3c726f8dee
Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel base page size to 64K. The resulting kernel still boots on any hardware. On current machines with 4K pages support only, the kernel will maintain 16 "subpages" for each 64K page transparently. Note that while real 64K capable HW has been tested, the current patch will not enable it yet as such hardware is not released yet, and I'm still verifying with the firmware architects the proper to get the information from the newer hypervisors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
848 lines
22 KiB
ArmAsm
848 lines
22 KiB
ArmAsm
/*
|
|
* ppc64 MMU hashtable management routines
|
|
*
|
|
* (c) Copyright IBM Corp. 2003, 2005
|
|
*
|
|
* Maintained by: Benjamin Herrenschmidt
|
|
* <benh@kernel.crashing.org>
|
|
*
|
|
* This file is covered by the GNU Public Licence v2 as
|
|
* described in the kernel's COPYING file.
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
#include <asm/reg.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/page.h>
|
|
#include <asm/types.h>
|
|
#include <asm/ppc_asm.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/cputable.h>
|
|
|
|
.text
|
|
|
|
/*
|
|
* Stackframe:
|
|
*
|
|
* +-> Back chain (SP + 256)
|
|
* | General register save area (SP + 112)
|
|
* | Parameter save area (SP + 48)
|
|
* | TOC save area (SP + 40)
|
|
* | link editor doubleword (SP + 32)
|
|
* | compiler doubleword (SP + 24)
|
|
* | LR save area (SP + 16)
|
|
* | CR save area (SP + 8)
|
|
* SP ---> +-- Back chain (SP + 0)
|
|
*/
|
|
#define STACKFRAMESIZE 256
|
|
|
|
/* Save parameters offsets */
|
|
#define STK_PARM(i) (STACKFRAMESIZE + 48 + ((i)-3)*8)
|
|
|
|
/* Save non-volatile offsets */
|
|
#define STK_REG(i) (112 + ((i)-14)*8)
|
|
|
|
|
|
#ifndef CONFIG_PPC_64K_PAGES
|
|
|
|
/*****************************************************************************
|
|
* *
|
|
* 4K SW & 4K HW pages implementation *
|
|
* *
|
|
*****************************************************************************/
|
|
|
|
|
|
/*
|
|
* _hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
|
|
* pte_t *ptep, unsigned long trap, int local)
|
|
*
|
|
* Adds a 4K page to the hash table in a segment of 4K pages only
|
|
*/
|
|
|
|
_GLOBAL(__hash_page_4K)
|
|
mflr r0
|
|
std r0,16(r1)
|
|
stdu r1,-STACKFRAMESIZE(r1)
|
|
/* Save all params that we need after a function call */
|
|
std r6,STK_PARM(r6)(r1)
|
|
std r8,STK_PARM(r8)(r1)
|
|
|
|
/* Add _PAGE_PRESENT to access */
|
|
ori r4,r4,_PAGE_PRESENT
|
|
|
|
/* Save non-volatile registers.
|
|
* r31 will hold "old PTE"
|
|
* r30 is "new PTE"
|
|
* r29 is "va"
|
|
* r28 is a hash value
|
|
* r27 is hashtab mask (maybe dynamic patched instead ?)
|
|
*/
|
|
std r27,STK_REG(r27)(r1)
|
|
std r28,STK_REG(r28)(r1)
|
|
std r29,STK_REG(r29)(r1)
|
|
std r30,STK_REG(r30)(r1)
|
|
std r31,STK_REG(r31)(r1)
|
|
|
|
/* Step 1:
|
|
*
|
|
* Check permissions, atomically mark the linux PTE busy
|
|
* and hashed.
|
|
*/
|
|
1:
|
|
ldarx r31,0,r6
|
|
/* Check access rights (access & ~(pte_val(*ptep))) */
|
|
andc. r0,r4,r31
|
|
bne- htab_wrong_access
|
|
/* Check if PTE is busy */
|
|
andi. r0,r31,_PAGE_BUSY
|
|
/* If so, just bail out and refault if needed. Someone else
|
|
* is changing this PTE anyway and might hash it.
