b47f407bef
move ath5k_tx_status and ath5k_rx_status structures out of the hardware descriptor since they are not accessed by the hardware at all. they just contain converted information from the hardware descriptor. since they are only used in the rx and tx tasklets there is also no use to keep them for each descriptor. drivers/net/wireless/ath5k/ath5k.h: Changes-licensed-under: ISC drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD drivers/net/wireless/ath5k/debug.c: Changes-licensed-under: GPL drivers/net/wireless/ath5k/debug.h: Changes-licensed-under: GPL drivers/net/wireless/ath5k/hw.c: Changes-licensed-under: ISC Signed-off-by: Bruno Randolf <bruno@thinktube.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
1171 lines
40 KiB
C
1171 lines
40 KiB
C
/*
|
|
* Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
|
|
* Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com>
|
|
*
|
|
* Permission to use, copy, modify, and distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#ifndef _ATH5K_H
|
|
#define _ATH5K_H
|
|
|
|
/* Set this to 1 to disable regulatory domain restrictions for channel tests.
|
|
* WARNING: This is for debuging only and has side effects (eg. scan takes too
|
|
* long and results timeouts). It's also illegal to tune to some of the
|
|
* supported frequencies in some countries, so use this at your own risk,
|
|
* you've been warned. */
|
|
#define CHAN_DEBUG 0
|
|
|
|
#include <linux/io.h>
|
|
#include <linux/types.h>
|
|
#include <net/mac80211.h>
|
|
|
|
#include "hw.h"
|
|
|
|
/* PCI IDs */
|
|
#define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */
|
|
#define PCI_DEVICE_ID_ATHEROS_AR5311 0x0011 /* AR5311 */
|
|
#define PCI_DEVICE_ID_ATHEROS_AR5211 0x0012 /* AR5211 */
|
|
#define PCI_DEVICE_ID_ATHEROS_AR5212 0x0013 /* AR5212 */
|
|
#define PCI_DEVICE_ID_3COM_3CRDAG675 0x0013 /* 3CRDAG675 (Atheros AR5212) */
|
|
#define PCI_DEVICE_ID_3COM_2_3CRPAG175 0x0013 /* 3CRPAG175 (Atheros AR5212) */
|
|
#define PCI_DEVICE_ID_ATHEROS_AR5210_AP 0x0207 /* AR5210 (Early) */
|
|
#define PCI_DEVICE_ID_ATHEROS_AR5212_IBM 0x1014 /* AR5212 (IBM MiniPCI) */
|
|
#define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT 0x1107 /* AR5210 (no eeprom) */
|
|
#define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT 0x1113 /* AR5212 (no eeprom) */
|
|
#define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT 0x1112 /* AR5211 (no eeprom) */
|
|
#define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA 0xf013 /* AR5212 (emulation board) */
|
|
#define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY 0xff12 /* AR5211 (emulation board) */
|
|
#define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B 0xf11b /* AR5211 (emulation board) */
|
|
#define PCI_DEVICE_ID_ATHEROS_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
|
|
#define PCI_DEVICE_ID_ATHEROS_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
|
|
#define PCI_DEVICE_ID_ATHEROS_AR5312_REV8 0x0058 /* AR5312 WMAC (AP43-030) */
|
|
#define PCI_DEVICE_ID_ATHEROS_AR5212_0014 0x0014 /* AR5212 compatible */
|
|
#define PCI_DEVICE_ID_ATHEROS_AR5212_0015 0x0015 /* AR5212 compatible */
|
|
#define PCI_DEVICE_ID_ATHEROS_AR5212_0016 0x0016 /* AR5212 compatible */
|
|
#define PCI_DEVICE_ID_ATHEROS_AR5212_0017 0x0017 /* AR5212 compatible */
|
|
#define PCI_DEVICE_ID_ATHEROS_AR5212_0018 0x0018 /* AR5212 compatible */
|
|
#define PCI_DEVICE_ID_ATHEROS_AR5212_0019 0x0019 /* AR5212 compatible */
|
|
#define PCI_DEVICE_ID_ATHEROS_AR2413 0x001a /* AR2413 (Griffin-lite) */
|
|
#define PCI_DEVICE_ID_ATHEROS_AR5413 0x001b /* AR5413 (Eagle) */
|
|
#define PCI_DEVICE_ID_ATHEROS_AR5424 0x001c /* AR5424 (Condor PCI-E) */
|
|
#define PCI_DEVICE_ID_ATHEROS_AR5416 0x0023 /* AR5416 */
|
|
#define PCI_DEVICE_ID_ATHEROS_AR5418 0x0024 /* AR5418 */
|
|
|
|
/****************************\
|
|
GENERIC DRIVER DEFINITIONS
|
|
\****************************/
|
|
|
|
#define ATH5K_PRINTF(fmt, ...) printk("%s: " fmt, __func__, ##__VA_ARGS__)
|
|
|
|
#define ATH5K_PRINTK(_sc, _level, _fmt, ...) \
|
|
printk(_level "ath5k %s: " _fmt, \
|
|
((_sc) && (_sc)->hw) ? wiphy_name((_sc)->hw->wiphy) : "", \
|
|
##__VA_ARGS__)
|
|
|
|
#define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) do { \
|
|
if (net_ratelimit()) \
|
|
ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \
|
|
} while (0)
|
|
|
|
#define ATH5K_INFO(_sc, _fmt, ...) \
|
|
ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__)
|
|
|
|
#define ATH5K_WARN(_sc, _fmt, ...) \
|
|
ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__)
|
|
|
|
#define ATH5K_ERR(_sc, _fmt, ...) \
|
|
ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__)
|
|
|
|
/*
|
|
* Some tuneable values (these should be changeable by the user)
|
|
*/
|
|
#define AR5K_TUNE_DMA_BEACON_RESP 2
|
|
#define AR5K_TUNE_SW_BEACON_RESP 10
|
|
#define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF 0
|
|
#define AR5K_TUNE_RADAR_ALERT false
|
|
#define AR5K_TUNE_MIN_TX_FIFO_THRES 1
|
|
#define AR5K_TUNE_MAX_TX_FIFO_THRES ((IEEE80211_MAX_LEN / 64) + 1)
|
|
#define AR5K_TUNE_REGISTER_TIMEOUT 20000
|
|
/* Register for RSSI threshold has a mask of 0xff, so 255 seems to
|
|
* be the max value. */
|
|
#define AR5K_TUNE_RSSI_THRES 129
|
|
/* This must be set when setting the RSSI threshold otherwise it can
|
|
* prevent a reset. If AR5K_RSSI_THR is read after writing to it
|
|
* the BMISS_THRES will be seen as 0, seems harware doesn't keep
|
|
* track of it. Max value depends on harware. For AR5210 this is just 7.
