android_kernel_xiaomi_sm8350/arch/avr32/mach-at32ap/pio.h
David Brownell b98348bdd0 gpiolib: avr32 at32ap platform support
Teach AVR32 to use the "GPIO Library" when exposing its GPIOs, so that signals
on external chips (like GPIO expanders) can easily be used.

This mostly reorganizes some existing logic, with two minor changes in
behavior:

 - The PSR registers are used instead of the previous "gpio_mask" values,
   matching AT91 behavior and removing some duplication between that role
   and that of "pinmux_mask".

 - NR_IRQs grew to acommodate a bank of external GPIOs.  Eventually this
   number should probably become a board-specific config option.

There's a debugfs dump of status for the built-in GPIOs, showing which pins
have deglitching, pullups, or open drain drive enabled, as well as the ID
string used when requesting each IRQ.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Eric Miao <eric.miao@marvell.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:13 -08:00

181 lines
6.4 KiB
C

/*
* Atmel PIO2 Port Multiplexer support
*
* Copyright (C) 2004-2006 Atmel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ARCH_AVR32_AT32AP_PIO_H__
#define __ARCH_AVR32_AT32AP_PIO_H__
/* PIO register offsets */
#define PIO_PER 0x0000
#define PIO_PDR 0x0004
#define PIO_PSR 0x0008
#define PIO_OER 0x0010
#define PIO_ODR 0x0014
#define PIO_OSR 0x0018
#define PIO_IFER 0x0020
#define PIO_IFDR 0x0024
#define PIO_IFSR 0x0028
#define PIO_SODR 0x0030
#define PIO_CODR 0x0034
#define PIO_ODSR 0x0038
#define PIO_PDSR 0x003c
#define PIO_IER 0x0040
#define PIO_IDR 0x0044
#define PIO_IMR 0x0048
#define PIO_ISR 0x004c
#define PIO_MDER 0x0050
#define PIO_MDDR 0x0054
#define PIO_MDSR 0x0058
#define PIO_PUDR 0x0060
#define PIO_PUER 0x0064
#define PIO_PUSR 0x0068
#define PIO_ASR 0x0070
#define PIO_BSR 0x0074
#define PIO_ABSR 0x0078
#define PIO_OWER 0x00a0
#define PIO_OWDR 0x00a4
#define PIO_OWSR 0x00a8
/* Bitfields in PER */
/* Bitfields in PDR */
/* Bitfields in PSR */
/* Bitfields in OER */
/* Bitfields in ODR */
/* Bitfields in OSR */
/* Bitfields in IFER */
/* Bitfields in IFDR */
/* Bitfields in ISFR */
/* Bitfields in SODR */
/* Bitfields in CODR */
/* Bitfields in ODSR */
/* Bitfields in PDSR */
/* Bitfields in IER */
/* Bitfields in IDR */
/* Bitfields in IMR */
/* Bitfields in ISR */
/* Bitfields in MDER */
/* Bitfields in MDDR */
/* Bitfields in MDSR */
/* Bitfields in PUDR */
/* Bitfields in PUER */
/* Bitfields in PUSR */
/* Bitfields in ASR */
/* Bitfields in BSR */
/* Bitfields in ABSR */
#define PIO_P0_OFFSET 0
#define PIO_P0_SIZE 1
#define PIO_P1_OFFSET 1
#define PIO_P1_SIZE 1
#define PIO_P2_OFFSET 2
#define PIO_P2_SIZE 1
#define PIO_P3_OFFSET 3
#define PIO_P3_SIZE 1
#define PIO_P4_OFFSET 4
#define PIO_P4_SIZE 1
#define PIO_P5_OFFSET 5
#define PIO_P5_SIZE 1
#define PIO_P6_OFFSET 6
#define PIO_P6_SIZE 1
#define PIO_P7_OFFSET 7
#define PIO_P7_SIZE 1
#define PIO_P8_OFFSET 8
#define PIO_P8_SIZE 1
#define PIO_P9_OFFSET 9
#define PIO_P9_SIZE 1
#define PIO_P10_OFFSET 10
#define PIO_P10_SIZE 1
#define PIO_P11_OFFSET 11
#define PIO_P11_SIZE 1
#define PIO_P12_OFFSET 12
#define PIO_P12_SIZE 1
#define PIO_P13_OFFSET 13
#define PIO_P13_SIZE 1
#define PIO_P14_OFFSET 14
#define PIO_P14_SIZE 1
#define PIO_P15_OFFSET 15
#define PIO_P15_SIZE 1
#define PIO_P16_OFFSET 16
#define PIO_P16_SIZE 1
#define PIO_P17_OFFSET 17
#define PIO_P17_SIZE 1
#define PIO_P18_OFFSET 18
#define PIO_P18_SIZE 1
#define PIO_P19_OFFSET 19
#define PIO_P19_SIZE 1
#define PIO_P20_OFFSET 20
#define PIO_P20_SIZE 1
#define PIO_P21_OFFSET 21
#define PIO_P21_SIZE 1
#define PIO_P22_OFFSET 22
#define PIO_P22_SIZE 1
#define PIO_P23_OFFSET 23
#define PIO_P23_SIZE 1
#define PIO_P24_OFFSET 24
#define PIO_P24_SIZE 1
#define PIO_P25_OFFSET 25
#define PIO_P25_SIZE 1
#define PIO_P26_OFFSET 26
#define PIO_P26_SIZE 1
#define PIO_P27_OFFSET 27
#define PIO_P27_SIZE 1
#define PIO_P28_OFFSET 28
#define PIO_P28_SIZE 1
#define PIO_P29_OFFSET 29
#define PIO_P29_SIZE 1
#define PIO_P30_OFFSET 30
#define PIO_P30_SIZE 1
#define PIO_P31_OFFSET 31
#define PIO_P31_SIZE 1
/* Bitfields in OWER */
/* Bitfields in OWDR */
/* Bitfields in OWSR */
/* Bit manipulation macros */
#define PIO_BIT(name) (1 << PIO_##name##_OFFSET)
#define PIO_BF(name,value) (((value) & ((1 << PIO_##name##_SIZE) - 1)) << PIO_##name##_OFFSET)
#define PIO_BFEXT(name,value) (((value) >> PIO_##name##_OFFSET) & ((1 << PIO_##name##_SIZE) - 1))
#define PIO_BFINS(name,value,old) (((old) & ~(((1 << PIO_##name##_SIZE) - 1) << PIO_##name##_OFFSET)) | PIO_BF(name,value))
/* Register access macros */
#define pio_readl(port,reg) \
__raw_readl((port)->regs + PIO_##reg)
#define pio_writel(port,reg,value) \
__raw_writel((value), (port)->regs + PIO_##reg)
void at32_init_pio(struct platform_device *pdev);
#endif /* __ARCH_AVR32_AT32AP_PIO_H__ */