5d740fe9fe
Following patch removes EXPERIMENTAL flag from some of I2C bus and chip drivers. It is removed when the driver is in kernel at least from 2.6.3 and I generally think there is no problem with it. Also this patch adds SiS 745 to help option of sis96x and it also fixes nForce2 driver entry to reflect current state. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
501 lines
15 KiB
Plaintext
501 lines
15 KiB
Plaintext
#
|
|
# Sensor device configuration
|
|
#
|
|
|
|
menu "I2C Hardware Bus support"
|
|
depends on I2C
|
|
|
|
config I2C_ALI1535
|
|
tristate "ALI 1535"
|
|
depends on I2C && PCI
|
|
help
|
|
If you say yes to this option, support will be included for the SMB
|
|
Host controller on Acer Labs Inc. (ALI) M1535 South Bridges. The SMB
|
|
controller is part of the 7101 device, which is an ACPI-compliant
|
|
Power Management Unit (PMU).
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-ali1535.
|
|
|
|
config I2C_ALI1563
|
|
tristate "ALI 1563"
|
|
depends on I2C && PCI && EXPERIMENTAL
|
|
help
|
|
If you say yes to this option, support will be included for the SMB
|
|
Host controller on Acer Labs Inc. (ALI) M1563 South Bridges. The SMB
|
|
controller is part of the 7101 device, which is an ACPI-compliant
|
|
Power Management Unit (PMU).
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-ali1563.
|
|
|
|
config I2C_ALI15X3
|
|
tristate "ALI 15x3"
|
|
depends on I2C && PCI
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
Acer Labs Inc. (ALI) M1514 and M1543 motherboard I2C interfaces.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-ali15x3.
|
|
|
|
config I2C_AMD756
|
|
tristate "AMD 756/766/768/8111 and nVidia nForce"
|
|
depends on I2C && PCI
|
|
help
|
|
If you say yes to this option, support will be included for the AMD
|
|
756/766/768 mainboard I2C interfaces. The driver also includes
|
|
support for the first (SMBus 1.0) I2C interface of the AMD 8111 and
|
|
the nVidia nForce I2C interface.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-amd756.
|
|
|
|
config I2C_AMD756_S4882
|
|
tristate "SMBus multiplexing on the Tyan S4882"
|
|
depends on I2C_AMD756 && EXPERIMENTAL
|
|
help
|
|
Enabling this option will add specific SMBus support for the Tyan
|
|
S4882 motherboard. On this 4-CPU board, the SMBus is multiplexed
|
|
over 8 different channels, where the various memory module EEPROMs
|
|
and temperature sensors live. Saying yes here will give you access
|
|
to these in addition to the trunk.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-amd756-s4882.
|
|
|
|
config I2C_AMD8111
|
|
tristate "AMD 8111"
|
|
depends on I2C && PCI
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
second (SMBus 2.0) AMD 8111 mainboard I2C interface.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-amd8111.
|
|
|
|
config I2C_AU1550
|
|
tristate "Au1550 SMBus interface"
|
|
depends on I2C && SOC_AU1550
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
Au1550 SMBus interface.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-au1550.
|
|
|
|
config I2C_ELEKTOR
|
|
tristate "Elektor ISA card"
|
|
depends on I2C && ISA && BROKEN_ON_SMP
|
|
select I2C_ALGOPCF
|
|
help
|
|
This supports the PCF8584 ISA bus I2C adapter. Say Y if you own
|
|
such an adapter.
|
|
|
|
This support is also available as a module. If so, the module
|
|
will be called i2c-elektor.
|
|
|
|
config I2C_HYDRA
|
|
tristate "CHRP Apple Hydra Mac I/O I2C interface"
|
|
depends on I2C && PCI && PPC_CHRP && EXPERIMENTAL
|
|
select I2C_ALGOBIT
|
|
help
|
|
This supports the use of the I2C interface in the Apple Hydra Mac
|
|
I/O chip on some CHRP machines (e.g. the LongTrail). Say Y if you
|
|
have such a machine.
|
|
|
|
This support is also available as a module. If so, the module
|
|
will be called i2c-hydra.