|
|
* For AR5211+ this seems to be up to 255. */
|
|
#define AR5K_TUNE_BMISS_THRES 7
|
|
#define AR5K_TUNE_REGISTER_DWELL_TIME 20000
|
|
#define AR5K_TUNE_BEACON_INTERVAL 100
|
|
#define AR5K_TUNE_AIFS 2
|
|
#define AR5K_TUNE_AIFS_11B 2
|
|
#define AR5K_TUNE_AIFS_XR 0
|
|
#define AR5K_TUNE_CWMIN 15
|
|
#define AR5K_TUNE_CWMIN_11B 31
|
|
#define AR5K_TUNE_CWMIN_XR 3
|
|
#define AR5K_TUNE_CWMAX 1023
|
|
#define AR5K_TUNE_CWMAX_11B 1023
|
|
#define AR5K_TUNE_CWMAX_XR 7
|
|
#define AR5K_TUNE_NOISE_FLOOR -72
|
|
#define AR5K_TUNE_MAX_TXPOWER 60
|
|
#define AR5K_TUNE_DEFAULT_TXPOWER 30
|
|
#define AR5K_TUNE_TPC_TXPOWER true
|
|
#define AR5K_TUNE_ANT_DIVERSITY true
|
|
#define AR5K_TUNE_HWTXTRIES 4
|
|
|
|
/* token to use for aifs, cwmin, cwmax in MadWiFi */
|
|
#define AR5K_TXQ_USEDEFAULT ((u32) -1)
|
|
|
|
/* GENERIC CHIPSET DEFINITIONS */
|
|
|
|
/* MAC Chips */
|
|
enum ath5k_version {
|
|
AR5K_AR5210 = 0,
|
|
AR5K_AR5211 = 1,
|
|
AR5K_AR5212 = 2,
|
|
};
|
|
|
|
/* PHY Chips */
|
|
enum ath5k_radio {
|
|
AR5K_RF5110 = 0,
|
|
AR5K_RF5111 = 1,
|
|
AR5K_RF5112 = 2,
|
|
AR5K_RF2413 = 3,
|
|
AR5K_RF5413 = 4,
|
|
};
|
|
|
|
/*
|
|
* Common silicon revision/version values
|
|
*/
|
|
|
|
enum ath5k_srev_type {
|
|
AR5K_VERSION_VER,
|
|
AR5K_VERSION_RAD,
|
|
};
|
|
|
|
struct ath5k_srev_name {
|
|
const char *sr_name;
|
|
enum ath5k_srev_type sr_type;
|
|
u_int sr_val;
|
|
};
|
|
|
|
#define AR5K_SREV_UNKNOWN 0xffff
|
|
|
|
#define AR5K_SREV_VER_AR5210 0x00
|
|
#define AR5K_SREV_VER_AR5311 0x10
|
|
#define AR5K_SREV_VER_AR5311A 0x20
|
|
#define AR5K_SREV_VER_AR5311B 0x30
|
|
#define AR5K_SREV_VER_AR5211 0x40
|
|
#define AR5K_SREV_VER_AR5212 0x50
|
|
#define AR5K_SREV_VER_AR5213 0x55
|
|
#define AR5K_SREV_VER_AR5213A 0x59
|
|
#define AR5K_SREV_VER_AR2413 0x78
|
|
#define AR5K_SREV_VER_AR2414 0x79
|
|
#define AR5K_SREV_VER_AR2424 0xa0 /* PCI-E */
|
|
#define AR5K_SREV_VER_AR5424 0xa3 /* PCI-E */
|
|
#define AR5K_SREV_VER_AR5413 0xa4
|
|
#define AR5K_SREV_VER_AR5414 0xa5
|
|
#define AR5K_SREV_VER_AR5416 0xc0 /* PCI-E */
|
|
#define AR5K_SREV_VER_AR5418 0xca /* PCI-E */
|
|
#define AR5K_SREV_VER_AR2425 0xe2 /* PCI-E */
|
|
|
|
#define AR5K_SREV_RAD_5110 0x00
|
|
#define AR5K_SREV_RAD_5111 0x10
|
|
#define AR5K_SREV_RAD_5111A 0x15
|
|
#define AR5K_SREV_RAD_2111 0x20
|
|
#define AR5K_SREV_RAD_5112 0x30
|
|
#define AR5K_SREV_RAD_5112A 0x35
|
|
#define AR5K_SREV_RAD_2112 0x40
|
|
#define AR5K_SREV_RAD_2112A 0x45
|
|
#define AR5K_SREV_RAD_SC0 0x56 /* Found on 2413/2414 */
|
|
#define AR5K_SREV_RAD_SC1 0x63 /* Found on 5413/5414 */
|
|
#define AR5K_SREV_RAD_SC2 0xa2 /* Found on 2424-5/5424 */
|
|
#define AR5K_SREV_RAD_5133 0xc0 /* MIMO found on 5418 */
|
|
|
|
/* IEEE defs */
|
|
|
|
#define IEEE80211_MAX_LEN 2500
|
|
|
|
/* TODO add support to mac80211 for vendor-specific rates and modes */
|
|
|
|
/*
|
|
* Some of this information is based on Documentation from:
|
|
*
|
|
* http://madwifi.org/wiki/ChipsetFeatures/SuperAG
|
|
*
|
|
* Modulation for Atheros' eXtended Range - range enhancing extension that is
|
|
* supposed to double the distance an Atheros client device can keep a
|
|
* connection with an Atheros access point. This is achieved by increasing
|
|
* the receiver sensitivity up to, -105dBm, which is about 20dB above what
|
|
* the 802.11 specifications demand. In addition, new (proprietary) data rates
|
|
* are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s.
|
|
*
|
|
* Please note that can you either use XR or TURBO but you cannot use both,
|
|
* they are exclusive.
|
|
*
|
|
*/
|
|
#define MODULATION_XR 0x00000200
|
|
/*
|
|
* Modulation for Atheros' Turbo G and Turbo A, its supposed to provide a
|
|
* throughput transmission speed up to 40Mbit/s-60Mbit/s at a 108Mbit/s
|
|
* signaling rate achieved through the bonding of two 54Mbit/s 802.11g
|
|
* channels. To use this feature your Access Point must also suport it.
|
|
* There is also a distinction between "static" and "dynamic" turbo modes:
|
|
*
|
|
* - Static: is the dumb version: devices set to this mode stick to it until
|
|
* the mode is turned off.
|
|
* - Dynamic: is the intelligent version, the network decides itself if it
|
|
* is ok to use turbo. As soon as traffic is detected on adjacent channels
|
|
* (which would get used in turbo mode), or when a non-turbo station joins
|
|
* the network, turbo mode won't be used until the situation changes again.
|
|
* Dynamic mode is achieved by Atheros' Adaptive Radio (AR) feature which
|
|
* monitors the used radio band in order to decide whether turbo mode may
|
|
* be used or not.
|
|
*
|
|
* This article claims Super G sticks to bonding of channels 5 and 6 for
|
|
* USA:
|
|
*
|
|
* http://www.pcworld.com/article/id,113428-page,1/article.html
|
|
*
|
|
* The channel bonding seems to be driver specific though. In addition to
|
|
* deciding what channels will be used, these "Turbo" modes are accomplished
|
|
* by also enabling the following features:
|
|
*
|
|
* - Bursting: allows multiple frames to be sent at once, rather than pausing
|
|
* after each frame. Bursting is a standards-compliant feature that can be
|
|
* used with any Access Point.
|
|
* - Fast frames: increases the amount of information that can be sent per
|
|
* frame, also resulting in a reduction of transmission overhead. It is a
|
|
* proprietary feature that needs to be supported by the Access Point.
|
|
* - Compression: data frames are compressed in real time using a Lempel Ziv
|
|
* algorithm. This is done transparently. Once this feature is enabled,
|
|
* compression and decompression takes place inside the chipset, without
|
|
* putting additional load on the host CPU.
