49148020bc
Merge header files for m68k and m68knommu to the single location:
arch/m68k/include/asm
The majority of this patch was the result of the
script that is included in the changelog below.
The script was originally written by Arnd Bergman and
exten by me to cover a few more files.
When the header files differed the script uses the following:
The original m68k file is named <file>_mm.h [mm for memory manager]
The m68knommu file is named <file>_no.h [no for no memory manager]
The files uses the following include guard:
This include gaurd works as the m68knommu toolchain set
the __uClinux__ symbol - so this should work in userspace too.
Merging the header files for m68k and m68knommu exposes the
(unexpected?) ABI differences thus it is easier to actually
identify these and thus to fix them.
The commit has been build tested with both a m68k and
a m68knommu toolchain - with success.
The commit has also been tested with "make headers_check"
and this patch fixes make headers_check for m68knommu.
The script used:
TARGET=arch/m68k/include/asm
SOURCE=arch/m68knommu/include/asm
INCLUDE="cachectl.h errno.h fcntl.h hwtest.h ioctls.h ipcbuf.h \
linkage.h math-emu.h md.h mman.h movs.h msgbuf.h openprom.h \
oplib.h poll.h posix_types.h resource.h rtc.h sembuf.h shmbuf.h \
shm.h shmparam.h socket.h sockios.h spinlock.h statfs.h stat.h \
termbits.h termios.h tlb.h types.h user.h"
EQUAL="auxvec.h cputime.h device.h emergency-restart.h futex.h \
ioctl.h irq_regs.h kdebug.h local.h mutex.h percpu.h \
sections.h topology.h"
NOMUUFILES="anchor.h bootstd.h coldfire.h commproc.h dbg.h \
elia.h flat.h m5206sim.h m520xsim.h m523xsim.h m5249sim.h \
m5272sim.h m527xsim.h m528xsim.h m5307sim.h m532xsim.h \
m5407sim.h m68360_enet.h m68360.h m68360_pram.h m68360_quicc.h \
m68360_regs.h MC68328.h MC68332.h MC68EZ328.h MC68VZ328.h \
mcfcache.h mcfdma.h mcfmbus.h mcfne.h mcfpci.h mcfpit.h \
mcfsim.h mcfsmc.h mcftimer.h mcfuart.h mcfwdebug.h \
nettel.h quicc_simple.h smp.h"
FILES="atomic.h bitops.h bootinfo.h bug.h bugs.h byteorder.h cache.h \
cacheflush.h checksum.h current.h delay.h div64.h \
dma-mapping.h dma.h elf.h entry.h fb.h fpu.h hardirq.h hw_irq.h io.h \
irq.h kmap_types.h machdep.h mc146818rtc.h mmu.h mmu_context.h \
module.h page.h page_offset.h param.h pci.h pgalloc.h \
pgtable.h processor.h ptrace.h scatterlist.h segment.h \
setup.h sigcontext.h siginfo.h signal.h string.h system.h swab.h \
thread_info.h timex.h tlbflush.h traps.h uaccess.h ucontext.h \
unaligned.h unistd.h"
mergefile() {
BASE=${1%.h}
git mv ${SOURCE}/$1 ${TARGET}/${BASE}_no.h
git mv ${TARGET}/$1 ${TARGET}/${BASE}_mm.h
cat << EOF > ${TARGET}/$1
EOF
git add ${TARGET}/$1
}
set -e
mkdir -p ${TARGET}
git mv include/asm-m68k/* ${TARGET}
rmdir include/asm-m68k
git rm ${SOURCE}/Kbuild
for F in $INCLUDE $EQUAL; do
git rm ${SOURCE}/$F
done
for F in $NOMUUFILES; do
git mv ${SOURCE}/$F ${TARGET}/$F
done
for F in $FILES ; do
mergefile $F
done
rmdir arch/m68knommu/include/asm
rmdir arch/m68knommu/include
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
109 lines
3.1 KiB
C
109 lines
3.1 KiB
C
/****************************************************************************/
|
|
|
|
/*
|
|
* nettel.h -- Lineo (formerly Moreton Bay) NETtel support.
|
|
*
|
|
* (C) Copyright 1999-2000, Moreton Bay (www.moretonbay.com)
|
|
* (C) Copyright 2000-2001, Lineo Inc. (www.lineo.com)
|
|
* (C) Copyright 2001-2002, SnapGear Inc., (www.snapgear.com)
|
|
*/
|
|
|
|
/****************************************************************************/
|
|
#ifndef nettel_h
|
|
#define nettel_h
|
|
/****************************************************************************/
|
|
|
|
|
|
/****************************************************************************/
|
|
#ifdef CONFIG_NETtel
|
|
/****************************************************************************/
|
|
|
|
#ifdef CONFIG_COLDFIRE
|
|
#include <asm/coldfire.h>
|
|
#include <asm/mcfsim.h>
|
|
#endif
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
#if defined(CONFIG_M5307)
|
|
/*
|
|
* NETtel/5307 based hardware first. DTR/DCD lines are wired to
|
|
* GPIO lines. Most of the LED's are driver through a latch
|
|
* connected to CS2.
|
|
*/
|
|
#define MCFPP_DCD1 0x0001
|
|
#define MCFPP_DCD0 0x0002
|
|
#define MCFPP_DTR1 0x0004
|
|
#define MCFPP_DTR0 0x0008
|
|
|
|
#define NETtel_LEDADDR 0x30400000
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
extern volatile unsigned short ppdata;
|
|
|
|
/*
|
|
* These functions defined to give quasi generic access to the
|
|
* PPIO bits used for DTR/DCD.
|
|
*/
|
|
static __inline__ unsigned int mcf_getppdata(void)
|
|
{
|
|
volatile unsigned short *pp;
|
|
pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT);
|
|
return((unsigned int) *pp);
|
|
}
|
|
|
|
static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
|
|
{
|
|
volatile unsigned short *pp;
|
|
pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT);
|
|
ppdata = (ppdata & ~mask) | bits;
|
|
*pp = ppdata;
|
|
}
|
|
#endif
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
#elif defined(CONFIG_M5206e)
|
|
/*
|
|
* NETtel/5206e based hardware has leds on latch on CS3.
|
|
* No support modem for lines??
|
|
*/
|
|
#define NETtel_LEDADDR 0x50000000
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
#elif defined(CONFIG_M5272)
|
|
/*
|
|
* NETtel/5272 based hardware. DTR/DCD lines are wired to GPB lines.
|
|
*/
|
|
#define MCFPP_DCD0 0x0080
|
|
#define MCFPP_DCD1 0x0000 /* Port 1 no DCD support */
|
|
#define MCFPP_DTR0 0x0040
|
|
#define MCFPP_DTR1 0x0000 /* Port 1 no DTR support */
|
|
|
|
#ifndef __ASSEMBLY__
|
|
/*
|
|
* These functions defined to give quasi generic access to the
|
|
* PPIO bits used for DTR/DCD.
|
|
*/
|
|
static __inline__ unsigned int mcf_getppdata(void)
|
|
{
|
|
volatile unsigned short *pp;
|
|
pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT);
|
|
return((unsigned int) *pp);
|
|
}
|
|
|
|
static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
|
|
{
|
|
volatile unsigned short *pp;
|
|
pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT);
|
|
*pp = (*pp & ~mask) | bits;
|
|
}
|
|
#endif
|
|
|
|
#endif
|
|
/*---------------------------------------------------------------------------*/
|
|
|
|
/****************************************************************************/
|
|
#endif /* CONFIG_NETtel */
|
|
/****************************************************************************/
|
|
#endif /* nettel_h */
|