ada54f35b2
Add calls to arch_set_freq_scale() in qcom-cpufreq-hw driver to enable frequency invariance. Signed-off-by: Douglas RAILLARD <douglas.raillard@arm.com> Reviewed-by: Quentin Perret <quentin.perret@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
347 lines
8.2 KiB
C
347 lines
8.2 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2018, The Linux Foundation. All rights reserved.
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/cpufreq.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/pm_opp.h>
|
|
#include <linux/slab.h>
|
|
|
|
#define LUT_MAX_ENTRIES 40U
|
|
#define LUT_SRC GENMASK(31, 30)
|
|
#define LUT_L_VAL GENMASK(7, 0)
|
|
#define LUT_CORE_COUNT GENMASK(18, 16)
|
|
#define LUT_VOLT GENMASK(11, 0)
|
|
#define LUT_ROW_SIZE 32
|
|
#define CLK_HW_DIV 2
|
|
#define LUT_TURBO_IND 1
|
|
|
|
/* Register offsets */
|
|
#define REG_ENABLE 0x0
|
|
#define REG_FREQ_LUT 0x110
|
|
#define REG_VOLT_LUT 0x114
|
|
#define REG_PERF_STATE 0x920
|
|
|
|
static unsigned long cpu_hw_rate, xo_rate;
|
|
static struct platform_device *global_pdev;
|
|
|
|
static int qcom_cpufreq_hw_target_index(struct cpufreq_policy *policy,
|
|
unsigned int index)
|
|
{
|
|
void __iomem *perf_state_reg = policy->driver_data;
|
|
unsigned long freq = policy->freq_table[index].frequency;
|
|
|
|
writel_relaxed(index, perf_state_reg);
|
|
|
|
arch_set_freq_scale(policy->related_cpus, freq,
|
|
policy->cpuinfo.max_freq);
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int qcom_cpufreq_hw_get(unsigned int cpu)
|
|
{
|
|
void __iomem *perf_state_reg;
|
|
struct cpufreq_policy *policy;
|
|
unsigned int index;
|
|
|
|
policy = cpufreq_cpu_get_raw(cpu);
|
|
if (!policy)
|
|
return 0;
|
|
|
|
perf_state_reg = policy->driver_data;
|
|
|
|
index = readl_relaxed(perf_state_reg);
|
|
index = min(index, LUT_MAX_ENTRIES - 1);
|
|
|
|
return policy->freq_table[index].frequency;
|
|
}
|
|
|
|
static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy,
|
|
unsigned int target_freq)
|
|
{
|
|
void __iomem *perf_state_reg = policy->driver_data;
|
|
int index;
|
|
unsigned long freq;
|
|
|
|
index = policy->cached_resolved_idx;
|
|
if (index < 0)
|
|
return 0;
|
|
|
|
writel_relaxed(index, perf_state_reg);
|
|
|
|
freq = policy->freq_table[index].frequency;
|
|
arch_set_freq_scale(policy->related_cpus, freq,
|
|
policy->cpuinfo.max_freq);
|
|
|
|
return freq;
|
|
}
|
|
|
|
static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
|
|
struct cpufreq_policy *policy,
|
|
void __iomem *base)
|
|
{
|
|
u32 data, src, lval, i, core_count, prev_freq = 0, freq;
|
|
u32 volt;
|
|
struct cpufreq_frequency_table *table;
|
|
|
|
table = kcalloc(LUT_MAX_ENTRIES + 1, sizeof(*table), GFP_KERNEL);
|
|
if (!table)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < LUT_MAX_ENTRIES; i++) {
|
|
data = readl_relaxed(base + REG_FREQ_LUT +
|
|
i * LUT_ROW_SIZE);
|
|
src = FIELD_GET(LUT_SRC, data);
|
|
lval = FIELD_GET(LUT_L_VAL, data);
|
|
core_count = FIELD_GET(LUT_CORE_COUNT, data);
|
|
|
|
data = readl_relaxed(base + REG_VOLT_LUT +
|
|
i * LUT_ROW_SIZE);
|
|
volt = FIELD_GET(LUT_VOLT, data) * 1000;
|
|
|
|
if (src)
