android_kernel_xiaomi_sm8350/drivers/usb/media/sn9c102_sensor.h
Luca Risolia b9df978f19 [PATCH] USB: SN9C10x driver updates
SN9C10x driver updates.

Changes: + new, - removed, * cleanup, @ bugfix

@ Remove bad get_ctrl()'s
* Documentation updates
+ Add 0x0c45/0x602d to the list of SN9C10x based devices
+ Add support for OV7630 image sensors

Signed-off-by: Luca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-12 11:52:56 -07:00

382 lines
19 KiB
C

/***************************************************************************
* API for image sensors connected to the SN9C10x PC Camera Controllers *
* *
* Copyright (C) 2004-2005 by Luca Risolia <luca.risolia@studio.unibo.it> *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* (at your option) any later version. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, write to the Free Software *
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *
***************************************************************************/
#ifndef _SN9C102_SENSOR_H_
#define _SN9C102_SENSOR_H_
#include <linux/usb.h>
#include <linux/videodev.h>
#include <linux/device.h>
#include <linux/stddef.h>
#include <linux/errno.h>
#include <asm/types.h>
struct sn9c102_device;
struct sn9c102_sensor;
/*****************************************************************************/
/*
OVERVIEW.
This is a small interface that allows you to add support for any CCD/CMOS
image sensors connected to the SN9C10X bridges. The entire API is documented
below. In the most general case, to support a sensor there are three steps
you have to follow:
1) define the main "sn9c102_sensor" structure by setting the basic fields;
2) write a probing function to be called by the core module when the USB
camera is recognized, then add both the USB ids and the name of that
function to the two corresponding tables SENSOR_TABLE and ID_TABLE (see
below);
3) implement the methods that you want/need (and fill the rest of the main
structure accordingly).
"sn9c102_pas106b.c" is an example of all this stuff. Remember that you do
NOT need to touch the source code of the core module for the things to work
properly, unless you find bugs or flaws in it. Finally, do not forget to
read the V4L2 API for completeness.
*/
/*****************************************************************************/
/*
Probing functions: on success, you must attach the sensor to the camera
by calling sn9c102_attach_sensor() provided below.
To enable the I2C communication, you might need to perform a really basic
initialization of the SN9C10X chip by using the write function declared
ahead.
Functions must return 0 on success, the appropriate error otherwise.
*/
extern int sn9c102_probe_hv7131d(struct sn9c102_device* cam);
extern int sn9c102_probe_mi0343(struct sn9c102_device* cam);
extern int sn9c102_probe_ov7630(struct sn9c102_device* cam);
extern int sn9c102_probe_pas106b(struct sn9c102_device* cam);
extern int sn9c102_probe_pas202bcb(struct sn9c102_device* cam);
extern int sn9c102_probe_tas5110c1b(struct sn9c102_device* cam);
extern int sn9c102_probe_tas5130d1b(struct sn9c102_device* cam);
/*
Add the above entries to this table. Be sure to add the entry in the right
place, since, on failure, the next probing routine is called according to
the order of the list below, from top to bottom.
*/
#define SN9C102_SENSOR_TABLE \
static int (*sn9c102_sensor_table[])(struct sn9c102_device*) = { \
&sn9c102_probe_mi0343, /* strong detection based on SENSOR ids */ \
&sn9c102_probe_pas106b, /* strong detection based on SENSOR ids */ \
&sn9c102_probe_pas202bcb, /* strong detection based on SENSOR ids */ \
