android_kernel_xiaomi_sm8350/arch/powerpc/kernel/setup_32.c
Benjamin Herrenschmidt 0ebfff1491 [POWERPC] Add new interrupt mapping core and change platforms to use it
This adds the new irq remapper core and removes the old one.  Because
there are some fundamental conflicts with the old code, like the value
of NO_IRQ which I'm now setting to 0 (as per discussions with Linus),
etc..., this commit also changes the relevant platform and driver code
over to use the new remapper (so as not to cause difficulties later
in bisecting).

This patch removes the old pre-parsing of the open firmware interrupt
tree along with all the bogus assumptions it made to try to renumber
interrupts according to the platform. This is all to be handled by the
new code now.

For the pSeries XICS interrupt controller, a single remapper host is
created for the whole machine regardless of how many interrupt
presentation and source controllers are found, and it's set to match
any device node that isn't a 8259.  That works fine on pSeries and
avoids having to deal with some of the complexities of split source
controllers vs. presentation controllers in the pSeries device trees.

The powerpc i8259 PIC driver now always requests the legacy interrupt
range. It also has the feature of being able to match any device node
(including NULL) if passed no device node as an input. That will help
porting over platforms with broken device-trees like Pegasos who don't
have a proper interrupt tree.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 21:36:01 +10:00

