (speed != SPEED_100 || duplex != HALF_DUPLEX)
|
|
reconfig = 1;
|
|
break;
|
|
case MEDIA_TYPE_10M_FULL:
|
|
if (speed != SPEED_10 || duplex != FULL_DUPLEX)
|
|
reconfig = 1;
|
|
break;
|
|
case MEDIA_TYPE_10M_HALF:
|
|
if (speed != SPEED_10 || duplex != HALF_DUPLEX)
|
|
reconfig = 1;
|
|
break;
|
|
}
|
|
|
|
/* link result is our setting */
|
|
if (!reconfig) {
|
|
if (adapter->link_speed != speed
|
|
|| adapter->link_duplex != duplex) {
|
|
adapter->link_speed = speed;
|
|
adapter->link_duplex = duplex;
|
|
atl1_setup_mac_ctrl(adapter);
|
|
dev_info(&adapter->pdev->dev,
|
|
"%s link is up %d Mbps %s\n",
|
|
netdev->name, adapter->link_speed,
|
|
adapter->link_duplex == FULL_DUPLEX ?
|
|
"full duplex" : "half duplex");
|
|
}
|
|
if (!netif_carrier_ok(netdev)) { /* Link down -> Up */
|
|
netif_carrier_on(netdev);
|
|
netif_wake_queue(netdev);
|
|
}
|
|
return ATL1_SUCCESS;
|
|
}
|
|
|
|
/* change orignal link status */
|
|
if (netif_carrier_ok(netdev)) {
|
|
adapter->link_speed = SPEED_0;
|
|
netif_carrier_off(netdev);
|
|
netif_stop_queue(netdev);
|
|
}
|
|
|
|
if (hw->media_type != MEDIA_TYPE_AUTO_SENSOR &&
|
|
hw->media_type != MEDIA_TYPE_1000M_FULL) {
|
|
switch (hw->media_type) {
|
|
case MEDIA_TYPE_100M_FULL:
|
|
phy_data = MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 |
|
|
MII_CR_RESET;
|
|
break;
|
|
case MEDIA_TYPE_100M_HALF:
|
|
phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
|
|
break;
|
|
case MEDIA_TYPE_10M_FULL:
|
|
phy_data =
|
|
MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET;
|
|
break;
|
|
default: /* MEDIA_TYPE_10M_HALF: */
|
|
phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
|
|
break;
|
|
}
|
|
atl1_write_phy_reg(hw, MII_BMCR, phy_data);
|
|
return ATL1_SUCCESS;
|
|
}
|
|
|
|
/* auto-neg, insert timer to re-config phy */
|
|
if (!adapter->phy_timer_pending) {
|
|
adapter->phy_timer_pending = true;
|
|
mod_timer(&adapter->phy_config_timer, jiffies + 3 * HZ);
|
|
}
|
|
|
|
return ATL1_SUCCESS;
|
|
}
|
|
|
|
static void atl1_check_for_link(struct atl1_adapter *adapter)
|
|
{
|
|
struct net_device *netdev = adapter->netdev;
|
|
u16 phy_data = 0;
|
|
|
|
spin_lock(&adapter->lock);
|
|
adapter->phy_timer_pending = false;
|
|
atl1_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
|
|
atl1_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
|
|
spin_unlock(&adapter->lock);
|
|
|
|
/* notify upper layer link down ASAP */
|
|
if (!(phy_data & BMSR_LSTATUS)) { /* Link Down */
|
|
if (netif_carrier_ok(netdev)) { /* old link state: Up */
|
|
dev_info(&adapter->pdev->dev, "%s link is down\n",
|
|
netdev->name);
|
|
adapter->link_speed = SPEED_0;
|
|
netif_carrier_off(netdev);
|
|
netif_stop_queue(netdev);
|
|
}
|
|
}
|
|
schedule_work(&adapter->link_chg_task);
|
|
}
|
|
|
|
/*
|
|
* atl1_set_multi - Multicast and Promiscuous mode set
|
|
* @netdev: network interface device structure
|
|
*
|
|
* The set_multi entry point is called whenever the multicast address
|
|
* list or the network interface flags are updated. This routine is
|
|
* responsible for configuring the hardware for proper multicast,
|
|
* promiscuous mode, and all-multi behavior.
|
|
*/
|
|
static void atl1_set_multi(struct net_device *netdev)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
struct atl1_hw *hw = &adapter->hw;
|
|
struct dev_mc_list *mc_ptr;
|
|
u32 rctl;
|
|
u32 hash_value;
|
|
|
|
/* Check for Promiscuous and All Multicast modes */
|
|
rctl = ioread32(hw->hw_addr + REG_MAC_CTRL);
|
|
if (netdev->flags & IFF_PROMISC)
|
|
rctl |= MAC_CTRL_PROMIS_EN;
|
|
else if (netdev->flags & IFF_ALLMULTI) {
|
|
rctl |= MAC_CTRL_MC_ALL_EN;
|
|
rctl &= ~MAC_CTRL_PROMIS_EN;
|
|
} else
|
|
rctl &= ~(MAC_CTRL_PROMIS_EN | MAC_CTRL_MC_ALL_EN);
|
|
|
|
iowrite32(rctl, hw->hw_addr + REG_MAC_CTRL);
|
|
|
|
/* clear the old settings from the multicast hash table */
|
|
iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE);
|
|
iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2));
|
|
|
|
/* compute mc addresses' hash value ,and put it into hash table */
|
|
for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) {
|
|
hash_value = atl1_hash_mc_addr(hw, mc_ptr->dmi_addr);
|
|
atl1_hash_set(hw, hash_value);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* atl1_change_mtu - Change the Maximum Transfer Unit
|
|
* @netdev: network interface device structure
|
|
* @new_mtu: new value for maximum frame size
|
|
*
|
|
* Returns 0 on success, negative on failure
|
|
*/
|
|
static int atl1_change_mtu(struct net_device *netdev, int new_mtu)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
int old_mtu = netdev->mtu;
|
|
int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
|
|
|
|
if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
|
|
(max_frame > MAX_JUMBO_FRAME_SIZE)) {
|
|
dev_warn(&adapter->pdev->dev, "invalid MTU setting\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
adapter->hw.max_frame_size = max_frame;
|
|
adapter->hw.tx_jumbo_task_th = (max_frame + 7) >> 3;
|
|
adapter->rx_buffer_len = (max_frame + 7) & ~7;
|
|
adapter->hw.rx_jumbo_th = adapter->rx_buffer_len / 8;
|
|
|
|
netdev->mtu = new_mtu;
|
|
if ((old_mtu != new_mtu) && netif_running(netdev)) {
|
|
atl1_down(adapter);
|
|
atl1_up(adapter);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void set_flow_ctrl_old(struct atl1_adapter *adapter)
|
|
{
|
|
u32 hi, lo, value;
|
|
|
|
/* RFD Flow Control */
|
|
value = adapter->rfd_ring.count;
|
|
hi = value / 16;
|
|
if (hi < 2)
|
|
hi = 2;
|
|
lo = value * 7 / 8;
|
|
|
|
value = ((hi & RXQ_RXF_PAUSE_TH_HI_MASK) << RXQ_RXF_PAUSE_TH_HI_SHIFT) |
|
|
((lo & RXQ_RXF_PAUSE_TH_LO_MASK) << RXQ_RXF_PAUSE_TH_LO_SHIFT);
|
|
iowrite32(value, adapter->hw.hw_addr + REG_RXQ_RXF_PAUSE_THRESH);
|
|
|
|
/* RRD Flow Control */
|
|
value = adapter->rrd_ring.count;
|
|
lo = value / 16;
|
|
hi = value * 7 / 8;
|
|
if (lo < 2)
|
|
lo = 2;
|
|
value = ((hi & RXQ_RRD_PAUSE_TH_HI_MASK) << RXQ_RRD_PAUSE_TH_HI_SHIFT) |
|
|
((lo & RXQ_RRD_PAUSE_TH_LO_MASK) << RXQ_RRD_PAUSE_TH_LO_SHIFT);
|
|
iowrite32(value, adapter->hw.hw_addr + REG_RXQ_RRD_PAUSE_THRESH);
|
|
}
|
|
|
|
static void set_flow_ctrl_new(struct atl1_hw *hw)
|
|
{
|
|
u32 hi, lo, value;
|
|
|
|
/* RXF Flow Control */
|
|
value = ioread32(hw->hw_addr + REG_SRAM_RXF_LEN);
|
|
lo = value / 16;
|
|
if (lo < 192)
|
|
lo = 192;
|
|
hi = value * 7 / 8;
|
|
if (hi < lo)
|
|
hi = lo + 16;
|
|
value = ((hi & RXQ_RXF_PAUSE_TH_HI_MASK) << RXQ_RXF_PAUSE_TH_HI_SHIFT) |
|
|
((lo & RXQ_RXF_PAUSE_TH_LO_MASK) << RXQ_RXF_PAUSE_TH_LO_SHIFT);
|
|
iowrite32(value, hw->hw_addr + REG_RXQ_RXF_PAUSE_THRESH);
|
|
|
|
/* RRD Flow Control */
|
|
value = ioread32(hw->hw_addr + REG_SRAM_RRD_LEN);
|
|
lo = value / 8;
|
|
hi = value * 7 / 8;
|
|
if (lo < 2)
|
|
lo = 2;
|
|
if (hi < lo)
|
|
hi = lo + 3;
|
|
value = ((hi & RXQ_RRD_PAUSE_TH_HI_MASK) << RXQ_RRD_PAUSE_TH_HI_SHIFT) |
|
|
((lo & RXQ_RRD_PAUSE_TH_LO_MASK) << RXQ_RRD_PAUSE_TH_LO_SHIFT);
|
|
iowrite32(value, hw->hw_addr + REG_RXQ_RRD_PAUSE_THRESH);
|
|
}
|
|
|
|
/*
|
|
* atl1_configure - Configure Transmit&Receive Unit after Reset
|
|
* @adapter: board private structure
|
|
*
|
|
* Configure the Tx /Rx unit of the MAC after a reset.
