lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
3693ec670b
android_kernel_xiaomi_sm8350/drivers/usb/input/wacom_wac.c
David Howells 7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers 
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00

638 lines
22 KiB
C
Raw Blame History

/*
* drivers/usb/input/wacom_wac.c
*
* USB Wacom Graphire and Wacom Intuos tablet support - Wacom specific code
*
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include "wacom.h"
#include "wacom_wac.h"
static int wacom_penpartner_irq(struct wacom_wac *wacom, void *wcombo)
{
unsigned char *data = wacom->data;
switch (data[0]) {
case 1:
if (data[5] & 0x80) {
wacom->tool[0] = (data[5] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
wacom->id[0] = (data[5] & 0x20) ? ERASER_DEVICE_ID : STYLUS_DEVICE_ID;
wacom_report_key(wcombo, wacom->tool[0], 1);
wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); /* report tool id */
wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1]));
wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3]));
wacom_report_abs(wcombo, ABS_PRESSURE, (signed char)data[6] + 127);
wacom_report_key(wcombo, BTN_TOUCH, ((signed char)data[6] > -127));
wacom_report_key(wcombo, BTN_STYLUS, (data[5] & 0x40));
} else {
wacom_report_key(wcombo, wacom->tool[0], 0);
wacom_report_abs(wcombo, ABS_MISC, 0); /* report tool id */
wacom_report_abs(wcombo, ABS_PRESSURE, -1);
wacom_report_key(wcombo, BTN_TOUCH, 0);
}
break;
case 2:
wacom_report_key(wcombo, BTN_TOOL_PEN, 1);
wacom_report_abs(wcombo, ABS_MISC, STYLUS_DEVICE_ID); /* report tool id */
wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1]));
wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3]));
wacom_report_abs(wcombo, ABS_PRESSURE, (signed char)data[6] + 127);
wacom_report_key(wcombo, BTN_TOUCH, ((signed char)data[6] > -80) && !(data[5] & 0x20));
wacom_report_key(wcombo, BTN_STYLUS, (data[5] & 0x40));
break;
default:
printk(KERN_INFO "wacom_penpartner_irq: received unknown report #%d\n", data[0]);
return 0;
}
return 1;
}
static int wacom_pl_irq(struct wacom_wac *wacom, void *wcombo)
{
unsigned char *data = wacom->data;
int prox, id, pressure;
if (data[0] != 2) {
dbg("wacom_pl_irq: received unknown report #%d", data[0]);
return 0;
}
prox = data[1] & 0x40;
id = ERASER_DEVICE_ID;
if (prox) {
pressure = (signed char)((data[7] << 1) | ((data[4] >> 2) & 1));
if (wacom->features->pressure_max > 255)
pressure = (pressure << 1) | ((data[4] >> 6) & 1);
pressure += (wacom->features->pressure_max + 1) / 2;
/*
* if going from out of proximity into proximity select between the eraser
* and the pen based on the state of the stylus2 button, choose eraser if
* pressed else choose pen. if not a proximity change from out to in, send
* an out of proximity for previous tool then a in for new tool.
