76fe1ffce9
This allows other platforms with the same pci block like MPC5121 to use it. Signed-off-by: John Rigby <jrigby@freescale.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
312 lines
10 KiB
C
312 lines
10 KiB
C
/*
|
|
* MPC85xx/86xx PCI/PCIE support routing.
|
|
*
|
|
* Copyright 2007 Freescale Semiconductor, Inc
|
|
*
|
|
* Initial author: Xianghua Xiao <x.xiao@freescale.com>
|
|
* Recode: ZHANG WEI <wei.zhang@freescale.com>
|
|
* Rewrite the routing for Frescale PCI and PCI Express
|
|
* Roy Zang <tie-fei.zang@freescale.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/string.h>
|
|
#include <linux/init.h>
|
|
#include <linux/bootmem.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/machdep.h>
|
|
#include <sysdev/fsl_soc.h>
|
|
#include <sysdev/fsl_pci.h>
|
|
|
|
#if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx)
|
|
/* atmu setup for fsl pci/pcie controller */
|
|
void __init setup_pci_atmu(struct pci_controller *hose, struct resource *rsrc)
|
|
{
|
|
struct ccsr_pci __iomem *pci;
|
|
int i;
|
|
|
|
pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n",
|
|
(u64)rsrc->start, (u64)rsrc->end - (u64)rsrc->start + 1);
|
|
pci = ioremap(rsrc->start, rsrc->end - rsrc->start + 1);
|
|
|
|
/* Disable all windows (except powar0 since its ignored) */
|
|
for(i = 1; i < 5; i++)
|
|
out_be32(&pci->pow[i].powar, 0);
|
|
for(i = 0; i < 3; i++)
|
|
out_be32(&pci->piw[i].piwar, 0);
|
|
|
|
/* Setup outbound MEM window */
|
|
for(i = 0; i < 3; i++)
|
|
if (hose->mem_resources[i].flags & IORESOURCE_MEM){
|
|
resource_size_t pci_addr_start =
|
|
hose->mem_resources[i].start -
|
|
hose->pci_mem_offset;
|
|
pr_debug("PCI MEM resource start 0x%016llx, size 0x%016llx.\n",
|
|
(u64)hose->mem_resources[i].start,
|
|
(u64)hose->mem_resources[i].end
|
|
- (u64)hose->mem_resources[i].start + 1);
|
|
out_be32(&pci->pow[i+1].potar, (pci_addr_start >> 12));
|
|
out_be32(&pci->pow[i+1].potear, 0);
|
|
out_be32(&pci->pow[i+1].powbar,
|
|
(hose->mem_resources[i].start >> 12));
|
|
/* Enable, Mem R/W */
|
|
out_be32(&pci->pow[i+1].powar, 0x80044000
|
|
| (__ilog2(hose->mem_resources[i].end
|
|
- hose->mem_resources[i].start + 1) - 1));
|
|
}
|
|
|
|
/* Setup outbound IO window */
|
|
if (hose->io_resource.flags & IORESOURCE_IO){
|
|
pr_debug("PCI IO resource start 0x%016llx, size 0x%016llx, "
|
|
"phy base 0x%016llx.\n",
|
|
(u64)hose->io_resource.start,
|
|
(u64)hose->io_resource.end - (u64)hose->io_resource.start + 1,
|
|
(u64)hose->io_base_phys);
|
|
out_be32(&pci->pow[i+1].potar, (hose->io_resource.start >> 12));
|
|
out_be32(&pci->pow[i+1].potear, 0);
|
|
out_be32(&pci->pow[i+1].powbar, (hose->io_base_phys >> 12));
|
|
/* Enable, IO R/W */
|
|
out_be32(&pci->pow[i+1].powar, 0x80088000
|
|
| (__ilog2(hose->io_resource.end
|
|
- hose->io_resource.start + 1) - 1));
|
|
}
|
|
|
|
/* Setup 2G inbound Memory Window @ 1 */
|
|
out_be32(&pci->piw[2].pitar, 0x00000000);
|
|
out_be32(&pci->piw[2].piwbar,0x00000000);
|
|
out_be32(&pci->piw[2].piwar, PIWAR_2G);
|
|
}
|
|
|
|
void __init setup_pci_cmd(struct pci_controller *hose)
|
|
{
|
|
u16 cmd;
|
|
int cap_x;
|
|
|
|
early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd);
|
|
cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY
|
|
| PCI_COMMAND_IO;
|
|
early_write_config_word(hose, 0, 0, PCI_COMMAND, cmd);
|
|
|
|
cap_x = early_find_capability(hose, 0, 0, PCI_CAP_ID_PCIX);
|
|
if (cap_x) {
|
|
int pci_x_cmd = cap_x + PCI_X_CMD;
|
|
