android_kernel_xiaomi_sm8350/drivers/scsi/pcmcia/aha152x_stub.c
Jürgen E. Fischer e2482fa16e [SCSI] aha152x: fix variable use before initialisation and other bugs
- change interface of the reset functions from Scsi_Cmnd to Scsi_Host.
- add functions with the original interface and rename the new
  functions to reflect the new interface.
- call these from the pcmcia driver, thereby avoiding the need to
  construct a (broken) Scsi_Cmnd from a Scsi_Host.
- just run the bh if the interrupt is from the controller and if so
  ensure that it's only called once per interrupt.

Signed-off-by: Juergen E. Fischer <fischer@linux-buechse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28 11:20:45 -06:00

321 lines
9.4 KiB
C

/*======================================================================
A driver for Adaptec AHA152X-compatible PCMCIA SCSI cards.
This driver supports the Adaptec AHA-1460, the New Media Bus
Toaster, and the New Media Toast & Jam.
aha152x_cs.c 1.54 2000/06/12 21:27:25
The contents of this file are subject to the Mozilla Public
License Version 1.1 (the "License"); you may not use this file
except in compliance with the License. You may obtain a copy of
the License at http://www.mozilla.org/MPL/
Software distributed under the License is distributed on an "AS
IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
implied. See the License for the specific language governing
rights and limitations under the License.
The initial developer of the original code is David A. Hinds
<dahinds@users.sourceforge.net>. Portions created by David A. Hinds
are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
Alternatively, the contents of this file may be used under the
terms of the GNU General Public License version 2 (the "GPL"), in which
case the provisions of the GPL are applicable instead of the
above. If you wish to allow the use of your version of this file
only under the terms of the GPL and not to allow others to use
your version of this file under the MPL, indicate your decision
by deleting the provisions above and replace them with the notice
and other provisions required by the GPL. If you do not delete
the provisions above, a recipient may use your version of this
file under either the MPL or the GPL.
======================================================================*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/ioport.h>
#include <scsi/scsi.h>
#include <linux/major.h>
#include <linux/blkdev.h>
#include <scsi/scsi_ioctl.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include "aha152x.h"
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
#ifdef PCMCIA_DEBUG
static int pc_debug = PCMCIA_DEBUG;
module_param(pc_debug, int, 0644);
#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
static char *version =
"aha152x_cs.c 1.54 2000/06/12 21:27:25 (David Hinds)";
#else
#define DEBUG(n, args...)
#endif
/*====================================================================*/
/* Parameters that can be set with 'insmod' */
/* SCSI bus setup options */
static int host_id = 7;
static int reconnect = 1;
static int parity = 1;
static int synchronous = 1;
static int reset_delay = 100;
static int ext_trans = 0;
module_param(host_id, int, 0);
module_param(reconnect, int, 0);
module_param(parity, int, 0);
module_param(synchronous, int, 0);
module_param(reset_delay, int, 0);
module_param(ext_trans, int, 0);
MODULE_LICENSE("Dual MPL/GPL");
/*====================================================================*/
typedef struct scsi_info_t {
dev_link_t link;
dev_node_t node;
struct Scsi_Host *host;
} scsi_info_t;
static void aha152x_release_cs(dev_link_t *link);
static void aha152x_detach(struct pcmcia_device *p_dev);
static void aha152x_config_cs(dev_link_t *link);
static dev_link_t *dev_list;
static int aha152x_attach(struct pcmcia_device *p_dev)
{
scsi_info_t *info;
dev_link_t *link;
DEBUG(0, "aha152x_attach()\n");
/* Create new SCSI device */
info = kmalloc(sizeof(*info), GFP_KERNEL);
if (!info) return -ENOMEM;
memset(info, 0, sizeof(*info));
link = &info->link; link->priv = info;
link->io.NumPorts1 = 0x20;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
link->io.IOAddrLines = 10;
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
link->handle = p_dev;
p_dev->instance = link;
link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
aha152x_config_cs(link);
return 0;
} /* aha152x_attach */
/*====================================================================*/
static void aha152x_detach(struct pcmcia_device *p_dev)
{
dev_link_t *link = dev_to_instance(p_dev);
