android_kernel_xiaomi_sm8350/drivers/block/paride/paride.h
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

171 lines
4.9 KiB
C

#ifndef __DRIVERS_PARIDE_H__
#define __DRIVERS_PARIDE_H__
/*
paride.h (c) 1997-8 Grant R. Guenther <grant@torque.net>
Under the terms of the GPL.
This file defines the interface between the high-level parallel
IDE device drivers (pd, pf, pcd, pt) and the adapter chips.
*/
/* Changes:
1.01 GRG 1998.05.05 init_proto, release_proto
*/
#define PARIDE_H_VERSION "1.01"
/* Some adapters need to know what kind of device they are in
Values for devtype:
*/
#define PI_PD 0 /* IDE disk */
#define PI_PCD 1 /* ATAPI CDrom */
#define PI_PF 2 /* ATAPI disk */
#define PI_PT 3 /* ATAPI tape */
#define PI_PG 4 /* ATAPI generic */
/* The paride module contains no state, instead the drivers allocate
a pi_adapter data structure and pass it to paride in every operation.
*/
struct pi_adapter {
struct pi_protocol *proto; /* adapter protocol */
int port; /* base address of parallel port */
int mode; /* transfer mode in use */
int delay; /* adapter delay setting */
int devtype; /* device type: PI_PD etc. */
char *device; /* name of driver */
int unit; /* unit number for chained adapters */
int saved_r0; /* saved port state */
int saved_r2; /* saved port state */
int reserved; /* number of ports reserved */
unsigned long private; /* for protocol module */
wait_queue_head_t parq; /* semaphore for parport sharing */
void *pardev; /* pointer to pardevice */
char *parname; /* parport name */
int claimed; /* parport has already been claimed */
void (*claim_cont)(void); /* continuation for parport wait */
};
typedef struct pi_adapter PIA;
/* functions exported by paride to the high level drivers */
extern int pi_init(PIA *pi,
int autoprobe, /* 1 to autoprobe */
int port, /* base port address */
int mode, /* -1 for autoprobe */
int unit, /* unit number, if supported */
int protocol, /* protocol to use */
int delay, /* -1 to use adapter specific default */
char * scratch, /* address of 512 byte buffer */
int devtype, /* device type: PI_PD, PI_PCD, etc ... */
int verbose, /* log verbose data while probing */
char *device /* name of the driver */
); /* returns 0 on failure, 1 on success */
extern void pi_release(PIA *pi);
/* registers are addressed as (cont,regr)
cont: 0 for command register file, 1 for control register(s)
regr: 0-7 for register number.
*/
extern void pi_write_regr(PIA *pi, int cont, int regr, int val);
extern int pi_read_regr(PIA *pi, int cont, int regr);
extern void pi_write_block(PIA *pi, char * buf, int count);
extern void pi_read_block(PIA *pi, char * buf, int count);
extern void pi_connect(PIA *pi);
extern void pi_disconnect(PIA *pi);
extern void pi_do_claimed(PIA *pi, void (*cont)(void));
extern int pi_schedule_claimed(PIA *pi, void (*cont)(void));
/* macros and functions exported to the protocol modules */
#define delay_p (pi->delay?udelay(pi->delay):(void)0)
#define out_p(offs,byte) outb(byte,pi->port+offs); delay_p;
#define in_p(offs) (delay_p,inb(pi->port+offs))
#define w0(byte) {out_p(0,byte);}
#define r0() (in_p(0) & 0xff)
#define w1(byte) {out_p(1,byte);}
#define r1() (in_p(1) & 0xff)
#define w2(byte) {out_p(2,byte);}
#define r2() (in_p(2) & 0xff)
#define w3(byte) {out_p(3,byte);}
#define w4(byte) {out_p(4,byte);}
#define r4() (in_p(4) & 0xff)
#define w4w(data) {outw(data,pi->port+4); delay_p;}
#define w4l(data) {outl(data,pi->port+4); delay_p;}
#define r4w() (delay_p,inw(pi->port+4)&0xffff)
#define r4l() (delay_p,inl(pi->port+4)&0xffffffff)
static inline u16 pi_swab16( char *b, int k)
{ union { u16 u; char t[2]; } r;
r.t[0]=b[2*k+1]; r.t[1]=b[2*k];
return r.u;
}
static inline u32 pi_swab32( char *b, int k)
{ union { u32 u; char f[4]; } r;
r.f[0]=b[4*k+1]; r.f[1]=b[4*k];
r.f[2]=b[4*k+3]; r.f[3]=b[4*k+2];
return r.u;
}
struct pi_protocol {
char name[8]; /* name for this protocol */
int index; /* index into protocol table */
int max_mode; /* max mode number */
int epp_first; /* modes >= this use 8 ports */
int default_delay; /* delay parameter if not specified */
int max_units; /* max chained units probed for */
void (*write_regr)(PIA *,int,int,int);
int (*read_regr)(PIA *,int,int);
void (*write_block)(PIA *,char *,int);
void (*read_block)(PIA *,char *,int);
void (*connect)(PIA *);
void (*disconnect)(PIA *);
int (*test_port)(PIA *);
int (*probe_unit)(PIA *);
int (*test_proto)(PIA *,char *,int);
void (*log_adapter)(PIA *,char *,int);
int (*init_proto)(PIA *);
void (*release_proto)(PIA *);
struct module *owner;
};
typedef struct pi_protocol PIP;
extern int pi_register( PIP * );
extern void pi_unregister ( PIP * );
#endif /* __DRIVERS_PARIDE_H__ */
/* end of paride.h */