405c829f98
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
465 lines
11 KiB
C
465 lines
11 KiB
C
/*
|
|
* linux/drivers/mtd/onenand/simulator.c
|
|
*
|
|
* The OneNAND simulator
|
|
*
|
|
* Copyright(c) 2005 Samsung Electronics
|
|
* Kyungmin Park <kyungmin.park@samsung.com>
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/onenand.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/sizes.h>
|
|
|
|
#ifndef CONFIG_ONENAND_SIM_MANUFACTURER
|
|
#define CONFIG_ONENAND_SIM_MANUFACTURER 0xec
|
|
#endif
|
|
#ifndef CONFIG_ONENAND_SIM_DEVICE_ID
|
|
#define CONFIG_ONENAND_SIM_DEVICE_ID 0x04
|
|
#endif
|
|
#ifndef CONFIG_ONENAND_SIM_VERSION_ID
|
|
#define CONFIG_ONENAND_SIM_VERSION_ID 0x1e
|
|
#endif
|
|
|
|
static int manuf_id = CONFIG_ONENAND_SIM_MANUFACTURER;
|
|
static int device_id = CONFIG_ONENAND_SIM_DEVICE_ID;
|
|
static int version_id = CONFIG_ONENAND_SIM_VERSION_ID;
|
|
|
|
struct onenand_flash {
|
|
void __iomem *base;
|
|
void __iomem *data;
|
|
};
|
|
|
|
#define ONENAND_CORE(flash) (flash->data)
|
|
|
|
#define ONENAND_MAIN_AREA(this, offset) \
|
|
(this->base + ONENAND_DATARAM + offset)
|
|
|
|
#define ONENAND_SPARE_AREA(this, offset) \
|
|
(this->base + ONENAND_SPARERAM + offset)
|
|
|
|
#define ONENAND_GET_WP_STATUS(this) \
|
|
(readw(this->base + ONENAND_REG_WP_STATUS))
|
|
|
|
#define ONENAND_SET_WP_STATUS(v, this) \
|
|
(writew(v, this->base + ONENAND_REG_WP_STATUS))
|
|
|
|
/* It has all 0xff chars */
|
|
static unsigned char *ffchars;
|
|
|
|
/*
|
|
* OneNAND simulator mtd
|
|
*/
|
|
struct mtd_info *onenand_sim;
|
|
|
|
|
|
/**
|
|
* onenand_lock_handle - Handle Lock scheme
|
|
* @param this OneNAND device structure
|
|
* @param cmd The command to be sent
|
|
*
|
|
* Send lock command to OneNAND device.
|
|
* The lock scheme is depends on chip type.
|
|
*/
|
|
static void onenand_lock_handle(struct onenand_chip *this, int cmd)
|
|
{
|
|
int block_lock_scheme;
|
|
int status;
|
|
|
|
status = ONENAND_GET_WP_STATUS(this);
|
|
block_lock_scheme = !(this->options & ONENAND_CONT_LOCK);
|
|
|
|
switch (cmd) {
|
|
case ONENAND_CMD_UNLOCK:
|
|
if (block_lock_scheme)
|
|
ONENAND_SET_WP_STATUS(ONENAND_WP_US, this);
|
|
else
|
|
ONENAND_SET_WP_STATUS(status | ONENAND_WP_US, this);
|
|
break;
|
|
|
|
case ONENAND_CMD_LOCK:
|
|
if (block_lock_scheme)
|
|
ONENAND_SET_WP_STATUS(ONENAND_WP_LS, this);
|
|
else
|
|
ONENAND_SET_WP_STATUS(status | ONENAND_WP_LS, this);
|
|
break;
|
|
|
|
case ONENAND_CMD_LOCK_TIGHT:
|
|
if (block_lock_scheme)
|
|
ONENAND_SET_WP_STATUS(ONENAND_WP_LTS, this);
|
|
else
|
|
ONENAND_SET_WP_STATUS(status | ONENAND_WP_LTS, this);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* onenand_bootram_handle - Handle BootRAM area
|
|
* @param this OneNAND device structure
|
|
* @param cmd The command to be sent
|
|
*
|
|
* Emulate BootRAM area. It is possible to do basic operation using BootRAM.