cmd = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
|
|
| PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
|
|
early_write_config_word(hose, 0, 0, pci_x_cmd, cmd);
|
|
} else {
|
|
early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80);
|
|
}
|
|
}
|
|
|
|
static void __init setup_pci_pcsrbar(struct pci_controller *hose)
|
|
{
|
|
#ifdef CONFIG_PCI_MSI
|
|
phys_addr_t immr_base;
|
|
|
|
immr_base = get_immrbase();
|
|
early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, immr_base);
|
|
#endif
|
|
}
|
|
|
|
static int fsl_pcie_bus_fixup;
|
|
|
|
static void __init quirk_fsl_pcie_header(struct pci_dev *dev)
|
|
{
|
|
/* if we aren't a PCIe don't bother */
|
|
if (!pci_find_capability(dev, PCI_CAP_ID_EXP))
|
|
return ;
|
|
|
|
dev->class = PCI_CLASS_BRIDGE_PCI << 8;
|
|
fsl_pcie_bus_fixup = 1;
|
|
return ;
|
|
}
|
|
|
|
int __init fsl_pcie_check_link(struct pci_controller *hose)
|
|
{
|
|
u32 val;
|
|
early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val);
|
|
if (val < PCIE_LTSSM_L0)
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
void fsl_pcibios_fixup_bus(struct pci_bus *bus)
|
|
{
|
|
struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
|
|
int i;
|
|
|
|
if ((bus->parent == hose->bus) &&
|
|
((fsl_pcie_bus_fixup &&
|
|
early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) ||
|
|
(hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK)))
|
|
{
|
|
for (i = 0; i < 4; ++i) {
|
|
struct resource *res = bus->resource[i];
|
|
struct resource *par = bus->parent->resource[i];
|
|
if (res) {
|
|
res->start = 0;
|
|
res->end = 0;
|
|
res->flags = 0;
|
|
}
|
|
if (res && par) {
|
|
res->start = par->start;
|
|
res->end = par->end;
|
|
res->flags = par->flags;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
int __init fsl_add_bridge(struct device_node *dev, int is_primary)
|
|
{
|
|
int len;
|
|
struct pci_controller *hose;
|
|
struct resource rsrc;
|
|
const int *bus_range;
|
|
|
|
pr_debug("Adding PCI host bridge %s\n", dev->full_name);
|
|
|
|
/* Fetch host bridge registers address */
|
|
if (of_address_to_resource(dev, 0, &rsrc)) {
|
|
printk(KERN_WARNING "Can't get pci register base!");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Get bus range if any */
|
|
bus_range = of_get_property(dev, "bus-range", &len);
|
|
if (bus_range == NULL || len < 2 * sizeof(int))
|
|
printk(KERN_WARNING "Can't get bus-range for %s, assume"
|
|
" bus 0\n", dev->full_name);
|
|
|
|
ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
|
|
hose = pcibios_alloc_controller(dev);
|
|
if (!hose)
|
|
return -ENOMEM;
|
|
|
|
hose->first_busno = bus_range ? bus_range[0] : 0x0;
|
|
hose->last_busno = bus_range ? bus_range[1] : 0xff;
|
|
|
|
setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4,
|
|
PPC_INDIRECT_TYPE_BIG_ENDIAN);
|
|
setup_pci_cmd(hose);
|
|
|
|
/* check PCI express link status */
|
|
if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
|
|
hose->indirect_type |= PPC_INDIRECT_TYPE_EXT_REG |
|
|
PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS;
|
|
if (fsl_pcie_check_link(hose))
|
|
hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK;
|
|
}
|
|
|
|
printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. "
|
|
"Firmware bus number: %d->%d\n",
|
|
(unsigned long long)rsrc.start, hose->first_busno,
|
|
hose->last_busno);
|
|
|
|
pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
|
|
hose, hose->cfg_addr, hose->cfg_data);
|
|
|
