android_kernel_xiaomi_sm8350/include/asm-x86/smp.h
Jeremy Fitzhardinge 7c33b1e6ee x86_64: unstatic get_local_pda
This allows Xen's xen_cpu_up() to allocate a pda for the new CPU.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-16 10:55:07 +02:00

209 lines
4.8 KiB
C

#ifndef _ASM_X86_SMP_H_
#define _ASM_X86_SMP_H_
#ifndef __ASSEMBLY__
#include <linux/cpumask.h>
#include <linux/init.h>
#include <asm/percpu.h>
/*
* We need the APIC definitions automatically as part of 'smp.h'
*/
#ifdef CONFIG_X86_LOCAL_APIC
# include <asm/mpspec.h>
# include <asm/apic.h>
# ifdef CONFIG_X86_IO_APIC
# include <asm/io_apic.h>
# endif
#endif
#include <asm/pda.h>
#include <asm/thread_info.h>
extern cpumask_t cpu_callout_map;
extern cpumask_t cpu_initialized;
extern cpumask_t cpu_callin_map;
extern void (*mtrr_hook)(void);
extern void zap_low_mappings(void);
extern int __cpuinit get_local_pda(int cpu);
extern int smp_num_siblings;
extern unsigned int num_processors;
extern cpumask_t cpu_initialized;
DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
DECLARE_PER_CPU(cpumask_t, cpu_core_map);
DECLARE_PER_CPU(u16, cpu_llc_id);
DECLARE_EARLY_PER_CPU(u16, x86_cpu_to_apicid);
DECLARE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid);
/* Static state in head.S used to set up a CPU */
extern struct {
void *sp;
unsigned short ss;
} stack_start;
struct smp_ops {
void (*smp_prepare_boot_cpu)(void);
void (*smp_prepare_cpus)(unsigned max_cpus);
int (*cpu_up)(unsigned cpu);
void (*smp_cpus_done)(unsigned max_cpus);
void (*smp_send_stop)(void);
void (*smp_send_reschedule)(int cpu);
void (*send_call_func_ipi)(cpumask_t mask);
void (*send_call_func_single_ipi)(int cpu);
};
/* Globals due to paravirt */
extern void set_cpu_sibling_map(int cpu);
#ifdef CONFIG_SMP
#ifndef CONFIG_PARAVIRT
#define startup_ipi_hook(phys_apicid, start_eip, start_esp) do { } while (0)
#endif
extern struct smp_ops smp_ops;
static inline void smp_send_stop(void)
{
smp_ops.smp_send_stop();
}
static inline void smp_prepare_boot_cpu(void)
{
smp_ops.smp_prepare_boot_cpu();
}
static inline void smp_prepare_cpus(unsigned int max_cpus)
{
smp_ops.smp_prepare_cpus(max_cpus);
}
static inline void smp_cpus_done(unsigned int max_cpus)
{
smp_ops.smp_cpus_done(max_cpus);
}
static inline int __cpu_up(unsigned int cpu)
{
return smp_ops.cpu_up(cpu);
}
static inline void smp_send_reschedule(int cpu)
{
smp_ops.smp_send_reschedule(cpu);
}
static inline void arch_send_call_function_single_ipi(int cpu)
{
smp_ops.send_call_func_single_ipi(cpu);
}
static inline void arch_send_call_function_ipi(cpumask_t mask)
{
smp_ops.send_call_func_ipi(mask);
}
void native_smp_prepare_boot_cpu(void);
void native_smp_prepare_cpus(unsigned int max_cpus);
void native_smp_cpus_done(unsigned int max_cpus);
int native_cpu_up(unsigned int cpunum);
void native_send_call_func_ipi(cpumask_t mask);
void native_send_call_func_single_ipi(int cpu);
extern int __cpu_disable(void);
extern void __cpu_die(unsigned int cpu);
void smp_store_cpu_info(int id);
#define cpu_physical_id(cpu) per_cpu(x86_cpu_to_apicid, cpu)
/* We don't mark CPUs online until __cpu_up(), so we need another measure */
static inline int num_booting_cpus(void)
{
return cpus_weight(cpu_callout_map);
}
#endif /* CONFIG_SMP */
#if defined(CONFIG_SMP) && defined(CONFIG_HOTPLUG_CPU)
extern void prefill_possible_map(void);
#else
static inline void prefill_possible_map(void)
{
}
#endif
extern unsigned disabled_cpus __cpuinitdata;
#ifdef CONFIG_X86_32_SMP
/*
* This function is needed by all SMP systems. It must _always_ be valid
* from the initial startup. We map APIC_BASE very early in page_setup(),
* so this is correct in the x86 case.
*/
DECLARE_PER_CPU(int, cpu_number);
#define raw_smp_processor_id() (x86_read_percpu(cpu_number))
extern int safe_smp_processor_id(void);
#elif defined(CONFIG_X86_64_SMP)
#define raw_smp_processor_id() read_pda(cpunumber)
#define stack_smp_processor_id() \
({ \
struct thread_info *ti; \
__asm__("andq %%rsp,%0; ":"=r" (ti) : "0" (CURRENT_MASK)); \
ti->cpu; \
})
#define safe_smp_processor_id() smp_processor_id()
#else /* !CONFIG_X86_32_SMP && !CONFIG_X86_64_SMP */
#define cpu_physical_id(cpu) boot_cpu_physical_apicid
#define safe_smp_processor_id() 0
#define stack_smp_processor_id() 0
#endif
#ifdef CONFIG_X86_LOCAL_APIC
static inline int logical_smp_processor_id(void)
{
/* we don't want to mark this access volatile - bad code generation */
return GET_APIC_LOGICAL_ID(*(u32 *)(APIC_BASE + APIC_LDR));
}
#ifndef CONFIG_X86_64
static inline unsigned int read_apic_id(void)
{
return *(u32 *)(APIC_BASE + APIC_ID);
}
#else
extern unsigned int read_apic_id(void);
#endif
# ifdef APIC_DEFINITION
extern int hard_smp_processor_id(void);
# else
# include <mach_apicdef.h>
static inline int hard_smp_processor_id(void)
{
/* we don't want to mark this access volatile - bad code generation */
return GET_APIC_ID(read_apic_id());
}
# endif /* APIC_DEFINITION */
#else /* CONFIG_X86_LOCAL_APIC */
# ifndef CONFIG_SMP
# define hard_smp_processor_id() 0
# endif
#endif /* CONFIG_X86_LOCAL_APIC */
#ifdef CONFIG_HOTPLUG_CPU
extern void cpu_uninit(void);
#endif
#endif /* __ASSEMBLY__ */
#endif