|
|
freq = xo_rate * lval / 1000;
|
|
else
|
|
freq = cpu_hw_rate / 1000;
|
|
|
|
if (freq != prev_freq && core_count != LUT_TURBO_IND) {
|
|
table[i].frequency = freq;
|
|
dev_pm_opp_add(cpu_dev, freq * 1000, volt);
|
|
dev_dbg(cpu_dev, "index=%d freq=%d, core_count %d\n", i,
|
|
freq, core_count);
|
|
} else if (core_count == LUT_TURBO_IND) {
|
|
table[i].frequency = CPUFREQ_ENTRY_INVALID;
|
|
}
|
|
|
|
/*
|
|
* Two of the same frequencies with the same core counts means
|
|
* end of table
|
|
*/
|
|
if (i > 0 && prev_freq == freq) {
|
|
struct cpufreq_frequency_table *prev = &table[i - 1];
|
|
|
|
/*
|
|
* Only treat the last frequency that might be a boost
|
|
* as the boost frequency
|
|
*/
|
|
if (prev->frequency == CPUFREQ_ENTRY_INVALID) {
|
|
prev->frequency = prev_freq;
|
|
prev->flags = CPUFREQ_BOOST_FREQ;
|
|
dev_pm_opp_add(cpu_dev, prev_freq * 1000, volt);
|
|
}
|
|
|
|
break;
|
|
}
|
|
|
|
prev_freq = freq;
|
|
}
|
|
|
|
table[i].frequency = CPUFREQ_TABLE_END;
|
|
policy->freq_table = table;
|
|
dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void qcom_get_related_cpus(int index, struct cpumask *m)
|
|
{
|
|
struct device_node *cpu_np;
|
|
struct of_phandle_args args;
|
|
int cpu, ret;
|
|
|
|
for_each_possible_cpu(cpu) {
|
|
cpu_np = of_cpu_device_node_get(cpu);
|
|
if (!cpu_np)
|
|
continue;
|
|
|
|
ret = of_parse_phandle_with_args(cpu_np, "qcom,freq-domain",
|
|
"#freq-domain-cells", 0,
|
|
&args);
|
|
of_node_put(cpu_np);
|
|
if (ret < 0)
|
|
continue;
|
|
|
|
if (index == args.args[0])
|
|
cpumask_set_cpu(cpu, m);
|
|
}
|
|
}
|
|
|
|
static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
|
|
{
|
|
struct device *dev = &global_pdev->dev;
|
|
struct of_phandle_args args;
|
|
struct device_node *cpu_np;
|
|
struct device *cpu_dev;
|
|
struct resource *res;
|
|
void __iomem *base;
|
|
int ret, index;
|
|
|
|
cpu_dev = get_cpu_device(policy->cpu);
|
|
if (!cpu_dev) {
|
|
pr_err("%s: failed to get cpu%d device\n", __func__,
|
|
policy->cpu);
|
|
return -ENODEV;
|
|
}
|
|
|
|
cpu_np = of_cpu_device_node_get(policy->cpu);
|
|
if (!cpu_np)
|
|
return -EINVAL;
|
|
|
|
ret = of_parse_phandle_with_args(cpu_np, "qcom,freq-domain",
|
|
"#freq-domain-cells", 0, &args);
|
|
of_node_put(cpu_np);
|
|
if (ret)
|
|
return ret;
|
|
|
|
index = args.args[0];
|
|
|
|
res = platform_get_resource(global_pdev, IORESOURCE_MEM, index);
|
|
if (!res)
|
|
return -ENODEV;
|
|
|
|
base = devm_ioremap(dev, res->start, resource_size(res));
|
|
if (!base)
|
|
return -ENOMEM;
|
|
|
|
/* HW should be in enabled state to proceed */
|
|
if (!(readl_relaxed(base + REG_ENABLE) & 0x1)) {
|
|
dev_err(dev, "Domain-%d cpufreq hardware not enabled\n", index);
|
|
ret = -ENODEV;
|
|
goto error;
|
|
}
|
|
|
|
qcom_get_related_cpus(index, policy->cpus);
|
|
if (!cpumask_weight(policy->cpus)) {
|
|
dev_err(dev, "Domain-%d failed to get related CPUs\n", index);
|
|
ret = -ENOENT;
|
|
goto error;
|
|
}
|
|
|
|
policy->driver_data = base + REG_PERF_STATE;
|
|
|
|
ret = qcom_cpufreq_hw_read_lut(cpu_dev, policy, base);
|
|
if (ret) {
|
|
dev_err(dev, "Domain-%d failed to read LUT\n", index);
|
|