|
/* Interpret the "ranges" property */
|
|
/* This also maps the I/O region and sets isa_io/mem_base */
|
|
pci_process_bridge_OF_ranges(hose, dev, is_primary);
|
|
|
|
/* Setup PEX window registers */
|
|
setup_pci_atmu(hose, &rsrc);
|
|
|
|
/* Setup PEXCSRBAR */
|
|
setup_pci_pcsrbar(hose);
|
|
return 0;
|
|
}
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8548E, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8548, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8543E, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8543, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8547E, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8545E, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8545, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8568E, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8568, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8567E, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8567, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8533E, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8533, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8544E, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8544, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8572E, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8572, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8536E, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8536, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header);
|
|
#endif /* CONFIG_PPC_85xx || CONFIG_PPC_86xx */
|
|
|
|
#if defined(CONFIG_PPC_83xx)
|
|
int __init mpc83xx_add_bridge(struct device_node *dev)
|
|
{
|
|
int len;
|
|
struct pci_controller *hose;
|
|
struct resource rsrc;
|
|
const int *bus_range;
|
|
int primary = 1, has_address = 0;
|
|
phys_addr_t immr = get_immrbase();
|
|
|
|
pr_debug("Adding PCI host bridge %s\n", dev->full_name);
|
|
|
|
/* Fetch host bridge registers address */
|
|
has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
|
|
|
|
/* Get bus range if any */
|
|
bus_range = of_get_property(dev, "bus-range", &len);
|
|
if (bus_range == NULL || len < 2 * sizeof(int)) {
|
|
printk(KERN_WARNING "Can't get bus-range for %s, assume"
|
|
" bus 0\n", dev->full_name);
|
|
}
|
|
|
|
ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
|
|
hose = pcibios_alloc_controller(dev);
|
|
if (!hose)
|
|
return -ENOMEM;
|
|
|
|
hose->first_busno = bus_range ? bus_range[0] : 0;
|
|
hose->last_busno = bus_range ? bus_range[1] : 0xff;
|
|
|
|
/* MPC83xx supports up to two host controllers one at 0x8500 from immrbar
|
|
* the other at 0x8600, we consider the 0x8500 the primary controller
|
|
*/
|
|
/* PCI 1 */
|
|
if ((rsrc.start & 0xfffff) == 0x8500) {
|
|
setup_indirect_pci(hose, immr + 0x8300, immr + 0x8304, 0);
|
|
}
|
|
/* PCI 2 */
|
|
if ((rsrc.start & 0xfffff) == 0x8600) {
|
|
setup_indirect_pci(hose, immr + 0x8380, immr + 0x8384, 0);
|
|
primary = 0;
|
|
}
|
|
|
|
printk(KERN_INFO "Found MPC83xx PCI host bridge at 0x%016llx. "
|
|
"Firmware bus number: %d->%d\n",
|
|
(unsigned long long)rsrc.start, hose->first_busno,
|
|
hose->last_busno);
|
|
|
|
pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
|
|
hose, hose->cfg_addr, hose->cfg_data);
|
|
|
|
/* Interpret the "ranges" property */
|
|
/* This also maps the I/O region and sets isa_io/mem_base */
|
|
pci_process_bridge_OF_ranges(hose, dev, primary);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PPC_83xx */
|