dev_link_t **linkp;
DEBUG(0, "aha152x_detach(0x%p)\n", link);
/* Locate device structure */
for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
if (*linkp == link) break;
if (*linkp == NULL)
return;
if (link->state & DEV_CONFIG)
aha152x_release_cs(link);
/* Unlink device structure, free bits */
*linkp = link->next;
kfree(link->priv);
} /* aha152x_detach */
/*====================================================================*/
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
static void aha152x_config_cs(dev_link_t *link)
{
client_handle_t handle = link->handle;
scsi_info_t *info = link->priv;
struct aha152x_setup s;
tuple_t tuple;
cisparse_t parse;
int i, last_ret, last_fn;
u_char tuple_data[64];
struct Scsi_Host *host;
DEBUG(0, "aha152x_config(0x%p)\n", link);
tuple.DesiredTuple = CISTPL_CONFIG;
tuple.TupleData = tuple_data;
tuple.TupleDataMax = 64;
tuple.TupleOffset = 0;
CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
link->conf.ConfigBase = parse.config.base;
/* Configure card */
link->state |= DEV_CONFIG;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
while (1) {
if (pcmcia_get_tuple_data(handle, &tuple) != 0 ||
pcmcia_parse_tuple(handle, &tuple, &parse) != 0)
goto next_entry;
/* For New Media T&J, look for a SCSI window */
if (parse.cftable_entry.io.win[0].len >= 0x20)
link->io.BasePort1 = parse.cftable_entry.io.win[0].base;
else if ((parse.cftable_entry.io.nwin > 1) &&
(parse.cftable_entry.io.win[1].len >= 0x20))
link->io.BasePort1 = parse.cftable_entry.io.win[1].base;
if ((parse.cftable_entry.io.nwin > 0) &&
(link->io.BasePort1 < 0xffff)) {
link->conf.ConfigIndex = parse.cftable_entry.index;
i = pcmcia_request_io(handle, &link->io);
if (i == CS_SUCCESS) break;
}
next_entry:
CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(handle, &tuple));
}
CS_CHECK(RequestIRQ, pcmcia_request_irq(handle, &link->irq));
CS_CHECK(RequestConfiguration, pcmcia_request_configuration(handle, &link->conf));
/* Set configuration options for the aha152x driver */
memset(&s, 0, sizeof(s));
s.conf = "PCMCIA setup";
s.io_port = link->io.BasePort1;
s.irq = link->irq.AssignedIRQ;
s.scsiid = host_id;
s.reconnect = reconnect;
s.parity = parity;
s.synchronous = synchronous;
s.delay = reset_delay;
if (ext_trans)
s.ext_trans = ext_trans;
host = aha152x_probe_one(&s);
if (host == NULL) {
printk(KERN_INFO "aha152x_cs: no SCSI devices found\n");
goto cs_failed;
}
sprintf(info->node.dev_name, "scsi%d", host->host_no);
link->dev = &info->node;
info->host = host;
link->state &= ~DEV_CONFIG_PENDING;
return;
cs_failed:
cs_error(link->handle, last_fn, last_ret);
aha152x_release_cs(link);
return;
}
static void aha152x_release_cs(dev_link_t *link)
{
scsi_info_t *info = link->priv;
aha152x_release(info->host);
link->dev = NULL;
pcmcia_release_configuration(link->handle);
pcmcia_release_io(link->handle, &link->io);
pcmcia_release_irq(link->handle, &link->irq);
link->state &= ~DEV_CONFIG;
}
static int aha152x_suspend(struct pcmcia_device *dev)
{
dev_link_t *link = dev_to_instance(dev);
link->state |= DEV_SUSPEND;
if (link->state & DEV_CONFIG)
pcmcia_release_configuration(link->handle);
return 0;
}
static int aha152x_resume(struct pcmcia_device *dev)
{
dev_link_t *link = dev_to_instance(dev);
scsi_info_t *info = link->priv;
link->state &= ~DEV_SUSPEND;
if (link->state & DEV_CONFIG) {
pcmcia_request_configuration(link->handle, &link->conf);
aha152x_host_reset_host(info->host);
}
return 0;
}
static struct pcmcia_device_id aha152x_ids[] = {
PCMCIA_DEVICE_PROD_ID123("New Media", "SCSI", "Bus Toaster", 0xcdf7e4cc, 0x35f26476, 0xa8851d6e),
PCMCIA_DEVICE_PROD_ID123("NOTEWORTHY", "SCSI", "Bus Toaster", 0xad89c6e8, 0x35f26476, 0xa8851d6e),
PCMCIA_DEVICE_PROD_ID12("Adaptec, Inc.", "APA-1460 SCSI Host Adapter", 0x24ba9738, 0x3a3c3d20),
PCMCIA_DEVICE_PROD_ID12("New Media Corporation", "Multimedia Sound/SCSI", 0x085a850b, 0x80a6535c),
PCMCIA_DEVICE_PROD_ID12("NOTEWORTHY", "NWCOMB02 SCSI/AUDIO COMBO CARD", 0xad89c6e8, 0x5f9a615b),
PCMCIA_DEVICE_NULL,
};
MODULE_DEVICE_TABLE(pcmcia, aha152x_ids);
static struct pcmcia_driver aha152x_cs_driver = {
.owner = THIS_MODULE,
.drv = {
.name = "aha152x_cs",
},
.probe = aha152x_attach,
.remove = aha152x_detach,
.id_table = aha152x_ids,
.suspend = aha152x_suspend,
.resume = aha152x_resume,
};
static int __init init_aha152x_cs(void)
{
return pcmcia_register_driver(&aha152x_cs_driver);
}
static void __exit exit_aha152x_cs(void)
{
pcmcia_unregister_driver(&aha152x_cs_driver);
BUG_ON(dev_list != NULL);
}
module_init(init_aha152x_cs);
module_exit(exit_aha152x_cs);