*/
if (!wacom->tool[0]) {
/* Eraser bit set for DTF */
if (data[1] & 0x10)
wacom->tool[1] = BTN_TOOL_RUBBER;
else
/* Going into proximity select tool */
wacom->tool[1] = (data[4] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
} else {
/* was entered with stylus2 pressed */
if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[4] & 0x20)) {
/* report out proximity for previous tool */
wacom_report_key(wcombo, wacom->tool[1], 0);
wacom_input_sync(wcombo);
wacom->tool[1] = BTN_TOOL_PEN;
return 0;
}
}
if (wacom->tool[1] != BTN_TOOL_RUBBER) {
/* Unknown tool selected default to pen tool */
wacom->tool[1] = BTN_TOOL_PEN;
id = STYLUS_DEVICE_ID;
}
wacom_report_key(wcombo, wacom->tool[1], prox); /* report in proximity for tool */
wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */
wacom_report_abs(wcombo, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14));
wacom_report_abs(wcombo, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14));
wacom_report_abs(wcombo, ABS_PRESSURE, pressure);
wacom_report_key(wcombo, BTN_TOUCH, data[4] & 0x08);
wacom_report_key(wcombo, BTN_STYLUS, data[4] & 0x10);
/* Only allow the stylus2 button to be reported for the pen tool. */
wacom_report_key(wcombo, BTN_STYLUS2, (wacom->tool[1] == BTN_TOOL_PEN) && (data[4] & 0x20));
} else {
/* report proximity-out of a (valid) tool */
if (wacom->tool[1] != BTN_TOOL_RUBBER) {
/* Unknown tool selected default to pen tool */
wacom->tool[1] = BTN_TOOL_PEN;
}
wacom_report_key(wcombo, wacom->tool[1], prox);
}
wacom->tool[0] = prox; /* Save proximity state */
return 1;
}
static int wacom_ptu_irq(struct wacom_wac *wacom, void *wcombo)
{
unsigned char *data = wacom->data;
int id;
if (data[0] != 2) {
printk(KERN_INFO "wacom_ptu_irq: received unknown report #%d\n", data[0]);
return 0;
}
if (data[1] & 0x04) {
wacom_report_key(wcombo, BTN_TOOL_RUBBER, data[1] & 0x20);
wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x08);
id = ERASER_DEVICE_ID;
} else {
wacom_report_key(wcombo, BTN_TOOL_PEN, data[1] & 0x20);
wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x01);
id = STYLUS_DEVICE_ID;
}
wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */
wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
wacom_report_abs(wcombo, ABS_PRESSURE, wacom_le16_to_cpu(&data[6]));
wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10);
return 1;
}
static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
{
unsigned char *data = wacom->data;
int x, y, id, rw;
if (data[0] != 2) {
dbg("wacom_graphire_irq: received unknown report #%d", data[0]);
return 0;
}
id = STYLUS_DEVICE_ID;
if (data[1] & 0x10) { /* in prox */
switch ((data[1] >> 5) & 3) {
case 0: /* Pen */
wacom->tool[0] = BTN_TOOL_PEN;
break;
case 1: /* Rubber */
wacom->tool[0] = BTN_TOOL_RUBBER;
id = ERASER_DEVICE_ID;
break;
case 2: /* Mouse with wheel */
wacom_report_key(wcombo, BTN_MIDDLE, data[1] & 0x04);
if (wacom->features->type == WACOM_G4) {
rw = data[7] & 0x04 ? (data[7] & 0x03)-4 : (data[7] & 0x03);
wacom_report_rel(wcombo, REL_WHEEL, -rw);
} else
wacom_report_rel(wcombo, REL_WHEEL, -(signed char) data[6]);
/* fall through */
case 3: /* Mouse without wheel */
wacom->tool[0] = BTN_TOOL_MOUSE;
id = CURSOR_DEVICE_ID;
wacom_report_key(wcombo, BTN_LEFT, data[1] & 0x01);
wacom_report_key(wcombo, BTN_RIGHT, data[1] & 0x02);
if (wacom->features->type == WACOM_G4)
wacom_report_abs(wcombo, ABS_DISTANCE, data[6]);
else
wacom_report_abs(wcombo, ABS_DISTANCE, data[7]);
