4df64c3e58
Current device tree is only bare bones. This patch adds nodes to make
it a complete tree for the MPC5121ads.
Added nodes include:
mbx - opengl coprocessor
nfc - nand flash controller
cpld-pic - on board cpld
rtc
clock - clock control
pmc - power management control
gpio
mscan - can module
i2c
axe - audio coprocessor
display - display interface unit
mdio
ethernet
usb
ioctl - pin config
pata
ac97 - PSC configured as AC97
pscfifo - psc fifo configuration
dma
pci
Fix typo in header changing MDS to ADS.
Add a compatible property of the form "fsl,mpc5121-..."
to nodes missing one.
Changed localbus compatible to fsl,mpc5121-localbus, this does
not break anything because the only code that uses it finds it
via the node name, not compatible.
Signed-off-by: John Rigby <jrigby@freescale.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
411 lines
9.4 KiB
Plaintext
411 lines
9.4 KiB
Plaintext
/*
|
|
* MPC5121E ADS Device Tree Source
|
|
*
|
|
* Copyright 2007,2008 Freescale Semiconductor Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
/ {
|
|
model = "mpc5121ads";
|
|
compatible = "fsl,mpc5121ads";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
aliases {
|
|
pci = &pci;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
PowerPC,5121@0 {
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
d-cache-line-size = <0x20>; // 32 bytes
|
|
i-cache-line-size = <0x20>; // 32 bytes
|
|
d-cache-size = <0x8000>; // L1, 32K
|
|
i-cache-size = <0x8000>; // L1, 32K
|
|
timebase-frequency = <49500000>;// 49.5 MHz (csb/4)
|
|
bus-frequency = <198000000>; // 198 MHz csb bus
|
|
clock-frequency = <396000000>; // 396 MHz ppc core
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x10000000>; // 256MB at 0
|
|
};
|
|
|
|
mbx@20000000 {
|
|
compatible = "fsl,mpc5121-mbx";
|
|
reg = <0x20000000 0x4000>;
|
|
interrupts = <66 0x8>;
|
|
interrupt-parent = < &ipic >;
|
|
};
|
|
|
|
sram@30000000 {
|
|
compatible = "fsl,mpc5121-sram";
|
|
reg = <0x30000000 0x20000>; // 128K at 0x30000000
|
|
};
|
|
|
|
nfc@40000000 {
|
|
compatible = "fsl,mpc5121-nfc";
|
|
reg = <0x40000000 0x100000>; // 1M at 0x40000000
|
|
interrupts = <6 8>;
|
|
interrupt-parent = < &ipic >;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
bank-width = <1>;
|
|
// ADS has two Hynix 512MB Nand flash chips in a single
|
|
// stacked package .
|
|
chips = <2>;
|
|
nand0@0 {
|
|
label = "nand0";
|
|
reg = <0x00000000 0x02000000>; // first 32 MB of chip 0
|
|
};
|
|
nand1@20000000 {
|
|
label = "nand1";
|
|
reg = <0x20000000 0x02000000>; // first 32 MB of chip 1
|
|
};
|
|
};
|
|
|
|
localbus@80000020 {
|
|
compatible = "fsl,mpc5121-localbus";
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
reg = <0x80000020 0x40>;
|
|
|
|
ranges = <0x0 0x0 0xfc000000 0x04000000
|
|
0x2 0x0 0x82000000 0x00008000>;
|
|
|
|
flash@0,0 {
|
|
compatible = "cfi-flash";
|
|
reg = <0 0x0 0x4000000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
bank-width = <4>;
|
|
device-width = <2>;
|
|
protected@0 {
|
|
label = "protected";
|
|
reg = <0x00000000 0x00040000>; // first sector is protected
|
|
read-only;
|
|
};
|
|
filesystem@40000 {
|
|
label = "filesystem";
|
|
reg = <0x00040000 0x03c00000>; // 60M for filesystem
|
|
};
|
|
kernel@3c40000 {
|
|
label = "kernel";
|
|
reg = <0x03c40000 0x00280000>; // 2.5M for kernel
|
|
};
|
|
device-tree@3ec0000 {
|
|
label = "device-tree";
|
|
reg = <0x03ec0000 0x00040000>; // one sector for device tree
|
|
};
|
|
u-boot@3f00000 {
|
|
label = "u-boot";
|
|
reg = <0x03f00000 0x00100000>; // 1M for u-boot
|
|
read-only;
|
|
};
|
|
};
|
|
|
|