|
|
*/
|
|
static u32 atl1_configure(struct atl1_adapter *adapter)
|
|
{
|
|
struct atl1_hw *hw = &adapter->hw;
|
|
u32 value;
|
|
|
|
/* clear interrupt status */
|
|
iowrite32(0xffffffff, adapter->hw.hw_addr + REG_ISR);
|
|
|
|
/* set MAC Address */
|
|
value = (((u32) hw->mac_addr[2]) << 24) |
|
|
(((u32) hw->mac_addr[3]) << 16) |
|
|
(((u32) hw->mac_addr[4]) << 8) |
|
|
(((u32) hw->mac_addr[5]));
|
|
iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR);
|
|
value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1]));
|
|
iowrite32(value, hw->hw_addr + (REG_MAC_STA_ADDR + 4));
|
|
|
|
/* tx / rx ring */
|
|
|
|
/* HI base address */
|
|
iowrite32((u32) ((adapter->tpd_ring.dma & 0xffffffff00000000ULL) >> 32),
|
|
hw->hw_addr + REG_DESC_BASE_ADDR_HI);
|
|
/* LO base address */
|
|
iowrite32((u32) (adapter->rfd_ring.dma & 0x00000000ffffffffULL),
|
|
hw->hw_addr + REG_DESC_RFD_ADDR_LO);
|
|
iowrite32((u32) (adapter->rrd_ring.dma & 0x00000000ffffffffULL),
|
|
hw->hw_addr + REG_DESC_RRD_ADDR_LO);
|
|
iowrite32((u32) (adapter->tpd_ring.dma & 0x00000000ffffffffULL),
|
|
hw->hw_addr + REG_DESC_TPD_ADDR_LO);
|
|
iowrite32((u32) (adapter->cmb.dma & 0x00000000ffffffffULL),
|
|
hw->hw_addr + REG_DESC_CMB_ADDR_LO);
|
|
iowrite32((u32) (adapter->smb.dma & 0x00000000ffffffffULL),
|
|
hw->hw_addr + REG_DESC_SMB_ADDR_LO);
|
|
|
|
/* element count */
|
|
value = adapter->rrd_ring.count;
|
|
value <<= 16;
|
|
value += adapter->rfd_ring.count;
|
|
iowrite32(value, hw->hw_addr + REG_DESC_RFD_RRD_RING_SIZE);
|
|
iowrite32(adapter->tpd_ring.count, hw->hw_addr +
|
|
REG_DESC_TPD_RING_SIZE);
|
|
|
|
/* Load Ptr */
|
|
iowrite32(1, hw->hw_addr + REG_LOAD_PTR);
|
|
|
|
/* config Mailbox */
|
|
value = ((atomic_read(&adapter->tpd_ring.next_to_use)
|
|
& MB_TPD_PROD_INDX_MASK) << MB_TPD_PROD_INDX_SHIFT) |
|
|
((atomic_read(&adapter->rrd_ring.next_to_clean)
|
|
& MB_RRD_CONS_INDX_MASK) << MB_RRD_CONS_INDX_SHIFT) |
|
|
((atomic_read(&adapter->rfd_ring.next_to_use)
|
|
& MB_RFD_PROD_INDX_MASK) << MB_RFD_PROD_INDX_SHIFT);
|
|
iowrite32(value, hw->hw_addr + REG_MAILBOX);
|
|
|
|
/* config IPG/IFG */
|
|
value = (((u32) hw->ipgt & MAC_IPG_IFG_IPGT_MASK)
|
|
<< MAC_IPG_IFG_IPGT_SHIFT) |
|
|
(((u32) hw->min_ifg & MAC_IPG_IFG_MIFG_MASK)
|
|
<< MAC_IPG_IFG_MIFG_SHIFT) |
|
|
(((u32) hw->ipgr1 & MAC_IPG_IFG_IPGR1_MASK)
|
|
<< MAC_IPG_IFG_IPGR1_SHIFT) |
|
|
(((u32) hw->ipgr2 & MAC_IPG_IFG_IPGR2_MASK)
|
|
<< MAC_IPG_IFG_IPGR2_SHIFT);
|
|
iowrite32(value, hw->hw_addr + REG_MAC_IPG_IFG);
|
|
|
|
/* config Half-Duplex Control */
|
|
value = ((u32) hw->lcol & MAC_HALF_DUPLX_CTRL_LCOL_MASK) |
|
|
(((u32) hw->max_retry & MAC_HALF_DUPLX_CTRL_RETRY_MASK)
|
|
<< MAC_HALF_DUPLX_CTRL_RETRY_SHIFT) |
|
|
MAC_HALF_DUPLX_CTRL_EXC_DEF_EN |
|
|
(0xa << MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT) |
|
|
(((u32) hw->jam_ipg & MAC_HALF_DUPLX_CTRL_JAMIPG_MASK)
|
|
<< MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT);
|
|
iowrite32(value, hw->hw_addr + REG_MAC_HALF_DUPLX_CTRL);
|
|
|
|
/* set Interrupt Moderator Timer */
|
|
iowrite16(adapter->imt, hw->hw_addr + REG_IRQ_MODU_TIMER_INIT);
|
|
iowrite32(MASTER_CTRL_ITIMER_EN, hw->hw_addr + REG_MASTER_CTRL);
|
|
|
|
/* set Interrupt Clear Timer */
|
|
iowrite16(adapter->ict, hw->hw_addr + REG_CMBDISDMA_TIMER);
|
|
|
|
/* set max frame size hw will accept */
|
|
iowrite32(hw->max_frame_size, hw->hw_addr + REG_MTU);
|
|
|
|
/* jumbo size & rrd retirement timer */
|
|
value = (((u32) hw->rx_jumbo_th & RXQ_JMBOSZ_TH_MASK)
|
|
<< RXQ_JMBOSZ_TH_SHIFT) |
|
|
(((u32) hw->rx_jumbo_lkah & RXQ_JMBO_LKAH_MASK)
|
|
<< RXQ_JMBO_LKAH_SHIFT) |
|
|
(((u32) hw->rrd_ret_timer & RXQ_RRD_TIMER_MASK)
|
|
<< RXQ_RRD_TIMER_SHIFT);
|
|
iowrite32(value, hw->hw_addr + REG_RXQ_JMBOSZ_RRDTIM);
|
|
|
|
/* Flow Control */
|
|
switch (hw->dev_rev) {
|
|
case 0x8001:
|
|
case 0x9001:
|
|
case 0x9002:
|
|
case 0x9003:
|
|
set_flow_ctrl_old(adapter);
|
|
break;
|
|
default:
|
|
set_flow_ctrl_new(hw);
|
|
break;
|
|
}
|
|
|
|
/* config TXQ */
|
|
value = (((u32) hw->tpd_burst & TXQ_CTRL_TPD_BURST_NUM_MASK)
|
|
<< TXQ_CTRL_TPD_BURST_NUM_SHIFT) |
|
|
(((u32) hw->txf_burst & TXQ_CTRL_TXF_BURST_NUM_MASK)
|
|
<< TXQ_CTRL_TXF_BURST_NUM_SHIFT) |
|
|
(((u32) hw->tpd_fetch_th & TXQ_CTRL_TPD_FETCH_TH_MASK)
|
|
<< TXQ_CTRL_TPD_FETCH_TH_SHIFT) | TXQ_CTRL_ENH_MODE |
|
|
TXQ_CTRL_EN;
|
|
iowrite32(value, hw->hw_addr + REG_TXQ_CTRL);
|
|
|
|
/* min tpd fetch gap & tx jumbo packet size threshold for taskoffload */
|
|
value = (((u32) hw->tx_jumbo_task_th & TX_JUMBO_TASK_TH_MASK)
|
|
<< TX_JUMBO_TASK_TH_SHIFT) |
|
|
(((u32) hw->tpd_fetch_gap & TX_TPD_MIN_IPG_MASK)
|
|
<< TX_TPD_MIN_IPG_SHIFT);
|
|
iowrite32(value, hw->hw_addr + REG_TX_JUMBO_TASK_TH_TPD_IPG);
|
|
|
|
/* config RXQ */
|
|
value = (((u32) hw->rfd_burst & RXQ_CTRL_RFD_BURST_NUM_MASK)
|
|
<< RXQ_CTRL_RFD_BURST_NUM_SHIFT) |
|
|
(((u32) hw->rrd_burst & RXQ_CTRL_RRD_BURST_THRESH_MASK)
|
|
<< RXQ_CTRL_RRD_BURST_THRESH_SHIFT) |
|
|
(((u32) hw->rfd_fetch_gap & RXQ_CTRL_RFD_PREF_MIN_IPG_MASK)
|
|
<< RXQ_CTRL_RFD_PREF_MIN_IPG_SHIFT) | RXQ_CTRL_CUT_THRU_EN |
|
|
RXQ_CTRL_EN;
|
|
iowrite32(value, hw->hw_addr + REG_RXQ_CTRL);
|
|
|
|
/* config DMA Engine */
|
|
value = ((((u32) hw->dmar_block) & DMA_CTRL_DMAR_BURST_LEN_MASK)
|
|
<< DMA_CTRL_DMAR_BURST_LEN_SHIFT) |
|
|
((((u32) hw->dmaw_block) & DMA_CTRL_DMAW_BURST_LEN_MASK)
|
|
<< DMA_CTRL_DMAW_BURST_LEN_SHIFT) | DMA_CTRL_DMAR_EN |
|
|
DMA_CTRL_DMAW_EN;
|
|
value |= (u32) hw->dma_ord;
|
|
if (atl1_rcb_128 == hw->rcb_value)
|
|
value |= DMA_CTRL_RCB_VALUE;
|
|
iowrite32(value, hw->hw_addr + REG_DMA_CTRL);
|
|
|
|
/* config CMB / SMB */
|
|
value = (hw->cmb_tpd > adapter->tpd_ring.count) ?
|
|
hw->cmb_tpd : adapter->tpd_ring.count;
|
|
value <<= 16;
|
|
value |= hw->cmb_rrd;
|
|
iowrite32(value, hw->hw_addr + REG_CMB_WRITE_TH);
|
|
value = hw->cmb_rx_timer | ((u32) hw->cmb_tx_timer << 16);
|
|
iowrite32(value, hw->hw_addr + REG_CMB_WRITE_TIMER);
|
|
iowrite32(hw->smb_timer, hw->hw_addr + REG_SMB_TIMER);
|
|
|
|
/* --- enable CMB / SMB */
|
|
value = CSMB_CTRL_CMB_EN | CSMB_CTRL_SMB_EN;
|
|
iowrite32(value, hw->hw_addr + REG_CSMB_CTRL);
|
|
|
|
value = ioread32(adapter->hw.hw_addr + REG_ISR);
|
|
if (unlikely((value & ISR_PHY_LINKDOWN) != 0))
|
|
value = 1; /* config failed */
|
|
else
|
|
value = 0;
|
|
|
|
/* clear all interrupt status */
|
|
iowrite32(0x3fffffff, adapter->hw.hw_addr + REG_ISR);
|
|
iowrite32(0, adapter->hw.hw_addr + REG_ISR);
|
|
return value;
|
|
}
|
|
|
|
/*
|
|
* atl1_pcie_patch - Patch for PCIE module
|
|
*/
|
|
static void atl1_pcie_patch(struct atl1_adapter *adapter)
|
|
{
|
|
u32 value;
|
|
|
|
/* much vendor magic here */
|
|
value = 0x6500;
|
|
iowrite32(value, adapter->hw.hw_addr + 0x12FC);
|
|
/* pcie flow control mode change */
|
|
value = ioread32(adapter->hw.hw_addr + 0x1008);
|
|
value |= 0x8000;
|
|
iowrite32(value, adapter->hw.hw_addr + 0x1008);
|
|
}
|
|
|
|
/*
|
|
* When ACPI resume on some VIA MotherBoard, the Interrupt Disable bit/0x400
|
|
* on PCI Command register is disable.