goto error;
|
|
}
|
|
|
|
ret = dev_pm_opp_get_opp_count(cpu_dev);
|
|
if (ret <= 0) {
|
|
dev_err(cpu_dev, "Failed to add OPPs\n");
|
|
ret = -ENODEV;
|
|
goto error;
|
|
}
|
|
|
|
dev_pm_opp_of_register_em(policy->cpus);
|
|
|
|
policy->fast_switch_possible = true;
|
|
|
|
return 0;
|
|
error:
|
|
devm_iounmap(dev, base);
|
|
return ret;
|
|
}
|
|
|
|
static int qcom_cpufreq_hw_cpu_exit(struct cpufreq_policy *policy)
|
|
{
|
|
struct device *cpu_dev = get_cpu_device(policy->cpu);
|
|
void __iomem *base = policy->driver_data - REG_PERF_STATE;
|
|
|
|
dev_pm_opp_remove_all_dynamic(cpu_dev);
|
|
kfree(policy->freq_table);
|
|
devm_iounmap(&global_pdev->dev, base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct freq_attr *qcom_cpufreq_hw_attr[] = {
|
|
&cpufreq_freq_attr_scaling_available_freqs,
|
|
&cpufreq_freq_attr_scaling_boost_freqs,
|
|
NULL
|
|
};
|
|
|
|
static struct cpufreq_driver cpufreq_qcom_hw_driver = {
|
|
.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK |
|
|
CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
|
|
CPUFREQ_IS_COOLING_DEV,
|
|
.verify = cpufreq_generic_frequency_table_verify,
|
|
.target_index = qcom_cpufreq_hw_target_index,
|
|
.get = qcom_cpufreq_hw_get,
|
|
.init = qcom_cpufreq_hw_cpu_init,
|
|
.exit = qcom_cpufreq_hw_cpu_exit,
|
|
.fast_switch = qcom_cpufreq_hw_fast_switch,
|
|
.name = "qcom-cpufreq-hw",
|
|
.attr = qcom_cpufreq_hw_attr,
|
|
};
|
|
|
|
static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev)
|
|
{
|
|
struct clk *clk;
|
|
int ret;
|
|
|
|
clk = clk_get(&pdev->dev, "xo");
|
|
if (IS_ERR(clk))
|
|
return PTR_ERR(clk);
|
|
|
|
xo_rate = clk_get_rate(clk);
|
|
clk_put(clk);
|
|
|
|
clk = clk_get(&pdev->dev, "alternate");
|
|
if (IS_ERR(clk))
|
|
return PTR_ERR(clk);
|
|
|
|
cpu_hw_rate = clk_get_rate(clk) / CLK_HW_DIV;
|
|
clk_put(clk);
|
|
|
|
global_pdev = pdev;
|
|
|
|
ret = cpufreq_register_driver(&cpufreq_qcom_hw_driver);
|
|
if (ret)
|
|
dev_err(&pdev->dev, "CPUFreq HW driver failed to register\n");
|
|
else
|
|
dev_dbg(&pdev->dev, "QCOM CPUFreq HW driver initialized\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int qcom_cpufreq_hw_driver_remove(struct platform_device *pdev)
|
|
{
|
|
return cpufreq_unregister_driver(&cpufreq_qcom_hw_driver);
|
|
}
|
|
|
|
static const struct of_device_id qcom_cpufreq_hw_match[] = {
|
|
{ .compatible = "qcom,cpufreq-hw" },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, qcom_cpufreq_hw_match);
|
|
|
|
static struct platform_driver qcom_cpufreq_hw_driver = {
|
|
.probe = qcom_cpufreq_hw_driver_probe,
|
|
.remove = qcom_cpufreq_hw_driver_remove,
|
|
.driver = {
|
|
.name = "qcom-cpufreq-hw",
|
|
.of_match_table = qcom_cpufreq_hw_match,
|
|
},
|
|
};
|
|
|
|
static int __init qcom_cpufreq_hw_init(void)
|
|
{
|
|
return platform_driver_register(&qcom_cpufreq_hw_driver);
|
|
}
|
|
device_initcall(qcom_cpufreq_hw_init);
|
|
|
|
static void __exit qcom_cpufreq_hw_exit(void)
|
|
{
|
|
platform_driver_unregister(&qcom_cpufreq_hw_driver);
|
|
}
|
|
module_exit(qcom_cpufreq_hw_exit);
|
|
|
|
MODULE_DESCRIPTION("QCOM CPUFREQ HW Driver");
|
|
MODULE_LICENSE("GPL v2");
|