|
|
*
|
|
*/
|
|
#define MODULATION_TURBO 0x00000080
|
|
|
|
enum ath5k_driver_mode {
|
|
AR5K_MODE_11A = 0,
|
|
AR5K_MODE_11A_TURBO = 1,
|
|
AR5K_MODE_11B = 2,
|
|
AR5K_MODE_11G = 3,
|
|
AR5K_MODE_11G_TURBO = 4,
|
|
AR5K_MODE_XR = 0,
|
|
AR5K_MODE_MAX = 5
|
|
};
|
|
|
|
/* adding this flag to rate_code enables short preamble, see ar5212_reg.h */
|
|
#define AR5K_SET_SHORT_PREAMBLE 0x04
|
|
|
|
#define HAS_SHPREAMBLE(_ix) \
|
|
(rt->rates[_ix].modulation == IEEE80211_RATE_SHORT_PREAMBLE)
|
|
#define SHPREAMBLE_FLAG(_ix) \
|
|
(HAS_SHPREAMBLE(_ix) ? AR5K_SET_SHORT_PREAMBLE : 0)
|
|
|
|
|
|
/****************\
|
|
TX DEFINITIONS
|
|
\****************/
|
|
|
|
/*
|
|
* TX Status
|
|
*/
|
|
struct ath5k_tx_status {
|
|
u16 ts_seqnum;
|
|
u16 ts_tstamp;
|
|
u8 ts_status;
|
|
u8 ts_rate;
|
|
s8 ts_rssi;
|
|
u8 ts_shortretry;
|
|
u8 ts_longretry;
|
|
u8 ts_virtcol;
|
|
u8 ts_antenna;
|
|
};
|
|
|
|
#define AR5K_TXSTAT_ALTRATE 0x80
|
|
#define AR5K_TXERR_XRETRY 0x01
|
|
#define AR5K_TXERR_FILT 0x02
|
|
#define AR5K_TXERR_FIFO 0x04
|
|
|
|
/**
|
|
* enum ath5k_tx_queue - Queue types used to classify tx queues.
|
|
* @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue
|
|
* @AR5K_TX_QUEUE_DATA: A normal data queue
|
|
* @AR5K_TX_QUEUE_XR_DATA: An XR-data queue
|
|
* @AR5K_TX_QUEUE_BEACON: The beacon queue
|
|
* @AR5K_TX_QUEUE_CAB: The after-beacon queue
|
|
* @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue
|
|
*/
|
|
enum ath5k_tx_queue {
|
|
AR5K_TX_QUEUE_INACTIVE = 0,
|
|
AR5K_TX_QUEUE_DATA,
|
|
AR5K_TX_QUEUE_XR_DATA,
|
|
AR5K_TX_QUEUE_BEACON,
|
|
AR5K_TX_QUEUE_CAB,
|
|
AR5K_TX_QUEUE_UAPSD,
|
|
};
|
|
|
|
#define AR5K_NUM_TX_QUEUES 10
|
|
#define AR5K_NUM_TX_QUEUES_NOQCU 2
|
|
|
|
/*
|
|
* Queue syb-types to classify normal data queues.
|
|
* These are the 4 Access Categories as defined in
|
|
* WME spec. 0 is the lowest priority and 4 is the
|
|
* highest. Normal data that hasn't been classified
|
|
* goes to the Best Effort AC.
|
|
*/
|
|
enum ath5k_tx_queue_subtype {
|
|
AR5K_WME_AC_BK = 0, /*Background traffic*/
|
|
AR5K_WME_AC_BE, /*Best-effort (normal) traffic)*/
|
|
AR5K_WME_AC_VI, /*Video traffic*/
|
|
AR5K_WME_AC_VO, /*Voice traffic*/
|
|
};
|
|
|
|
/*
|
|
* Queue ID numbers as returned by the hw functions, each number
|
|
* represents a hw queue. If hw does not support hw queues
|
|
* (eg 5210) all data goes in one queue. These match
|
|
* d80211 definitions (net80211/MadWiFi don't use them).
|
|
*/
|
|
enum ath5k_tx_queue_id {
|
|
AR5K_TX_QUEUE_ID_NOQCU_DATA = 0,
|
|
AR5K_TX_QUEUE_ID_NOQCU_BEACON = 1,
|
|
AR5K_TX_QUEUE_ID_DATA_MIN = 0, /*IEEE80211_TX_QUEUE_DATA0*/
|
|
AR5K_TX_QUEUE_ID_DATA_MAX = 4, /*IEEE80211_TX_QUEUE_DATA4*/
|
|
AR5K_TX_QUEUE_ID_DATA_SVP = 5, /*IEEE80211_TX_QUEUE_SVP - Spectralink Voice Protocol*/
|
|
AR5K_TX_QUEUE_ID_CAB = 6, /*IEEE80211_TX_QUEUE_AFTER_BEACON*/
|
|
AR5K_TX_QUEUE_ID_BEACON = 7, /*IEEE80211_TX_QUEUE_BEACON*/
|
|
AR5K_TX_QUEUE_ID_UAPSD = 8,
|
|
AR5K_TX_QUEUE_ID_XR_DATA = 9,
|
|
};
|
|
|
|
|
|
/*
|
|
* Flags to set hw queue's parameters...
|
|
*/
|
|
#define AR5K_TXQ_FLAG_TXOKINT_ENABLE 0x0001 /* Enable TXOK interrupt */
|
|
#define AR5K_TXQ_FLAG_TXERRINT_ENABLE 0x0002 /* Enable TXERR interrupt */
|
|
#define AR5K_TXQ_FLAG_TXEOLINT_ENABLE 0x0004 /* Enable TXEOL interrupt -not used- */
|
|
#define AR5K_TXQ_FLAG_TXDESCINT_ENABLE 0x0008 /* Enable TXDESC interrupt -not used- */
|
|
#define AR5K_TXQ_FLAG_TXURNINT_ENABLE 0x0010 /* Enable TXURN interrupt */
|
|
#define AR5K_TXQ_FLAG_BACKOFF_DISABLE 0x0020 /* Disable random post-backoff */
|
|
#define AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE 0x0040 /* Enable ready time expiry policy (?)*/
|
|
#define AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE 0x0080 /* Enable backoff while bursting */
|
|
#define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS 0x0100 /* Disable backoff while bursting */
|
|
#define AR5K_TXQ_FLAG_COMPRESSION_ENABLE 0x0200 /* Enable hw compression -not implemented-*/
|
|
|
|
/*
|
|
* A struct to hold tx queue's parameters
|
|
*/
|
|
struct ath5k_txq_info {
|
|
enum ath5k_tx_queue tqi_type;
|
|
enum ath5k_tx_queue_subtype tqi_subtype;
|
|
u16 tqi_flags; /* Tx queue flags (see above) */
|
|
u32 tqi_aifs; /* Arbitrated Interframe Space */
|
|
s32 tqi_cw_min; /* Minimum Contention Window */
|
|
s32 tqi_cw_max; /* Maximum Contention Window */
|
|
u32 tqi_cbr_period; /* Constant bit rate period */
|
|
u32 tqi_cbr_overflow_limit;
|
|
u32 tqi_burst_time;
|
|
u32 tqi_ready_time; /* Not used */
|
|
};
|
|
|
|
/*
|
|
* Transmit packet types.