|
|
* The function enable this bit.
|
|
* Brackett, 2006/03/15
|
|
*/
|
|
static void atl1_via_workaround(struct atl1_adapter *adapter)
|
|
{
|
|
unsigned long value;
|
|
|
|
value = ioread16(adapter->hw.hw_addr + PCI_COMMAND);
|
|
if (value & PCI_COMMAND_INTX_DISABLE)
|
|
value &= ~PCI_COMMAND_INTX_DISABLE;
|
|
iowrite32(value, adapter->hw.hw_addr + PCI_COMMAND);
|
|
}
|
|
|
|
/*
|
|
* atl1_irq_enable - Enable default interrupt generation settings
|
|
* @adapter: board private structure
|
|
*/
|
|
static void atl1_irq_enable(struct atl1_adapter *adapter)
|
|
{
|
|
iowrite32(IMR_NORMAL_MASK, adapter->hw.hw_addr + REG_IMR);
|
|
ioread32(adapter->hw.hw_addr + REG_IMR);
|
|
}
|
|
|
|
/*
|
|
* atl1_irq_disable - Mask off interrupt generation on the NIC
|
|
* @adapter: board private structure
|
|
*/
|
|
static void atl1_irq_disable(struct atl1_adapter *adapter)
|
|
{
|
|
iowrite32(0, adapter->hw.hw_addr + REG_IMR);
|
|
ioread32(adapter->hw.hw_addr + REG_IMR);
|
|
synchronize_irq(adapter->pdev->irq);
|
|
}
|
|
|
|
static void atl1_clear_phy_int(struct atl1_adapter *adapter)
|
|
{
|
|
u16 phy_data;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&adapter->lock, flags);
|
|
atl1_read_phy_reg(&adapter->hw, 19, &phy_data);
|
|
spin_unlock_irqrestore(&adapter->lock, flags);
|
|
}
|
|
|
|
static void atl1_inc_smb(struct atl1_adapter *adapter)
|
|
{
|
|
struct stats_msg_block *smb = adapter->smb.smb;
|
|
|
|
/* Fill out the OS statistics structure */
|
|
adapter->soft_stats.rx_packets += smb->rx_ok;
|
|
adapter->soft_stats.tx_packets += smb->tx_ok;
|
|
adapter->soft_stats.rx_bytes += smb->rx_byte_cnt;
|
|
adapter->soft_stats.tx_bytes += smb->tx_byte_cnt;
|
|
adapter->soft_stats.multicast += smb->rx_mcast;
|
|
adapter->soft_stats.collisions += (smb->tx_1_col + smb->tx_2_col * 2 +
|
|
smb->tx_late_col + smb->tx_abort_col * adapter->hw.max_retry);
|
|
|
|
/* Rx Errors */
|
|
adapter->soft_stats.rx_errors += (smb->rx_frag + smb->rx_fcs_err +
|
|
smb->rx_len_err + smb->rx_sz_ov + smb->rx_rxf_ov +
|
|
smb->rx_rrd_ov + smb->rx_align_err);
|
|
adapter->soft_stats.rx_fifo_errors += smb->rx_rxf_ov;
|
|
adapter->soft_stats.rx_length_errors += smb->rx_len_err;
|
|
adapter->soft_stats.rx_crc_errors += smb->rx_fcs_err;
|
|
adapter->soft_stats.rx_frame_errors += smb->rx_align_err;
|
|
adapter->soft_stats.rx_missed_errors += (smb->rx_rrd_ov +
|
|
smb->rx_rxf_ov);
|
|
|
|
adapter->soft_stats.rx_pause += smb->rx_pause;
|
|
adapter->soft_stats.rx_rrd_ov += smb->rx_rrd_ov;
|
|
adapter->soft_stats.rx_trunc += smb->rx_sz_ov;
|
|
|
|
/* Tx Errors */
|
|
adapter->soft_stats.tx_errors += (smb->tx_late_col +
|
|
smb->tx_abort_col + smb->tx_underrun + smb->tx_trunc);
|
|
adapter->soft_stats.tx_fifo_errors += smb->tx_underrun;
|
|
adapter->soft_stats.tx_aborted_errors += smb->tx_abort_col;
|
|
adapter->soft_stats.tx_window_errors += smb->tx_late_col;
|
|
|
|
adapter->soft_stats.excecol += smb->tx_abort_col;
|
|
adapter->soft_stats.deffer += smb->tx_defer;
|
|
adapter->soft_stats.scc += smb->tx_1_col;
|
|
adapter->soft_stats.mcc += smb->tx_2_col;
|
|
adapter->soft_stats.latecol += smb->tx_late_col;
|
|
adapter->soft_stats.tx_underun += smb->tx_underrun;
|
|
adapter->soft_stats.tx_trunc += smb->tx_trunc;
|
|
adapter->soft_stats.tx_pause += smb->tx_pause;
|
|
|
|
adapter->net_stats.rx_packets = adapter->soft_stats.rx_packets;
|
|
adapter->net_stats.tx_packets = adapter->soft_stats.tx_packets;
|
|
adapter->net_stats.rx_bytes = adapter->soft_stats.rx_bytes;
|
|
adapter->net_stats.tx_bytes = adapter->soft_stats.tx_bytes;
|
|
adapter->net_stats.multicast = adapter->soft_stats.multicast;
|
|
adapter->net_stats.collisions = adapter->soft_stats.collisions;
|
|
adapter->net_stats.rx_errors = adapter->soft_stats.rx_errors;
|
|
adapter->net_stats.rx_over_errors =
|
|
adapter->soft_stats.rx_missed_errors;
|
|
adapter->net_stats.rx_length_errors =
|
|
adapter->soft_stats.rx_length_errors;
|
|
adapter->net_stats.rx_crc_errors = adapter->soft_stats.rx_crc_errors;
|
|
adapter->net_stats.rx_frame_errors =
|
|
adapter->soft_stats.rx_frame_errors;
|
|
adapter->net_stats.rx_fifo_errors = adapter->soft_stats.rx_fifo_errors;
|
|
adapter->net_stats.rx_missed_errors =
|
|
adapter->soft_stats.rx_missed_errors;
|
|
adapter->net_stats.tx_errors = adapter->soft_stats.tx_errors;
|
|
adapter->net_stats.tx_fifo_errors = adapter->soft_stats.tx_fifo_errors;
|
|
adapter->net_stats.tx_aborted_errors =
|
|
adapter->soft_stats.tx_aborted_errors;
|
|
adapter->net_stats.tx_window_errors =
|
|
adapter->soft_stats.tx_window_errors;
|
|
adapter->net_stats.tx_carrier_errors =
|
|
adapter->soft_stats.tx_carrier_errors;
|
|
}
|
|
|
|
/*
|
|
* atl1_get_stats - Get System Network Statistics
|
|
* @netdev: network interface device structure
|
|
*
|
|
* Returns the address of the device statistics structure.
|
|
* The statistics are actually updated from the timer callback.
|
|
*/
|
|
static struct net_device_stats *atl1_get_stats(struct net_device *netdev)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
return &adapter->net_stats;
|
|
}
|
|
|
|
static void atl1_update_mailbox(struct atl1_adapter *adapter)
|
|
{
|
|
unsigned long flags;
|
|
u32 tpd_next_to_use;
|
|
u32 rfd_next_to_use;
|
|
u32 rrd_next_to_clean;
|
|
u32 value;
|
|
|
|
spin_lock_irqsave(&adapter->mb_lock, flags);
|
|
|
|
tpd_next_to_use = atomic_read(&adapter->tpd_ring.next_to_use);
|
|
rfd_next_to_use = atomic_read(&adapter->rfd_ring.next_to_use);
|
|
rrd_next_to_clean = atomic_read(&adapter->rrd_ring.next_to_clean);
|
|
|
|
value = ((rfd_next_to_use & MB_RFD_PROD_INDX_MASK) <<
|
|
MB_RFD_PROD_INDX_SHIFT) |
|
|
((rrd_next_to_clean & MB_RRD_CONS_INDX_MASK) <<
|
|
MB_RRD_CONS_INDX_SHIFT) |
|
|
((tpd_next_to_use & MB_TPD_PROD_INDX_MASK) <<
|
|
MB_TPD_PROD_INDX_SHIFT);
|
|
iowrite32(value, adapter->hw.hw_addr + REG_MAILBOX);
|
|
|
|
spin_unlock_irqrestore(&adapter->mb_lock, flags);
|
|
}
|
|
|
|
static void atl1_clean_alloc_flag(struct atl1_adapter *adapter,
|
|
struct rx_return_desc *rrd, u16 offset)
|
|
{
|
|
struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
|
|
|
|
while (rfd_ring->next_to_clean != (rrd->buf_indx + offset)) {
|
|
rfd_ring->buffer_info[rfd_ring->next_to_clean].alloced = 0;
|
|
if (++rfd_ring->next_to_clean == rfd_ring->count) {
|
|
rfd_ring->next_to_clean = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void atl1_update_rfd_index(struct atl1_adapter *adapter,
|
|
struct rx_return_desc *rrd)
|
|
{
|
|
u16 num_buf;
|
|
|
|
num_buf = (rrd->xsz.xsum_sz.pkt_size + adapter->rx_buffer_len - 1) /
|
|
adapter->rx_buffer_len;
|
|
if (rrd->num_buf == num_buf)
|
|
/* clean alloc flag for bad rrd */
|
|
atl1_clean_alloc_flag(adapter, rrd, num_buf);
|
|
}
|
|
|
|
static void atl1_rx_checksum(struct atl1_adapter *adapter,
|
|
struct rx_return_desc *rrd, struct sk_buff *skb)
|
|
{
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
|
|
skb->ip_summed = CHECKSUM_NONE;
|
|
|
|
if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) {
|
|
if (rrd->err_flg & (ERR_FLAG_CRC | ERR_FLAG_TRUNC |
|
|
ERR_FLAG_CODE | ERR_FLAG_OV)) {
|
|
adapter->hw_csum_err++;
|
|
dev_printk(KERN_DEBUG, &pdev->dev,
|
|
"rx checksum error\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* not IPv4 */
|
|
if (!(rrd->pkt_flg & PACKET_FLAG_IPV4))
|
|
/* checksum is invalid, but it's not an IPv4 pkt, so ok */
|
|
return;
|
|
|
|
/* IPv4 packet */
|
|
if (likely(!(rrd->err_flg &
|
|
(ERR_FLAG_IP_CHKSUM | ERR_FLAG_L4_CHKSUM)))) {
|
|
skb->ip_summed = CHECKSUM_UNNECESSARY;
|
|
adapter->hw_csum_good++;
|
|
return;
|
|
}
|
|
|
|
/* IPv4, but hardware thinks its checksum is wrong */
|
|
dev_printk(KERN_DEBUG, &pdev->dev,
|
|