|
|
|
|
config I2C_I801
|
|
tristate "Intel 82801 (ICH)"
|
|
depends on I2C && PCI
|
|
help
|
|
If you say yes to this option, support will be included for the Intel
|
|
801 family of mainboard I2C interfaces. Specifically, the following
|
|
versions of the chipset are supported:
|
|
82801AA
|
|
82801AB
|
|
82801BA
|
|
82801CA/CAM
|
|
82801DB
|
|
82801EB/ER (ICH5/ICH5R)
|
|
6300ESB
|
|
ICH6
|
|
ICH7
|
|
ESB2
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-i801.
|
|
|
|
config I2C_I810
|
|
tristate "Intel 810/815"
|
|
depends on I2C && PCI
|
|
select I2C_ALGOBIT
|
|
help
|
|
If you say yes to this option, support will be included for the Intel
|
|
810/815 family of mainboard I2C interfaces. Specifically, the
|
|
following versions of the chipset is supported:
|
|
i810AA
|
|
i810AB
|
|
i810E
|
|
i815
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-i810.
|
|
|
|
config I2C_PIIX4
|
|
tristate "Intel PIIX4"
|
|
depends on I2C && PCI
|
|
help
|
|
If you say yes to this option, support will be included for the Intel
|
|
PIIX4 family of mainboard I2C interfaces. Specifically, the following
|
|
versions of the chipset are supported:
|
|
Intel PIIX4
|
|
Intel 440MX
|
|
Serverworks OSB4
|
|
Serverworks CSB5
|
|
Serverworks CSB6
|
|
SMSC Victory66
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-piix4.
|
|
|
|
config I2C_IBM_IIC
|
|
tristate "IBM PPC 4xx on-chip I2C interface"
|
|
depends on IBM_OCP && I2C
|
|
help
|
|
Say Y here if you want to use IIC peripheral found on
|
|
embedded IBM PPC 4xx based systems.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-ibm_iic.
|
|
|
|
config I2C_IOP3XX
|
|
tristate "Intel IOP3xx and IXP4xx on-chip I2C interface"
|
|
depends on (ARCH_IOP3XX || ARCH_IXP4XX) && I2C
|
|
help
|
|
Say Y here if you want to use the IIC bus controller on
|
|
the Intel IOP3xx I/O Processors or IXP4xx Network Processors.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-iop3xx.
|
|
|
|
config I2C_ISA
|
|
tristate "ISA Bus support"
|
|
depends on I2C
|
|
help
|
|
If you say yes to this option, support will be included for i2c
|
|
interfaces that are on the ISA bus.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-isa.
|
|
|
|
config I2C_ITE
|
|
tristate "ITE I2C Adapter"
|
|
depends on I2C && MIPS_ITE8172
|
|
select I2C_ALGOITE
|
|
help
|
|
This supports the ITE8172 I2C peripheral found on some MIPS
|
|
systems. Say Y if you have one of these. You should also say Y for
|
|
the ITE I2C driver algorithm support above.
|
|
|
|
This support is also available as a module. If so, the module
|
|
will be called i2c-ite.
|
|
|
|
config I2C_IXP4XX
|
|
tristate "IXP4xx GPIO-Based I2C Interface"
|
|
depends on I2C && ARCH_IXP4XX
|
|
select I2C_ALGOBIT
|
|
help
|
|
Say Y here if you have an Intel IXP4xx(420,421,422,425) based
|
|
system and are using GPIO lines for an I2C bus.
|
|
|
|
This support is also available as a module. If so, the module
|
|
will be called i2c-ixp4xx.
|
|
|
|
config I2C_IXP2000
|
|
tristate "IXP2000 GPIO-Based I2C Interface"
|
|
depends on I2C && ARCH_IXP2000
|
|
select I2C_ALGOBIT
|
|
help
|
|
Say Y here if you have an Intel IXP2000(2400, 2800, 2850) based
|
|
system and are using GPIO lines for an I2C bus.
|
|
|
|
This support is also available as a module. If so, the module
|
|
will be called i2c-ixp2000.
|
|
|
|
config I2C_KEYWEST
|
|
tristate "Powermac Keywest I2C interface"
|
|
depends on I2C && PPC_PMAC
|
|
help
|
|
This supports the use of the I2C interface in the combo-I/O
|
|
chip on recent Apple machines. Say Y if you have such a machine.
|
|
|
|
This support is also available as a module. If so, the module
|
|
will be called i2c-keywest.
|
|
|
|
config I2C_MPC
|
|
tristate "MPC107/824x/85xx/52xx"
|
|
depends on I2C && PPC32
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and
|
|
MPC85xx family processors. The driver may also work on 52xx
|
|
family processors, though interrupts are known not to work.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-mpc.