|
|
* These are not fully used inside OpenHAL yet
|
|
*/
|
|
enum ath5k_pkt_type {
|
|
AR5K_PKT_TYPE_NORMAL = 0,
|
|
AR5K_PKT_TYPE_ATIM = 1,
|
|
AR5K_PKT_TYPE_PSPOLL = 2,
|
|
AR5K_PKT_TYPE_BEACON = 3,
|
|
AR5K_PKT_TYPE_PROBE_RESP = 4,
|
|
AR5K_PKT_TYPE_PIFS = 5,
|
|
};
|
|
|
|
/*
|
|
* TX power and TPC settings
|
|
*/
|
|
#define AR5K_TXPOWER_OFDM(_r, _v) ( \
|
|
((0 & 1) << ((_v) + 6)) | \
|
|
(((ah->ah_txpower.txp_rates[(_r)]) & 0x3f) << (_v)) \
|
|
)
|
|
|
|
#define AR5K_TXPOWER_CCK(_r, _v) ( \
|
|
(ah->ah_txpower.txp_rates[(_r)] & 0x3f) << (_v) \
|
|
)
|
|
|
|
/*
|
|
* DMA size definitions (2^n+2)
|
|
*/
|
|
enum ath5k_dmasize {
|
|
AR5K_DMASIZE_4B = 0,
|
|
AR5K_DMASIZE_8B,
|
|
AR5K_DMASIZE_16B,
|
|
AR5K_DMASIZE_32B,
|
|
AR5K_DMASIZE_64B,
|
|
AR5K_DMASIZE_128B,
|
|
AR5K_DMASIZE_256B,
|
|
AR5K_DMASIZE_512B
|
|
};
|
|
|
|
|
|
/****************\
|
|
RX DEFINITIONS
|
|
\****************/
|
|
|
|
/*
|
|
* RX Status
|
|
*/
|
|
struct ath5k_rx_status {
|
|
u16 rs_datalen;
|
|
u16 rs_tstamp;
|
|
u8 rs_status;
|
|
u8 rs_phyerr;
|
|
s8 rs_rssi;
|
|
u8 rs_keyix;
|
|
u8 rs_rate;
|
|
u8 rs_antenna;
|
|
u8 rs_more;
|
|
};
|
|
|
|
#define AR5K_RXERR_CRC 0x01
|
|
#define AR5K_RXERR_PHY 0x02
|
|
#define AR5K_RXERR_FIFO 0x04
|
|
#define AR5K_RXERR_DECRYPT 0x08
|
|
#define AR5K_RXERR_MIC 0x10
|
|
#define AR5K_RXKEYIX_INVALID ((u8) - 1)
|
|
#define AR5K_TXKEYIX_INVALID ((u32) - 1)
|
|
|
|
struct ath5k_mib_stats {
|
|
u32 ackrcv_bad;
|
|
u32 rts_bad;
|
|
u32 rts_good;
|
|
u32 fcs_bad;
|
|
u32 beacons;
|
|
};
|
|
|
|
|
|
/**************************\
|
|
BEACON TIMERS DEFINITIONS
|
|
\**************************/
|
|
|
|
#define AR5K_BEACON_PERIOD 0x0000ffff
|
|
#define AR5K_BEACON_ENA 0x00800000 /*enable beacon xmit*/
|
|
#define AR5K_BEACON_RESET_TSF 0x01000000 /*force a TSF reset*/
|
|
|
|
#if 0
|
|
/**
|
|
* struct ath5k_beacon_state - Per-station beacon timer state.
|
|
* @bs_interval: in TU's, can also include the above flags
|
|
* @bs_cfp_max_duration: if non-zero hw is setup to coexist with a
|
|
* Point Coordination Function capable AP
|
|
*/
|
|
struct ath5k_beacon_state {
|
|
u32 bs_next_beacon;
|
|
u32 bs_next_dtim;
|
|
u32 bs_interval;
|
|
u8 bs_dtim_period;
|
|
u8 bs_cfp_period;
|
|
u16 bs_cfp_max_duration;
|
|
u16 bs_cfp_du_remain;
|
|
u16 bs_tim_offset;
|
|
u16 bs_sleep_duration;
|
|
u16 bs_bmiss_threshold;
|
|
u32 bs_cfp_next;
|
|
};
|
|
#endif
|
|
|
|
|
|
/*
|
|
* TSF to TU conversion:
|
|
*
|
|
* TSF is a 64bit value in usec (microseconds).
|
|
* TU is a 32bit value and defined by IEEE802.11 (page 6) as "A measurement of
|
|
* time equal to 1024 usec", so it's roughly milliseconds (usec / 1024).
|
|
*/
|
|
#define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10)
|
|
|
|
|
|
/********************\
|
|
COMMON DEFINITIONS
|
|
\********************/
|
|
|
|
/*
|
|
* Atheros hardware descriptor
|
|
* This is read and written to by the hardware
|
|
*/
|
|
struct ath5k_desc {
|
|
u32 ds_link; /* physical address of the next descriptor */
|
|
u32 ds_data; /* physical address of data buffer (skb) */
|
|
|
|
union {
|
|
struct ath5k_hw_5210_tx_desc ds_tx5210;
|
|
struct ath5k_hw_5212_tx_desc ds_tx5212;
|
|
struct ath5k_hw_all_rx_desc ds_rx;
|
|
} ud;
|
|
} __packed;
|
|
|
|
#define AR5K_RXDESC_INTREQ 0x0020
|
|
|
|
#define AR5K_TXDESC_CLRDMASK 0x0001
|
|
#define AR5K_TXDESC_NOACK 0x0002 /*[5211+]*/
|
|
#define AR5K_TXDESC_RTSENA 0x0004
|
|
#define AR5K_TXDESC_CTSENA 0x0008
|
|
#define AR5K_TXDESC_INTREQ 0x0010
|
|
#define AR5K_TXDESC_VEOL 0x0020 /*[5211+]*/
|
|
|
|
#define AR5K_SLOT_TIME_9 396
|
|
#define AR5K_SLOT_TIME_20 880
|
|
#define AR5K_SLOT_TIME_MAX 0xffff
|
|
|
|
/* channel_flags */
|
|
#define CHANNEL_CW_INT 0x0008 /* Contention Window interference detected */
|
|
#define CHANNEL_TURBO 0x0010 /* Turbo Channel */
|
|
#define CHANNEL_CCK 0x0020 /* CCK channel */
|
|
#define CHANNEL_OFDM 0x0040 /* OFDM channel */
|
|
#define CHANNEL_2GHZ 0x0080 /* 2GHz channel. */
|
|
#define CHANNEL_5GHZ 0x0100 /* 5GHz channel */
|
|
#define CHANNEL_PASSIVE 0x0200 /* Only passive scan allowed */
|
|
#define CHANNEL_DYN 0x0400 /* Dynamic CCK-OFDM channel (for g operation) */
|
|
#define CHANNEL_XR 0x0800 /* XR channel */
|
|
|
|
#define CHANNEL_A (CHANNEL_5GHZ|CHANNEL_OFDM)
|
|
#define CHANNEL_B (CHANNEL_2GHZ|CHANNEL_CCK)
|
|
#define CHANNEL_G (CHANNEL_2GHZ|CHANNEL_OFDM)
|
|
#define CHANNEL_T (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_TURBO)
|
|
#define CHANNEL_TG (CHANNEL_2GHZ|CHANNEL_OFDM|CHANNEL_TURBO)
|
|
#define CHANNEL_108A CHANNEL_T
|
|
#define CHANNEL_108G CHANNEL_TG
|
|
#define CHANNEL_X (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_XR)
|
|
|
|
#define CHANNEL_ALL (CHANNEL_OFDM|CHANNEL_CCK|CHANNEL_2GHZ|CHANNEL_5GHZ| \
|
|
CHANNEL_TURBO)
|
|
|
|
#define CHANNEL_ALL_NOTURBO (CHANNEL_ALL & ~CHANNEL_TURBO)
|
|
#define CHANNEL_MODES CHANNEL_ALL
|
|
|
|
/*
|
|
* Used internaly in OpenHAL (ar5211.c/ar5212.c
|
|
* for reset_tx_queue). Also see struct struct ieee80211_channel.