"hw csum wrong, pkt_flag:%x, err_flag:%x\n",
|
|
rrd->pkt_flg, rrd->err_flg);
|
|
skb->ip_summed = CHECKSUM_COMPLETE;
|
|
skb->csum = htons(rrd->xsz.xsum_sz.rx_chksum);
|
|
adapter->hw_csum_err++;
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* atl1_alloc_rx_buffers - Replace used receive buffers
|
|
* @adapter: address of board private structure
|
|
*/
|
|
static u16 atl1_alloc_rx_buffers(struct atl1_adapter *adapter)
|
|
{
|
|
struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
struct page *page;
|
|
unsigned long offset;
|
|
struct atl1_buffer *buffer_info, *next_info;
|
|
struct sk_buff *skb;
|
|
u16 num_alloc = 0;
|
|
u16 rfd_next_to_use, next_next;
|
|
struct rx_free_desc *rfd_desc;
|
|
|
|
next_next = rfd_next_to_use = atomic_read(&rfd_ring->next_to_use);
|
|
if (++next_next == rfd_ring->count)
|
|
next_next = 0;
|
|
buffer_info = &rfd_ring->buffer_info[rfd_next_to_use];
|
|
next_info = &rfd_ring->buffer_info[next_next];
|
|
|
|
while (!buffer_info->alloced && !next_info->alloced) {
|
|
if (buffer_info->skb) {
|
|
buffer_info->alloced = 1;
|
|
goto next;
|
|
}
|
|
|
|
rfd_desc = ATL1_RFD_DESC(rfd_ring, rfd_next_to_use);
|
|
|
|
skb = dev_alloc_skb(adapter->rx_buffer_len + NET_IP_ALIGN);
|
|
if (unlikely(!skb)) { /* Better luck next round */
|
|
adapter->net_stats.rx_dropped++;
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Make buffer alignment 2 beyond a 16 byte boundary
|
|
* this will result in a 16 byte aligned IP header after
|
|
* the 14 byte MAC header is removed
|
|
*/
|
|
skb_reserve(skb, NET_IP_ALIGN);
|
|
|
|
buffer_info->alloced = 1;
|
|
buffer_info->skb = skb;
|
|
buffer_info->length = (u16) adapter->rx_buffer_len;
|
|
page = virt_to_page(skb->data);
|
|
offset = (unsigned long)skb->data & ~PAGE_MASK;
|
|
buffer_info->dma = pci_map_page(pdev, page, offset,
|
|
adapter->rx_buffer_len,
|
|
PCI_DMA_FROMDEVICE);
|
|
rfd_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
|
|
rfd_desc->buf_len = cpu_to_le16(adapter->rx_buffer_len);
|
|
rfd_desc->coalese = 0;
|
|
|
|
next:
|
|
rfd_next_to_use = next_next;
|
|
if (unlikely(++next_next == rfd_ring->count))
|
|
next_next = 0;
|
|
|
|
buffer_info = &rfd_ring->buffer_info[rfd_next_to_use];
|
|
next_info = &rfd_ring->buffer_info[next_next];
|
|
num_alloc++;
|
|
}
|
|
|
|
if (num_alloc) {
|
|
/*
|
|
* Force memory writes to complete before letting h/w
|
|
* know there are new descriptors to fetch. (Only
|
|
* applicable for weak-ordered memory model archs,
|
|
* such as IA-64).
|
|
*/
|
|
wmb();
|
|
atomic_set(&rfd_ring->next_to_use, (int)rfd_next_to_use);
|
|
}
|
|
return num_alloc;
|
|
}
|
|
|
|
static void atl1_intr_rx(struct atl1_adapter *adapter)
|
|
{
|
|
int i, count;
|
|
u16 length;
|
|
u16 rrd_next_to_clean;
|
|
u32 value;
|
|
struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
|
|
struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring;
|
|
struct atl1_buffer *buffer_info;
|
|
struct rx_return_desc *rrd;
|
|
struct sk_buff *skb;
|
|
|
|
count = 0;
|
|
|
|
rrd_next_to_clean = atomic_read(&rrd_ring->next_to_clean);
|
|
|
|
while (1) {
|
|
rrd = ATL1_RRD_DESC(rrd_ring, rrd_next_to_clean);
|
|
i = 1;
|
|
if (likely(rrd->xsz.valid)) { /* packet valid */
|
|
chk_rrd:
|
|
/* check rrd status */
|
|
if (likely(rrd->num_buf == 1))
|
|
goto rrd_ok;
|
|
|
|
/* rrd seems to be bad */
|
|
if (unlikely(i-- > 0)) {
|
|
/* rrd may not be DMAed completely */
|
|
dev_printk(KERN_DEBUG, &adapter->pdev->dev,
|
|
"incomplete RRD DMA transfer\n");
|
|
udelay(1);
|
|
goto chk_rrd;
|
|
}
|
|
/* bad rrd */
|
|
dev_printk(KERN_DEBUG, &adapter->pdev->dev,
|
|
"bad RRD\n");
|
|
/* see if update RFD index */
|
|
if (rrd->num_buf > 1)
|
|
atl1_update_rfd_index(adapter, rrd);
|
|
|
|
/* update rrd */
|
|
rrd->xsz.valid = 0;
|
|
if (++rrd_next_to_clean == rrd_ring->count)
|
|
rrd_next_to_clean = 0;
|
|
count++;
|
|
continue;
|
|
} else { /* current rrd still not be updated */
|
|
|
|
break;
|
|
}
|
|
rrd_ok:
|
|
/* clean alloc flag for bad rrd */
|
|
atl1_clean_alloc_flag(adapter, rrd, 0);
|
|
|
|
buffer_info = &rfd_ring->buffer_info[rrd->buf_indx];
|
|
if (++rfd_ring->next_to_clean == rfd_ring->count)
|
|
rfd_ring->next_to_clean = 0;
|
|
|
|
/* update rrd next to clean */
|
|
if (++rrd_next_to_clean == rrd_ring->count)
|
|
rrd_next_to_clean = 0;
|
|
count++;
|
|
|
|
if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) {
|
|
if (!(rrd->err_flg &
|
|
(ERR_FLAG_IP_CHKSUM | ERR_FLAG_L4_CHKSUM
|
|
| ERR_FLAG_LEN))) {
|
|
/* packet error, don't need upstream */
|
|
buffer_info->alloced = 0;
|
|
rrd->xsz.valid = 0;
|
|
continue;
|
|
}
|
|
}
|
|
|
|
/* Good Receive */
|
|
pci_unmap_page(adapter->pdev, buffer_info->dma,
|
|
buffer_info->length, PCI_DMA_FROMDEVICE);
|
|
skb = buffer_info->skb;
|
|
length = le16_to_cpu(rrd->xsz.xsum_sz.pkt_size);
|
|
|
|
skb_put(skb, length - ETH_FCS_LEN);
|
|
|
|
/* Receive Checksum Offload */
|
|
atl1_rx_checksum(adapter, rrd, skb);
|
|
skb->protocol = eth_type_trans(skb, adapter->netdev);
|
|
|
|
if (adapter->vlgrp && (rrd->pkt_flg & PACKET_FLAG_VLAN_INS)) {
|
|
u16 vlan_tag = (rrd->vlan_tag >> 4) |
|
|
((rrd->vlan_tag & 7) << 13) |
|
|
((rrd->vlan_tag & 8) << 9);
|
|
vlan_hwaccel_rx(skb, adapter->vlgrp, vlan_tag);
|
|
} else
|
|
netif_rx(skb);
|
|
|
|
/* let protocol layer free skb */
|
|
buffer_info->skb = NULL;
|
|
buffer_info->alloced = 0;
|
|
rrd->xsz.valid = 0;
|
|
|
|
adapter->netdev->last_rx = jiffies;
|
|
}
|
|
|
|
atomic_set(&rrd_ring->next_to_clean, rrd_next_to_clean);
|
|
|
|
atl1_alloc_rx_buffers(adapter);
|
|
|
|
/* update mailbox ? */
|
|
if (count) {
|
|
u32 tpd_next_to_use;
|
|
u32 rfd_next_to_use;
|
|
|
|
spin_lock(&adapter->mb_lock);
|
|
|
|
tpd_next_to_use = atomic_read(&adapter->tpd_ring.next_to_use);
|
|
rfd_next_to_use =
|
|
atomic_read(&adapter->rfd_ring.next_to_use);
|
|
rrd_next_to_clean =
|
|
atomic_read(&adapter->rrd_ring.next_to_clean);
|
|
value = ((rfd_next_to_use & MB_RFD_PROD_INDX_MASK) <<
|
|
MB_RFD_PROD_INDX_SHIFT) |
|
|
((rrd_next_to_clean & MB_RRD_CONS_INDX_MASK) <<
|
|
MB_RRD_CONS_INDX_SHIFT) |
|
|
((tpd_next_to_use & MB_TPD_PROD_INDX_MASK) <<
|
|
MB_TPD_PROD_INDX_SHIFT);
|
|
iowrite32(value, adapter->hw.hw_addr + REG_MAILBOX);
|
|
spin_unlock(&adapter->mb_lock);
|
|
}
|
|
}
|
|
|
|
static void atl1_intr_tx(struct atl1_adapter *adapter)
|
|
{
|
|
struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
|
|
struct atl1_buffer *buffer_info;
|
|
u16 sw_tpd_next_to_clean;
|
|
u16 cmb_tpd_next_to_clean;
|
|
|
|
sw_tpd_next_to_clean = atomic_read(&tpd_ring->next_to_clean);
|
|
cmb_tpd_next_to_clean = le16_to_cpu(adapter->cmb.cmb->tpd_cons_idx);
|
|
|
|
while (cmb_tpd_next_to_clean != sw_tpd_next_to_clean) {
|
|
struct tx_packet_desc *tpd;
|
|
|
|
tpd = ATL1_TPD_DESC(tpd_ring, sw_tpd_next_to_clean);
|
|
buffer_info = &tpd_ring->buffer_info[sw_tpd_next_to_clean];
|
|
if (buffer_info->dma) {
|
|
pci_unmap_page(adapter->pdev, buffer_info->dma,
|
|
buffer_info->length, PCI_DMA_TODEVICE);
|
|
buffer_info->dma = 0;
|
|
}
|
|
|
|
if (buffer_info->skb) {
|
|
dev_kfree_skb_irq(buffer_info->skb);
|
|
buffer_info->skb = NULL;
|
|
}
|
|
tpd->buffer_addr = 0;
|
|
tpd->desc.data = 0;
|
|
|
|
if (++sw_tpd_next_to_clean == tpd_ring->count)
|
|
sw_tpd_next_to_clean = 0;
|
|
}
|
|
atomic_set(&tpd_ring->next_to_clean, sw_tpd_next_to_clean);
|
|
|
|
if (netif_queue_stopped(adapter->netdev)
|
|
&& netif_carrier_ok(adapter->netdev))
|
|
netif_wake_queue(adapter->netdev);
|
|
}
|
|
|
|
static u16 atl1_tpd_avail(struct atl1_tpd_ring *tpd_ring)
|
|
{
|
|
u16 next_to_clean = atomic_read(&tpd_ring->next_to_clean);
|
|
u16 next_to_use = atomic_read(&tpd_ring->next_to_use);
|
|
return ((next_to_clean > next_to_use) ?