board-control@2,0 {
|
|
compatible = "fsl,mpc5121ads-cpld";
|
|
reg = <0x2 0x0 0x8000>;
|
|
};
|
|
|
|
cpld_pic: pic@2,a {
|
|
compatible = "fsl,mpc5121ads-cpld-pic";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x2 0xa 0x5>;
|
|
interrupt-parent = < &ipic >;
|
|
// irq routing
|
|
// all irqs but touch screen are routed to irq0 (ipic 48)
|
|
// touch screen is statically routed to irq1 (ipic 17)
|
|
// so don't use it here
|
|
interrupts = <48 0x8>;
|
|
};
|
|
};
|
|
|
|
soc@80000000 {
|
|
compatible = "fsl,mpc5121-immr";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
#interrupt-cells = <2>;
|
|
ranges = <0x0 0x80000000 0x400000>;
|
|
reg = <0x80000000 0x400000>;
|
|
bus-frequency = <66000000>; // 66 MHz ips bus
|
|
|
|
|
|
// IPIC
|
|
// interrupts cell = <intr #, sense>
|
|
// sense values match linux IORESOURCE_IRQ_* defines:
|
|
// sense == 8: Level, low assertion
|
|
// sense == 2: Edge, high-to-low change
|
|
//
|
|
ipic: interrupt-controller@c00 {
|
|
compatible = "fsl,mpc5121-ipic", "fsl,ipic";
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
reg = <0xc00 0x100>;
|
|
};
|
|
|
|
rtc@a00 { // Real time clock
|
|
compatible = "fsl,mpc5121-rtc";
|
|
reg = <0xa00 0x100>;
|
|
interrupts = <79 0x8 80 0x8>;
|
|
interrupt-parent = < &ipic >;
|
|
};
|
|
|
|
clock@f00 { // Clock control
|
|
compatible = "fsl,mpc5121-clock";
|
|
reg = <0xf00 0x100>;
|
|
};
|
|
|
|
pmc@1000{ //Power Management Controller
|
|
compatible = "fsl,mpc5121-pmc";
|
|
reg = <0x1000 0x100>;
|
|
interrupts = <83 0x2>;
|
|
interrupt-parent = < &ipic >;
|
|
};
|
|
|
|
gpio@1100 {
|
|
compatible = "fsl,mpc5121-gpio";
|
|
reg = <0x1100 0x100>;
|
|
interrupts = <78 0x8>;
|
|
interrupt-parent = < &ipic >;
|
|
};
|
|
|
|
mscan@1300 {
|
|
compatible = "fsl,mpc5121-mscan";
|
|
cell-index = <0>;
|
|
interrupts = <12 0x8>;
|
|
interrupt-parent = < &ipic >;
|
|
reg = <0x1300 0x80>;
|
|
};
|
|
|
|
mscan@1380 {
|
|
compatible = "fsl,mpc5121-mscan";
|
|
cell-index = <1>;
|
|
interrupts = <13 0x8>;
|
|
interrupt-parent = < &ipic >;
|
|
reg = <0x1380 0x80>;
|
|
};
|
|
|
|
i2c@1700 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,mpc5121-i2c", "fsl-i2c";
|
|
cell-index = <0>;
|
|
reg = <0x1700 0x20>;
|
|
interrupts = <9 0x8>;
|
|
interrupt-parent = < &ipic >;
|
|
fsl5200-clocking;
|
|
};
|
|
|
|
i2c@1720 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,mpc5121-i2c", "fsl-i2c";
|
|
cell-index = <1>;
|
|
reg = <0x1720 0x20>;
|
|
interrupts = <10 0x8>;
|
|
interrupt-parent = < &ipic >;
|
|
fsl5200-clocking;
|
|
};
|
|
|
|
i2c@1740 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,mpc5121-i2c", "fsl-i2c";
|
|
cell-index = <2>;
|
|
reg = <0x1740 0x20>;
|
|
interrupts = <11 0x8>;
|
|
interrupt-parent = < &ipic >;
|
|
fsl5200-clocking;
|
|
};
|
|
|
|
i2ccontrol@1760 {
|
|
compatible = "fsl,mpc5121-i2c-ctrl";
|
|
reg = <0x1760 0x8>;
|
|
};
|
|
|
|
axe@2000 {
|
|
compatible = "fsl,mpc5121-axe";
|
|
reg = <0x2000 0x100>;
|
|
interrupts = <42 0x8>;
|
|
interrupt-parent = < &ipic >;
|
|
};
|
|
|
|
display@2100 {
|
|
compatible = "fsl,mpc5121-diu", "fsl-diu";
|
|
reg = <0x2100 0x100>;
|
|
interrupts = <64 0x8>;
|
|
interrupt-parent = < &ipic >;
|
|
};
|
|
|
|
mdio@2800 {
|
|
compatible = "fsl,mpc5121-fec-mdio";
|
|
reg = <0x2800 0x800>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
phy: ethernet-phy@0 {
|
|
reg = <1>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
};
|
|
|
|
ethernet@2800 {
|
|
device_type = "network";
|
|
compatible = "fsl,mpc5121-fec";
|
|
reg = <0x2800 0x800>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupts = <4 0x8>;
|
|