|
|
*/
|
|
#define IS_CHAN_XR(_c) ((_c.hw_value & CHANNEL_XR) != 0)
|
|
#define IS_CHAN_B(_c) ((_c.hw_value & CHANNEL_B) != 0)
|
|
|
|
/*
|
|
* The following structure will be used to map 2GHz channels to
|
|
* 5GHz Atheros channels.
|
|
*/
|
|
struct ath5k_athchan_2ghz {
|
|
u32 a2_flags;
|
|
u16 a2_athchan;
|
|
};
|
|
|
|
/*
|
|
* Rate definitions
|
|
* TODO: Clean them up or move them on mac80211 -most of these infos are
|
|
* used by the rate control algorytm on MadWiFi.
|
|
*/
|
|
|
|
/* Max number of rates on the rate table and what it seems
|
|
* Atheros hardware supports */
|
|
#define AR5K_MAX_RATES 32
|
|
|
|
/**
|
|
* struct ath5k_rate - rate structure
|
|
* @valid: is this a valid rate for rate control (remove)
|
|
* @modulation: respective mac80211 modulation
|
|
* @rate_kbps: rate in kbit/s
|
|
* @rate_code: hardware rate value, used in &struct ath5k_desc, on RX on
|
|
* &struct ath5k_rx_status.rs_rate and on TX on
|
|
* &struct ath5k_tx_status.ts_rate. Seems the ar5xxx harware supports
|
|
* up to 32 rates, indexed by 1-32. This means we really only need
|
|
* 6 bits for the rate_code.
|
|
* @dot11_rate: respective IEEE-802.11 rate value
|
|
* @control_rate: index of rate assumed to be used to send control frames.
|
|
* This can be used to set override the value on the rate duration
|
|
* registers. This is only useful if we can override in the harware at
|
|
* what rate we want to send control frames at. Note that IEEE-802.11
|
|
* Ch. 9.6 (after IEEE 802.11g changes) defines the rate at which we
|
|
* should send ACK/CTS, if we change this value we can be breaking
|
|
* the spec.
|
|
*
|
|
* This structure is used to get the RX rate or set the TX rate on the
|
|
* hardware descriptors. It is also used for internal modulation control
|
|
* and settings.
|
|
*
|
|
* On RX after the &struct ath5k_desc is parsed by the appropriate
|
|
* ah_proc_rx_desc() the respective hardware rate value is set in
|
|
* &struct ath5k_rx_status.rs_rate. On TX the desired rate is set in
|
|
* &struct ath5k_tx_status.ts_rate which is later used to setup the
|
|
* &struct ath5k_desc correctly. This is the hardware rate map we are
|
|
* aware of:
|
|
*
|
|
* rate_code 1 2 3 4 5 6 7 8
|
|
* rate_kbps 3000 1000 ? ? ? 2000 500 48000
|
|
*
|
|
* rate_code 9 10 11 12 13 14 15 16
|
|
* rate_kbps 24000 12000 6000 54000 36000 18000 9000 ?
|
|
*
|
|
* rate_code 17 18 19 20 21 22 23 24
|
|
* rate_kbps ? ? ? ? ? ? ? 11000
|
|
*
|
|
* rate_code 25 26 27 28 29 30 31 32
|
|
* rate_kbps 5500 2000 1000 ? ? ? ? ?
|
|
*
|
|
*/
|
|
struct ath5k_rate {
|
|
u8 valid;
|
|
u32 modulation;
|
|
u16 rate_kbps;
|
|
u8 rate_code;
|
|
u8 dot11_rate;
|
|
u8 control_rate;
|
|
};
|
|
|
|
/* XXX: GRR all this stuff to get leds blinking ??? (check out setcurmode) */
|
|
struct ath5k_rate_table {
|
|
u16 rate_count;
|
|
u8 rate_code_to_index[AR5K_MAX_RATES]; /* Back-mapping */
|
|
struct ath5k_rate rates[AR5K_MAX_RATES];
|
|
};
|
|
|
|
/*
|
|
* Rate tables...
|
|
* TODO: CLEAN THIS !!!
|
|
*/
|
|
#define AR5K_RATES_11A { 8, { \
|
|
255, 255, 255, 255, 255, 255, 255, 255, 6, 4, 2, 0, \
|
|
7, 5, 3, 1, 255, 255, 255, 255, 255, 255, 255, 255, \
|
|
255, 255, 255, 255, 255, 255, 255, 255 }, { \
|
|
{ 1, 0, 6000, 11, 140, 0 }, \
|
|
{ 1, 0, 9000, 15, 18, 0 }, \
|
|
{ 1, 0, 12000, 10, 152, 2 }, \
|
|
{ 1, 0, 18000, 14, 36, 2 }, \
|
|
{ 1, 0, 24000, 9, 176, 4 }, \
|
|
{ 1, 0, 36000, 13, 72, 4 }, \
|
|
{ 1, 0, 48000, 8, 96, 4 }, \
|
|
{ 1, 0, 54000, 12, 108, 4 } } \
|
|
}
|
|
|
|
#define AR5K_RATES_11B { 4, { \
|
|
255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, \
|
|
255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, \
|
|
3, 2, 1, 0, 255, 255, 255, 255 }, { \
|
|
{ 1, 0, 1000, 27, 130, 0 }, \
|
|
{ 1, IEEE80211_RATE_SHORT_PREAMBLE, 2000, 26, 132, 1 }, \
|
|
{ 1, IEEE80211_RATE_SHORT_PREAMBLE, 5500, 25, 139, 1 }, \
|
|
{ 1, IEEE80211_RATE_SHORT_PREAMBLE, 11000, 24, 150, 1 } } \
|
|
}
|
|
|
|
#define AR5K_RATES_11G { 12, { \
|
|
255, 255, 255, 255, 255, 255, 255, 255, 10, 8, 6, 4, \
|
|
11, 9, 7, 5, 255, 255, 255, 255, 255, 255, 255, 255, \
|
|
3, 2, 1, 0, 255, 255, 255, 255 }, { \
|
|
{ 1, 0, 1000, 27, 2, 0 }, \
|
|
{ 1, IEEE80211_RATE_SHORT_PREAMBLE, 2000, 26, 4, 1 }, \
|
|
{ 1, IEEE80211_RATE_SHORT_PREAMBLE, 5500, 25, 11, 1 }, \
|
|
{ 1, IEEE80211_RATE_SHORT_PREAMBLE, 11000, 24, 22, 1 }, \
|
|
{ 0, 0, 6000, 11, 12, 4 }, \
|
|
{ 0, 0, 9000, 15, 18, 4 }, \
|
|
{ 1, 0, 12000, 10, 24, 6 }, \
|
|
{ 1, 0, 18000, 14, 36, 6 }, \
|
|
{ 1, 0, 24000, 9, 48, 8 }, \
|
|
{ 1, 0, 36000, 13, 72, 8 }, \
|
|
{ 1, 0, 48000, 8, 96, 8 }, \
|
|
{ 1, 0, 54000, 12, 108, 8 } } \
|
|
}
|
|
|
|
#define AR5K_RATES_TURBO { 8, { \
|
|
255, 255, 255, 255, 255, 255, 255, 255, 6, 4, 2, 0, \
|
|
7, 5, 3, 1, 255, 255, 255, 255, 255, 255, 255, 255, \
|
|
255, 255, 255, 255, 255, 255, 255, 255 }, { \
|
|
{ 1, MODULATION_TURBO, 6000, 11, 140, 0 }, \
|
|
{ 1, MODULATION_TURBO, 9000, 15, 18, 0 }, \
|
|
{ 1, MODULATION_TURBO, 12000, 10, 152, 2 }, \
|
|
{ 1, MODULATION_TURBO, 18000, 14, 36, 2 }, \
|
|
{ 1, MODULATION_TURBO, 24000, 9, 176, 4 }, \
|
|
{ 1, MODULATION_TURBO, 36000, 13, 72, 4 }, \
|
|
{ 1, MODULATION_TURBO, 48000, 8, 96, 4 }, \
|
|
{ 1, MODULATION_TURBO, 54000, 12, 108, 4 } } \
|
|
}
|
|
|
|
#define AR5K_RATES_XR { 12, { \
|
|
255, 3, 1, 255, 255, 255, 2, 0, 10, 8, 6, 4, \
|
|
11, 9, 7, 5, 255, 255, 255, 255, 255, 255, 255, 255, \