|
|
next_to_clean - next_to_use - 1 :
|
|
tpd_ring->count + next_to_clean - next_to_use - 1);
|
|
}
|
|
|
|
static int atl1_tso(struct atl1_adapter *adapter, struct sk_buff *skb,
|
|
struct tso_param *tso)
|
|
{
|
|
/* We enter this function holding a spinlock. */
|
|
u8 ipofst;
|
|
int err;
|
|
|
|
if (skb_shinfo(skb)->gso_size) {
|
|
if (skb_header_cloned(skb)) {
|
|
err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
|
|
if (unlikely(err))
|
|
return err;
|
|
}
|
|
|
|
if (skb->protocol == ntohs(ETH_P_IP)) {
|
|
struct iphdr *iph = ip_hdr(skb);
|
|
|
|
iph->tot_len = 0;
|
|
iph->check = 0;
|
|
tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
|
|
iph->daddr, 0, IPPROTO_TCP, 0);
|
|
ipofst = skb_network_offset(skb);
|
|
if (ipofst != ETH_HLEN) /* 802.3 frame */
|
|
tso->tsopl |= 1 << TSO_PARAM_ETHTYPE_SHIFT;
|
|
|
|
tso->tsopl |= (iph->ihl &
|
|
CSUM_PARAM_IPHL_MASK) << CSUM_PARAM_IPHL_SHIFT;
|
|
tso->tsopl |= (tcp_hdrlen(skb) &
|
|
TSO_PARAM_TCPHDRLEN_MASK) <<
|
|
TSO_PARAM_TCPHDRLEN_SHIFT;
|
|
tso->tsopl |= (skb_shinfo(skb)->gso_size &
|
|
TSO_PARAM_MSS_MASK) << TSO_PARAM_MSS_SHIFT;
|
|
tso->tsopl |= 1 << TSO_PARAM_IPCKSUM_SHIFT;
|
|
tso->tsopl |= 1 << TSO_PARAM_TCPCKSUM_SHIFT;
|
|
tso->tsopl |= 1 << TSO_PARAM_SEGMENT_SHIFT;
|
|
return true;
|
|
}
|
|
}
|
|
return false;
|
|
}
|
|
|
|
static int atl1_tx_csum(struct atl1_adapter *adapter, struct sk_buff *skb,
|
|
struct csum_param *csum)
|
|
{
|
|
u8 css, cso;
|
|
|
|
if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
|
|
cso = skb_transport_offset(skb);
|
|
css = cso + skb->csum_offset;
|
|
if (unlikely(cso & 0x1)) {
|
|
dev_printk(KERN_DEBUG, &adapter->pdev->dev,
|
|
"payload offset not an even number\n");
|
|
return -1;
|
|
}
|
|
csum->csumpl |= (cso & CSUM_PARAM_PLOADOFFSET_MASK) <<
|
|
CSUM_PARAM_PLOADOFFSET_SHIFT;
|
|
csum->csumpl |= (css & CSUM_PARAM_XSUMOFFSET_MASK) <<
|
|
CSUM_PARAM_XSUMOFFSET_SHIFT;
|
|
csum->csumpl |= 1 << CSUM_PARAM_CUSTOMCKSUM_SHIFT;
|
|
return true;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static void atl1_tx_map(struct atl1_adapter *adapter, struct sk_buff *skb,
|
|
bool tcp_seg)
|
|
{
|
|
/* We enter this function holding a spinlock. */
|
|
struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
|
|
struct atl1_buffer *buffer_info;
|
|
struct page *page;
|
|
int first_buf_len = skb->len;
|
|
unsigned long offset;
|
|
unsigned int nr_frags;
|
|
unsigned int f;
|
|
u16 tpd_next_to_use;
|
|
u16 proto_hdr_len;
|
|
u16 len12;
|
|
|
|
first_buf_len -= skb->data_len;
|
|
nr_frags = skb_shinfo(skb)->nr_frags;
|
|
tpd_next_to_use = atomic_read(&tpd_ring->next_to_use);
|
|
buffer_info = &tpd_ring->buffer_info[tpd_next_to_use];
|
|
if (unlikely(buffer_info->skb))
|
|
BUG();
|
|
buffer_info->skb = NULL; /* put skb in last TPD */
|
|
|
|
if (tcp_seg) {
|
|
/* TSO/GSO */
|
|
proto_hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
|
|
buffer_info->length = proto_hdr_len;
|
|
page = virt_to_page(skb->data);
|
|
offset = (unsigned long)skb->data & ~PAGE_MASK;
|
|
buffer_info->dma = pci_map_page(adapter->pdev, page,
|
|
offset, proto_hdr_len,
|
|
PCI_DMA_TODEVICE);
|
|
|
|
if (++tpd_next_to_use == tpd_ring->count)
|
|
tpd_next_to_use = 0;
|
|
|
|
if (first_buf_len > proto_hdr_len) {
|
|
int i, m;
|
|
|
|
len12 = first_buf_len - proto_hdr_len;
|
|
m = (len12 + ATL1_MAX_TX_BUF_LEN - 1) /
|
|
ATL1_MAX_TX_BUF_LEN;
|
|
for (i = 0; i < m; i++) {
|
|
buffer_info =
|
|
&tpd_ring->buffer_info[tpd_next_to_use];
|
|
buffer_info->skb = NULL;
|
|
buffer_info->length =
|
|
(ATL1_MAX_TX_BUF_LEN >=
|
|
len12) ? ATL1_MAX_TX_BUF_LEN : len12;
|
|
len12 -= buffer_info->length;
|
|
page = virt_to_page(skb->data +
|
|
(proto_hdr_len +
|
|
i * ATL1_MAX_TX_BUF_LEN));
|
|
offset = (unsigned long)(skb->data +
|
|
(proto_hdr_len +
|
|
i * ATL1_MAX_TX_BUF_LEN)) & ~PAGE_MASK;
|
|
buffer_info->dma = pci_map_page(adapter->pdev,
|
|
page, offset, buffer_info->length,
|
|
PCI_DMA_TODEVICE);
|
|
if (++tpd_next_to_use == tpd_ring->count)
|
|
tpd_next_to_use = 0;
|
|
}
|
|
}
|
|
} else {
|
|
/* not TSO/GSO */
|
|
buffer_info->length = first_buf_len;
|
|
page = virt_to_page(skb->data);
|
|
offset = (unsigned long)skb->data & ~PAGE_MASK;
|
|
buffer_info->dma = pci_map_page(adapter->pdev, page,
|
|
offset, first_buf_len, PCI_DMA_TODEVICE);
|
|
if (++tpd_next_to_use == tpd_ring->count)
|
|
tpd_next_to_use = 0;
|
|
}
|
|
|
|
for (f = 0; f < nr_frags; f++) {
|
|
struct skb_frag_struct *frag;
|
|
u16 lenf, i, m;
|
|
|
|
frag = &skb_shinfo(skb)->frags[f];
|
|
lenf = frag->size;
|
|
|
|
m = (lenf + ATL1_MAX_TX_BUF_LEN - 1) / ATL1_MAX_TX_BUF_LEN;
|
|
for (i = 0; i < m; i++) {
|
|
buffer_info = &tpd_ring->buffer_info[tpd_next_to_use];
|
|
if (unlikely(buffer_info->skb))
|
|
BUG();
|
|
buffer_info->skb = NULL;
|
|
buffer_info->length = (lenf > ATL1_MAX_TX_BUF_LEN) ?
|
|
ATL1_MAX_TX_BUF_LEN : lenf;
|
|
lenf -= buffer_info->length;
|
|
buffer_info->dma = pci_map_page(adapter->pdev,
|
|
frag->page,
|
|
frag->page_offset + (i * ATL1_MAX_TX_BUF_LEN),
|
|
buffer_info->length, PCI_DMA_TODEVICE);
|
|
|
|
if (++tpd_next_to_use == tpd_ring->count)
|
|
tpd_next_to_use = 0;
|
|
}
|
|
}
|
|
|
|
/* last tpd's buffer-info */
|
|
buffer_info->skb = skb;
|
|
}
|
|
|
|
static void atl1_tx_queue(struct atl1_adapter *adapter, int count,
|
|
union tpd_descr *descr)
|
|
{
|
|
/* We enter this function holding a spinlock. */
|
|
struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
|
|
int j;
|
|
u32 val;
|
|
struct atl1_buffer *buffer_info;
|
|
struct tx_packet_desc *tpd;
|
|
u16 tpd_next_to_use = atomic_read(&tpd_ring->next_to_use);
|
|
|
|
for (j = 0; j < count; j++) {
|
|
buffer_info = &tpd_ring->buffer_info[tpd_next_to_use];
|
|
tpd = ATL1_TPD_DESC(&adapter->tpd_ring, tpd_next_to_use);
|
|
tpd->desc.csum.csumpu = descr->csum.csumpu;
|
|
tpd->desc.csum.csumpl = descr->csum.csumpl;
|
|
tpd->desc.tso.tsopu = descr->tso.tsopu;
|
|
tpd->desc.tso.tsopl = descr->tso.tsopl;
|
|
tpd->buffer_addr = cpu_to_le64(buffer_info->dma);
|
|
tpd->desc.data = descr->data;
|
|
tpd->desc.csum.csumpu |= (cpu_to_le16(buffer_info->length) &
|
|
CSUM_PARAM_BUFLEN_MASK) << CSUM_PARAM_BUFLEN_SHIFT;
|
|
|
|
val = (descr->tso.tsopl >> TSO_PARAM_SEGMENT_SHIFT) &
|
|
TSO_PARAM_SEGMENT_MASK;
|
|
if (val && !j)
|
|
tpd->desc.tso.tsopl |= 1 << TSO_PARAM_HDRFLAG_SHIFT;
|
|
|
|
if (j == (count - 1))
|
|
tpd->desc.csum.csumpl |= 1 << CSUM_PARAM_EOP_SHIFT;
|
|
|
|
if (++tpd_next_to_use == tpd_ring->count)
|
|
tpd_next_to_use = 0;
|
|
}
|
|
/*
|
|
* Force memory writes to complete before letting h/w
|
|
* know there are new descriptors to fetch. (Only
|
|
* applicable for weak-ordered memory model archs,
|
|
* such as IA-64).
