Subrat Dash 42155f64d6 qcacld-3.0: Add support to retry gpio sync for capturing tsf ... When the chip is power save mode it misses the gpio strobe from the host platform. The TSF is not latched is not latched in this case. As a result the reported TSF in the WMI_VDEV_TSF_REPORT_EVENTID is not correct. Fix this by adding a retry mechnism when the reported TSF is not proper. Change-Id: Ica2d5c796e9d021b65e898ee3defe88d62183911		2019-11-26 11:44:50 -08:00
..
hdd_config.h	qcacld-3.0: Set 5G band capability bit in gActionOUIConnect1x1 ini	2019-11-18 02:29:15 -08:00
hdd_dp_cfg.h	qcacld-3.0: Fix CFG_RX_MODE_DEFAULT redefined error	2019-10-15 05:16:12 -07:00
qc_sap_ioctl.h	qcacld-3.0: Move sta_info from array based to hash based	2019-10-15 00:48:54 -07:00
wlan_hdd_apf.h
wlan_hdd_assoc.h	qcacld-3.0: Fix failure of NDP peer save	2019-11-15 21:00:09 -08:00
wlan_hdd_bcn_recv.h	qcacld-3.0: Handle BEACON_REPORTING_DO_NOT_RESUME vendor attribute	2019-06-18 07:51:15 -07:00
wlan_hdd_cfg.h	qcacld-3.0: Add operating frequency in hdd_config	2019-09-20 23:36:02 -07:00
wlan_hdd_conc_ut.h
wlan_hdd_data_stall_detection.h
wlan_hdd_debugfs_coex.h	qcacld-3.0: Add support to improve coex logging	2019-03-29 00:47:53 -07:00
wlan_hdd_debugfs_csr.h
wlan_hdd_debugfs_llstat.h
wlan_hdd_debugfs.h
wlan_hdd_driver_ops.h	qcacld-3.0: Enable Force wake	2019-11-26 02:13:59 -08:00
wlan_hdd_ether.h
wlan_hdd_ftm.h
wlan_hdd_fw_state.h
wlan_hdd_he.h
wlan_hdd_host_offload.h	qcacld-3.0: Replace multiple IPv4/v6 address len macros with QDF macro	2019-04-16 19:57:47 -07:00
wlan_hdd_includes.h
wlan_hdd_ipa.h	qcacld-3.0: abstract Linux identifiers from IPA component	2019-05-31 02:29:49 -07:00
wlan_hdd_lro.h
wlan_hdd_main.h	qcacld-3.0: Add support to retry gpio sync for capturing tsf	2019-11-26 11:44:50 -08:00
wlan_hdd_misc.h	qcacld-3.0: add build flag DYNAMIC_SINGLE_CHIP	2019-04-30 22:27:24 -07:00
wlan_hdd_mpta_helper.h	qcacld-3.0: Add MPTA helper support	2019-03-15 07:46:59 -07:00
wlan_hdd_nan.h	qcacld-3.0: Remove unused wlan_hdd_cfg80211_nan_*() stubs	2019-03-07 22:22:42 -08:00
wlan_hdd_napi.h
wlan_hdd_oemdata.h	qcacld-3.0: Convert legacy chan ID usage to chan freq	2019-11-12 02:35:14 -08:00
wlan_hdd_p2p.h	qcacld-3.0: Process rx_mgmt_pkt based on frequency	2019-10-18 02:55:17 -07:00
wlan_hdd_packet_filter_api.h
wlan_hdd_packet_filter_rules.h
wlan_hdd_power.h	qcacld-3.0: Add driver command to request ANI level	2019-11-26 05:30:13 -08:00
wlan_hdd_regulatory.h	qcacld-3.0: Update regulatory configs before use	2019-11-21 04:41:29 -08:00
wlan_hdd_softap_tx_rx.h	qcacld-3.0: Move sta_info from array based to hash based	2019-10-15 00:48:54 -07:00
wlan_hdd_spectralscan.h	qcacld-3.0: Register spectral to DBR in hdd_wlan_start_modules	2019-11-25 16:14:41 -08:00
wlan_hdd_sysfs.h
wlan_hdd_tdls.h	qcacld-3.0: Cleanup sta_index in TDLS structures and APIs	2019-10-22 09:05:33 -07:00
wlan_hdd_trace.h
wlan_hdd_tsf.h	qcacld-3.0: Add support for gpio based strobe to capture tsf	2019-08-21 00:06:01 -07:00
wlan_hdd_twt.h	qcacld-3.0: Re-enable TWT before host TWT trigger mode	2019-10-09 16:16:43 -07:00
wlan_hdd_tx_rx.h	qcacld-3.0: Add support to flush rx packets for a vdev	2019-11-01 00:17:18 -07:00
wlan_hdd_wext.h	qcacld-3.0: Add support to configure HE SGI for SAP	2019-09-25 04:58:53 -07:00
wlan_hdd_wmm.h	qcacld-3.0: Rename HDD identifier wmmPrevTrafficCnt	2019-03-13 09:31:53 -07:00
wlan_hdd_wowl.h