303 lines
6.7 KiB
C

/*
* Common prep/pmac/chrp boot and setup code.
*/
#include <linux/module.h>
#include <linux/string.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/reboot.h>
#include <linux/delay.h>
#include <linux/initrd.h>
#include <linux/ide.h>
#include <linux/tty.h>
#include <linux/bootmem.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/cpu.h>
#include <linux/console.h>
#include <asm/residual.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/processor.h>
#include <asm/pgtable.h>
#include <asm/setup.h>
#include <asm/amigappc.h>
#include <asm/smp.h>
#include <asm/elf.h>
#include <asm/cputable.h>
#include <asm/bootx.h>
#include <asm/btext.h>
#include <asm/machdep.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/pmac_feature.h>
#include <asm/sections.h>
#include <asm/nvram.h>
#include <asm/xmon.h>
#include <asm/time.h>
#include <asm/serial.h>
#include <asm/udbg.h>
#include "setup.h"
#define DBG(fmt...)
#if defined CONFIG_KGDB
#include <asm/kgdb.h>
#endif
extern void bootx_init(unsigned long r4, unsigned long phys);
struct ide_machdep_calls ppc_ide_md;
int boot_cpuid;
EXPORT_SYMBOL_GPL(boot_cpuid);
int boot_cpuid_phys;
unsigned long ISA_DMA_THRESHOLD;
unsigned int DMA_MODE_READ;
unsigned int DMA_MODE_WRITE;
int have_of = 1;
#ifdef CONFIG_PPC_MULTIPLATFORM
dev_t boot_dev;
#endif /* CONFIG_PPC_MULTIPLATFORM */
#ifdef CONFIG_MAGIC_SYSRQ
unsigned long SYSRQ_KEY = 0x54;
#endif /* CONFIG_MAGIC_SYSRQ */
#ifdef CONFIG_VGA_CONSOLE
unsigned long vgacon_remap_base;
#endif
/*
* These are used in binfmt_elf.c to put aux entries on the stack
* for each elf executable being started.
*/
int dcache_bsize;
int icache_bsize;
int ucache_bsize;
/*
* We're called here very early in the boot. We determine the machine
* type and call the appropriate low-level setup functions.
* -- Cort <cort@fsmlabs.com>
*
* Note that the kernel may be running at an address which is different
* from the address that it was linked at, so we must use RELOC/PTRRELOC
* to access static data (including strings). -- paulus
*/
unsigned long __init early_init(unsigned long dt_ptr)
{
unsigned long offset = reloc_offset();
/* First zero the BSS -- use memset_io, some platforms don't have
* caches on yet */
memset_io((void __iomem *)PTRRELOC(&__bss_start), 0, _end - __bss_start);
/*
* Identify the CPU type and fix up code sections
* that depend on which cpu we have.
*/
identify_cpu(offset, 0);
do_cpu_ftr_fixups(offset);
return KERNELBASE + offset;
}
/*
* Find out what kind of machine we're on and save any data we need
* from the early boot process (devtree is copied on pmac by prom_init()).
* This is called very early on the boot process, after a minimal
* MMU environment has been set up but before MMU_init is called.
*/
void __init machine_init(unsigned long dt_ptr, unsigned long phys)
{
/* If btext is enabled, we might have a BAT setup for early display,
* thus we do enable some very basic udbg output
*/
#ifdef CONFIG_BOOTX_TEXT
udbg_putc = btext_drawchar;
#endif
/* Do some early initialization based on the flat device tree */
early_init_devtree(__va(dt_ptr));
probe_machine();
#ifdef CONFIG_6xx
if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
cpu_has_feature(CPU_FTR_CAN_NAP))
ppc_md.power_save = ppc6xx_idle;
#endif
if (ppc_md.progress)
ppc_md.progress("id mach(): done", 0x200);
}
#ifdef CONFIG_BOOKE_WDT
/* Checks wdt=x and wdt_period=xx command-line option */
int __init early_parse_wdt(char *p)
{
if (p && strncmp(p, "0", 1) != 0)
booke_wdt_enabled = 1;
return 0;
}
early_param("wdt", early_parse_wdt);
int __init early_parse_wdt_period (char *p)
{
if (p)
booke_wdt_period = simple_strtoul(p, NULL, 0);
return 0;
}
early_param("wdt_period", early_parse_wdt_period);
#endif /* CONFIG_BOOKE_WDT */
/* Checks "l2cr=xxxx" command-line option */
int __init ppc_setup_l2cr(char *str)
{
if (cpu_has_feature(CPU_FTR_L2CR)) {
unsigned long val = simple_strtoul(str, NULL, 0);
printk(KERN_INFO "l2cr set to %lx\n", val);
_set_L2CR(0); /* force invalidate by disable cache */
_set_L2CR(val); /* and enable it */
}
return 1;
}
__setup("l2cr=", ppc_setup_l2cr);
#ifdef CONFIG_GENERIC_NVRAM
/* Generic nvram hooks used by drivers/char/gen_nvram.c */
unsigned char nvram_read_byte(int addr)
{
if (ppc_md.nvram_read_val)
return ppc_md.nvram_read_val(addr);
return 0xff;
}
EXPORT_SYMBOL(nvram_read_byte);
void nvram_write_byte(unsigned char val, int addr)
{
if (ppc_md.nvram_write_val)
ppc_md.nvram_write_val(addr, val);
}
EXPORT_SYMBOL(nvram_write_byte);
void nvram_sync(void)
{
if (ppc_md.nvram_sync)
ppc_md.nvram_sync();
}
EXPORT_SYMBOL(nvram_sync);
#endif /* CONFIG_NVRAM */
static struct cpu cpu_devices[NR_CPUS];
int __init ppc_init(void)
{
int i;
/* clear the progress line */
if ( ppc_md.progress ) ppc_md.progress(" ", 0xffff);
/* register CPU devices */
for_each_possible_cpu(i)
register_cpu(&cpu_devices[i], i);
/* call platform init */
if (ppc_md.init != NULL) {
ppc_md.init();
}
return 0;
}
arch_initcall(ppc_init);
/* Warning, IO base is not yet inited */
void __init setup_arch(char **cmdline_p)
{
*cmdline_p = cmd_line;
/* so udelay does something sensible, assume <= 1000 bogomips */
loops_per_jiffy = 500000000 / HZ;
unflatten_device_tree();
check_for_initrd();
if (ppc_md.init_early)
ppc_md.init_early();
find_legacy_serial_ports();
smp_setup_cpu_maps();
#ifdef CONFIG_XMON_DEFAULT
xmon_init(1);
#endif
/* Register early console */
register_early_udbg_console();
#if defined(CONFIG_KGDB)
if (ppc_md.kgdb_map_scc)
ppc_md.kgdb_map_scc();
set_debug_traps();
if (strstr(cmd_line, "gdb")) {
if (ppc_md.progress)
ppc_md.progress("setup_arch: kgdb breakpoint", 0x4000);
printk("kgdb breakpoint activated\n");
breakpoint();
}
#endif
/*
* Set cache line size based on type of cpu as a default.
* Systems with OF can look in the properties on the cpu node(s)
* for a possibly more accurate value.
*/
if (cpu_has_feature(CPU_FTR_SPLIT_ID_CACHE)) {
dcache_bsize = cur_cpu_spec->dcache_bsize;
icache_bsize = cur_cpu_spec->icache_bsize;
ucache_bsize = 0;
} else
ucache_bsize = dcache_bsize = icache_bsize
= cur_cpu_spec->dcache_bsize;
/* reboot on panic */
panic_timeout = 180;
if (ppc_md.panic)
setup_panic();
init_mm.start_code = PAGE_OFFSET;
init_mm.end_code = (unsigned long) _etext;
init_mm.end_data = (unsigned long) _edata;
init_mm.brk = klimit;
if (do_early_xmon)
debugger(NULL);
/* set up the bootmem stuff with available memory */
do_init_bootmem();
if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab);
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
ppc_md.setup_arch();
if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
paging_init();
}