interrupt-parent = < &ipic >;
|
|
phy-handle = < &phy >;
|
|
fsl,align-tx-packets = <4>;
|
|
};
|
|
|
|
// 5121e has two dr usb modules
|
|
// mpc5121_ads only uses USB0
|
|
|
|
// USB1 using external ULPI PHY
|
|
//usb@3000 {
|
|
// compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr";
|
|
// reg = <0x3000 0x1000>;
|
|
// #address-cells = <1>;
|
|
// #size-cells = <0>;
|
|
// interrupt-parent = < &ipic >;
|
|
// interrupts = <43 0x8>;
|
|
// dr_mode = "otg";
|
|
// phy_type = "ulpi";
|
|
// port1;
|
|
//};
|
|
|
|
// USB0 using internal UTMI PHY
|
|
usb@4000 {
|
|
compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr";
|
|
reg = <0x4000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupt-parent = < &ipic >;
|
|
interrupts = <44 0x8>;
|
|
dr_mode = "otg";
|
|
phy_type = "utmi_wide";
|
|
port0;
|
|
};
|
|
|
|
// IO control
|
|
ioctl@a000 {
|
|
compatible = "fsl,mpc5121-ioctl";
|
|
reg = <0xA000 0x1000>;
|
|
};
|
|
|
|
pata@10200 {
|
|
compatible = "fsl,mpc5121-pata";
|
|
reg = <0x10200 0x100>;
|
|
interrupts = <5 0x8>;
|
|
interrupt-parent = < &ipic >;
|
|
};
|
|
|
|
// 512x PSCs are not 52xx PSC compatible
|
|
// PSC3 serial port A aka ttyPSC0
|
|
serial@11300 {
|
|
device_type = "serial";
|
|
compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
|
|
// Logical port assignment needed until driver
|
|
// learns to use aliases
|
|
port-number = <0>;
|
|
cell-index = <3>;
|
|
reg = <0x11300 0x100>;
|
|
interrupts = <40 0x8>;
|
|
interrupt-parent = < &ipic >;
|
|
rx-fifo-size = <16>;
|
|
tx-fifo-size = <16>;
|
|
};
|
|
|
|
// PSC4 serial port B aka ttyPSC1
|
|
serial@11400 {
|
|
device_type = "serial";
|
|
compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
|
|
// Logical port assignment needed until driver
|
|
// learns to use aliases
|
|
port-number = <1>;
|
|
cell-index = <4>;
|
|
reg = <0x11400 0x100>;
|
|
interrupts = <40 0x8>;
|
|
interrupt-parent = < &ipic >;
|
|
rx-fifo-size = <16>;
|
|
tx-fifo-size = <16>;
|
|
};
|
|
|
|
// PSC5 in ac97 mode
|
|
ac97@11500 {
|
|
compatible = "fsl,mpc5121-psc-ac97", "fsl,mpc5121-psc";
|
|
cell-index = <5>;
|
|
reg = <0x11500 0x100>;
|
|
interrupts = <40 0x8>;
|
|
interrupt-parent = < &ipic >;
|
|
fsl,mode = "ac97-slave";
|
|
rx-fifo-size = <384>;
|
|
tx-fifo-size = <384>;
|
|
};
|
|
|
|
pscfifo@11f00 {
|
|
compatible = "fsl,mpc5121-psc-fifo";
|
|
reg = <0x11f00 0x100>;
|
|
interrupts = <40 0x8>;
|
|
interrupt-parent = < &ipic >;
|
|
};
|
|
|
|
dma@14000 {
|
|
compatible = "fsl,mpc5121-dma2";
|
|
reg = <0x14000 0x1800>;
|
|
interrupts = <65 0x8>;
|
|
interrupt-parent = < &ipic >;
|
|
};
|
|
|
|
};
|
|
|
|
pci: pci@80008500 {
|
|
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
|
interrupt-map = <
|
|
// IDSEL 0x15 - Slot 1 PCI
|
|
0xa800 0x0 0x0 0x1 &cpld_pic 0x0 0x8
|
|
0xa800 0x0 0x0 0x2 &cpld_pic 0x1 0x8
|
|
0xa800 0x0 0x0 0x3 &cpld_pic 0x2 0x8
|
|
0xa800 0x0 0x0 0x4 &cpld_pic 0x3 0x8
|
|
|
|
// IDSEL 0x16 - Slot 2 MiniPCI
|
|
0xb000 0x0 0x0 0x1 &cpld_pic 0x4 0x8
|
|
0xb000 0x0 0x0 0x2 &cpld_pic 0x5 0x8
|
|
|
|
// IDSEL 0x17 - Slot 3 MiniPCI
|
|
0xb800 0x0 0x0 0x1 &cpld_pic 0x6 0x8
|
|
0xb800 0x0 0x0 0x2 &cpld_pic 0x7 0x8
|
|
>;
|
|
interrupt-parent = < &ipic >;
|
|
interrupts = <1 0x8>;
|
|
bus-range = <0 0>;
|
|
ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
|
|
0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
|
|
0x01000000 0x0 0x00000000 0x84000000 0x0 0x01000000>;
|
|
clock-frequency = <0>;
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
reg = <0x80008500 0x100>;
|
|
compatible = "fsl,mpc5121-pci";
|
|
device_type = "pci";
|
|
};
|
|
};
|