|
|
*/
|
|
static void onenand_bootram_handle(struct onenand_chip *this, int cmd)
|
|
{
|
|
switch (cmd) {
|
|
case ONENAND_CMD_READID:
|
|
writew(manuf_id, this->base);
|
|
writew(device_id, this->base + 2);
|
|
writew(version_id, this->base + 4);
|
|
break;
|
|
|
|
default:
|
|
/* REVIST: Handle other commands */
|
|
break;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* onenand_update_interrupt - Set interrupt register
|
|
* @param this OneNAND device structure
|
|
* @param cmd The command to be sent
|
|
*
|
|
* Update interrupt register. The status is depends on command.
|
|
*/
|
|
static void onenand_update_interrupt(struct onenand_chip *this, int cmd)
|
|
{
|
|
int interrupt = ONENAND_INT_MASTER;
|
|
|
|
switch (cmd) {
|
|
case ONENAND_CMD_READ:
|
|
case ONENAND_CMD_READOOB:
|
|
interrupt |= ONENAND_INT_READ;
|
|
break;
|
|
|
|
case ONENAND_CMD_PROG:
|
|
case ONENAND_CMD_PROGOOB:
|
|
interrupt |= ONENAND_INT_WRITE;
|
|
break;
|
|
|
|
case ONENAND_CMD_ERASE:
|
|
interrupt |= ONENAND_INT_ERASE;
|
|
break;
|
|
|
|
case ONENAND_CMD_RESET:
|
|
interrupt |= ONENAND_INT_RESET;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
writew(interrupt, this->base + ONENAND_REG_INTERRUPT);
|
|
}
|
|
|
|
/**
|
|
* onenand_check_overwrite - Check over-write if happend
|
|
* @param dest The destination pointer
|
|
* @param src The source pointer
|
|
* @param count The length to be check
|
|
* @return 0 on same, otherwise 1
|
|
*
|
|
* Compare the source with destination
|
|
*/
|
|
static int onenand_check_overwrite(void *dest, void *src, size_t count)
|
|
{
|
|
unsigned int *s = (unsigned int *) src;
|
|
unsigned int *d = (unsigned int *) dest;
|
|
int i;
|
|
count >>= 2;
|
|
|
|
for (i = 0; i < count; i++)
|
|
if ((*s++ ^ *d++) != 0)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* onenand_data_handle - Handle OneNAND Core and DataRAM
|
|
* @param this OneNAND device structure
|
|
* @param cmd The command to be sent
|
|
* @param dataram Which dataram used
|
|
* @param offset The offset to OneNAND Core
|
|
*
|
|
* Copy data from OneNAND Core to DataRAM (read)
|
|
* Copy data from DataRAM to OneNAND Core (write)
|
|
* Erase the OneNAND Core (erase)
|
|
*/
|
|
static void onenand_data_handle(struct onenand_chip *this, int cmd,
|
|
int dataram, unsigned int offset)
|
|
{
|
|
struct onenand_flash *flash = this->priv;
|
|
int main_offset, spare_offset;
|
|
void __iomem *src;
|
|
void __iomem *dest;
|
|
|
|
if (dataram) {
|
|
main_offset = onenand_sim->oobblock;
|
|
spare_offset = onenand_sim->oobsize;
|
|
} else {
|
|
main_offset = 0;
|
|
spare_offset = 0;
|
|
}
|
|
|
|
switch (cmd) {
|
|
case ONENAND_CMD_READ:
|
|
src = ONENAND_CORE(flash) + offset;
|
|
dest = ONENAND_MAIN_AREA(this, main_offset);
|
|
memcpy(dest, src, onenand_sim->oobblock);
|
|
/* Fall through */
|
|
|
|
case ONENAND_CMD_READOOB:
|
|
src = ONENAND_CORE(flash) + this->chipsize + (offset >> 5);
|
|
dest = ONENAND_SPARE_AREA(this, spare_offset);
|
|
memcpy(dest, src, onenand_sim->oobsize);
|
|
break;
|
|
|
|
case ONENAND_CMD_PROG:
|
|
src = ONENAND_MAIN_AREA(this, main_offset);
|
|
dest = ONENAND_CORE(flash) + offset;
|
|
if (memcmp(dest, ffchars, onenand_sim->oobblock) &&
|
|
onenand_check_overwrite(dest, src, onenand_sim->oobblock))
|
|
printk(KERN_ERR "over-write happend at 0x%08x\n", offset);
|
|
memcpy(dest, src, onenand_sim->oobblock);
|
|
/* Fall through */
|
|
|
|
case ONENAND_CMD_PROGOOB:
|
|
src = ONENAND_SPARE_AREA(this, spare_offset);
|
|
/* Check all data is 0xff chars */
|
|
if (!memcmp(src, ffchars, onenand_sim->oobsize))
|
|
break;
|
|
|
|
dest = ONENAND_CORE(flash) + this->chipsize + (offset >> 5);
|
|
if (memcmp(dest, ffchars, onenand_sim->oobsize) &&
|
|
onenand_check_overwrite(dest, src, onenand_sim->oobsize))
|
|
printk(KERN_ERR "OOB: over-write happend at 0x%08x\n", offset);
|
|
memcpy(dest, src, onenand_sim->oobsize);
|
|
break;
|
|
|
|
case ONENAND_CMD_ERASE:
|
|
memset(ONENAND_CORE(flash) + offset, 0xff, (1 << this->erase_shift));
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* onenand_command_handle - Handle command
|
|
* @param this OneNAND device structure
|
|
* @param cmd The command to be sent
|
|
*
|
|
* Emulate OneNAND command.