|
|
*/
|
|
wmb();
|
|
|
|
atomic_set(&tpd_ring->next_to_use, (int)tpd_next_to_use);
|
|
}
|
|
|
|
static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
int len = skb->len;
|
|
int tso;
|
|
int count = 1;
|
|
int ret_val;
|
|
u32 val;
|
|
union tpd_descr param;
|
|
u16 frag_size;
|
|
u16 vlan_tag;
|
|
unsigned long flags;
|
|
unsigned int nr_frags = 0;
|
|
unsigned int mss = 0;
|
|
unsigned int f;
|
|
unsigned int proto_hdr_len;
|
|
|
|
len -= skb->data_len;
|
|
|
|
if (unlikely(skb->len == 0)) {
|
|
dev_kfree_skb_any(skb);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
param.data = 0;
|
|
param.tso.tsopu = 0;
|
|
param.tso.tsopl = 0;
|
|
param.csum.csumpu = 0;
|
|
param.csum.csumpl = 0;
|
|
|
|
/* nr_frags will be nonzero if we're doing scatter/gather (SG) */
|
|
nr_frags = skb_shinfo(skb)->nr_frags;
|
|
for (f = 0; f < nr_frags; f++) {
|
|
frag_size = skb_shinfo(skb)->frags[f].size;
|
|
if (frag_size)
|
|
count += (frag_size + ATL1_MAX_TX_BUF_LEN - 1) /
|
|
ATL1_MAX_TX_BUF_LEN;
|
|
}
|
|
|
|
/* mss will be nonzero if we're doing segment offload (TSO/GSO) */
|
|
mss = skb_shinfo(skb)->gso_size;
|
|
if (mss) {
|
|
if (skb->protocol == htons(ETH_P_IP)) {
|
|
proto_hdr_len = (skb_transport_offset(skb) +
|
|
tcp_hdrlen(skb));
|
|
if (unlikely(proto_hdr_len > len)) {
|
|
dev_kfree_skb_any(skb);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
/* need additional TPD ? */
|
|
if (proto_hdr_len != len)
|
|
count += (len - proto_hdr_len +
|
|
ATL1_MAX_TX_BUF_LEN - 1) /
|
|
ATL1_MAX_TX_BUF_LEN;
|
|
}
|
|
}
|
|
|
|
if (!spin_trylock_irqsave(&adapter->lock, flags)) {
|
|
/* Can't get lock - tell upper layer to requeue */
|
|
dev_printk(KERN_DEBUG, &adapter->pdev->dev, "tx locked\n");
|
|
return NETDEV_TX_LOCKED;
|
|
}
|
|
|
|
if (atl1_tpd_avail(&adapter->tpd_ring) < count) {
|
|
/* not enough descriptors */
|
|
netif_stop_queue(netdev);
|
|
spin_unlock_irqrestore(&adapter->lock, flags);
|
|
dev_printk(KERN_DEBUG, &adapter->pdev->dev, "tx busy\n");
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
|
|
param.data = 0;
|
|
|
|
if (adapter->vlgrp && vlan_tx_tag_present(skb)) {
|
|
vlan_tag = vlan_tx_tag_get(skb);
|
|
vlan_tag = (vlan_tag << 4) | (vlan_tag >> 13) |
|
|
((vlan_tag >> 9) & 0x8);
|
|
param.csum.csumpl |= 1 << CSUM_PARAM_INSVLAG_SHIFT;
|
|
param.csum.csumpu |= (vlan_tag & CSUM_PARAM_VALANTAG_MASK) <<
|
|
CSUM_PARAM_VALAN_SHIFT;
|
|
}
|
|
|
|
tso = atl1_tso(adapter, skb, ¶m.tso);
|
|
if (tso < 0) {
|
|
spin_unlock_irqrestore(&adapter->lock, flags);
|
|
dev_kfree_skb_any(skb);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
if (!tso) {
|
|
ret_val = atl1_tx_csum(adapter, skb, ¶m.csum);
|
|
if (ret_val < 0) {
|
|
spin_unlock_irqrestore(&adapter->lock, flags);
|
|
dev_kfree_skb_any(skb);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
}
|
|
|
|
val = (param.csum.csumpl >> CSUM_PARAM_SEGMENT_SHIFT) &
|
|
CSUM_PARAM_SEGMENT_MASK;
|
|
atl1_tx_map(adapter, skb, 1 == val);
|
|
atl1_tx_queue(adapter, count, ¶m);
|
|
netdev->trans_start = jiffies;
|
|
spin_unlock_irqrestore(&adapter->lock, flags);
|
|
atl1_update_mailbox(adapter);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
/*
|
|
* atl1_intr - Interrupt Handler
|
|
* @irq: interrupt number
|
|
* @data: pointer to a network interface device structure
|
|
* @pt_regs: CPU registers structure
|
|
*/
|
|
static irqreturn_t atl1_intr(int irq, void *data)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(data);
|
|
u32 status;
|
|
u8 update_rx;
|
|
int max_ints = 10;
|
|
|
|
status = adapter->cmb.cmb->int_stats;
|
|
if (!status)
|
|
return IRQ_NONE;
|
|
|
|
update_rx = 0;
|
|
|
|
do {
|
|
/* clear CMB interrupt status at once */
|
|
adapter->cmb.cmb->int_stats = 0;
|
|
|
|
if (status & ISR_GPHY) /* clear phy status */
|
|
atl1_clear_phy_int(adapter);
|
|
|
|
/* clear ISR status, and Enable CMB DMA/Disable Interrupt */
|
|
iowrite32(status | ISR_DIS_INT, adapter->hw.hw_addr + REG_ISR);
|
|
|
|
/* check if SMB intr */
|
|
if (status & ISR_SMB)
|
|
atl1_inc_smb(adapter);
|
|
|
|
/* check if PCIE PHY Link down */
|
|
if (status & ISR_PHY_LINKDOWN) {
|
|
dev_printk(KERN_DEBUG, &adapter->pdev->dev,
|
|
"pcie phy link down %x\n", status);
|
|
if (netif_running(adapter->netdev)) { /* reset MAC */
|
|
iowrite32(0, adapter->hw.hw_addr + REG_IMR);
|
|
schedule_work(&adapter->pcie_dma_to_rst_task);
|
|
return IRQ_HANDLED;
|
|
}
|
|
}
|
|
|
|
/* check if DMA read/write error ? */
|
|
if (status & (ISR_DMAR_TO_RST | ISR_DMAW_TO_RST)) {
|
|
dev_printk(KERN_DEBUG, &adapter->pdev->dev,
|
|
"pcie DMA r/w error (status = 0x%x)\n",
|
|
status);
|
|
iowrite32(0, adapter->hw.hw_addr + REG_IMR);
|
|
schedule_work(&adapter->pcie_dma_to_rst_task);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* link event */
|
|
if (status & ISR_GPHY) {
|
|
adapter->soft_stats.tx_carrier_errors++;
|
|
atl1_check_for_link(adapter);
|
|
}
|
|
|
|
/* transmit event */
|
|
if (status & ISR_CMB_TX)
|
|
atl1_intr_tx(adapter);
|
|
|
|
/* rx exception */
|
|
if (unlikely(status & (ISR_RXF_OV | ISR_RFD_UNRUN |
|
|
ISR_RRD_OV | ISR_HOST_RFD_UNRUN |
|
|
ISR_HOST_RRD_OV | ISR_CMB_RX))) {
|
|
if (status & (ISR_RXF_OV | ISR_RFD_UNRUN |
|
|
ISR_RRD_OV | ISR_HOST_RFD_UNRUN |
|
|
ISR_HOST_RRD_OV))
|
|
dev_printk(KERN_DEBUG, &adapter->pdev->dev,
|
|
"rx exception, ISR = 0x%x\n", status);
|
|
atl1_intr_rx(adapter);
|
|
}
|
|
|
|
if (--max_ints < 0)
|
|
break;
|
|
|
|
} while ((status = adapter->cmb.cmb->int_stats));
|
|
|
|
/* re-enable Interrupt */
|
|
iowrite32(ISR_DIS_SMB | ISR_DIS_DMA, adapter->hw.hw_addr + REG_ISR);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* atl1_watchdog - Timer Call-back
|
|
* @data: pointer to netdev cast into an unsigned long
|
|
*/
|
|
static void atl1_watchdog(unsigned long data)
|
|
{
|
|
struct atl1_adapter *adapter = (struct atl1_adapter *)data;
|
|
|
|
/* Reset the timer */
|
|
mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
|
|
}
|
|
|
|
/*
|
|
* atl1_phy_config - Timer Call-back
|
|
* @data: pointer to netdev cast into an unsigned long
|
|
*/
|
|
static void atl1_phy_config(unsigned long data)
|
|
{
|
|
struct atl1_adapter *adapter = (struct atl1_adapter *)data;
|
|
struct atl1_hw *hw = &adapter->hw;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&adapter->lock, flags);
|
|
adapter->phy_timer_pending = false;
|
|
atl1_write_phy_reg(hw, MII_ADVERTISE, hw->mii_autoneg_adv_reg);
|
|
atl1_write_phy_reg(hw, MII_AT001_CR, hw->mii_1000t_ctrl_reg);
|
|
atl1_write_phy_reg(hw, MII_BMCR, MII_CR_RESET | MII_CR_AUTO_NEG_EN);
|
|
spin_unlock_irqrestore(&adapter->lock, flags);
|
|
}
|
|
|
|
/*
|
|
* atl1_tx_timeout - Respond to a Tx Hang
|
|
* @netdev: network interface device structure
|
|
*/
|
|
static void atl1_tx_timeout(struct net_device *netdev)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
/* Do the reset outside of interrupt context */
|
|
schedule_work(&adapter->tx_timeout_task);
|
|
}
|
|
|
|
/*
|
|
* Orphaned vendor comment left intact here:
|
|
* <vendor comment>
|
|
* If TPD Buffer size equal to 0, PCIE DMAR_TO_INT
|
|
* will assert. We do soft reset <0x1400=1> according
|
|
* with the SPEC. BUT, it seemes that PCIE or DMA
|
|
* state-machine will not be reset. DMAR_TO_INT will
|
|
* assert again and again.