|
|
255, 255, 255, 255, 255, 255, 255, 255 }, { \
|
|
{ 1, MODULATION_XR, 500, 7, 129, 0 }, \
|
|
{ 1, MODULATION_XR, 1000, 2, 139, 1 }, \
|
|
{ 1, MODULATION_XR, 2000, 6, 150, 2 }, \
|
|
{ 1, MODULATION_XR, 3000, 1, 150, 3 }, \
|
|
{ 1, 0, 6000, 11, 140, 4 }, \
|
|
{ 1, 0, 9000, 15, 18, 4 }, \
|
|
{ 1, 0, 12000, 10, 152, 6 }, \
|
|
{ 1, 0, 18000, 14, 36, 6 }, \
|
|
{ 1, 0, 24000, 9, 176, 8 }, \
|
|
{ 1, 0, 36000, 13, 72, 8 }, \
|
|
{ 1, 0, 48000, 8, 96, 8 }, \
|
|
{ 1, 0, 54000, 12, 108, 8 } } \
|
|
}
|
|
|
|
/*
|
|
* Crypto definitions
|
|
*/
|
|
|
|
#define AR5K_KEYCACHE_SIZE 8
|
|
|
|
/***********************\
|
|
HW RELATED DEFINITIONS
|
|
\***********************/
|
|
|
|
/*
|
|
* Misc definitions
|
|
*/
|
|
#define AR5K_RSSI_EP_MULTIPLIER (1<<7)
|
|
|
|
#define AR5K_ASSERT_ENTRY(_e, _s) do { \
|
|
if (_e >= _s) \
|
|
return (false); \
|
|
} while (0)
|
|
|
|
|
|
enum ath5k_ant_setting {
|
|
AR5K_ANT_VARIABLE = 0, /* variable by programming */
|
|
AR5K_ANT_FIXED_A = 1, /* fixed to 11a frequencies */
|
|
AR5K_ANT_FIXED_B = 2, /* fixed to 11b frequencies */
|
|
AR5K_ANT_MAX = 3,
|
|
};
|
|
|
|
/*
|
|
* Hardware interrupt abstraction
|
|
*/
|
|
|
|
/**
|
|
* enum ath5k_int - Hardware interrupt masks helpers
|
|
*
|
|
* @AR5K_INT_RX: mask to identify received frame interrupts, of type
|
|
* AR5K_ISR_RXOK or AR5K_ISR_RXERR
|
|
* @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor (?)
|
|
* @AR5K_INT_RXNOFRM: No frame received (?)
|
|
* @AR5K_INT_RXEOL: received End Of List for VEOL (Virtual End Of List). The
|
|
* Queue Control Unit (QCU) signals an EOL interrupt only if a descriptor's
|
|
* LinkPtr is NULL. For more details, refer to:
|
|
* http://www.freepatentsonline.com/20030225739.html
|
|
* @AR5K_INT_RXORN: Indicates we got RX overrun (eg. no more descriptors).
|
|
* Note that Rx overrun is not always fatal, on some chips we can continue
|
|
* operation without reseting the card, that's why int_fatal is not
|
|
* common for all chips.
|
|
* @AR5K_INT_TX: mask to identify received frame interrupts, of type
|
|
* AR5K_ISR_TXOK or AR5K_ISR_TXERR
|
|
* @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor (?)
|
|
* @AR5K_INT_TXURN: received when we should increase the TX trigger threshold
|
|
* We currently do increments on interrupt by
|
|
* (AR5K_TUNE_MAX_TX_FIFO_THRES - current_trigger_level) / 2
|
|
* @AR5K_INT_MIB: Indicates the Management Information Base counters should be
|
|
* checked. We should do this with ath5k_hw_update_mib_counters() but
|
|
* it seems we should also then do some noise immunity work.
|
|
* @AR5K_INT_RXPHY: RX PHY Error
|
|
* @AR5K_INT_RXKCM: ??
|
|
* @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a
|
|
* beacon that must be handled in software. The alternative is if you
|
|
* have VEOL support, in that case you let the hardware deal with things.
|
|
* @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing
|
|
* beacons from the AP have associated with, we should probably try to
|
|
* reassociate. When in IBSS mode this might mean we have not received
|
|
* any beacons from any local stations. Note that every station in an
|
|
* IBSS schedules to send beacons at the Target Beacon Transmission Time
|
|
* (TBTT) with a random backoff.
|
|
* @AR5K_INT_BNR: Beacon Not Ready interrupt - ??
|
|
* @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill, disabled for now
|
|
* until properly handled
|
|
* @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by DMA
|
|
* errors. These types of errors we can enable seem to be of type
|
|
* AR5K_SIMR2_MCABT, AR5K_SIMR2_SSERR and AR5K_SIMR2_DPERR.
|
|
* @AR5K_INT_GLOBAL: Seems to be used to clear and set the IER
|
|
* @AR5K_INT_NOCARD: signals the card has been removed
|
|
* @AR5K_INT_COMMON: common interrupts shared amogst MACs with the same
|
|
* bit value
|
|
*
|
|
* These are mapped to take advantage of some common bits
|
|
* between the MACs, to be able to set intr properties
|
|
* easier. Some of them are not used yet inside hw.c. Most map
|
|
* to the respective hw interrupt value as they are common amogst different
|
|
* MACs.
|
|
*/
|
|
enum ath5k_int {
|
|
AR5K_INT_RX = 0x00000001, /* Not common */
|
|
AR5K_INT_RXDESC = 0x00000002,
|
|
AR5K_INT_RXNOFRM = 0x00000008,
|
|
AR5K_INT_RXEOL = 0x00000010,
|
|
AR5K_INT_RXORN = 0x00000020,
|
|
AR5K_INT_TX = 0x00000040, /* Not common */
|
|
AR5K_INT_TXDESC = 0x00000080,
|
|
AR5K_INT_TXURN = 0x00000800,
|
|
AR5K_INT_MIB = 0x00001000,
|
|
AR5K_INT_RXPHY = 0x00004000,
|
|
AR5K_INT_RXKCM = 0x00008000,
|
|
AR5K_INT_SWBA = 0x00010000,
|
|
AR5K_INT_BMISS = 0x00040000,
|
|
AR5K_INT_BNR = 0x00100000, /* Not common */
|
|
AR5K_INT_GPIO = 0x01000000,
|
|
AR5K_INT_FATAL = 0x40000000, /* Not common */
|
|
AR5K_INT_GLOBAL = 0x80000000,
|
|
|
|
AR5K_INT_COMMON = AR5K_INT_RXNOFRM
|
|
| AR5K_INT_RXDESC
|
|
| AR5K_INT_RXEOL
|
|
| AR5K_INT_RXORN
|
|
| AR5K_INT_TXURN
|
|
| AR5K_INT_TXDESC
|
|
| AR5K_INT_MIB
|
|
| AR5K_INT_RXPHY
|
|
| AR5K_INT_RXKCM
|
|
| AR5K_INT_SWBA
|
|
| AR5K_INT_BMISS
|
|
| AR5K_INT_GPIO,
|
|
AR5K_INT_NOCARD = 0xffffffff
|
|
};
|
|
|
|
/*
|
|
* Power management
|
|
*/
|
|
enum ath5k_power_mode {
|
|
AR5K_PM_UNDEFINED = 0,
|
|
AR5K_PM_AUTO,
|
|
AR5K_PM_AWAKE,
|
|
AR5K_PM_FULL_SLEEP,
|
|
AR5K_PM_NETWORK_SLEEP,
|
|
};
|
|
|
|
/*
|
|
* These match net80211 definitions (not used in
|
|
* d80211).