&sn9c102_probe_hv7131d, /* strong detection based on SENSOR ids */ \
&sn9c102_probe_ov7630, /* detection mostly based on USB pid/vid */ \
&sn9c102_probe_tas5110c1b, /* detection based on USB pid/vid */ \
&sn9c102_probe_tas5130d1b, /* detection based on USB pid/vid */ \
NULL, \
};
/* Attach a probed sensor to the camera. */
extern void
sn9c102_attach_sensor(struct sn9c102_device* cam,
struct sn9c102_sensor* sensor);
/* Each SN9C10X camera has proper PID/VID identifiers. Add them here in case.*/
#define SN9C102_ID_TABLE \
static const struct usb_device_id sn9c102_id_table[] = { \
{ USB_DEVICE(0x0c45, 0x6001), }, /* TAS5110C1B */ \
{ USB_DEVICE(0x0c45, 0x6005), }, /* TAS5110C1B */ \
{ USB_DEVICE(0x0c45, 0x6009), }, /* PAS106B */ \
{ USB_DEVICE(0x0c45, 0x600d), }, /* PAS106B */ \
{ USB_DEVICE(0x0c45, 0x6024), }, \
{ USB_DEVICE(0x0c45, 0x6025), }, /* TAS5130D1B and TAS5110C1B */ \
{ USB_DEVICE(0x0c45, 0x6028), }, /* PAS202BCB */ \
{ USB_DEVICE(0x0c45, 0x6029), }, /* PAS106B */ \
{ USB_DEVICE(0x0c45, 0x602a), }, /* HV7131D */ \
{ USB_DEVICE(0x0c45, 0x602b), }, /* MI-0343 */ \
{ USB_DEVICE(0x0c45, 0x602c), }, /* OV7630 */ \
{ USB_DEVICE(0x0c45, 0x602d), }, \
{ USB_DEVICE(0x0c45, 0x6030), }, /* MI03x */ \
{ USB_DEVICE(0x0c45, 0x6080), }, \
{ USB_DEVICE(0x0c45, 0x6082), }, /* MI0343 and MI0360 */ \
{ USB_DEVICE(0x0c45, 0x6083), }, /* HV7131[D|E1] */ \
{ USB_DEVICE(0x0c45, 0x6088), }, \
{ USB_DEVICE(0x0c45, 0x608a), }, \
{ USB_DEVICE(0x0c45, 0x608b), }, \
{ USB_DEVICE(0x0c45, 0x608c), }, /* HV7131x */ \
{ USB_DEVICE(0x0c45, 0x608e), }, /* CIS-VF10 */ \
{ USB_DEVICE(0x0c45, 0x608f), }, /* OV7630 */ \
{ USB_DEVICE(0x0c45, 0x60a0), }, \
{ USB_DEVICE(0x0c45, 0x60a2), }, \
{ USB_DEVICE(0x0c45, 0x60a3), }, \
{ USB_DEVICE(0x0c45, 0x60a8), }, /* PAS106B */ \
{ USB_DEVICE(0x0c45, 0x60aa), }, /* TAS5130D1B */ \
{ USB_DEVICE(0x0c45, 0x60ab), }, /* TAS5110C1B */ \
{ USB_DEVICE(0x0c45, 0x60ac), }, \
{ USB_DEVICE(0x0c45, 0x60ae), }, \
{ USB_DEVICE(0x0c45, 0x60af), }, /* PAS202BCB */ \
{ USB_DEVICE(0x0c45, 0x60b0), }, \
{ USB_DEVICE(0x0c45, 0x60b2), }, \
{ USB_DEVICE(0x0c45, 0x60b3), }, \
{ USB_DEVICE(0x0c45, 0x60b8), }, \
{ USB_DEVICE(0x0c45, 0x60ba), }, \
{ USB_DEVICE(0x0c45, 0x60bb), }, \
{ USB_DEVICE(0x0c45, 0x60bc), }, \
{ USB_DEVICE(0x0c45, 0x60be), }, \
{ } \
};
/*****************************************************************************/
/*
Read/write routines: they always return -1 on error, 0 or the read value
otherwise. NOTE that a real read operation is not supported by the SN9C10X
chip for some of its registers. To work around this problem, a pseudo-read
call is provided instead: it returns the last successfully written value
on the register (0 if it has never been written), the usual -1 on error.
*/
/* The "try" I2C I/O versions are used when probing the sensor */
extern int sn9c102_i2c_try_write(struct sn9c102_device*,struct sn9c102_sensor*,
u8 address, u8 value);
extern int sn9c102_i2c_try_read(struct sn9c102_device*,struct sn9c102_sensor*,
u8 address);
/*
These must be used if and only if the sensor doesn't implement the standard
I2C protocol. There are a number of good reasons why you must use the
single-byte versions of these functions: do not abuse. The first function
writes n bytes, from data0 to datan, to registers 0x09 - 0x09+n of SN9C10X
chip. The second one programs the registers 0x09 and 0x10 with data0 and
data1, and places the n bytes read from the sensor register table in the
buffer pointed by 'buffer'. Both the functions return -1 on error; the write
version returns 0 on success, while the read version returns the first read
byte.