|
|
*/
|
|
static void onenand_command_handle(struct onenand_chip *this, int cmd)
|
|
{
|
|
unsigned long offset = 0;
|
|
int block = -1, page = -1, bufferram = -1;
|
|
int dataram = 0;
|
|
|
|
switch (cmd) {
|
|
case ONENAND_CMD_UNLOCK:
|
|
case ONENAND_CMD_LOCK:
|
|
case ONENAND_CMD_LOCK_TIGHT:
|
|
onenand_lock_handle(this, cmd);
|
|
break;
|
|
|
|
case ONENAND_CMD_BUFFERRAM:
|
|
/* Do nothing */
|
|
return;
|
|
|
|
default:
|
|
block = (int) readw(this->base + ONENAND_REG_START_ADDRESS1);
|
|
if (block & (1 << ONENAND_DDP_SHIFT)) {
|
|
block &= ~(1 << ONENAND_DDP_SHIFT);
|
|
/* The half of chip block */
|
|
block += this->chipsize >> (this->erase_shift + 1);
|
|
}
|
|
if (cmd == ONENAND_CMD_ERASE)
|
|
break;
|
|
|
|
page = (int) readw(this->base + ONENAND_REG_START_ADDRESS8);
|
|
page = (page >> ONENAND_FPA_SHIFT);
|
|
bufferram = (int) readw(this->base + ONENAND_REG_START_BUFFER);
|
|
bufferram >>= ONENAND_BSA_SHIFT;
|
|
bufferram &= ONENAND_BSA_DATARAM1;
|
|
dataram = (bufferram == ONENAND_BSA_DATARAM1) ? 1 : 0;
|
|
break;
|
|
}
|
|
|
|
if (block != -1)
|
|
offset += block << this->erase_shift;
|
|
|
|
if (page != -1)
|
|
offset += page << this->page_shift;
|
|
|
|
onenand_data_handle(this, cmd, dataram, offset);
|
|
|
|
onenand_update_interrupt(this, cmd);
|
|
}
|
|
|
|
/**
|
|
* onenand_writew - [OneNAND Interface] Emulate write operation
|
|
* @param value value to write
|
|
* @param addr address to write
|
|
*
|
|
* Write OneNAND reigser with value
|
|
*/
|
|
static void onenand_writew(unsigned short value, void __iomem *addr)
|
|
{
|
|
struct onenand_chip *this = onenand_sim->priv;
|
|
|
|
/* BootRAM handling */
|
|
if (addr < this->base + ONENAND_DATARAM) {
|
|
onenand_bootram_handle(this, value);
|
|
return;
|
|
}
|
|
/* Command handling */
|
|
if (addr == this->base + ONENAND_REG_COMMAND)
|
|
onenand_command_handle(this, value);
|
|
|
|
writew(value, addr);
|
|
}
|
|
|
|
/**
|
|
* flash_init - Initialize OneNAND simulator
|
|
* @param flash OneNAND simulaotr data strucutres
|
|
*
|
|
* Initialize OneNAND simulator.
