android_kernel_xiaomi_sm8350/drivers/isdn/hisax/bkm_a4t.c
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

345 lines
8.8 KiB
C

/* $Id: bkm_a4t.c,v 1.22.2.4 2004/01/14 16:04:48 keil Exp $
*
* low level stuff for T-Berkom A4T
*
* Author Roland Klabunde
* Copyright by Roland Klabunde <R.Klabunde@Berkom.de>
*
* This software may be used and distributed according to the terms
* of the GNU General Public License, incorporated herein by reference.
*
*/
#include <linux/config.h>
#include <linux/init.h>
#include "hisax.h"
#include "isac.h"
#include "hscx.h"
#include "jade.h"
#include "isdnl1.h"
#include <linux/pci.h>
#include "bkm_ax.h"
extern const char *CardType[];
const char *bkm_a4t_revision = "$Revision: 1.22.2.4 $";
static inline u_char
readreg(unsigned int ale, unsigned long adr, u_char off)
{
register u_int ret;
unsigned int *po = (unsigned int *) adr; /* Postoffice */
*po = (GCS_2 | PO_WRITE | off);
__WAITI20__(po);
*po = (ale | PO_READ);
__WAITI20__(po);
ret = *po;
return ((unsigned char) ret);
}
static inline void
readfifo(unsigned int ale, unsigned long adr, u_char off, u_char * data, int size)
{
int i;
for (i = 0; i < size; i++)
*data++ = readreg(ale, adr, off);
}
static inline void
writereg(unsigned int ale, unsigned long adr, u_char off, u_char data)
{
unsigned int *po = (unsigned int *) adr; /* Postoffice */
*po = (GCS_2 | PO_WRITE | off);
__WAITI20__(po);
*po = (ale | PO_WRITE | data);
__WAITI20__(po);
}
static inline void
writefifo(unsigned int ale, unsigned long adr, u_char off, u_char * data, int size)
{
int i;
for (i = 0; i < size; i++)
writereg(ale, adr, off, *data++);
}
/* Interface functions */
static u_char
ReadISAC(struct IsdnCardState *cs, u_char offset)
{
return (readreg(cs->hw.ax.isac_ale, cs->hw.ax.isac_adr, offset));
}
static void
WriteISAC(struct IsdnCardState *cs, u_char offset, u_char value)
{
writereg(cs->hw.ax.isac_ale, cs->hw.ax.isac_adr, offset, value);
}
static void
ReadISACfifo(struct IsdnCardState *cs, u_char * data, int size)
{
readfifo(cs->hw.ax.isac_ale, cs->hw.ax.isac_adr, 0, data, size);
}
static void
WriteISACfifo(struct IsdnCardState *cs, u_char * data, int size)
{
writefifo(cs->hw.ax.isac_ale, cs->hw.ax.isac_adr, 0, data, size);
}
static u_char
ReadJADE(struct IsdnCardState *cs, int jade, u_char offset)
{
return (readreg(cs->hw.ax.jade_ale, cs->hw.ax.jade_adr, offset + (jade == -1 ? 0 : (jade ? 0xC0 : 0x80))));
}
static void
WriteJADE(struct IsdnCardState *cs, int jade, u_char offset, u_char value)
{
writereg(cs->hw.ax.jade_ale, cs->hw.ax.jade_adr, offset + (jade == -1 ? 0 : (jade ? 0xC0 : 0x80)), value);
}
/*
* fast interrupt JADE stuff goes here
*/
#define READJADE(cs, nr, reg) readreg(cs->hw.ax.jade_ale,\
cs->hw.ax.jade_adr, reg + (nr == -1 ? 0 : (nr ? 0xC0 : 0x80)))
#define WRITEJADE(cs, nr, reg, data) writereg(cs->hw.ax.jade_ale,\
cs->hw.ax.jade_adr, reg + (nr == -1 ? 0 : (nr ? 0xC0 : 0x80)), data)
