android_kernel_xiaomi_sm8350/drivers/net/wireless/rt2x00/Kconfig
Ivo van Doorn 2bb057d07a rt2x00: Implement HW encryption
Various rt2x00 devices support hardware encryption.

Most of them require the IV/EIV to be generated by mac80211,
but require it to be provided seperately instead of within
the frame itself. This means that rt2x00lib should extract
the data from the frame and place it in the frame descriptor.
During RX the IV/EIV is provided in the descriptor by the
hardware which means that it should be inserted into the
frame by rt2x00lib.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22 16:29:58 -04:00

188 lines
4.9 KiB
Plaintext

config RT2X00
tristate "Ralink driver support"
depends on MAC80211 && WLAN_80211 && EXPERIMENTAL
---help---
This will enable the experimental support for the Ralink drivers,
developed in the rt2x00 project <http://rt2x00.serialmonkey.com>.
These drivers make use of the mac80211 stack.
When building one of the individual drivers, the rt2x00 library
will also be created. That library (when the driver is built as
a module) will be called "rt2x00lib.ko".
Additionally PCI and USB libraries will also be build depending
on the types of drivers being selected, these libraries will be
called "rt2x00pci.ko" and "rt2x00usb.ko".
if RT2X00
config RT2X00_LIB
tristate
config RT2X00_LIB_PCI
tristate
select RT2X00_LIB
config RT2X00_LIB_USB
tristate
select RT2X00_LIB
config RT2X00_LIB_FIRMWARE
boolean
depends on RT2X00_LIB
select FW_LOADER
config RT2X00_LIB_CRYPTO
boolean
depends on RT2X00_LIB
config RT2X00_LIB_RFKILL
boolean
depends on RT2X00_LIB
select RFKILL
config RT2X00_LIB_LEDS
boolean
depends on RT2X00_LIB && NEW_LEDS
config RT2400PCI
tristate "Ralink rt2400 (PCI/PCMCIA) support"
depends on PCI
select RT2X00_LIB_PCI
select EEPROM_93CX6
---help---
This adds support for rt2400 wireless chipset family.
Supported chips: RT2460.
When compiled as a module, this driver will be called "rt2400pci.ko".
config RT2400PCI_RFKILL
bool "Ralink rt2400 rfkill support"
depends on RT2400PCI
select RT2X00_LIB_RFKILL
---help---
This adds support for integrated rt2400 hardware that features a
hardware button to control the radio state.
This feature depends on the RF switch subsystem rfkill.
config RT2400PCI_LEDS
bool "Ralink rt2400 leds support"
depends on RT2400PCI && NEW_LEDS
select LEDS_CLASS
select RT2X00_LIB_LEDS
---help---
This adds support for led triggers provided my mac80211.
config RT2500PCI
tristate "Ralink rt2500 (PCI/PCMCIA) support"
depends on PCI
select RT2X00_LIB_PCI
select EEPROM_93CX6
---help---
This adds support for rt2500 wireless chipset family.
Supported chips: RT2560.
When compiled as a module, this driver will be called "rt2500pci.ko".
config RT2500PCI_RFKILL
bool "Ralink rt2500 rfkill support"
depends on RT2500PCI
select RT2X00_LIB_RFKILL
---help---
This adds support for integrated rt2500 hardware that features a
hardware button to control the radio state.
This feature depends on the RF switch subsystem rfkill.
config RT2500PCI_LEDS
bool "Ralink rt2500 leds support"
depends on RT2500PCI && NEW_LEDS
select LEDS_CLASS
select RT2X00_LIB_LEDS
---help---
This adds support for led triggers provided my mac80211.
config RT61PCI
tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support"
depends on PCI
select RT2X00_LIB_PCI
select RT2X00_LIB_FIRMWARE
select CRC_ITU_T
select EEPROM_93CX6
---help---
This adds support for rt2501 wireless chipset family.
Supported chips: RT2561, RT2561S & RT2661.
When compiled as a module, this driver will be called "rt61pci.ko".
config RT61PCI_RFKILL
bool "Ralink rt2501/rt61 rfkill support"
depends on RT61PCI
select RT2X00_LIB_RFKILL
---help---
This adds support for integrated rt61 hardware that features a
hardware button to control the radio state.
This feature depends on the RF switch subsystem rfkill.
config RT61PCI_LEDS
bool "Ralink rt2501/rt61 leds support"
depends on RT61PCI && NEW_LEDS
select LEDS_CLASS
select RT2X00_LIB_LEDS
---help---
This adds support for led triggers provided my mac80211.
config RT2500USB
tristate "Ralink rt2500 (USB) support"
depends on USB
select RT2X00_LIB_USB
---help---
This adds support for rt2500 wireless chipset family.
Supported chips: RT2571 & RT2572.
When compiled as a module, this driver will be called "rt2500usb.ko".
config RT2500USB_LEDS
bool "Ralink rt2500 leds support"
depends on RT2500USB && NEW_LEDS
select LEDS_CLASS
select RT2X00_LIB_LEDS
---help---
This adds support for led triggers provided my mac80211.
config RT73USB
tristate "Ralink rt2501/rt73 (USB) support"
depends on USB
select RT2X00_LIB_USB
select RT2X00_LIB_FIRMWARE
select CRC_ITU_T
---help---
This adds support for rt2501 wireless chipset family.
Supported chips: RT2571W, RT2573 & RT2671.
When compiled as a module, this driver will be called "rt73usb.ko".
config RT73USB_LEDS
bool "Ralink rt2501/rt73 leds support"
depends on RT73USB && NEW_LEDS
select LEDS_CLASS
select RT2X00_LIB_LEDS
---help---
This adds support for led triggers provided my mac80211.
config RT2X00_LIB_DEBUGFS
bool "Ralink debugfs support"
depends on RT2X00_LIB && MAC80211_DEBUGFS
---help---
Enable creation of debugfs files for the rt2x00 drivers.
These debugfs files support both reading and writing of the
most important register types of the rt2x00 hardware.
config RT2X00_DEBUG
bool "Ralink debug output"
depends on RT2X00_LIB
---help---
Enable debugging output for all rt2x00 modules
endif