break;
}
}
if (data[1] & 0x90) {
x = wacom_le16_to_cpu(&data[2]);
y = wacom_le16_to_cpu(&data[4]);
wacom_report_abs(wcombo, ABS_X, x);
wacom_report_abs(wcombo, ABS_Y, y);
if (wacom->tool[0] != BTN_TOOL_MOUSE) {
wacom_report_abs(wcombo, ABS_PRESSURE, data[6] | ((data[7] & 0x01) << 8));
wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x01);
wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x04);
}
}
if (data[1] & 0x10)
wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */
else
wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */
wacom_report_key(wcombo, wacom->tool[0], data[1] & 0x10);
wacom_input_sync(wcombo);
/* send pad data */
if (wacom->features->type == WACOM_G4) {
if ( (wacom->serial[1] & 0xc0) != (data[7] & 0xf8) ) {
wacom->id[1] = 1;
wacom->serial[1] = (data[7] & 0xf8);
wacom_report_key(wcombo, BTN_0, (data[7] & 0x40));
wacom_report_key(wcombo, BTN_4, (data[7] & 0x80));
rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3);
wacom_report_rel(wcombo, REL_WHEEL, rw);
wacom_report_key(wcombo, BTN_TOOL_FINGER, 0xf0);
wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
} else if (wacom->id[1]) {
wacom->id[1] = 0;
wacom_report_key(wcombo, BTN_TOOL_FINGER, 0);
wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
}
}
return 1;
}
static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo)
{
unsigned char *data = wacom->data;
int idx;
/* tool number */
idx = data[1] & 0x01;
/* Enter report */
if ((data[1] & 0xfc) == 0xc0) {
/* serial number of the tool */
wacom->serial[idx] = ((data[3] & 0x0f) << 28) +
(data[4] << 20) + (data[5] << 12) +
(data[6] << 4) + (data[7] >> 4);
wacom->id[idx] = (data[2] << 4) | (data[3] >> 4);
switch (wacom->id[idx]) {
case 0x812: /* Inking pen */
case 0x801: /* Intuos3 Inking pen */
case 0x012:
wacom->tool[idx] = BTN_TOOL_PENCIL;
break;
case 0x822: /* Pen */
case 0x842:
case 0x852:
case 0x823: /* Intuos3 Grip Pen */
case 0x813: /* Intuos3 Classic Pen */
case 0x885: /* Intuos3 Marker Pen */
case 0x022:
wacom->tool[idx] = BTN_TOOL_PEN;
break;
case 0x832: /* Stroke pen */
case 0x032:
wacom->tool[idx] = BTN_TOOL_BRUSH;
break;
case 0x007: /* Mouse 4D and 2D */
case 0x09c:
case 0x094:
case 0x017: /* Intuos3 2D Mouse */
wacom->tool[idx] = BTN_TOOL_MOUSE;
break;
case 0x096: /* Lens cursor */
case 0x097: /* Intuos3 Lens cursor */
wacom->tool[idx] = BTN_TOOL_LENS;
break;
case 0x82a: /* Eraser */
case 0x85a:
case 0x91a:
case 0xd1a:
case 0x0fa:
case 0x82b: /* Intuos3 Grip Pen Eraser */
case 0x81b: /* Intuos3 Classic Pen Eraser */
case 0x91b: /* Intuos3 Airbrush Eraser */
wacom->tool[idx] = BTN_TOOL_RUBBER;
break;
case 0xd12:
case 0x912:
case 0x112:
case 0x913: /* Intuos3 Airbrush */
wacom->tool[idx] = BTN_TOOL_AIRBRUSH;
break;
default: /* Unknown tool */
wacom->tool[idx] = BTN_TOOL_PEN;
}
/* only large I3 support Lens Cursor */
if(!((wacom->tool[idx] == BTN_TOOL_LENS) &&
(wacom->features->type == INTUOS3))) {
wacom_report_abs(wcombo, ABS_MISC, wacom->id[idx]); /* report tool id */
wacom_report_key(wcombo, wacom->tool[idx], 1);
wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
return 2;
}
return 1;
}
/* Exit report */
if ((data[1] & 0xfe) == 0x80) {
wacom_report_key(wcombo, wacom->tool[idx], 0);
wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */
wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
return 2;
}
return 0;
}
static void wacom_intuos_general(struct wacom_wac *wacom, void *wcombo)
{