|
|
*/
|
|
bne- htab_bail_ok
|
|
|
|
/* Prepare new PTE value (turn access RW into DIRTY, then
|
|
* add BUSY,HASHPTE and ACCESSED)
|
|
*/
|
|
rlwinm r30,r4,32-9+7,31-7,31-7 /* _PAGE_RW -> _PAGE_DIRTY */
|
|
or r30,r30,r31
|
|
ori r30,r30,_PAGE_BUSY | _PAGE_ACCESSED | _PAGE_HASHPTE
|
|
/* Write the linux PTE atomically (setting busy) */
|
|
stdcx. r30,0,r6
|
|
bne- 1b
|
|
isync
|
|
|
|
/* Step 2:
|
|
*
|
|
* Insert/Update the HPTE in the hash table. At this point,
|
|
* r4 (access) is re-useable, we use it for the new HPTE flags
|
|
*/
|
|
|
|
/* Calc va and put it in r29 */
|
|
rldicr r29,r5,28,63-28
|
|
rldicl r3,r3,0,36
|
|
or r29,r3,r29
|
|
|
|
/* Calculate hash value for primary slot and store it in r28 */
|
|
rldicl r5,r5,0,25 /* vsid & 0x0000007fffffffff */
|
|
rldicl r0,r3,64-12,48 /* (ea >> 12) & 0xffff */
|
|
xor r28,r5,r0
|
|
|
|
/* Convert linux PTE bits into HW equivalents */
|
|
andi. r3,r30,0x1fe /* Get basic set of flags */
|
|
xori r3,r3,HPTE_R_N /* _PAGE_EXEC -> NOEXEC */
|
|
rlwinm r0,r30,32-9+1,30,30 /* _PAGE_RW -> _PAGE_USER (r0) */
|
|
rlwinm r4,r30,32-7+1,30,30 /* _PAGE_DIRTY -> _PAGE_USER (r4) */
|
|
and r0,r0,r4 /* _PAGE_RW & _PAGE_DIRTY ->r0 bit 30*/
|
|
andc r0,r30,r0 /* r0 = pte & ~r0 */
|
|
rlwimi r3,r0,32-1,31,31 /* Insert result into PP lsb */
|
|
|
|
/* We eventually do the icache sync here (maybe inline that
|
|
* code rather than call a C function...)
|
|
*/
|
|
BEGIN_FTR_SECTION
|
|
mr r4,r30
|
|
mr r5,r7
|
|
bl .hash_page_do_lazy_icache
|
|
END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
|
|
|
|
/* At this point, r3 contains new PP bits, save them in
|
|
* place of "access" in the param area (sic)
|
|
*/
|
|
std r3,STK_PARM(r4)(r1)
|
|
|
|
/* Get htab_hash_mask */
|
|
ld r4,htab_hash_mask@got(2)
|
|
ld r27,0(r4) /* htab_hash_mask -> r27 */
|
|
|
|
/* Check if we may already be in the hashtable, in this case, we
|
|
* go to out-of-line code to try to modify the HPTE
|
|
*/
|
|
andi. r0,r31,_PAGE_HASHPTE
|
|
bne htab_modify_pte
|
|
|
|
htab_insert_pte:
|
|
/* Clear hpte bits in new pte (we also clear BUSY btw) and
|
|
* add _PAGE_HASHPTE
|
|
*/
|
|
lis r0,_PAGE_HPTEFLAGS@h
|
|
ori r0,r0,_PAGE_HPTEFLAGS@l
|
|
andc r30,r30,r0
|
|
ori r30,r30,_PAGE_HASHPTE
|
|
|
|
/* physical address r5 */
|
|
rldicl r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT
|
|
sldi r5,r5,PAGE_SHIFT
|
|
|
|
/* Calculate primary group hash */
|
|
and r0,r28,r27
|
|
rldicr r3,r0,3,63-3 /* r3 = (hash & mask) << 3 */
|
|
|
|
/* Call ppc_md.hpte_insert */
|
|
ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */
|
|
mr r4,r29 /* Retreive va */
|
|
li r7,0 /* !bolted, !secondary */
|
|
li r8,MMU_PAGE_4K /* page size */
|
|
_GLOBAL(htab_call_hpte_insert1)
|
|
bl . /* Patched by htab_finish_init() */
|
|
cmpdi 0,r3,0
|
|
bge htab_pte_insert_ok /* Insertion successful */
|
|
cmpdi 0,r3,-2 /* Critical failure */
|
|
beq- htab_pte_insert_failure
|
|
|
|
/* Now try secondary slot */
|
|
|
|
/* physical address r5 */
|
|
rldicl r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT
|
|
sldi r5,r5,PAGE_SHIFT
|
|
|
|
/* Calculate secondary group hash */
|
|
andc r0,r27,r28
|
|
rldicr r3,r0,3,63-3 /* r0 = (~hash & mask) << 3 */
|
|
|
|
/* Call ppc_md.hpte_insert */
|
|
ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */
|
|
mr r4,r29 /* Retreive va */
|
|
li r7,HPTE_V_SECONDARY /* !bolted, secondary */
|
|
li r8,MMU_PAGE_4K /* page size */
|
|
_GLOBAL(htab_call_hpte_insert2)
|
|
bl . /* Patched by htab_finish_init() */
|
|
cmpdi 0,r3,0
|
|
bge+ htab_pte_insert_ok /* Insertion successful */
|
|
cmpdi 0,r3,-2 /* Critical failure */
|
|
beq- htab_pte_insert_failure
|
|
|
|
/* Both are full, we need to evict something */
|
|
mftb r0
|
|
/* Pick a random group based on TB */
|
|
andi. r0,r0,1
|
|
mr r5,r28
|
|
bne 2f
|
|
not r5,r5
|
|
2: and r0,r5,r27
|
|
rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */
|
|
/* Call ppc_md.hpte_remove */
|
|
_GLOBAL(htab_call_hpte_remove)
|
|
bl . /* Patched by htab_finish_init() */
|
|
|
|
/* Try all again */
|
|
b htab_insert_pte
|
|
|
|
htab_bail_ok:
|
|
li r3,0
|
|
b htab_bail
|
|
|
|
htab_pte_insert_ok:
|
|
/* Insert slot number & secondary bit in PTE */
|
|
rldimi r30,r3,12,63-15
|
|
|
|
/* Write out the PTE with a normal write
|
|
* (maybe add eieio may be good still ?)