*/
extern int sn9c102_i2c_try_raw_write(struct sn9c102_device* cam,
struct sn9c102_sensor* sensor, u8 n,
u8 data0, u8 data1, u8 data2, u8 data3,
u8 data4, u8 data5);
extern int sn9c102_i2c_try_raw_read(struct sn9c102_device* cam,
struct sn9c102_sensor* sensor, u8 data0,
u8 data1, u8 n, u8 buffer[]);
/* To be used after the sensor struct has been attached to the camera struct */
extern int sn9c102_i2c_write(struct sn9c102_device*, u8 address, u8 value);
extern int sn9c102_i2c_read(struct sn9c102_device*, u8 address);
/* I/O on registers in the bridge. Could be used by the sensor methods too */
extern int sn9c102_write_reg(struct sn9c102_device*, u8 value, u16 index);
extern int sn9c102_pread_reg(struct sn9c102_device*, u16 index);
/*
NOTE: there are no exported debugging functions. To uniform the output you
must use the dev_info()/dev_warn()/dev_err() macros defined in device.h,
already included here, the argument being the struct device 'dev' of the
sensor structure. Do NOT use these macros before the sensor is attached or
the kernel will crash! However, you should not need to notify the user about
common errors or other messages, since this is done by the master module.
*/
/*****************************************************************************/
enum sn9c102_i2c_sysfs_ops {
SN9C102_I2C_READ = 0x01,
SN9C102_I2C_WRITE = 0x02,
};
enum sn9c102_i2c_frequency { /* sensors may support both the frequencies */
SN9C102_I2C_100KHZ = 0x01,
SN9C102_I2C_400KHZ = 0x02,
};
enum sn9c102_i2c_interface {
SN9C102_I2C_2WIRES,
SN9C102_I2C_3WIRES,
};
#define SN9C102_MAX_CTRLS V4L2_CID_LASTP1-V4L2_CID_BASE+10
struct sn9c102_sensor {
char name[32], /* sensor name */
maintainer[64]; /* name of the mantainer <email> */
/* Supported operations through the 'sysfs' interface */
enum sn9c102_i2c_sysfs_ops sysfs_ops;
/*
These sensor capabilities must be provided if the SN9C10X controller
needs to communicate through the sensor serial interface by using
at least one of the i2c functions available.
*/
enum sn9c102_i2c_frequency frequency;
enum sn9c102_i2c_interface interface;
/*
This identifier must be provided if the image sensor implements
the standard I2C protocol.
*/
u8 i2c_slave_id; /* reg. 0x09 */
/*
NOTE: Where not noted,most of the functions below are not mandatory.
Set to null if you do not implement them. If implemented,
they must return 0 on success, the proper error otherwise.
*/
int (*init)(struct sn9c102_device* cam);
/*
This function will be called after the sensor has been attached.
It should be used to initialize the sensor only, but may also
configure part of the SN9C10X chip if necessary. You don't need to
setup picture settings like brightness, contrast, etc.. here, if
the corrisponding controls are implemented (see below), since
they are adjusted in the core driver by calling the set_ctrl()
method after init(), where the arguments are the default values
specified in the v4l2_queryctrl list of supported controls;
Same suggestions apply for other settings, _if_ the corresponding
methods are present; if not, the initialization must configure the
sensor according to the default configuration structures below.
*/
struct v4l2_queryctrl qctrl[SN9C102_MAX_CTRLS];
/*
Optional list of default controls, defined as indicated in the
V4L2 API. Menu type controls are not handled by this interface.
*/
int (*get_ctrl)(struct sn9c102_device* cam, struct v4l2_control* ctrl);
int (*set_ctrl)(struct sn9c102_device* cam,
const struct v4l2_control* ctrl);
/*
You must implement at least the set_ctrl method if you have defined
the list above. The returned value must follow the V4L2
specifications for the VIDIOC_G|C_CTRL ioctls. V4L2_CID_H|VCENTER
are not supported by this driver, so do not implement them. Also,
you don't have to check whether the passed values are out of bounds,
given that this is done by the core module.
*/
struct v4l2_cropcap cropcap;
/*
Think the image sensor as a grid of R,G,B monochromatic pixels
disposed according to a particular Bayer pattern, which describes
the complete array of pixels, from (0,0) to (xmax, ymax). We will
use this coordinate system from now on. It is assumed the sensor
chip can be programmed to capture/transmit a subsection of that
array of pixels: we will call this subsection "active window".
It is not always true that the largest achievable active window can
cover the whole array of pixels. The V4L2 API defines another
area called "source rectangle", which, in turn, is a subrectangle of
the active window. The SN9C10X chip is always programmed to read the
source rectangle.