#define READJADEFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.ax.jade_ale,\
cs->hw.ax.jade_adr, (nr == -1 ? 0 : (nr ? 0xC0 : 0x80)), ptr, cnt)
#define WRITEJADEFIFO(cs, nr, ptr, cnt) writefifo( cs->hw.ax.jade_ale,\
cs->hw.ax.jade_adr, (nr == -1 ? 0 : (nr ? 0xC0 : 0x80)), ptr, cnt)
#include "jade_irq.c"
static irqreturn_t
bkm_interrupt(int intno, void *dev_id, struct pt_regs *regs)
{
struct IsdnCardState *cs = dev_id;
u_char val = 0;
u_long flags;
I20_REGISTER_FILE *pI20_Regs;
spin_lock_irqsave(&cs->lock, flags);
pI20_Regs = (I20_REGISTER_FILE *) (cs->hw.ax.base);
/* ISDN interrupt pending? */
if (pI20_Regs->i20IntStatus & intISDN) {
/* Reset the ISDN interrupt */
pI20_Regs->i20IntStatus = intISDN;
/* Disable ISDN interrupt */
pI20_Regs->i20IntCtrl &= ~intISDN;
/* Channel A first */
val = readreg(cs->hw.ax.jade_ale, cs->hw.ax.jade_adr, jade_HDLC_ISR + 0x80);
if (val) {
jade_int_main(cs, val, 0);
}
/* Channel B */
val = readreg(cs->hw.ax.jade_ale, cs->hw.ax.jade_adr, jade_HDLC_ISR + 0xC0);
if (val) {
jade_int_main(cs, val, 1);
}
/* D-Channel */
val = readreg(cs->hw.ax.isac_ale, cs->hw.ax.isac_adr, ISAC_ISTA);
if (val) {
isac_interrupt(cs, val);
}
/* Reenable ISDN interrupt */
pI20_Regs->i20IntCtrl |= intISDN;
spin_unlock_irqrestore(&cs->lock, flags);
return IRQ_HANDLED;
} else {
spin_unlock_irqrestore(&cs->lock, flags);
return IRQ_NONE;
}
}
void
release_io_bkm(struct IsdnCardState *cs)
{
if (cs->hw.ax.base) {
iounmap((void *) cs->hw.ax.base);
cs->hw.ax.base = 0;
}
}
static void
enable_bkm_int(struct IsdnCardState *cs, unsigned bEnable)
{
if (cs->typ == ISDN_CTYPE_BKM_A4T) {
I20_REGISTER_FILE *pI20_Regs = (I20_REGISTER_FILE *) (cs->hw.ax.base);
if (bEnable)
pI20_Regs->i20IntCtrl |= (intISDN | intPCI);
else
/* CAUTION: This disables the video capture driver too */
pI20_Regs->i20IntCtrl &= ~(intISDN | intPCI);
}
}
static void
reset_bkm(struct IsdnCardState *cs)
{
if (cs->typ == ISDN_CTYPE_BKM_A4T) {
I20_REGISTER_FILE *pI20_Regs = (I20_REGISTER_FILE *) (cs->hw.ax.base);
/* Issue the I20 soft reset */
pI20_Regs->i20SysControl = 0xFF; /* all in */
mdelay(10);
/* Remove the soft reset */
pI20_Regs->i20SysControl = sysRESET | 0xFF;
mdelay(10);
/* Set our configuration */
pI20_Regs->i20SysControl = sysRESET | sysCFG;
/* Issue ISDN reset */
pI20_Regs->i20GuestControl = guestWAIT_CFG |
g_A4T_JADE_RES |
g_A4T_ISAR_RES |
g_A4T_ISAC_RES |
g_A4T_JADE_BOOTR |
g_A4T_ISAR_BOOTR;
mdelay(10);
/* Remove RESET state from ISDN */
pI20_Regs->i20GuestControl &= ~(g_A4T_ISAC_RES |
g_A4T_JADE_RES |
g_A4T_ISAR_RES);
mdelay(10);
}
}
static int
BKM_card_msg(struct IsdnCardState *cs, int mt, void *arg)
{
u_long flags;
switch (mt) {
case CARD_RESET:
/* Disable ints */
spin_lock_irqsave(&cs->lock, flags);
enable_bkm_int(cs, 0);
reset_bkm(cs);
spin_unlock_irqrestore(&cs->lock, flags);
return (0);
case CARD_RELEASE:
/* Sanity */