unsigned char *data = wacom->data;
unsigned int t;
/* general pen packet */
if ((data[1] & 0xb8) == 0xa0) {
t = (data[6] << 2) | ((data[7] >> 6) & 3);
wacom_report_abs(wcombo, ABS_PRESSURE, t);
wacom_report_abs(wcombo, ABS_TILT_X,
((data[7] << 1) & 0x7e) | (data[8] >> 7));
wacom_report_abs(wcombo, ABS_TILT_Y, data[8] & 0x7f);
wacom_report_key(wcombo, BTN_STYLUS, data[1] & 2);
wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 4);
wacom_report_key(wcombo, BTN_TOUCH, t > 10);
}
/* airbrush second packet */
if ((data[1] & 0xbc) == 0xb4) {
wacom_report_abs(wcombo, ABS_WHEEL,
(data[6] << 2) | ((data[7] >> 6) & 3));
wacom_report_abs(wcombo, ABS_TILT_X,
((data[7] << 1) & 0x7e) | (data[8] >> 7));
wacom_report_abs(wcombo, ABS_TILT_Y, data[8] & 0x7f);
}
return;
}
static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
{
unsigned char *data = wacom->data;
unsigned int t;
int idx, result;
if (data[0] != 2 && data[0] != 5 && data[0] != 6 && data[0] != 12) {
dbg("wacom_intuos_irq: received unknown report #%d", data[0]);
return 0;
}
/* tool number */
idx = data[1] & 0x01;
/* pad packets. Works as a second tool and is always in prox */
if (data[0] == 12) {
/* initiate the pad as a device */
if (wacom->tool[1] != BTN_TOOL_FINGER)
wacom->tool[1] = BTN_TOOL_FINGER;
wacom_report_key(wcombo, BTN_0, (data[5] & 0x01));
wacom_report_key(wcombo, BTN_1, (data[5] & 0x02));
wacom_report_key(wcombo, BTN_2, (data[5] & 0x04));
wacom_report_key(wcombo, BTN_3, (data[5] & 0x08));
wacom_report_key(wcombo, BTN_4, (data[6] & 0x01));
wacom_report_key(wcombo, BTN_5, (data[6] & 0x02));
wacom_report_key(wcombo, BTN_6, (data[6] & 0x04));
wacom_report_key(wcombo, BTN_7, (data[6] & 0x08));
wacom_report_abs(wcombo, ABS_RX, ((data[1] & 0x1f) << 8) | data[2]);
wacom_report_abs(wcombo, ABS_RY, ((data[3] & 0x1f) << 8) | data[4]);
if((data[5] & 0x0f) | (data[6] & 0x0f) | (data[1] & 0x1f) | data[2])
wacom_report_key(wcombo, wacom->tool[1], 1);
else
wacom_report_key(wcombo, wacom->tool[1], 0);
wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xffffffff);
return 1;
}
/* process in/out prox events */
result = wacom_intuos_inout(wacom, wcombo);
if (result)
return result-1;
/* Cintiq doesn't send data when RDY bit isn't set */
if ((wacom->features->type == CINTIQ) && !(data[1] & 0x40))
return 0;
if (wacom->features->type >= INTUOS3) {
wacom_report_abs(wcombo, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1));
wacom_report_abs(wcombo, ABS_Y, (data[4] << 9) | (data[5] << 1) | (data[9] & 1));
wacom_report_abs(wcombo, ABS_DISTANCE, ((data[9] >> 2) & 0x3f));
} else {
wacom_report_abs(wcombo, ABS_X, wacom_be16_to_cpu(&data[2]));
wacom_report_abs(wcombo, ABS_Y, wacom_be16_to_cpu(&data[4]));
wacom_report_abs(wcombo, ABS_DISTANCE, ((data[9] >> 3) & 0x1f));
}
/* process general packets */
wacom_intuos_general(wacom, wcombo);
/* 4D mouse, 2D mouse, marker pen rotation, or Lens cursor packets */
if ((data[1] & 0xbc) == 0xa8 || (data[1] & 0xbe) == 0xb0) {
if (data[1] & 0x02) {
/* Rotation packet */
if (wacom->features->type >= INTUOS3) {
/* I3 marker pen rotation reported as wheel
* due to valuator limitation
*/
t = (data[6] << 3) | ((data[7] >> 5) & 7);
t = (data[7] & 0x20) ? ((t > 900) ? ((t-1) / 2 - 1350) :
((t-1) / 2 + 450)) : (450 - t / 2) ;
wacom_report_abs(wcombo, ABS_WHEEL, t);
} else {
/* 4D mouse rotation packet */
t = (data[6] << 3) | ((data[7] >> 5) & 7);
wacom_report_abs(wcombo, ABS_RZ, (data[7] & 0x20) ?