|
|
* </vendor comment>
|
|
*/
|
|
static void atl1_tx_timeout_task(struct work_struct *work)
|
|
{
|
|
struct atl1_adapter *adapter =
|
|
container_of(work, struct atl1_adapter, tx_timeout_task);
|
|
struct net_device *netdev = adapter->netdev;
|
|
|
|
netif_device_detach(netdev);
|
|
atl1_down(adapter);
|
|
atl1_up(adapter);
|
|
netif_device_attach(netdev);
|
|
}
|
|
|
|
/*
|
|
* atl1_link_chg_task - deal with link change event Out of interrupt context
|
|
*/
|
|
static void atl1_link_chg_task(struct work_struct *work)
|
|
{
|
|
struct atl1_adapter *adapter =
|
|
container_of(work, struct atl1_adapter, link_chg_task);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&adapter->lock, flags);
|
|
atl1_check_link(adapter);
|
|
spin_unlock_irqrestore(&adapter->lock, flags);
|
|
}
|
|
|
|
static void atl1_vlan_rx_register(struct net_device *netdev,
|
|
struct vlan_group *grp)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
unsigned long flags;
|
|
u32 ctrl;
|
|
|
|
spin_lock_irqsave(&adapter->lock, flags);
|
|
/* atl1_irq_disable(adapter); */
|
|
adapter->vlgrp = grp;
|
|
|
|
if (grp) {
|
|
/* enable VLAN tag insert/strip */
|
|
ctrl = ioread32(adapter->hw.hw_addr + REG_MAC_CTRL);
|
|
ctrl |= MAC_CTRL_RMV_VLAN;
|
|
iowrite32(ctrl, adapter->hw.hw_addr + REG_MAC_CTRL);
|
|
} else {
|
|
/* disable VLAN tag insert/strip */
|
|
ctrl = ioread32(adapter->hw.hw_addr + REG_MAC_CTRL);
|
|
ctrl &= ~MAC_CTRL_RMV_VLAN;
|
|
iowrite32(ctrl, adapter->hw.hw_addr + REG_MAC_CTRL);
|
|
}
|
|
|
|
/* atl1_irq_enable(adapter); */
|
|
spin_unlock_irqrestore(&adapter->lock, flags);
|
|
}
|
|
|
|
static void atl1_restore_vlan(struct atl1_adapter *adapter)
|
|
{
|
|
atl1_vlan_rx_register(adapter->netdev, adapter->vlgrp);
|
|
}
|
|
|
|
int atl1_reset(struct atl1_adapter *adapter)
|
|
{
|
|
int ret;
|
|
|
|
ret = atl1_reset_hw(&adapter->hw);
|
|
if (ret != ATL1_SUCCESS)
|
|
return ret;
|
|
return atl1_init_hw(&adapter->hw);
|
|
}
|
|
|
|
s32 atl1_up(struct atl1_adapter *adapter)
|
|
{
|
|
struct net_device *netdev = adapter->netdev;
|
|
int err;
|
|
int irq_flags = IRQF_SAMPLE_RANDOM;
|
|
|
|
/* hardware has been reset, we need to reload some things */
|
|
atl1_set_multi(netdev);
|
|
atl1_init_ring_ptrs(adapter);
|
|
atl1_restore_vlan(adapter);
|
|
err = atl1_alloc_rx_buffers(adapter);
|
|
if (unlikely(!err)) /* no RX BUFFER allocated */
|
|
return -ENOMEM;
|
|
|
|
if (unlikely(atl1_configure(adapter))) {
|
|
err = -EIO;
|
|
goto err_up;
|
|
}
|
|
|
|
err = pci_enable_msi(adapter->pdev);
|
|
if (err) {
|
|
dev_info(&adapter->pdev->dev,
|
|
"Unable to enable MSI: %d\n", err);
|
|
irq_flags |= IRQF_SHARED;
|
|
}
|
|
|
|
err = request_irq(adapter->pdev->irq, &atl1_intr, irq_flags,
|
|
netdev->name, netdev);
|
|
if (unlikely(err))
|
|
goto err_up;
|
|
|
|
mod_timer(&adapter->watchdog_timer, jiffies);
|
|
atl1_irq_enable(adapter);
|
|
atl1_check_link(adapter);
|
|
return 0;
|
|
|
|
err_up:
|
|
pci_disable_msi(adapter->pdev);
|
|
/* free rx_buffers */
|
|
atl1_clean_rx_ring(adapter);
|
|
return err;
|
|
}
|
|
|
|
void atl1_down(struct atl1_adapter *adapter)
|
|
{
|
|
struct net_device *netdev = adapter->netdev;
|
|
|
|
del_timer_sync(&adapter->watchdog_timer);
|
|
del_timer_sync(&adapter->phy_config_timer);
|
|
adapter->phy_timer_pending = false;
|
|
|
|
atl1_irq_disable(adapter);
|
|
free_irq(adapter->pdev->irq, netdev);
|
|
pci_disable_msi(adapter->pdev);
|
|
atl1_reset_hw(&adapter->hw);
|
|
adapter->cmb.cmb->int_stats = 0;
|
|
|
|
adapter->link_speed = SPEED_0;
|
|
adapter->link_duplex = -1;
|
|
netif_carrier_off(netdev);
|
|
netif_stop_queue(netdev);
|
|
|
|
atl1_clean_tx_ring(adapter);
|
|
atl1_clean_rx_ring(adapter);
|
|
}
|
|
|
|
/*
|
|
* atl1_open - Called when a network interface is made active
|
|
* @netdev: network interface device structure
|
|
*
|
|
* Returns 0 on success, negative value on failure
|
|
*
|
|
* The open entry point is called when a network interface is made
|
|
* active by the system (IFF_UP). At this point all resources needed
|
|
* for transmit and receive operations are allocated, the interrupt
|
|
* handler is registered with the OS, the watchdog timer is started,
|
|
* and the stack is notified that the interface is ready.
|
|
*/
|
|
static int atl1_open(struct net_device *netdev)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
int err;
|
|
|
|
/* allocate transmit descriptors */
|
|
err = atl1_setup_ring_resources(adapter);
|
|
if (err)
|
|
return err;
|
|
|
|
err = atl1_up(adapter);
|
|
if (err)
|
|
goto err_up;
|
|
|
|
return 0;
|
|
|
|
err_up:
|
|
atl1_reset(adapter);
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* atl1_close - Disables a network interface
|
|
* @netdev: network interface device structure
|
|
*
|
|
* Returns 0, this is not allowed to fail
|
|
*
|
|
* The close entry point is called when an interface is de-activated
|
|
* by the OS. The hardware is still under the drivers control, but
|
|
* needs to be disabled. A global MAC reset is issued to stop the
|
|
* hardware, and all transmit and receive resources are freed.
|
|
*/
|
|
static int atl1_close(struct net_device *netdev)
|
|
{
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
atl1_down(adapter);
|
|
atl1_free_ring_resources(adapter);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int atl1_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
struct net_device *netdev = pci_get_drvdata(pdev);
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
struct atl1_hw *hw = &adapter->hw;
|
|
u32 ctrl = 0;
|
|
u32 wufc = adapter->wol;
|
|
|
|
netif_device_detach(netdev);
|
|
if (netif_running(netdev))
|
|
atl1_down(adapter);
|
|
|
|
atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl);
|
|
atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl);
|
|
if (ctrl & BMSR_LSTATUS)
|
|
wufc &= ~ATL1_WUFC_LNKC;
|
|
|
|
/* reduce speed to 10/100M */
|
|
if (wufc) {
|
|
atl1_phy_enter_power_saving(hw);
|
|
/* if resume, let driver to re- setup link */
|
|
hw->phy_configured = false;
|
|
atl1_set_mac_addr(hw);
|
|
atl1_set_multi(netdev);
|
|
|
|
ctrl = 0;
|
|
/* turn on magic packet wol */
|
|
if (wufc & ATL1_WUFC_MAG)
|
|
ctrl = WOL_MAGIC_EN | WOL_MAGIC_PME_EN;
|
|
|
|
/* turn on Link change WOL */
|
|
if (wufc & ATL1_WUFC_LNKC)
|
|
ctrl |= (WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN);
|
|
iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL);
|
|
|
|
/* turn on all-multi mode if wake on multicast is enabled */
|
|
ctrl = ioread32(hw->hw_addr + REG_MAC_CTRL);
|
|
ctrl &= ~MAC_CTRL_DBG;
|
|
ctrl &= ~MAC_CTRL_PROMIS_EN;
|
|
if (wufc & ATL1_WUFC_MC)
|
|
ctrl |= MAC_CTRL_MC_ALL_EN;
|
|
else
|
|
ctrl &= ~MAC_CTRL_MC_ALL_EN;
|
|
|
|
/* turn on broadcast mode if wake on-BC is enabled */
|
|
if (wufc & ATL1_WUFC_BC)
|
|
ctrl |= MAC_CTRL_BC_EN;
|
|
else
|
|
ctrl &= ~MAC_CTRL_BC_EN;
|
|
|
|
/* enable RX */
|
|
ctrl |= MAC_CTRL_RX_EN;
|
|
iowrite32(ctrl, hw->hw_addr + REG_MAC_CTRL);
|
|
pci_enable_wake(pdev, PCI_D3hot, 1);
|
|
pci_enable_wake(pdev, PCI_D3cold, 1);
|
|
} else {
|
|
iowrite32(0, hw->hw_addr + REG_WOL_CTRL);
|
|
pci_enable_wake(pdev, PCI_D3hot, 0);
|
|
pci_enable_wake(pdev, PCI_D3cold, 0);
|
|
}
|
|
|
|
pci_save_state(pdev);
|
|
pci_disable_device(pdev);
|
|
|
|
pci_set_power_state(pdev, PCI_D3hot);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int atl1_resume(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *netdev = pci_get_drvdata(pdev);
|
|
struct atl1_adapter *adapter = netdev_priv(netdev);
|
|
u32 ret_val;
|
|
|
|
pci_set_power_state(pdev, 0);
|
|
pci_restore_state(pdev);
|
|
|
|
ret_val = pci_enable_device(pdev);
|
|
pci_enable_wake(pdev, PCI_D3hot, 0);
|
|
pci_enable_wake(pdev, PCI_D3cold, 0);
|
|
|
|
iowrite32(0, adapter->hw.hw_addr + REG_WOL_CTRL);
|
|
atl1_reset(adapter);
|
|
|
|
if (netif_running(netdev))
|
|
atl1_up(adapter);
|
|
netif_device_attach(netdev);
|
|
|
|
atl1_via_workaround(adapter);
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
#define atl1_suspend NULL
|
|
#define atl1_resume NULL
|
|
#endif
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
static void atl1_poll_controller(struct net_device *netdev)
|
|
{
|
|
disable_irq(netdev->irq);
|
|
atl1_intr(netdev->irq, netdev);
|
|
enable_irq(netdev->irq);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* atl1_probe - Device Initialization Routine
|
|
* @pdev: PCI device information struct
|
|
* @ent: entry in atl1_pci_tbl
|
|
*
|
|
* Returns 0 on success, negative on failure
|
|
*
|
|
* atl1_probe initializes an adapter identified by a pci_dev structure.
