android_kernel_xiaomi_sm8350/drivers/usb
inaky@linux.intel.com 4370525167 usb/hub: allow hubs up to 31 children
Current Wireless USB host hardware (Intel i1480 for example) allows up
to 22 devices to connect, thus bringing up the max number of children
in the WUSB Host Controller to 22 'fake' ports. Upcoming hardware
might raise that limit.

Makes almost no difference to go to 31, as the bit arrays are
byte-aligned (plus an extra bit in general), so 22 bits fit in 4 bytes
as 31 do.

As well, the only other array that depends on USB_MAXCHILDREN is
'struct usb_hub->indicator'. By declaring it 'u8' instead of 'enum
hub_led_mode', we reduce the size of each entry from 4 bytes (in i386)
to 1, which will add as we when are doubling USB_MAXCHILDREN
(with 16 the size of that array is 64 bytes, with 31 would be 128; by
using u8 that goes down to 31 bytes).

Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01 14:23:26 -08:00
..
atm UEAGLE: fix ueagle-atm Oops 2006-10-17 14:46:33 -07:00
class USB: usblp: fix system suspend for some systems 2006-11-03 11:57:18 -08:00
core usb/hub: allow hubs up to 31 children 2006-12-01 14:23:26 -08:00
gadget [PATCH] fix PXA2xx UDC compilation error 2006-10-20 17:56:39 -07:00
host USB: OHCI: fix root-hub resume bug 2006-11-16 14:26:11 -08:00
image IRQ: Maintain regs pointer globally rather than passing to IRQ handlers 2006-10-05 15:10:12 +01:00
input [PATCH] usb: ati remote memleak fix 2006-11-25 13:28:34 -08:00
misc USB: auerswald possible memleak fix 2006-11-16 14:26:12 -08:00
mon usbmon: don't call mon_dmapeek if DMA isn't being used 2006-09-27 11:58:56 -07:00
net USB: use MII hooks only if CONFIG_MII is enabled 2006-11-03 11:57:19 -08:00
serial USB: ipaq: Add HTC Modem Support 2006-11-16 14:26:12 -08:00
storage usb-storage: Remove duplicated unusual_devs.h entries for Sony Ericsson P990i 2006-11-16 14:26:12 -08:00
Kconfig USB OHCI controller support for PNX4008 2006-09-27 11:58:48 -07:00
Makefile USB: move trancevibrator.c to the proper usb directory 2006-10-17 14:46:32 -07:00
README
usb-skeleton.c IRQ: Maintain regs pointer globally rather than passing to IRQ handlers 2006-10-05 15:10:12 +01:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
input/		- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
media/		- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.