((t - 1) / 2) : -t / 2);
}
} else if (!(data[1] & 0x10) && wacom->features->type < INTUOS3) {
/* 4D mouse packet */
wacom_report_key(wcombo, BTN_LEFT, data[8] & 0x01);
wacom_report_key(wcombo, BTN_MIDDLE, data[8] & 0x02);
wacom_report_key(wcombo, BTN_RIGHT, data[8] & 0x04);
wacom_report_key(wcombo, BTN_SIDE, data[8] & 0x20);
wacom_report_key(wcombo, BTN_EXTRA, data[8] & 0x10);
t = (data[6] << 2) | ((data[7] >> 6) & 3);
wacom_report_abs(wcombo, ABS_THROTTLE, (data[8] & 0x08) ? -t : t);
} else if (wacom->tool[idx] == BTN_TOOL_MOUSE) {
/* 2D mouse packet */
wacom_report_key(wcombo, BTN_LEFT, data[8] & 0x04);
wacom_report_key(wcombo, BTN_MIDDLE, data[8] & 0x08);
wacom_report_key(wcombo, BTN_RIGHT, data[8] & 0x10);
wacom_report_rel(wcombo, REL_WHEEL, (data[8] & 0x01)
- ((data[8] & 0x02) >> 1));
/* I3 2D mouse side buttons */
if (wacom->features->type == INTUOS3) {
wacom_report_key(wcombo, BTN_SIDE, data[8] & 0x40);
wacom_report_key(wcombo, BTN_EXTRA, data[8] & 0x20);
}
} else if (wacom->features->type < INTUOS3) {
/* Lens cursor packets */
wacom_report_key(wcombo, BTN_LEFT, data[8] & 0x01);
wacom_report_key(wcombo, BTN_MIDDLE, data[8] & 0x02);
wacom_report_key(wcombo, BTN_RIGHT, data[8] & 0x04);
wacom_report_key(wcombo, BTN_SIDE, data[8] & 0x10);
wacom_report_key(wcombo, BTN_EXTRA, data[8] & 0x08);
}
}
wacom_report_abs(wcombo, ABS_MISC, wacom->id[idx]); /* report tool id */
wacom_report_key(wcombo, wacom->tool[idx], 1);
wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
return 1;
}
int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo)
{
switch (wacom_wac->features->type) {
case PENPARTNER:
return (wacom_penpartner_irq(wacom_wac, wcombo));
break;
case PL:
return (wacom_pl_irq(wacom_wac, wcombo));
break;
case WACOM_G4:
case GRAPHIRE:
return (wacom_graphire_irq(wacom_wac, wcombo));
break;
case PTU:
return (wacom_ptu_irq(wacom_wac, wcombo));
break;
case INTUOS:
case INTUOS3:
case INTUOS3L:
case CINTIQ:
return (wacom_intuos_irq(wacom_wac, wcombo));
break;
default:
return 0;
}
return 0;
}
void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
switch (wacom_wac->features->type) {
case WACOM_G4:
input_dev_g4(input_dev, wacom_wac);
/* fall through */
case GRAPHIRE:
input_dev_g(input_dev, wacom_wac);
break;
case INTUOS3:
case INTUOS3L:
case CINTIQ:
input_dev_i3(input_dev, wacom_wac);
/* fall through */
case INTUOS:
input_dev_i(input_dev, wacom_wac);
break;
case PL:
case PTU:
input_dev_pl(input_dev, wacom_wac);
break;
case PENPARTNER:
input_dev_pt(input_dev, wacom_wac);
break;
}
return;
}
static struct wacom_features wacom_features[] = {
{ "Wacom Penpartner", 7, 5040, 3780, 255, 32, PENPARTNER, wacom_sys_irq },
{ "Wacom Graphire", 8, 10206, 7422, 511, 32, GRAPHIRE, wacom_sys_irq },
{ "Wacom Graphire2 4x5", 8, 10206, 7422, 511, 32, GRAPHIRE, wacom_sys_irq },
{ "Wacom Graphire2 5x7", 8, 13918, 10206, 511, 32, GRAPHIRE, wacom_sys_irq },
{ "Wacom Graphire3", 8, 10208, 7424, 511, 32, GRAPHIRE, wacom_sys_irq },
{ "Wacom Graphire3 6x8", 8, 16704, 12064, 511, 32, GRAPHIRE, wacom_sys_irq },
{ "Wacom Graphire4 4x5", 8, 10208, 7424, 511, 32, WACOM_G4, wacom_sys_irq },
{ "Wacom Graphire4 6x8", 8, 16704, 12064, 511, 32, WACOM_G4, wacom_sys_irq },
{ "Wacom Volito", 8, 5104, 3712, 511, 32, GRAPHIRE, wacom_sys_irq },
{ "Wacom PenStation2", 8, 3250, 2320, 255, 32, GRAPHIRE, wacom_sys_irq },
{ "Wacom Volito2 4x5", 8, 5104, 3712, 511, 32, GRAPHIRE, wacom_sys_irq },
{ "Wacom Volito2 2x3", 8, 3248, 2320, 511, 32, GRAPHIRE, wacom_sys_irq },
{ "Wacom PenPartner2", 8, 3250, 2320, 255, 32, GRAPHIRE, wacom_sys_irq },
{ "Wacom Intuos 4x5", 10, 12700, 10600, 1023, 15, INTUOS, wacom_sys_irq},
{ "Wacom Intuos 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_sys_irq },
{ "Wacom Intuos 9x12", 10, 30480, 24060, 1023, 15, INTUOS, wacom_sys_irq },
{ "Wacom Intuos 12x12", 10, 30480, 31680, 1023, 15, INTUOS, wacom_sys_irq },
{ "Wacom Intuos 12x18", 10, 45720, 31680, 1023, 15, INTUOS, wacom_sys_irq},
{ "Wacom PL400", 8, 5408, 4056, 255, 32, PL, wacom_sys_irq },
{ "Wacom PL500", 8, 6144, 4608, 255, 32, PL, wacom_sys_irq },
{ "Wacom PL600", 8, 6126, 4604, 255, 32, PL, wacom_sys_irq },