|
|
*/
|
|
htab_write_out_pte:
|
|
ld r6,STK_PARM(r6)(r1)
|
|
std r30,0(r6)
|
|
li r3, 0
|
|
htab_bail:
|
|
ld r27,STK_REG(r27)(r1)
|
|
ld r28,STK_REG(r28)(r1)
|
|
ld r29,STK_REG(r29)(r1)
|
|
ld r30,STK_REG(r30)(r1)
|
|
ld r31,STK_REG(r31)(r1)
|
|
addi r1,r1,STACKFRAMESIZE
|
|
ld r0,16(r1)
|
|
mtlr r0
|
|
blr
|
|
|
|
htab_modify_pte:
|
|
/* Keep PP bits in r4 and slot idx from the PTE around in r3 */
|
|
mr r4,r3
|
|
rlwinm r3,r31,32-12,29,31
|
|
|
|
/* Secondary group ? if yes, get a inverted hash value */
|
|
mr r5,r28
|
|
andi. r0,r31,_PAGE_SECONDARY
|
|
beq 1f
|
|
not r5,r5
|
|
1:
|
|
/* Calculate proper slot value for ppc_md.hpte_updatepp */
|
|
and r0,r5,r27
|
|
rldicr r0,r0,3,63-3 /* r0 = (hash & mask) << 3 */
|
|
add r3,r0,r3 /* add slot idx */
|
|
|
|
/* Call ppc_md.hpte_updatepp */
|
|
mr r5,r29 /* va */
|
|
li r6,MMU_PAGE_4K /* page size */
|
|
ld r7,STK_PARM(r8)(r1) /* get "local" param */
|
|
_GLOBAL(htab_call_hpte_updatepp)
|
|
bl . /* Patched by htab_finish_init() */
|
|
|
|
/* if we failed because typically the HPTE wasn't really here
|
|
* we try an insertion.
|
|
*/
|
|
cmpdi 0,r3,-1
|
|
beq- htab_insert_pte
|
|
|
|
/* Clear the BUSY bit and Write out the PTE */
|
|
li r0,_PAGE_BUSY
|
|
andc r30,r30,r0
|
|
b htab_write_out_pte
|
|
|
|
htab_wrong_access:
|
|
/* Bail out clearing reservation */
|
|
stdcx. r31,0,r6
|
|
li r3,1
|
|
b htab_bail
|
|
|
|
htab_pte_insert_failure:
|
|
/* Bail out restoring old PTE */
|
|
ld r6,STK_PARM(r6)(r1)
|
|
std r31,0(r6)
|
|
li r3,-1
|
|
b htab_bail
|
|
|
|
|
|
#else /* CONFIG_PPC_64K_PAGES */
|
|
|
|
|
|
/*****************************************************************************
|
|
* *
|
|
* 64K SW & 4K or 64K HW in a 4K segment pages implementation *
|
|
* *
|
|
*****************************************************************************/
|
|
|
|
/* _hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
|
|
* pte_t *ptep, unsigned long trap, int local)
|
|
*/
|
|
|
|
/*
|
|
* For now, we do NOT implement Admixed pages
|
|
*/
|
|
_GLOBAL(__hash_page_4K)
|
|
mflr r0
|
|
std r0,16(r1)
|
|
stdu r1,-STACKFRAMESIZE(r1)
|
|
/* Save all params that we need after a function call */
|
|
std r6,STK_PARM(r6)(r1)
|
|
std r8,STK_PARM(r8)(r1)
|
|
|
|
/* Add _PAGE_PRESENT to access */
|
|
ori r4,r4,_PAGE_PRESENT
|
|
|
|
/* Save non-volatile registers.