The bounds of both the active window and the source rectangle are
specified in the cropcap substructures 'bounds' and 'defrect'.
By default, the source rectangle should cover the largest possible
area. Again, it is not always true that the largest source rectangle
can cover the entire active window, although it is a rare case for
the hardware we have. The bounds of the source rectangle _must_ be
multiple of 16 and must use the same coordinate system as indicated
before; their centers shall align initially.
If necessary, the sensor chip must be initialized during init() to
set the bounds of the active sensor window; however, by default, it
usually covers the largest achievable area (maxwidth x maxheight)
of pixels, so no particular initialization is needed, if you have
defined the correct default bounds in the structures.
See the V4L2 API for further details.
NOTE: once you have defined the bounds of the active window
(struct cropcap.bounds) you must not change them.anymore.
Only 'bounds' and 'defrect' fields are mandatory, other fields
will be ignored.
*/
int (*set_crop)(struct sn9c102_device* cam,
const struct v4l2_rect* rect);
/*
To be called on VIDIOC_C_SETCROP. The core module always calls a
default routine which configures the appropriate SN9C10X regs (also
scaling), but you may need to override/adjust specific stuff.
'rect' contains width and height values that are multiple of 16: in
case you override the default function, you always have to program
the chip to match those values; on error return the corresponding
error code without rolling back.
NOTE: in case, you must program the SN9C10X chip to get rid of
blank pixels or blank lines at the _start_ of each line or
frame after each HSYNC or VSYNC, so that the image starts with
real RGB data (see regs 0x12, 0x13) (having set H_SIZE and,
V_SIZE you don't have to care about blank pixels or blank
lines at the end of each line or frame).
*/
struct v4l2_pix_format pix_format;
/*
What you have to define here are: 1) initial 'width' and 'height' of
the target rectangle 2) the initial 'pixelformat', which can be
either V4L2_PIX_FMT_SN9C10X (for compressed video) or
V4L2_PIX_FMT_SBGGR8 3) 'priv', which we'll be used to indicate the
number of bits per pixel for uncompressed video, 8 or 9 (despite the
current value of 'pixelformat').
NOTE 1: both 'width' and 'height' _must_ be either 1/1 or 1/2 or 1/4
of cropcap.defrect.width and cropcap.defrect.height. I
suggest 1/1.
NOTE 2: The initial compression quality is defined by the first bit
of reg 0x17 during the initialization of the image sensor.
NOTE 3: as said above, you have to program the SN9C10X chip to get
rid of any blank pixels, so that the output of the sensor
matches the RGB bayer sequence (i.e. BGBGBG...GRGRGR).
*/
int (*set_pix_format)(struct sn9c102_device* cam,
const struct v4l2_pix_format* pix);
/*
To be called on VIDIOC_S_FMT, when switching from the SBGGR8 to
SN9C10X pixel format or viceversa. On error return the corresponding
error code without rolling back.
*/
const struct device* dev;
/*
This is the argument for dev_err(), dev_info() and dev_warn(). It
is used for debugging purposes. You must not access the struct
before the sensor is attached.
*/
const struct usb_device* usbdev;
/*
Points to the usb_device struct after the sensor is attached.
Do not touch unless you know what you are doing.
*/
/*
Do NOT write to the data below, it's READ ONLY. It is used by the
core module to store successfully updated values of the above
settings, for rollbacks..etc..in case of errors during atomic I/O
*/
struct v4l2_queryctrl _qctrl[SN9C102_MAX_CTRLS];
struct v4l2_rect _rect;
};
/*****************************************************************************/
/* Private ioctl's for control settings supported by some image sensors */
#define SN9C102_V4L2_CID_DAC_MAGNITUDE V4L2_CID_PRIVATE_BASE
#define SN9C102_V4L2_CID_GREEN_BALANCE V4L2_CID_PRIVATE_BASE + 1
#define SN9C102_V4L2_CID_RESET_LEVEL V4L2_CID_PRIVATE_BASE + 2
#define SN9C102_V4L2_CID_PIXEL_BIAS_VOLTAGE V4L2_CID_PRIVATE_BASE + 3
#define SN9C102_V4L2_CID_GAMMA V4L2_CID_PRIVATE_BASE + 4
#define SN9C102_V4L2_CID_BAND_FILTER V4L2_CID_PRIVATE_BASE + 5
#define SN9C102_V4L2_CID_BRIGHT_LEVEL V4L2_CID_PRIVATE_BASE + 6
#endif /* _SN9C102_SENSOR_H_ */