{ "Wacom PL600SX", 8, 6260, 5016, 255, 32, PL, wacom_sys_irq },
{ "Wacom PL550", 8, 6144, 4608, 511, 32, PL, wacom_sys_irq },
{ "Wacom PL800", 8, 7220, 5780, 511, 32, PL, wacom_sys_irq },
{ "Wacom PL700", 8, 6758, 5406, 511, 32, PL, wacom_sys_irq },
{ "Wacom PL510", 8, 6282, 4762, 511, 32, PL, wacom_sys_irq },
{ "Wacom DTU710", 8, 34080, 27660, 511, 32, PL, wacom_sys_irq },
{ "Wacom DTF521", 8, 6282, 4762, 511, 32, PL, wacom_sys_irq },
{ "Wacom DTF720", 8, 6858, 5506, 511, 32, PL, wacom_sys_irq },
{ "Wacom Cintiq Partner",8, 20480, 15360, 511, 32, PTU, wacom_sys_irq },
{ "Wacom Intuos2 4x5", 10, 12700, 10600, 1023, 15, INTUOS, wacom_sys_irq },
{ "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_sys_irq },
{ "Wacom Intuos2 9x12", 10, 30480, 24060, 1023, 15, INTUOS, wacom_sys_irq },
{ "Wacom Intuos2 12x12", 10, 30480, 31680, 1023, 15, INTUOS, wacom_sys_irq },
{ "Wacom Intuos2 12x18", 10, 45720, 31680, 1023, 15, INTUOS, wacom_sys_irq },
{ "Wacom Intuos3 4x5", 10, 25400, 20320, 1023, 15, INTUOS3, wacom_sys_irq },
{ "Wacom Intuos3 6x8", 10, 40640, 30480, 1023, 15, INTUOS3, wacom_sys_irq },
{ "Wacom Intuos3 9x12", 10, 60960, 45720, 1023, 15, INTUOS3, wacom_sys_irq },
{ "Wacom Intuos3 12x12", 10, 60960, 60960, 1023, 15, INTUOS3L, wacom_sys_irq },
{ "Wacom Intuos3 12x19", 10, 97536, 60960, 1023, 15, INTUOS3L, wacom_sys_irq },
{ "Wacom Intuos3 6x11", 10, 54204, 31750, 1023, 15, INTUOS3, wacom_sys_irq },
{ "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 15, CINTIQ, wacom_sys_irq },
{ "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_sys_irq },
{ }
};
static struct usb_device_id wacom_ids[] = {
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x00) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x10) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x11) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x12) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x13) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x14) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x15) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x63) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x64) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x20) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x21) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x22) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x23) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x24) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x30) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x31) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x32) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x33) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x34) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x35) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x37) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x38) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x39) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC4) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x41) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x42) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x43) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x44) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x45) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB0) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB1) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB2) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB3) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB4) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB5) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) },
{ }
};
const struct usb_device_id * get_device_table(void) {
const struct usb_device_id * id_table = wacom_ids;
return id_table;
}
struct wacom_features * get_wacom_feature(const struct usb_device_id * id) {
int index = id - wacom_ids;
struct wacom_features *wf = &wacom_features[index];
return wf;
}
MODULE_DEVICE_TABLE(usb, wacom_ids);
Reference in New Issue View Git Blame Copy Permalink