|
|
|
|
config I2C_NFORCE2
|
|
tristate "Nvidia nForce2, nForce3 and nForce4"
|
|
depends on I2C && PCI
|
|
help
|
|
If you say yes to this option, support will be included for the Nvidia
|
|
nForce2, nForce3 and nForce4 families of mainboard I2C interfaces.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-nforce2.
|
|
|
|
config I2C_PARPORT
|
|
tristate "Parallel port adapter"
|
|
depends on I2C && PARPORT
|
|
select I2C_ALGOBIT
|
|
help
|
|
This supports parallel port I2C adapters such as the ones made by
|
|
Philips or Velleman, Analog Devices evaluation boards, and more.
|
|
Basically any adapter using the parallel port as an I2C bus with
|
|
no extra chipset is supported by this driver, or could be.
|
|
|
|
This driver is a replacement for (and was inspired by) an older
|
|
driver named i2c-philips-par. The new driver supports more devices,
|
|
and makes it easier to add support for new devices.
|
|
|
|
Another driver exists, named i2c-parport-light, which doesn't depend
|
|
on the parport driver. This is meant for embedded systems. Don't say
|
|
Y here if you intend to say Y or M there.
|
|
|
|
This support is also available as a module. If so, the module
|
|
will be called i2c-parport.
|
|
|
|
config I2C_PARPORT_LIGHT
|
|
tristate "Parallel port adapter (light)"
|
|
depends on I2C
|
|
select I2C_ALGOBIT
|
|
help
|
|
This supports parallel port I2C adapters such as the ones made by
|
|
Philips or Velleman, Analog Devices evaluation boards, and more.
|
|
Basically any adapter using the parallel port as an I2C bus with
|
|
no extra chipset is supported by this driver, or could be.
|
|
|
|
This driver is a light version of i2c-parport. It doesn't depend
|
|
on the parport driver, and uses direct I/O access instead. This
|
|
might be prefered on embedded systems where wasting memory for
|
|
the clean but heavy parport handling is not an option. The
|
|
drawback is a reduced portability and the impossibility to
|
|
dasiy-chain other parallel port devices.
|
|
|
|
Don't say Y here if you said Y or M to i2c-parport. Saying M to
|
|
both is possible but both modules should not be loaded at the same
|
|
time.
|
|
|
|
This support is also available as a module. If so, the module
|
|
will be called i2c-parport-light.
|
|
|
|
config I2C_PROSAVAGE
|
|
tristate "S3/VIA (Pro)Savage"
|
|
depends on I2C && PCI
|
|
select I2C_ALGOBIT
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
I2C bus and DDC bus of the S3VIA embedded Savage4 and ProSavage8
|
|
graphics processors.
|
|
chipsets supported:
|
|
S3/VIA KM266/VT8375 aka ProSavage8
|
|
S3/VIA KM133/VT8365 aka Savage4
|
|
|
|
This support is also available as a module. If so, the module
|
|
will be called i2c-prosavage.
|
|
|
|
config I2C_RPXLITE
|
|
tristate "Embedded Planet RPX Lite/Classic support"
|
|
depends on (RPXLITE || RPXCLASSIC) && I2C
|
|
select I2C_ALGO8XX
|
|
|
|
config I2C_S3C2410
|
|
tristate "S3C2410 I2C Driver"
|
|
depends on I2C && ARCH_S3C2410
|
|
help
|
|
Say Y here to include support for I2C controller in the
|
|
Samsung S3C2410 based System-on-Chip devices.
|
|
|
|
config I2C_SAVAGE4
|
|
tristate "S3 Savage 4"
|
|
depends on I2C && PCI && EXPERIMENTAL
|
|
select I2C_ALGOBIT
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
S3 Savage 4 I2C interface.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-savage4.
|
|
|
|
config I2C_SIBYTE
|
|
tristate "SiByte SMBus interface"
|
|
depends on SIBYTE_SB1xxx_SOC && I2C
|
|
help
|
|
Supports the SiByte SOC on-chip I2C interfaces (2 channels).
|
|
|
|
config SCx200_I2C
|
|
tristate "NatSemi SCx200 I2C using GPIO pins"
|
|
depends on SCx200_GPIO && I2C
|
|
select I2C_ALGOBIT
|
|
help
|
|
Enable the use of two GPIO pins of a SCx200 processor as an I2C bus.
