android_kernel_xiaomi_sm8350/arch/arm/mach-imx/irq.c
Linus Torvalds 0cd61b68c3 Initial blind fixup for arm for irq changes
Untested, but this should fix up the bulk of the totally mechanical
issues, and should make the actual detail fixing easier.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06 10:59:54 -07:00

251 lines
5.9 KiB
C

/*
* linux/arch/arm/mach-imx/irq.c
*
* Copyright (C) 1999 ARM Limited
* Copyright (C) 2002 Shane Nay (shane@minirl.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* 03/03/2004 Sascha Hauer <sascha@saschahauer.de>
* Copied from the motorola bsp package and added gpio demux
* interrupt handler
*/
#include <linux/init.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/mach/irq.h>
/*
*
* We simply use the ENABLE DISABLE registers inside of the IMX
* to turn on/off specific interrupts. FIXME- We should
* also add support for the accelerated interrupt controller
* by putting offets to irq jump code in the appropriate
* places.
*
*/
#define INTENNUM_OFF 0x8
#define INTDISNUM_OFF 0xC
#define VA_AITC_BASE IO_ADDRESS(IMX_AITC_BASE)
#define IMX_AITC_INTDISNUM (VA_AITC_BASE + INTDISNUM_OFF)
#define IMX_AITC_INTENNUM (VA_AITC_BASE + INTENNUM_OFF)
#if 0
#define DEBUG_IRQ(fmt...) printk(fmt)
#else
#define DEBUG_IRQ(fmt...) do { } while (0)
#endif
static void
imx_mask_irq(unsigned int irq)
{
__raw_writel(irq, IMX_AITC_INTDISNUM);
}
static void
imx_unmask_irq(unsigned int irq)
{
__raw_writel(irq, IMX_AITC_INTENNUM);
}
static int
imx_gpio_irq_type(unsigned int _irq, unsigned int type)
{
unsigned int irq_type = 0, irq, reg, bit;
irq = _irq - IRQ_GPIOA(0);
reg = irq >> 5;
bit = 1 << (irq % 32);
if (type == IRQT_PROBE) {
/* Don't mess with enabled GPIOs using preconfigured edges or
GPIOs set to alternate function during probe */
/* TODO: support probe */
// if ((GPIO_IRQ_rising_edge[idx] | GPIO_IRQ_falling_edge[idx]) &
// GPIO_bit(gpio))
// return 0;
// if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2)))
// return 0;
// type = __IRQT_RISEDGE | __IRQT_FALEDGE;
}
GIUS(reg) |= bit;
DDIR(reg) &= ~(bit);
DEBUG_IRQ("setting type of irq %d to ", _irq);
if (type & __IRQT_RISEDGE) {
DEBUG_IRQ("rising edges\n");
irq_type = 0x0;
}
if (type & __IRQT_FALEDGE) {
DEBUG_IRQ("falling edges\n");
irq_type = 0x1;
}
if (type & __IRQT_LOWLVL) {
DEBUG_IRQ("low level\n");
irq_type = 0x3;
}
if (type & __IRQT_HIGHLVL) {
DEBUG_IRQ("high level\n");
irq_type = 0x2;
}
if (irq % 32 < 16) {
ICR1(reg) = (ICR1(reg) & ~(0x3 << ((irq % 16) * 2))) |
(irq_type << ((irq % 16) * 2));
} else {
ICR2(reg) = (ICR2(reg) & ~(0x3 << ((irq % 16) * 2))) |
(irq_type << ((irq % 16) * 2));
}
return 0;
}
static void
imx_gpio_ack_irq(unsigned int irq)
{
DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, irq);
ISR(IRQ_TO_REG(irq)) = 1 << ((irq - IRQ_GPIOA(0)) % 32);
}
static void
imx_gpio_mask_irq(unsigned int irq)
{
DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, irq);
IMR(IRQ_TO_REG(irq)) &= ~( 1 << ((irq - IRQ_GPIOA(0)) % 32));
}
static void
imx_gpio_unmask_irq(unsigned int irq)
{
DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, irq);
IMR(IRQ_TO_REG(irq)) |= 1 << ((irq - IRQ_GPIOA(0)) % 32);
}
static void
imx_gpio_handler(unsigned int mask, unsigned int irq,
struct irqdesc *desc)
{
desc = irq_desc + irq;
while (mask) {
if (mask & 1) {
DEBUG_IRQ("handling irq %d\n", irq);
desc_handle_irq(irq, desc);
}
irq++;
desc++;
mask >>= 1;
}
}
static void
imx_gpioa_demux_handler(unsigned int irq_unused, struct irqdesc *desc)
{
unsigned int mask, irq;
mask = ISR(0);
irq = IRQ_GPIOA(0);
imx_gpio_handler(mask, irq, desc);
}
static void
imx_gpiob_demux_handler(unsigned int irq_unused, struct irqdesc *desc)
{
unsigned int mask, irq;
mask = ISR(1);
irq = IRQ_GPIOB(0);
imx_gpio_handler(mask, irq, desc);
}
static void
imx_gpioc_demux_handler(unsigned int irq_unused, struct irqdesc *desc)
{
unsigned int mask, irq;
mask = ISR(2);
irq = IRQ_GPIOC(0);
imx_gpio_handler(mask, irq, desc);
}
static void
imx_gpiod_demux_handler(unsigned int irq_unused, struct irqdesc *desc)
{
unsigned int mask, irq;
mask = ISR(3);
irq = IRQ_GPIOD(0);
imx_gpio_handler(mask, irq, desc);
}
static struct irq_chip imx_internal_chip = {
.name = "MPU",
.ack = imx_mask_irq,
.mask = imx_mask_irq,
.unmask = imx_unmask_irq,
};
static struct irq_chip imx_gpio_chip = {
.name = "GPIO",
.ack = imx_gpio_ack_irq,
.mask = imx_gpio_mask_irq,
.unmask = imx_gpio_unmask_irq,
.set_type = imx_gpio_irq_type,
};
void __init
imx_init_irq(void)
{
unsigned int irq;
DEBUG_IRQ("Initializing imx interrupts\n");
/* Mask all interrupts initially */
IMR(0) = 0;
IMR(1) = 0;
IMR(2) = 0;
IMR(3) = 0;
for (irq = 0; irq < IMX_IRQS; irq++) {
set_irq_chip(irq, &imx_internal_chip);
set_irq_handler(irq, do_level_IRQ);
set_irq_flags(irq, IRQF_VALID);
}
for (irq = IRQ_GPIOA(0); irq < IRQ_GPIOD(32); irq++) {
set_irq_chip(irq, &imx_gpio_chip);
set_irq_handler(irq, do_edge_IRQ);
set_irq_flags(irq, IRQF_VALID);
}
set_irq_chained_handler(GPIO_INT_PORTA, imx_gpioa_demux_handler);
set_irq_chained_handler(GPIO_INT_PORTB, imx_gpiob_demux_handler);
set_irq_chained_handler(GPIO_INT_PORTC, imx_gpioc_demux_handler);
set_irq_chained_handler(GPIO_INT_PORTD, imx_gpiod_demux_handler);
/* Disable all interrupts initially. */
/* In IMX this is done in the bootloader. */
}