|
|
*/
|
|
#define AR5K_LED_INIT 0 /*IEEE80211_S_INIT*/
|
|
#define AR5K_LED_SCAN 1 /*IEEE80211_S_SCAN*/
|
|
#define AR5K_LED_AUTH 2 /*IEEE80211_S_AUTH*/
|
|
#define AR5K_LED_ASSOC 3 /*IEEE80211_S_ASSOC*/
|
|
#define AR5K_LED_RUN 4 /*IEEE80211_S_RUN*/
|
|
|
|
/* GPIO-controlled software LED */
|
|
#define AR5K_SOFTLED_PIN 0
|
|
#define AR5K_SOFTLED_ON 0
|
|
#define AR5K_SOFTLED_OFF 1
|
|
|
|
/*
|
|
* Chipset capabilities -see ath5k_hw_get_capability-
|
|
* get_capability function is not yet fully implemented
|
|
* in OpenHAL so most of these don't work yet...
|
|
*/
|
|
enum ath5k_capability_type {
|
|
AR5K_CAP_REG_DMN = 0, /* Used to get current reg. domain id */
|
|
AR5K_CAP_TKIP_MIC = 2, /* Can handle TKIP MIC in hardware */
|
|
AR5K_CAP_TKIP_SPLIT = 3, /* TKIP uses split keys */
|
|
AR5K_CAP_PHYCOUNTERS = 4, /* PHY error counters */
|
|
AR5K_CAP_DIVERSITY = 5, /* Supports fast diversity */
|
|
AR5K_CAP_NUM_TXQUEUES = 6, /* Used to get max number of hw txqueues */
|
|
AR5K_CAP_VEOL = 7, /* Supports virtual EOL */
|
|
AR5K_CAP_COMPRESSION = 8, /* Supports compression */
|
|
AR5K_CAP_BURST = 9, /* Supports packet bursting */
|
|
AR5K_CAP_FASTFRAME = 10, /* Supports fast frames */
|
|
AR5K_CAP_TXPOW = 11, /* Used to get global tx power limit */
|
|
AR5K_CAP_TPC = 12, /* Can do per-packet tx power control (needed for 802.11a) */
|
|
AR5K_CAP_BSSIDMASK = 13, /* Supports bssid mask */
|
|
AR5K_CAP_MCAST_KEYSRCH = 14, /* Supports multicast key search */
|
|
AR5K_CAP_TSF_ADJUST = 15, /* Supports beacon tsf adjust */
|
|
AR5K_CAP_XR = 16, /* Supports XR mode */
|
|
AR5K_CAP_WME_TKIPMIC = 17, /* Supports TKIP MIC when using WMM */
|
|
AR5K_CAP_CHAN_HALFRATE = 18, /* Supports half rate channels */
|
|
AR5K_CAP_CHAN_QUARTERRATE = 19, /* Supports quarter rate channels */
|
|
AR5K_CAP_RFSILENT = 20, /* Supports RFsilent */
|
|
};
|
|
|
|
|
|
/* XXX: we *may* move cap_range stuff to struct wiphy */
|
|
struct ath5k_capabilities {
|
|
/*
|
|
* Supported PHY modes
|
|
* (ie. CHANNEL_A, CHANNEL_B, ...)
|
|
*/
|
|
DECLARE_BITMAP(cap_mode, AR5K_MODE_MAX);
|
|
|
|
/*
|
|
* Frequency range (without regulation restrictions)
|
|
*/
|
|
struct {
|
|
u16 range_2ghz_min;
|
|
u16 range_2ghz_max;
|
|
u16 range_5ghz_min;
|
|
u16 range_5ghz_max;
|
|
} cap_range;
|
|
|
|
/*
|
|
* Values stored in the EEPROM (some of them...)
|
|
*/
|
|
struct ath5k_eeprom_info cap_eeprom;
|
|
|
|
/*
|
|
* Queue information
|
|
*/
|
|
struct {
|
|
u8 q_tx_num;
|
|
} cap_queues;
|
|
};
|
|
|
|
|
|
/***************************************\
|
|
HARDWARE ABSTRACTION LAYER STRUCTURE
|
|
\***************************************/
|
|
|
|
/*
|
|
* Misc defines
|
|
*/
|
|
|
|
#define AR5K_MAX_GPIO 10
|
|
#define AR5K_MAX_RF_BANKS 8
|
|
|
|
struct ath5k_hw {
|
|
u32 ah_magic;
|
|
|
|
struct ath5k_softc *ah_sc;
|
|
void __iomem *ah_iobase;
|
|
|
|
enum ath5k_int ah_imr;
|
|
|
|
enum ieee80211_if_types ah_op_mode;
|
|
enum ath5k_power_mode ah_power_mode;
|
|
struct ieee80211_channel ah_current_channel;
|
|
bool ah_turbo;
|
|
bool ah_calibration;
|
|
bool ah_running;
|
|
bool ah_single_chip;
|
|
enum ath5k_rfgain ah_rf_gain;
|
|
|
|
u32 ah_mac_srev;
|
|
u16 ah_mac_version;
|
|
u16 ah_mac_revision;
|
|
u16 ah_phy_revision;
|
|
u16 ah_radio_5ghz_revision;
|
|
u16 ah_radio_2ghz_revision;
|
|
u32 ah_phy_spending;
|
|
|
|
enum ath5k_version ah_version;
|
|
enum ath5k_radio ah_radio;
|
|
u32 ah_phy;
|
|
|
|
bool ah_5ghz;
|
|
bool ah_2ghz;
|
|
|
|
#define ah_regdomain ah_capabilities.cap_regdomain.reg_current
|
|
#define ah_regdomain_hw ah_capabilities.cap_regdomain.reg_hw
|
|
#define ah_modes ah_capabilities.cap_mode
|
|
#define ah_ee_version ah_capabilities.cap_eeprom.ee_version
|
|
|
|
u32 ah_atim_window;
|
|
u32 ah_aifs;
|
|
u32 ah_cw_min;
|
|
u32 ah_cw_max;
|
|
bool ah_software_retry;
|
|
u32 ah_limit_tx_retries;
|
|
|
|
u32 ah_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
|
|
bool ah_ant_diversity;
|
|
|
|
u8 ah_sta_id[ETH_ALEN];
|
|
|
|
/* Current BSSID we are trying to assoc to / creating.
