David Woodhouse b5b82df6f4 NS16550A: Restore HS settings in EXCR2 on resume ... After a suspend/resume cycle, the UART may have been reset into low-speed mode -- either because it's actually been reset, or because the firmware pokes at the old-style divisor registers. If we detected it as a NS16550A SuperIO chip in the first place and set baud_base to 921600, then we should do so again in the resume path. This patch adds that code to serial8250_resume_port(), and also makes serial8250_resume() actually call serial8250_resume_port() for each port instead of just calling uart_resume_port() directly. And thus fixes serial port operation after suspend/resume. It also fixes a bogus comment where we write the EXCR2 register with a comment saying /* EXCR1 */ Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>		2007-05-17 05:25:49 -07:00
..
cpm_uart	[POWERPC] CPM_UART: Removed __init from cpm_uart_init_portdesc to fix warning	2007-05-09 23:44:58 -05:00
jsm	Subject: jsm driver fix for linuxpps support	2007-05-08 11:15:03 -07:00
8250_accent.c
8250_acorn.c	[ARM] ecard: add ecardm_iomap() / ecardm_iounmap()	2007-05-11 17:19:02 +01:00
8250_au1x00.c
8250_boca.c
8250_early.c
8250_exar_st16c554.c
8250_fourport.c
8250_gsc.c
8250_hp300.c
8250_hub6.c
8250_mca.c
8250_pci.c	[PATCH] remove many unneeded #includes of sched.h	2007-02-14 08:09:54 -08:00
8250_pnp.c	[PATCH] add Fujitsu Siemens Tablet PC devices to 8250_pnp.c	2007-03-23 11:01:22 -07:00
8250.c	NS16550A: Restore HS settings in EXCR2 on resume	2007-05-17 05:25:49 -07:00
8250.h
21285.c
68328serial.c
68328serial.h
68360serial.c
amba-pl010.c	[ARM] Convert AMBA PL010 driver to use the clk infrastructure	2007-04-22 12:30:41 +01:00
amba-pl011.c
atmel_serial.c	[ARM] 4357/1: AT91: Support slower serial baud-rates	2007-05-03 14:12:45 +01:00
atmel_serial.h	[ARM] 4357/1: AT91: Support slower serial baud-rates	2007-05-03 14:12:45 +01:00
bfin_5xx.c	blackfin: serial driver	2007-05-07 12:12:58 -07:00
clps711x.c
crisv10.c	[PATCH] Char: tty_wakeup cleanup	2007-02-11 10:51:26 -08:00
dz.c	[PATCH] dz: remove struct pt_regs references	2007-03-05 07:57:51 -08:00
dz.h
icom.c	icom: add new sub-device-id to support new adapter	2007-05-17 05:23:05 -07:00
icom.h	do not truncate irq number for icom adapter	2007-04-24 08:23:08 -07:00
imx.c	[ARM] 4328/1: Move i.MX UART regs to driver	2007-05-03 20:24:21 +01:00
ioc3_serial.c	[PATCH] serial: replace kmalloc+memset with kzalloc	2007-02-14 08:09:52 -08:00
ioc4_serial.c	[PATCH] serial: replace kmalloc+memset with kzalloc	2007-02-14 08:09:52 -08:00
ip22zilog.c	[PATCH] remove many unneeded #includes of sched.h	2007-02-14 08:09:54 -08:00
ip22zilog.h
Kconfig	[ARM] 4332/2: KS8695: Serial driver	2007-05-11 22:02:52 +01:00
m32r_sio_reg.h
m32r_sio.c
m32r_sio.h
Makefile	[ARM] 4332/2: KS8695: Serial driver	2007-05-11 22:02:52 +01:00
mcfserial.c	[PATCH] m68knommu: fix work queues in mcfserial.c driver	2007-03-06 18:08:38 -08:00
mcfserial.h
mpc52xx_uart.c	[POWERPC] Don't shutdown TX on mpc5200 serial port if it is a console	2007-05-07 20:31:15 +10:00
mpsc.c	MPSC serial driver tx locking	2007-05-07 12:12:50 -07:00
mux.c	Merge branch 'parisc' from /home/kyle/repos/parisc-2.6.git	2007-02-17 00:18:23 -05:00
netx-serial.c
of_serial.c	Merge branch 'linux-2.6'	2007-05-08 13:37:51 +10:00
pmac_zilog.c	[POWERPC] Rename device_is_compatible to of_device_is_compatible	2007-05-07 20:31:14 +10:00
pmac_zilog.h
pnx8xxx_uart.c	[PATCH] PNX8550 UART driver	2007-02-14 08:09:52 -08:00
pxa.c	[ARM] 4304/1: removes the unnecessary bit number from CKENnn_XXXX	2007-04-21 23:14:01 +01:00
s3c2410.c	SPIN_LOCK_UNLOCKED cleanup in drivers/serial	2007-05-08 11:15:11 -07:00
sa1100.c
serial_core.c	Serial: serial_core, use pr_debug	2007-05-07 12:12:51 -07:00
serial_cs.c	serial: Add PCMCIA IDs for Quatech DSP-100 dual RS232 adapter.	2007-02-16 15:19:16 -08:00
serial_ks8695.c	[ARM] 4332/2: KS8695: Serial driver	2007-05-11 22:02:52 +01:00
serial_lh7a40x.c
serial_txx9.c	serial_txx9: zap changelog from source code	2007-05-08 11:15:12 -07:00
sh-sci.c	serial: sh-sci: Fix module clock refcount for serial console.	2007-05-07 02:11:56 +00:00
sh-sci.h	sh: MS7712SE01 board support.	2007-05-07 02:10:54 +00:00
sn_console.c	[PATCH] 2.6 Altix: console fix for CONFIG_DEBUG_SHIRQ usage	2007-03-08 07:39:15 -08:00
suncore.c
suncore.h
sunhv.c	[SPARC64]: Add hypervisor API negotiation and fix console bugs.	2007-05-15 20:23:02 -07:00
sunsab.c	[PATCH] remove many unneeded #includes of sched.h	2007-02-14 08:09:54 -08:00
sunsab.h
sunsu.c	[SERIAL] sunsu: Fix section mismatch warnings.	2007-05-07 00:14:13 -07:00
sunzilog.c	[SERIAL] sunzilog: Interrupt enable before ISR handler installed	2007-05-09 13:49:04 -07:00
sunzilog.h	[SERIAL] sunzilog: Interrupt enable before ISR handler installed	2007-05-09 13:49:04 -07:00
uartlite.c
v850e_uart.c
vr41xx_siu.c