|
|
* r31 will hold "old PTE"
|
|
* r30 is "new PTE"
|
|
* r29 is "va"
|
|
* r28 is a hash value
|
|
* r27 is hashtab mask (maybe dynamic patched instead ?)
|
|
* r26 is the hidx mask
|
|
* r25 is the index in combo page
|
|
*/
|
|
std r25,STK_REG(r25)(r1)
|
|
std r26,STK_REG(r26)(r1)
|
|
std r27,STK_REG(r27)(r1)
|
|
std r28,STK_REG(r28)(r1)
|
|
std r29,STK_REG(r29)(r1)
|
|
std r30,STK_REG(r30)(r1)
|
|
std r31,STK_REG(r31)(r1)
|
|
|
|
/* Step 1:
|
|
*
|
|
* Check permissions, atomically mark the linux PTE busy
|
|
* and hashed.
|
|
*/
|
|
1:
|
|
ldarx r31,0,r6
|
|
/* Check access rights (access & ~(pte_val(*ptep))) */
|
|
andc. r0,r4,r31
|
|
bne- htab_wrong_access
|
|
/* Check if PTE is busy */
|
|
andi. r0,r31,_PAGE_BUSY
|
|
/* If so, just bail out and refault if needed. Someone else
|
|
* is changing this PTE anyway and might hash it.
|
|
*/
|
|
bne- htab_bail_ok
|
|
/* Prepare new PTE value (turn access RW into DIRTY, then
|
|
* add BUSY and ACCESSED)
|
|
*/
|
|
rlwinm r30,r4,32-9+7,31-7,31-7 /* _PAGE_RW -> _PAGE_DIRTY */
|
|
or r30,r30,r31
|
|
ori r30,r30,_PAGE_BUSY | _PAGE_ACCESSED | _PAGE_HASHPTE
|
|
/* Write the linux PTE atomically (setting busy) */
|
|
stdcx. r30,0,r6
|
|
bne- 1b
|
|
isync
|
|
|
|
/* Step 2:
|
|
*
|
|
* Insert/Update the HPTE in the hash table. At this point,
|
|
* r4 (access) is re-useable, we use it for the new HPTE flags
|
|
*/
|
|
|
|
/* Load the hidx index */
|
|
rldicl r25,r3,64-12,60
|
|
|
|
/* Calc va and put it in r29 */
|
|
rldicr r29,r5,28,63-28 /* r29 = (vsid << 28) */
|
|
rldicl r3,r3,0,36 /* r3 = (ea & 0x0fffffff) */
|
|
or r29,r3,r29 /* r29 = va
|
|
|
|
/* Calculate hash value for primary slot and store it in r28 */
|
|
rldicl r5,r5,0,25 /* vsid & 0x0000007fffffffff */
|
|
rldicl r0,r3,64-12,48 /* (ea >> 12) & 0xffff */
|
|
xor r28,r5,r0
|
|
|
|
/* Convert linux PTE bits into HW equivalents */
|
|
andi. r3,r30,0x1fe /* Get basic set of flags */
|
|
xori r3,r3,HPTE_R_N /* _PAGE_EXEC -> NOEXEC */
|
|
rlwinm r0,r30,32-9+1,30,30 /* _PAGE_RW -> _PAGE_USER (r0) */
|
|
rlwinm r4,r30,32-7+1,30,30 /* _PAGE_DIRTY -> _PAGE_USER (r4) */
|
|
and r0,r0,r4 /* _PAGE_RW & _PAGE_DIRTY ->r0 bit 30*/
|
|
andc r0,r30,r0 /* r0 = pte & ~r0 */
|
|
rlwimi r3,r0,32-1,31,31 /* Insert result into PP lsb */
|
|
|
|
/* We eventually do the icache sync here (maybe inline that
|
|
* code rather than call a C function...)