|
|
* The OS initialization, configuring of the adapter private structure,
|
|
* and a hardware reset occur.
|
|
*/
|
|
static int __devinit atl1_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
struct net_device *netdev;
|
|
struct atl1_adapter *adapter;
|
|
static int cards_found = 0;
|
|
int err;
|
|
|
|
err = pci_enable_device(pdev);
|
|
if (err)
|
|
return err;
|
|
|
|
/*
|
|
* The atl1 chip can DMA to 64-bit addresses, but it uses a single
|
|
* shared register for the high 32 bits, so only a single, aligned,
|
|
* 4 GB physical address range can be used at a time.
|
|
*
|
|
* Supporting 64-bit DMA on this hardware is more trouble than it's
|
|
* worth. It is far easier to limit to 32-bit DMA than update
|
|
* various kernel subsystems to support the mechanics required by a
|
|
* fixed-high-32-bit system.
|
|
*/
|
|
err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "no usable DMA configuration\n");
|
|
goto err_dma;
|
|
}
|
|
/* Mark all PCI regions associated with PCI device
|
|
* pdev as being reserved by owner atl1_driver_name
|
|
*/
|
|
err = pci_request_regions(pdev, atl1_driver_name);
|
|
if (err)
|
|
goto err_request_regions;
|
|
|
|
/* Enables bus-mastering on the device and calls
|
|
* pcibios_set_master to do the needed arch specific settings
|
|
*/
|
|
pci_set_master(pdev);
|
|
|
|
netdev = alloc_etherdev(sizeof(struct atl1_adapter));
|
|
if (!netdev) {
|
|
err = -ENOMEM;
|
|
goto err_alloc_etherdev;
|
|
}
|
|
SET_NETDEV_DEV(netdev, &pdev->dev);
|
|
|
|
pci_set_drvdata(pdev, netdev);
|
|
adapter = netdev_priv(netdev);
|
|
adapter->netdev = netdev;
|
|
adapter->pdev = pdev;
|
|
adapter->hw.back = adapter;
|
|
|
|
adapter->hw.hw_addr = pci_iomap(pdev, 0, 0);
|
|
if (!adapter->hw.hw_addr) {
|
|
err = -EIO;
|
|
goto err_pci_iomap;
|
|
}
|
|
/* get device revision number */
|
|
adapter->hw.dev_rev = ioread16(adapter->hw.hw_addr +
|
|
(REG_MASTER_CTRL + 2));
|
|
dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION);
|
|
|
|
/* set default ring resource counts */
|
|
adapter->rfd_ring.count = adapter->rrd_ring.count = ATL1_DEFAULT_RFD;
|
|
adapter->tpd_ring.count = ATL1_DEFAULT_TPD;
|
|
|
|
adapter->mii.dev = netdev;
|
|
adapter->mii.mdio_read = mdio_read;
|
|
adapter->mii.mdio_write = mdio_write;
|
|
adapter->mii.phy_id_mask = 0x1f;
|
|
adapter->mii.reg_num_mask = 0x1f;
|
|
|
|
netdev->open = &atl1_open;
|
|
netdev->stop = &atl1_close;
|
|
netdev->hard_start_xmit = &atl1_xmit_frame;
|
|
netdev->get_stats = &atl1_get_stats;
|
|
netdev->set_multicast_list = &atl1_set_multi;
|
|
netdev->set_mac_address = &atl1_set_mac;
|
|
netdev->change_mtu = &atl1_change_mtu;
|
|
netdev->do_ioctl = &atl1_ioctl;
|
|
netdev->tx_timeout = &atl1_tx_timeout;
|
|
netdev->watchdog_timeo = 5 * HZ;
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
netdev->poll_controller = atl1_poll_controller;
|
|
#endif
|
|
netdev->vlan_rx_register = atl1_vlan_rx_register;
|
|
|
|
netdev->ethtool_ops = &atl1_ethtool_ops;
|
|
adapter->bd_number = cards_found;
|
|
|
|
/* setup the private structure */
|
|
err = atl1_sw_init(adapter);
|
|
if (err)
|
|
goto err_common;
|
|
|
|
netdev->features = NETIF_F_HW_CSUM;
|
|
netdev->features |= NETIF_F_SG;
|
|
netdev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX);
|
|
|
|
/*
|
|
* FIXME - Until tso performance gets fixed, disable the feature.
|
|
* Enable it with ethtool -K if desired.
|
|
*/
|
|
/* netdev->features |= NETIF_F_TSO; */
|
|
|
|
netdev->features |= NETIF_F_LLTX;
|
|
|
|
/*
|
|
* patch for some L1 of old version,
|
|
* the final version of L1 may not need these
|
|
* patches
|
|
*/
|
|
/* atl1_pcie_patch(adapter); */
|
|
|
|
/* really reset GPHY core */
|
|
iowrite16(0, adapter->hw.hw_addr + REG_GPHY_ENABLE);
|
|
|
|
/*
|
|
* reset the controller to
|
|
* put the device in a known good starting state
|
|
*/
|
|
if (atl1_reset_hw(&adapter->hw)) {
|
|
err = -EIO;
|
|
goto err_common;
|
|
}
|
|
|
|
/* copy the MAC address out of the EEPROM */
|
|
atl1_read_mac_addr(&adapter->hw);
|
|
memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len);
|
|
|
|
if (!is_valid_ether_addr(netdev->dev_addr)) {
|
|
err = -EIO;
|
|
goto err_common;
|
|
}
|
|
|
|
atl1_check_options(adapter);
|
|
|
|
/* pre-init the MAC, and setup link */
|
|
err = atl1_init_hw(&adapter->hw);
|
|
if (err) {
|
|
err = -EIO;
|
|
goto err_common;
|
|
}
|
|
|
|
atl1_pcie_patch(adapter);
|
|
/* assume we have no link for now */
|
|
netif_carrier_off(netdev);
|
|
netif_stop_queue(netdev);
|
|
|
|
init_timer(&adapter->watchdog_timer);
|
|
adapter->watchdog_timer.function = &atl1_watchdog;
|
|
adapter->watchdog_timer.data = (unsigned long)adapter;
|
|
|
|
init_timer(&adapter->phy_config_timer);
|
|
adapter->phy_config_timer.function = &atl1_phy_config;
|
|
adapter->phy_config_timer.data = (unsigned long)adapter;
|
|
adapter->phy_timer_pending = false;
|
|
|
|
INIT_WORK(&adapter->tx_timeout_task, atl1_tx_timeout_task);
|
|
|
|
INIT_WORK(&adapter->link_chg_task, atl1_link_chg_task);
|
|
|
|
INIT_WORK(&adapter->pcie_dma_to_rst_task, atl1_tx_timeout_task);
|
|
|
|
err = register_netdev(netdev);
|
|
if (err)
|
|
goto err_common;
|
|
|
|
cards_found++;
|
|
atl1_via_workaround(adapter);
|
|
return 0;
|
|
|
|
err_common:
|
|
pci_iounmap(pdev, adapter->hw.hw_addr);
|
|
err_pci_iomap:
|
|
free_netdev(netdev);
|
|
err_alloc_etherdev:
|
|
pci_release_regions(pdev);
|
|
err_dma:
|
|
err_request_regions:
|
|
pci_disable_device(pdev);
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* atl1_remove - Device Removal Routine
|
|
* @pdev: PCI device information struct
|
|
*
|
|
* atl1_remove is called by the PCI subsystem to alert the driver
|
|
* that it should release a PCI device. The could be caused by a
|
|
* Hot-Plug event, or because the driver is going to be removed from
|
|
* memory.
|
|
*/
|
|
static void __devexit atl1_remove(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *netdev = pci_get_drvdata(pdev);
|
|
struct atl1_adapter *adapter;
|
|
/* Device not available. Return. */
|
|
if (!netdev)
|
|
return;
|
|
|
|
adapter = netdev_priv(netdev);
|
|
|
|
/* Some atl1 boards lack persistent storage for their MAC, and get it
|
|
* from the BIOS during POST. If we've been messing with the MAC
|
|
* address, we need to save the permanent one.
|
|
*/
|
|
if (memcmp(adapter->hw.mac_addr, adapter->hw.perm_mac_addr, ETH_ALEN)) {
|
|
memcpy(adapter->hw.mac_addr, adapter->hw.perm_mac_addr,
|
|
ETH_ALEN);
|
|
atl1_set_mac_addr(&adapter->hw);
|
|
}
|
|
|
|
iowrite16(0, adapter->hw.hw_addr + REG_GPHY_ENABLE);
|
|
unregister_netdev(netdev);
|
|
pci_iounmap(pdev, adapter->hw.hw_addr);
|
|
pci_release_regions(pdev);
|
|
free_netdev(netdev);
|
|
pci_disable_device(pdev);
|
|
}
|
|
|
|
static struct pci_driver atl1_driver = {
|
|
.name = atl1_driver_name,
|
|
.id_table = atl1_pci_tbl,
|
|
.probe = atl1_probe,
|
|
.remove = __devexit_p(atl1_remove),
|
|
.suspend = atl1_suspend,
|
|
.resume = atl1_resume
|
|
};
|
|
|
|
/*
|
|
* atl1_exit_module - Driver Exit Cleanup Routine
|
|
*
|
|
* atl1_exit_module is called just before the driver is removed
|
|
* from memory.
|
|
*/
|
|
static void __exit atl1_exit_module(void)
|
|
{
|
|
pci_unregister_driver(&atl1_driver);
|
|
}
|
|
|
|
/*
|
|
* atl1_init_module - Driver Registration Routine
|
|
*
|
|
* atl1_init_module is the first routine called when the driver is
|
|
* loaded. All it does is register with the PCI subsystem.
|
|
*/
|
|
static int __init atl1_init_module(void)
|
|
{
|
|
return pci_register_driver(&atl1_driver);
|
|
}
|
|
|
|
module_init(atl1_init_module);
|
|
module_exit(atl1_exit_module);
|