|
|
* This is passed by mac80211 on config_interface() and cached here for
|
|
* use in resets */
|
|
u8 ah_bssid[ETH_ALEN];
|
|
|
|
u32 ah_gpio[AR5K_MAX_GPIO];
|
|
int ah_gpio_npins;
|
|
|
|
struct ath5k_capabilities ah_capabilities;
|
|
|
|
struct ath5k_txq_info ah_txq[AR5K_NUM_TX_QUEUES];
|
|
u32 ah_txq_status;
|
|
u32 ah_txq_imr_txok;
|
|
u32 ah_txq_imr_txerr;
|
|
u32 ah_txq_imr_txurn;
|
|
u32 ah_txq_imr_txdesc;
|
|
u32 ah_txq_imr_txeol;
|
|
u32 *ah_rf_banks;
|
|
size_t ah_rf_banks_size;
|
|
struct ath5k_gain ah_gain;
|
|
u32 ah_offset[AR5K_MAX_RF_BANKS];
|
|
|
|
struct {
|
|
u16 txp_pcdac[AR5K_EEPROM_POWER_TABLE_SIZE];
|
|
u16 txp_rates[AR5K_MAX_RATES];
|
|
s16 txp_min;
|
|
s16 txp_max;
|
|
bool txp_tpc;
|
|
s16 txp_ofdm;
|
|
} ah_txpower;
|
|
|
|
struct {
|
|
bool r_enabled;
|
|
int r_last_alert;
|
|
struct ieee80211_channel r_last_channel;
|
|
} ah_radar;
|
|
|
|
/* noise floor from last periodic calibration */
|
|
s32 ah_noise_floor;
|
|
|
|
/*
|
|
* Function pointers
|
|
*/
|
|
int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
|
|
unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int,
|
|
unsigned int, unsigned int, unsigned int, unsigned int,
|
|
unsigned int, unsigned int, unsigned int);
|
|
int (*ah_setup_xtx_desc)(struct ath5k_hw *, struct ath5k_desc *,
|
|
unsigned int, unsigned int, unsigned int, unsigned int,
|
|
unsigned int, unsigned int);
|
|
int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
|
|
struct ath5k_tx_status *);
|
|
int (*ah_proc_rx_desc)(struct ath5k_hw *, struct ath5k_desc *,
|
|
struct ath5k_rx_status *);
|
|
};
|
|
|
|
/*
|
|
* Prototypes
|
|
*/
|
|
|
|
/* General Functions */
|
|
extern int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, bool is_set);
|
|
/* Attach/Detach Functions */
|
|
extern struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version);
|
|
extern const struct ath5k_rate_table *ath5k_hw_get_rate_table(struct ath5k_hw *ah, unsigned int mode);
|
|
extern void ath5k_hw_detach(struct ath5k_hw *ah);
|
|
/* Reset Functions */
|
|
extern int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, struct ieee80211_channel *channel, bool change_channel);
|
|
/* Power management functions */
|
|
extern int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration);
|
|
/* DMA Related Functions */
|
|
extern void ath5k_hw_start_rx(struct ath5k_hw *ah);
|
|
extern int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah);
|
|
extern u32 ath5k_hw_get_rx_buf(struct ath5k_hw *ah);
|
|
extern void ath5k_hw_put_rx_buf(struct ath5k_hw *ah, u32 phys_addr);
|
|
extern int ath5k_hw_tx_start(struct ath5k_hw *ah, unsigned int queue);
|
|
extern int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue);
|
|
extern u32 ath5k_hw_get_tx_buf(struct ath5k_hw *ah, unsigned int queue);
|
|
extern int ath5k_hw_put_tx_buf(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr);
|
|
extern int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase);
|
|
/* Interrupt handling */
|
|
extern bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah);
|
|
extern int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask);
|
|
extern enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask);
|
|
/* EEPROM access functions */
|
|
extern int ath5k_hw_set_regdomain(struct ath5k_hw *ah, u16 regdomain);
|
|
/* Protocol Control Unit Functions */
|
|
extern int ath5k_hw_set_opmode(struct ath5k_hw *ah);
|
|
/* BSSID Functions */
|
|
extern void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac);
|
|
extern int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac);
|
|
extern void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id);
|
|
extern int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask);
|
|
/* Receive start/stop functions */
|
|
extern void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah);
|
|
extern void ath5k_hw_stop_pcu_recv(struct ath5k_hw *ah);
|
|
/* RX Filter functions */
|
|
extern void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1);
|
|
extern int ath5k_hw_set_mcast_filterindex(struct ath5k_hw *ah, u32 index);
|
|
extern int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index);
|
|
extern u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah);
|
|
extern void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter);
|
|
/* Beacon related functions */
|
|
extern u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah);
|
|
extern u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah);
|
|
extern void ath5k_hw_reset_tsf(struct ath5k_hw *ah);
|
|
extern void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval);
|
|
#if 0
|
|
extern int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah, const struct ath5k_beacon_state *state);
|
|
extern void ath5k_hw_reset_beacon(struct ath5k_hw *ah);
|
|
extern int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr);
|
|
#endif
|
|
extern void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, struct ath5k_mib_stats *statistics);
|
|
/* ACK bit rate */
|
|
void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high);
|
|
/* ACK/CTS Timeouts */
|
|
extern int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout);
|
|
extern unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah);
|
|
extern int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout);
|
|
extern unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah);
|
|
/* Key table (WEP) functions */
|
|
extern int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry);
|
|
extern int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry);
|
|
extern int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, const struct ieee80211_key_conf *key, const u8 *mac);
|
|
extern int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac);
|
|
/* Queue Control Unit, DFS Control Unit Functions */
|
|
extern int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, struct ath5k_txq_info *queue_info);
|
|
extern int ath5k_hw_setup_tx_queueprops(struct ath5k_hw *ah, int queue, const struct ath5k_txq_info *queue_info);
|
|
extern int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, struct ath5k_txq_info *queue_info);
|
|
extern void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue);
|
|
extern int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue);
|
|
extern u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue);
|
|
extern int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time);
|
|
extern unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah);
|
|
/* Hardware Descriptor Functions */
|
|
extern int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, u32 size, unsigned int flags);
|
|
/* GPIO Functions */
|
|
extern void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state);
|
|
extern int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio);
|
|
extern int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio);
|
|
extern u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio);
|
|
extern int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val);
|
|
extern void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level);
|
|
/* Misc functions */
|
|
extern int ath5k_hw_get_capability(struct ath5k_hw *ah, enum ath5k_capability_type cap_type, u32 capability, u32 *result);
|
|
|
|
|
|
/* Initial register settings functions */
|
|
extern int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel);
|
|
/* Initialize RF */
|
|
extern int ath5k_hw_rfregs(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int mode);
|
|
extern int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq);
|
|
extern enum ath5k_rfgain ath5k_hw_get_rf_gain(struct ath5k_hw *ah);
|
|
extern int ath5k_hw_set_rfgain_opt(struct ath5k_hw *ah);
|
|
|
|
|
|
/* PHY/RF channel functions */
|
|
extern bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags);
|
|
extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel);
|
|
/* PHY calibration */
|
|
extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel);
|
|
extern int ath5k_hw_phy_disable(struct ath5k_hw *ah);
|
|
/* Misc PHY functions */
|
|
extern u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan);
|
|
extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant);
|
|
extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah);
|
|
extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq);
|
|
/* TX power setup */
|
|
extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int txpower);
|
|
extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power);
|
|
|
|
|
|
static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
|
|
{
|
|
return ioread32(ah->ah_iobase + reg);
|
|
}
|
|
|
|
static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
|
|
{
|
|
iowrite32(val, ah->ah_iobase + reg);
|
|
}
|
|
|
|
#endif
|