spin_lock_irqsave(&cs->lock, flags);
enable_bkm_int(cs, 0);
reset_bkm(cs);
spin_unlock_irqrestore(&cs->lock, flags);
release_io_bkm(cs);
return (0);
case CARD_INIT:
spin_lock_irqsave(&cs->lock, flags);
clear_pending_isac_ints(cs);
clear_pending_jade_ints(cs);
initisac(cs);
initjade(cs);
/* Enable ints */
enable_bkm_int(cs, 1);
spin_unlock_irqrestore(&cs->lock, flags);
return (0);
case CARD_TEST:
return (0);
}
return (0);
}
static struct pci_dev *dev_a4t __initdata = NULL;
int __init
setup_bkm_a4t(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
char tmp[64];
u_int pci_memaddr = 0, found = 0;
I20_REGISTER_FILE *pI20_Regs;
#ifdef CONFIG_PCI
#endif
strcpy(tmp, bkm_a4t_revision);
printk(KERN_INFO "HiSax: T-Berkom driver Rev. %s\n", HiSax_getrev(tmp));
if (cs->typ == ISDN_CTYPE_BKM_A4T) {
cs->subtyp = BKM_A4T;
} else
return (0);
#ifdef CONFIG_PCI
while ((dev_a4t = pci_find_device(PCI_VENDOR_ID_ZORAN,
PCI_DEVICE_ID_ZORAN_36120, dev_a4t))) {
u16 sub_sys;
u16 sub_vendor;
sub_vendor = dev_a4t->subsystem_vendor;
sub_sys = dev_a4t->subsystem_device;
if ((sub_sys == PCI_DEVICE_ID_BERKOM_A4T) && (sub_vendor == PCI_VENDOR_ID_BERKOM)) {
if (pci_enable_device(dev_a4t))
return(0);
found = 1;
pci_memaddr = pci_resource_start(dev_a4t, 0);
cs->irq = dev_a4t->irq;
break;
}
}
if (!found) {
printk(KERN_WARNING "HiSax: %s: Card not found\n", CardType[card->typ]);
return (0);
}
if (!cs->irq) { /* IRQ range check ?? */
printk(KERN_WARNING "HiSax: %s: No IRQ\n", CardType[card->typ]);
return (0);
}
if (!pci_memaddr) {
printk(KERN_WARNING "HiSax: %s: No Memory base address\n", CardType[card->typ]);
return (0);
}
cs->hw.ax.base = (long) ioremap(pci_memaddr, 4096);
/* Check suspecious address */
pI20_Regs = (I20_REGISTER_FILE *) (cs->hw.ax.base);
if ((pI20_Regs->i20IntStatus & 0x8EFFFFFF) != 0) {
printk(KERN_WARNING "HiSax: %s address %lx-%lx suspecious\n",
CardType[card->typ], cs->hw.ax.base, cs->hw.ax.base + 4096);
iounmap((void *) cs->hw.ax.base);
cs->hw.ax.base = 0;
return (0);
}
cs->hw.ax.isac_adr = cs->hw.ax.base + PO_OFFSET;
cs->hw.ax.jade_adr = cs->hw.ax.base + PO_OFFSET;
cs->hw.ax.isac_ale = GCS_1;
cs->hw.ax.jade_ale = GCS_3;
#else
printk(KERN_WARNING "HiSax: %s: NO_PCI_BIOS\n", CardType[card->typ]);
printk(KERN_WARNING "HiSax: %s: unable to configure\n", CardType[card->typ]);
return (0);
#endif /* CONFIG_PCI */
printk(KERN_INFO "HiSax: %s: Card configured at 0x%lX IRQ %d\n",
CardType[card->typ], cs->hw.ax.base, cs->irq);
setup_isac(cs);
cs->readisac = &ReadISAC;
cs->writeisac = &WriteISAC;
cs->readisacfifo = &ReadISACfifo;
cs->writeisacfifo = &WriteISACfifo;
cs->BC_Read_Reg = &ReadJADE;
cs->BC_Write_Reg = &WriteJADE;
cs->BC_Send_Data = &jade_fill_fifo;
cs->cardmsg = &BKM_card_msg;
cs->irq_func = &bkm_interrupt;
cs->irq_flags |= SA_SHIRQ;
ISACVersion(cs, "Telekom A4T:");
/* Jade version */
JadeVersion(cs, "Telekom A4T:");
return (1);
}