|
|
*/
|
|
BEGIN_FTR_SECTION
|
|
mr r4,r30
|
|
mr r5,r7
|
|
bl .hash_page_do_lazy_icache
|
|
END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
|
|
|
|
/* At this point, r3 contains new PP bits, save them in
|
|
* place of "access" in the param area (sic)
|
|
*/
|
|
std r3,STK_PARM(r4)(r1)
|
|
|
|
/* Get htab_hash_mask */
|
|
ld r4,htab_hash_mask@got(2)
|
|
ld r27,0(r4) /* htab_hash_mask -> r27 */
|
|
|
|
/* Check if we may already be in the hashtable, in this case, we
|
|
* go to out-of-line code to try to modify the HPTE. We look for
|
|
* the bit at (1 >> (index + 32))
|
|
*/
|
|
andi. r0,r31,_PAGE_HASHPTE
|
|
li r26,0 /* Default hidx */
|
|
beq htab_insert_pte
|
|
ld r6,STK_PARM(r6)(r1)
|
|
ori r26,r6,0x8000 /* Load the hidx mask */
|
|
ld r26,0(r26)
|
|
addi r5,r25,36 /* Check actual HPTE_SUB bit, this */
|
|
rldcr. r0,r31,r5,0 /* must match pgtable.h definition */
|
|
bne htab_modify_pte
|
|
|
|
htab_insert_pte:
|
|
/* real page number in r5, PTE RPN value + index */
|
|
rldicl r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT
|
|
sldi r5,r5,PAGE_SHIFT-HW_PAGE_SHIFT
|
|
add r5,r5,r25
|
|
sldi r5,r5,HW_PAGE_SHIFT
|
|
|
|
/* Calculate primary group hash */
|
|
and r0,r28,r27
|
|
rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */
|
|
|
|
/* Call ppc_md.hpte_insert */
|
|
ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */
|
|
mr r4,r29 /* Retreive va */
|
|
li r7,0 /* !bolted, !secondary */
|
|
li r8,MMU_PAGE_4K /* page size */
|
|
_GLOBAL(htab_call_hpte_insert1)
|
|
bl . /* patched by htab_finish_init() */
|
|
cmpdi 0,r3,0
|
|
bge htab_pte_insert_ok /* Insertion successful */
|
|
cmpdi 0,r3,-2 /* Critical failure */
|
|
beq- htab_pte_insert_failure
|
|
|
|
/* Now try secondary slot */
|
|
|
|
/* real page number in r5, PTE RPN value + index */
|
|
rldicl r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT
|
|
sldi r5,r5,PAGE_SHIFT-HW_PAGE_SHIFT
|
|
add r5,r5,r25
|
|
sldi r5,r5,HW_PAGE_SHIFT
|
|
|
|
/* Calculate secondary group hash */
|
|
andc r0,r27,r28
|
|
rldicr r3,r0,3,63-3 /* r0 = (~hash & mask) << 3 */
|
|
|
|
/* Call ppc_md.hpte_insert */
|
|
ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */
|
|
mr r4,r29 /* Retreive va */
|
|
li r7,HPTE_V_SECONDARY /* !bolted, secondary */
|
|
li r8,MMU_PAGE_4K /* page size */
|
|
_GLOBAL(htab_call_hpte_insert2)
|
|
bl . /* patched by htab_finish_init() */
|
|
cmpdi 0,r3,0
|
|
bge+ htab_pte_insert_ok /* Insertion successful */
|
|
cmpdi 0,r3,-2 /* Critical failure */
|
|
beq- htab_pte_insert_failure
|
|
|
|
/* Both are full, we need to evict something */
|
|
mftb r0
|
|
/* Pick a random group based on TB */
|
|
andi. r0,r0,1
|
|
mr r5,r28
|
|
bne 2f
|
|
not r5,r5
|
|
2: and r0,r5,r27
|
|
rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */
|
|
/* Call ppc_md.hpte_remove */
|
|
_GLOBAL(htab_call_hpte_remove)
|
|
bl . /* patched by htab_finish_init() */
|
|
|
|
/* Try all again */
|
|
b htab_insert_pte
|
|
|
|
htab_bail_ok:
|
|
li r3,0
|
|
b htab_bail
|
|
|
|
htab_pte_insert_ok:
|
|
/* Insert slot number & secondary bit in PTE second half,
|
|
* clear _PAGE_BUSY and set approriate HPTE slot bit
|
|
*/
|
|
ld r6,STK_PARM(r6)(r1)
|
|
li r0,_PAGE_BUSY
|
|
andc r30,r30,r0
|
|
/* HPTE SUB bit */