|
|
|
|
If you don't know what to do here, say N.
|
|
|
|
This support is also available as a module. If so, the module
|
|
will be called scx200_i2c.
|
|
|
|
config SCx200_I2C_SCL
|
|
int "GPIO pin used for SCL"
|
|
depends on SCx200_I2C
|
|
default "12"
|
|
help
|
|
Enter the GPIO pin number used for the SCL signal. This value can
|
|
also be specified with a module parameter.
|
|
|
|
config SCx200_I2C_SDA
|
|
int "GPIO pin used for SDA"
|
|
depends on SCx200_I2C
|
|
default "13"
|
|
help
|
|
Enter the GPIO pin number used for the SSA signal. This value can
|
|
also be specified with a module parameter.
|
|
|
|
config SCx200_ACB
|
|
tristate "NatSemi SCx200 ACCESS.bus"
|
|
depends on I2C && PCI
|
|
help
|
|
Enable the use of the ACCESS.bus controllers of a SCx200 processor.
|
|
|
|
If you don't know what to do here, say N.
|
|
|
|
This support is also available as a module. If so, the module
|
|
will be called scx200_acb.
|
|
|
|
config I2C_SIS5595
|
|
tristate "SiS 5595"
|
|
depends on I2C && PCI
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
SiS5595 SMBus (a subset of I2C) interface.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-sis5595.
|
|
|
|
config I2C_SIS630
|
|
tristate "SiS 630/730"
|
|
depends on I2C && PCI
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
SiS630 and SiS730 SMBus (a subset of I2C) interface.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-sis630.
|
|
|
|
config I2C_SIS96X
|
|
tristate "SiS 96x"
|
|
depends on I2C && PCI
|
|
help
|
|
If you say yes to this option, support will be included for the SiS
|
|
96x SMBus (a subset of I2C) interfaces. Specifically, the following
|
|
chipsets are supported:
|
|
645/961
|
|
645DX/961
|
|
645DX/962
|
|
648/961
|
|
650/961
|
|
735
|
|
745
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-sis96x.
|
|
|
|
config I2C_STUB
|
|
tristate "I2C/SMBus Test Stub"
|
|
depends on I2C && EXPERIMENTAL && 'm'
|
|
default 'n'
|
|
help
|
|
This module may be useful to developers of SMBus client drivers,
|
|
especially for certain kinds of sensor chips.
|
|
|
|
If you do build this module, be sure to read the notes and warnings
|
|
in <file:Documentation/i2c/i2c-stub>.
|
|
|
|
If you don't know what to do here, definitely say N.
|
|
|
|
config I2C_VIA
|
|
tristate "VIA 82C586B"
|
|
depends on I2C && PCI && EXPERIMENTAL
|
|
select I2C_ALGOBIT
|
|
help
|
|
If you say yes to this option, support will be included for the VIA
|
|
82C586B I2C interface
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-via.
|
|
|
|
config I2C_VIAPRO
|
|
tristate "VIA 82C596/82C686/823x"
|
|
depends on I2C && PCI
|
|
help
|
|
If you say yes to this option, support will be included for the VIA
|
|
82C596/82C686/823x I2C interfaces. Specifically, the following
|
|
chipsets are supported:
|
|
82C596A/B
|
|
82C686A/B
|
|
8231
|
|
8233
|
|
8233A
|
|
8235
|
|
8237
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-viapro.
|
|
|
|
config I2C_VOODOO3
|
|
tristate "Voodoo 3"
|
|
depends on I2C && PCI
|
|
select I2C_ALGOBIT
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
Voodoo 3 I2C interface.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-voodoo3.
|
|
|
|
config I2C_PCA_ISA
|
|
tristate "PCA9564 on an ISA bus"
|
|
depends on I2C
|
|
select I2C_ALGOPCA
|
|
help
|
|
This driver supports ISA boards using the Philips PCA 9564
|
|
Parallel bus to I2C bus controller
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-pca-isa.
|
|
|
|
config I2C_MV64XXX
|
|
tristate "Marvell mv64xxx I2C Controller"
|
|
depends on I2C && MV64X60 && EXPERIMENTAL
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
built-in I2C interface on the Marvell 64xxx line of host bridges.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-mv64xxx.
|
|
|
|
endmenu
|