|
|
*/
|
|
static int __init flash_init(struct onenand_flash *flash)
|
|
{
|
|
int density, size;
|
|
int buffer_size;
|
|
|
|
flash->base = kmalloc(SZ_128K, GFP_KERNEL);
|
|
if (!flash->base) {
|
|
printk(KERN_ERR "Unalbe to allocate base address.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(flash->base, 0, SZ_128K);
|
|
|
|
density = device_id >> ONENAND_DEVICE_DENSITY_SHIFT;
|
|
size = ((16 << 20) << density);
|
|
|
|
ONENAND_CORE(flash) = vmalloc(size + (size >> 5));
|
|
if (!ONENAND_CORE(flash)) {
|
|
printk(KERN_ERR "Unalbe to allocate nand core address.\n");
|
|
kfree(flash->base);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(ONENAND_CORE(flash), 0xff, size + (size >> 5));
|
|
|
|
/* Setup registers */
|
|
writew(manuf_id, flash->base + ONENAND_REG_MANUFACTURER_ID);
|
|
writew(device_id, flash->base + ONENAND_REG_DEVICE_ID);
|
|
writew(version_id, flash->base + ONENAND_REG_VERSION_ID);
|
|
|
|
if (density < 2)
|
|
buffer_size = 0x0400; /* 1KB page */
|
|
else
|
|
buffer_size = 0x0800; /* 2KB page */
|
|
writew(buffer_size, flash->base + ONENAND_REG_DATA_BUFFER_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* flash_exit - Clean up OneNAND simulator
|
|
* @param flash OneNAND simulaotr data strucutres
|
|
*
|
|
* Clean up OneNAND simulator.
|
|
*/
|
|
static void flash_exit(struct onenand_flash *flash)
|
|
{
|
|
vfree(ONENAND_CORE(flash));
|
|
kfree(flash->base);
|
|
kfree(flash);
|
|
}
|
|
|
|
static int __init onenand_sim_init(void)
|
|
{
|
|
struct onenand_chip *this;
|
|
struct onenand_flash *flash;
|
|
int len;
|
|
|
|
/* Allocate all 0xff chars pointer */
|
|
ffchars = kmalloc(MAX_ONENAND_PAGESIZE, GFP_KERNEL);
|
|
if (!ffchars) {
|
|
printk(KERN_ERR "Unable to allocate ff chars.\n");
|
|
return -ENOMEM;
|
|
}
|
|
memset(ffchars, 0xff, MAX_ONENAND_PAGESIZE);
|
|
|
|
len = sizeof(struct mtd_info) + sizeof(struct onenand_chip) + sizeof (struct onenand_flash);
|
|
|
|
/* Allocate OneNAND simulator mtd pointer */
|
|
onenand_sim = kmalloc(len, GFP_KERNEL);
|
|
if (!onenand_sim) {
|
|
printk(KERN_ERR "Unable to allocate core structures.\n");
|
|
kfree(ffchars);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(onenand_sim, 0, len);
|
|
|
|
this = (struct onenand_chip *) (onenand_sim + 1);
|
|
/* Override write_word function */
|
|
this->write_word = onenand_writew;
|
|
|
|
flash = (struct onenand_flash *) (this + 1);
|
|
|
|
if (flash_init(flash)) {
|
|
printk(KERN_ERR "Unable to allocat flash.\n");
|
|
kfree(ffchars);
|
|
kfree(onenand_sim);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
this->base = flash->base;
|
|
this->priv = flash;
|
|
onenand_sim->priv = this;
|
|
|
|
if (onenand_scan(onenand_sim, 1)) {
|
|
kfree(ffchars);
|
|
kfree(onenand_sim);
|
|
flash_exit(flash);
|
|
return -ENXIO;
|
|
}
|
|
|
|
add_mtd_device(onenand_sim);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __exit onenand_sim_exit(void)
|
|
{
|
|
struct onenand_chip *this = onenand_sim->priv;
|
|
struct onenand_flash *flash = this->priv;
|
|
|
|
kfree(ffchars);
|
|
onenand_release(onenand_sim);
|
|
flash_exit(flash);
|
|
kfree(onenand_sim);
|
|
}
|
|
|
|
module_init(onenand_sim_init);
|
|
module_exit(onenand_sim_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>");
|
|
MODULE_DESCRIPTION("The OneNAND flash simulator");
|