|
|
li r0,1
|
|
subfic r5,r25,27 /* Must match bit position in */
|
|
sld r0,r0,r5 /* pgtable.h */
|
|
or r30,r30,r0
|
|
/* hindx */
|
|
sldi r5,r25,2
|
|
sld r3,r3,r5
|
|
li r4,0xf
|
|
sld r4,r4,r5
|
|
andc r26,r26,r4
|
|
or r26,r26,r3
|
|
ori r5,r6,0x8000
|
|
std r26,0(r5)
|
|
lwsync
|
|
std r30,0(r6)
|
|
li r3, 0
|
|
htab_bail:
|
|
ld r25,STK_REG(r25)(r1)
|
|
ld r26,STK_REG(r26)(r1)
|
|
ld r27,STK_REG(r27)(r1)
|
|
ld r28,STK_REG(r28)(r1)
|
|
ld r29,STK_REG(r29)(r1)
|
|
ld r30,STK_REG(r30)(r1)
|
|
ld r31,STK_REG(r31)(r1)
|
|
addi r1,r1,STACKFRAMESIZE
|
|
ld r0,16(r1)
|
|
mtlr r0
|
|
blr
|
|
|
|
htab_modify_pte:
|
|
/* Keep PP bits in r4 and slot idx from the PTE around in r3 */
|
|
mr r4,r3
|
|
sldi r5,r25,2
|
|
srd r3,r26,r5
|
|
|
|
/* Secondary group ? if yes, get a inverted hash value */
|
|
mr r5,r28
|
|
andi. r0,r3,0x8 /* page secondary ? */
|
|
beq 1f
|
|
not r5,r5
|
|
1: andi. r3,r3,0x7 /* extract idx alone */
|
|
|
|
/* Calculate proper slot value for ppc_md.hpte_updatepp */
|
|
and r0,r5,r27
|
|
rldicr r0,r0,3,63-3 /* r0 = (hash & mask) << 3 */
|
|
add r3,r0,r3 /* add slot idx */
|
|
|
|
/* Call ppc_md.hpte_updatepp */
|
|
mr r5,r29 /* va */
|
|
li r6,MMU_PAGE_4K /* page size */
|
|
ld r7,STK_PARM(r8)(r1) /* get "local" param */
|
|
_GLOBAL(htab_call_hpte_updatepp)
|
|
bl . /* patched by htab_finish_init() */
|
|
|
|
/* if we failed because typically the HPTE wasn't really here
|
|
* we try an insertion.
|
|
*/
|
|
cmpdi 0,r3,-1
|
|
beq- htab_insert_pte
|
|
|
|
/* Clear the BUSY bit and Write out the PTE */
|
|
li r0,_PAGE_BUSY
|
|
andc r30,r30,r0
|
|
ld r6,STK_PARM(r6)(r1)
|
|
std r30,0(r6)
|
|
li r3,0
|
|
b htab_bail
|
|
|
|
htab_wrong_access:
|
|
/* Bail out clearing reservation */
|
|
stdcx. r31,0,r6
|
|
li r3,1
|
|
b htab_bail
|
|
|
|
htab_pte_insert_failure:
|
|
/* Bail out restoring old PTE */
|
|
ld r6,STK_PARM(r6)(r1)
|
|
std r31,0(r6)
|
|
li r3,-1
|
|
b htab_bail
|
|
|
|
|
|
/*****************************************************************************
|
|
* *
|
|
* 64K SW & 64K HW in a 64K segment pages implementation *
|
|
* *
|
|
*****************************************************************************/
|
|
|
|
_GLOBAL(__hash_page_64K)
|
|
mflr r0
|
|
std r0,16(r1)
|
|
stdu r1,-STACKFRAMESIZE(r1)
|
|
/* Save all params that we need after a function call */
|
|
std r6,STK_PARM(r6)(r1)
|
|
std r8,STK_PARM(r8)(r1)
|
|
|
|
/* Add _PAGE_PRESENT to access */
|
|
ori r4,r4,_PAGE_PRESENT
|
|
|
|
/* Save non-volatile registers.
|
|
* r31 will hold "old PTE"
|
|
* r30 is "new PTE"
|
|
* r29 is "va"
|
|
* r28 is a hash value
|
|
* r27 is hashtab mask (maybe dynamic patched instead ?)
|
|
*/
|
|
std r27,STK_REG(r27)(r1)
|
|
std r28,STK_REG(r28)(r1)
|
|
std r29,STK_REG(r29)(r1)
|
|
std r30,STK_REG(r30)(r1)
|
|
std r31,STK_REG(r31)(r1)
|
|
|
|
/* Step 1:
|
|
*
|
|
* Check permissions, atomically mark the linux PTE busy
|
|
* and hashed.
|
|
*/
|
|
1:
|
|
ldarx r31,0,r6
|
|
/* Check access rights (access & ~(pte_val(*ptep))) */
|
|
andc. r0,r4,r31
|
|
bne- ht64_wrong_access
|
|
/* Check if PTE is busy */
|
|
andi. r0,r31,_PAGE_BUSY
|
|
/* If so, just bail out and refault if needed. Someone else
|
|
* is changing this PTE anyway and might hash it.
|
|
*/
|
|
bne- ht64_bail_ok
|
|
/* Prepare new PTE value (turn access RW into DIRTY, then
|
|
* add BUSY,HASHPTE and ACCESSED)
|
|
*/
|
|
rlwinm r30,r4,32-9+7,31-7,31-7 /* _PAGE_RW -> _PAGE_DIRTY */
|
|
or r30,r30,r31
|
|
ori r30,r30,_PAGE_BUSY | _PAGE_ACCESSED | _PAGE_HASHPTE
|
|
/* Write the linux PTE atomically (setting busy) */
|
|
stdcx. r30,0,r6
|
|
bne- 1b
|
|
isync
|
|
|
|
/* Step 2:
|
|
*
|
|
* Insert/Update the HPTE in the hash table. At this point,
|
|
* r4 (access) is re-useable, we use it for the new HPTE flags
|
|
*/
|
|
|
|
/* Calc va and put it in r29 */
|
|
rldicr r29,r5,28,63-28
|
|
rldicl r3,r3,0,36
|
|
or r29,r3,r29
|
|
|
|
/* Calculate hash value for primary slot and store it in r28 */
|
|
rldicl r5,r5,0,25 /* vsid & 0x0000007fffffffff */
|
|
rldicl r0,r3,64-16,52 /* (ea >> 16) & 0xfff */
|
|
xor r28,r5,r0
|
|
|
|
/* Convert linux PTE bits into HW equivalents */
|
|
andi. r3,r30,0x1fe /* Get basic set of flags */
|
|
xori r3,r3,HPTE_R_N /* _PAGE_EXEC -> NOEXEC */
|
|
rlwinm r0,r30,32-9+1,30,30 /* _PAGE_RW -> _PAGE_USER (r0) */
|
|
rlwinm r4,r30,32-7+1,30,30 /* _PAGE_DIRTY -> _PAGE_USER (r4) */
|
|
and r0,r0,r4 /* _PAGE_RW & _PAGE_DIRTY ->r0 bit 30*/
|
|
andc r0,r30,r0 /* r0 = pte & ~r0 */
|
|
rlwimi r3,r0,32-1,31,31 /* Insert result into PP lsb */
|
|
|
|
/* We eventually do the icache sync here (maybe inline that
|
|
* code rather than call a C function...)
|
|
*/
|
|
BEGIN_FTR_SECTION
|
|
mr r4,r30
|
|
mr r5,r7
|
|
bl .hash_page_do_lazy_icache
|
|
END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
|
|
|
|
/* At this point, r3 contains new PP bits, save them in
|
|
* place of "access" in the param area (sic)
|
|
*/
|
|
std r3,STK_PARM(r4)(r1)
|
|
|
|
/* Get htab_hash_mask */
|
|
ld r4,htab_hash_mask@got(2)
|
|
ld r27,0(r4) /* htab_hash_mask -> r27 */
|
|
|
|
/* Check if we may already be in the hashtable, in this case, we
|
|
* go to out-of-line code to try to modify the HPTE
|
|
*/
|
|
andi. r0,r31,_PAGE_HASHPTE
|
|
bne ht64_modify_pte
|
|
|
|
ht64_insert_pte:
|
|
/* Clear hpte bits in new pte (we also clear BUSY btw) and
|
|
* add _PAGE_HASHPTE
|
|
*/
|
|
lis r0,_PAGE_HPTEFLAGS@h
|
|
ori r0,r0,_PAGE_HPTEFLAGS@l
|
|
andc r30,r30,r0
|
|
ori r30,r30,_PAGE_HASHPTE
|
|
|
|
/* Phyical address in r5 */
|
|
rldicl r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT
|
|
sldi r5,r5,PAGE_SHIFT
|
|
|
|
/* Calculate primary group hash */
|
|
and r0,r28,r27
|
|
rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */
|
|
|
|
/* Call ppc_md.hpte_insert */
|
|
ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */
|
|
mr r4,r29 /* Retreive va */
|
|
li r7,0 /* !bolted, !secondary */
|
|
li r8,MMU_PAGE_64K
|
|
_GLOBAL(ht64_call_hpte_insert1)
|
|
bl . /* patched by htab_finish_init() */
|
|
cmpdi 0,r3,0
|
|
bge ht64_pte_insert_ok /* Insertion successful */
|
|
cmpdi 0,r3,-2 /* Critical failure */
|
|
beq- ht64_pte_insert_failure
|
|
|
|
/* Now try secondary slot */
|
|
|
|
/* Phyical address in r5 */
|
|
rldicl r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT
|
|
sldi r5,r5,PAGE_SHIFT
|
|
|
|
/* Calculate secondary group hash */
|
|
andc r0,r27,r28
|
|
rldicr r3,r0,3,63-3 /* r0 = (~hash & mask) << 3 */
|
|
|
|
/* Call ppc_md.hpte_insert */
|
|
ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */
|
|
mr r4,r29 /* Retreive va */
|
|
li r7,HPTE_V_SECONDARY /* !bolted, secondary */
|
|
li r8,MMU_PAGE_64K
|
|
_GLOBAL(ht64_call_hpte_insert2)
|
|
bl . /* patched by htab_finish_init() */
|
|
cmpdi 0,r3,0
|
|
bge+ ht64_pte_insert_ok /* Insertion successful */
|
|
cmpdi 0,r3,-2 /* Critical failure */
|
|
beq- ht64_pte_insert_failure
|
|
|
|
/* Both are full, we need to evict something */
|
|
mftb r0
|
|
/* Pick a random group based on TB */
|
|
andi. r0,r0,1
|
|
mr r5,r28
|
|
bne 2f
|
|
not r5,r5
|
|
2: and r0,r5,r27
|
|
rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */
|
|
/* Call ppc_md.hpte_remove */
|
|
_GLOBAL(ht64_call_hpte_remove)
|
|
bl . /* patched by htab_finish_init() */
|
|
|
|
/* Try all again */
|
|
b ht64_insert_pte
|
|
|
|
ht64_bail_ok:
|
|
li r3,0
|
|
b ht64_bail
|
|
|
|
ht64_pte_insert_ok:
|
|
/* Insert slot number & secondary bit in PTE */
|
|
rldimi r30,r3,12,63-15
|
|
|
|
/* Write out the PTE with a normal write
|
|
* (maybe add eieio may be good still ?)
|
|
*/
|
|
ht64_write_out_pte:
|
|
ld r6,STK_PARM(r6)(r1)
|
|
std r30,0(r6)
|
|
li r3, 0
|
|
ht64_bail:
|
|
ld r27,STK_REG(r27)(r1)
|
|
ld r28,STK_REG(r28)(r1)
|
|
ld r29,STK_REG(r29)(r1)
|
|
ld r30,STK_REG(r30)(r1)
|
|
ld r31,STK_REG(r31)(r1)
|
|
addi r1,r1,STACKFRAMESIZE
|
|
ld r0,16(r1)
|
|
mtlr r0
|
|
blr
|
|
|
|
ht64_modify_pte:
|
|
/* Keep PP bits in r4 and slot idx from the PTE around in r3 */
|
|
mr r4,r3
|
|
rlwinm r3,r31,32-12,29,31
|
|
|
|
/* Secondary group ? if yes, get a inverted hash value */
|
|
mr r5,r28
|
|
andi. r0,r31,_PAGE_F_SECOND
|
|
beq 1f
|
|
not r5,r5
|
|
1:
|
|
/* Calculate proper slot value for ppc_md.hpte_updatepp */
|
|
and r0,r5,r27
|
|
rldicr r0,r0,3,63-3 /* r0 = (hash & mask) << 3 */
|
|
add r3,r0,r3 /* add slot idx */
|
|
|
|
/* Call ppc_md.hpte_updatepp */
|
|
mr r5,r29 /* va */
|
|
li r6,MMU_PAGE_64K
|
|
ld r7,STK_PARM(r8)(r1) /* get "local" param */
|
|
_GLOBAL(ht64_call_hpte_updatepp)
|
|
bl . /* patched by htab_finish_init() */
|
|
|
|
/* if we failed because typically the HPTE wasn't really here
|
|
* we try an insertion.
|
|
*/
|
|
cmpdi 0,r3,-1
|
|
beq- ht64_insert_pte
|
|
|
|
/* Clear the BUSY bit and Write out the PTE */
|
|
li r0,_PAGE_BUSY
|
|
andc r30,r30,r0
|
|
b ht64_write_out_pte
|
|
|
|
ht64_wrong_access:
|
|
/* Bail out clearing reservation */
|
|
stdcx. r31,0,r6
|
|
li r3,1
|
|
b ht64_bail
|
|
|
|
ht64_pte_insert_failure:
|
|
/* Bail out restoring old PTE */
|
|
ld r6,STK_PARM(r6)(r1)
|
|
std r31,0(r6)
|
|
li r3,-1
|
|
b ht64_bail
|
|
|
|
|
|
#endif /* CONFIG_PPC_64K_PAGES */
|
|
|
|
|
|
/*****************************************************************************
|
|
* *
|
|
* Huge pages implementation is in hugetlbpage.c *
|
|
* *
|
|
*****************************************************************************/
|