bd5824f138
The driver version number has not been updated since the driver was included in the main kernel tree and there is no plan on updating this in the future either. At this point, the only correct way to refer to the version is to use the kernel version. The 0.4.4 version is confusing since there are external version with higher version number even though they are not actually any newer than the in-tree version. Let's get rid of the version number in the kernel tree in order to avoid this kind of confusion. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
922 lines
24 KiB
C
922 lines
24 KiB
C
#define PRISM2_PCCARD
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/if.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/wireless.h>
|
|
#include <net/iw_handler.h>
|
|
|
|
#include <pcmcia/cs_types.h>
|
|
#include <pcmcia/cs.h>
|
|
#include <pcmcia/cistpl.h>
|
|
#include <pcmcia/cisreg.h>
|
|
#include <pcmcia/ds.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#include "hostap_wlan.h"
|
|
|
|
|
|
static dev_info_t dev_info = "hostap_cs";
|
|
|
|
MODULE_AUTHOR("Jouni Malinen");
|
|
MODULE_DESCRIPTION("Support for Intersil Prism2-based 802.11 wireless LAN "
|
|
"cards (PC Card).");
|
|
MODULE_SUPPORTED_DEVICE("Intersil Prism2-based WLAN cards (PC Card)");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
|
static int ignore_cis_vcc;
|
|
module_param(ignore_cis_vcc, int, 0444);
|
|
MODULE_PARM_DESC(ignore_cis_vcc, "Ignore broken CIS VCC entry");
|
|
|
|
|
|
/* struct local_info::hw_priv */
|
|
struct hostap_cs_priv {
|
|
dev_node_t node;
|
|
struct pcmcia_device *link;
|
|
int sandisk_connectplus;
|
|
};
|
|
|
|
|
|
#ifdef PRISM2_IO_DEBUG
|
|
|
|
static inline void hfa384x_outb_debug(struct net_device *dev, int a, u8 v)
|
|
{
|
|
struct hostap_interface *iface;
|
|
local_info_t *local;
|
|
unsigned long flags;
|
|
|
|
iface = netdev_priv(dev);
|
|
local = iface->local;
|
|
spin_lock_irqsave(&local->lock, flags);
|
|
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTB, a, v);
|
|
outb(v, dev->base_addr + a);
|
|
spin_unlock_irqrestore(&local->lock, flags);
|
|
}
|
|
|
|
static inline u8 hfa384x_inb_debug(struct net_device *dev, int a)
|
|
{
|
|
struct hostap_interface *iface;
|
|
local_info_t *local;
|
|
unsigned long flags;
|
|
u8 v;
|
|
|
|
iface = netdev_priv(dev);
|
|
local = iface->local;
|
|
spin_lock_irqsave(&local->lock, flags);
|
|
v = inb(dev->base_addr + a);
|
|
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INB, a, v);
|
|
spin_unlock_irqrestore(&local->lock, flags);
|
|
return v;
|
|
}
|
|
|
|
static inline void hfa384x_outw_debug(struct net_device *dev, int a, u16 v)
|
|
{
|
|
struct hostap_interface *iface;
|
|
local_info_t *local;
|
|
unsigned long flags;
|
|
|
|
iface = netdev_priv(dev);
|
|
local = iface->local;
|
|
spin_lock_irqsave(&local->lock, flags);
|
|
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTW, a, v);
|
|
outw(v, dev->base_addr + a);
|
|
spin_unlock_irqrestore(&local->lock, flags);
|
|
}
|
|
|
|
static inline u16 hfa384x_inw_debug(struct net_device *dev, int a)
|
|
{
|
|
struct hostap_interface *iface;
|
|
local_info_t *local;
|
|
unsigned long flags;
|
|
u16 v;
|
|
|
|
iface = netdev_priv(dev);
|
|
local = iface->local;
|
|
spin_lock_irqsave(&local->lock, flags);
|
|
v = inw(dev->base_addr + a);
|
|
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INW, a, v);
|
|
spin_unlock_irqrestore(&local->lock, flags);
|
|
return v;
|
|
}
|
|
|
|
static inline void hfa384x_outsw_debug(struct net_device *dev, int a,
|
|
u8 *buf, int wc)
|
|
{
|
|
struct hostap_interface *iface;
|
|
local_info_t *local;
|
|
unsigned long flags;
|
|
|
|
iface = netdev_priv(dev);
|
|
local = iface->local;
|
|
spin_lock_irqsave(&local->lock, flags);
|
|
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTSW, a, wc);
|
|
outsw(dev->base_addr + a, buf, wc);
|
|
spin_unlock_irqrestore(&local->lock, flags);
|
|
}
|
|
|
|
static inline void hfa384x_insw_debug(struct net_device *dev, int a,
|
|
u8 *buf, int wc)
|
|
{
|
|
struct hostap_interface *iface;
|
|
local_info_t *local;
|
|
unsigned long flags;
|
|
|
|
iface = netdev_priv(dev);
|
|
local = iface->local;
|
|
spin_lock_irqsave(&local->lock, flags);
|
|
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INSW, a, wc);
|
|
insw(dev->base_addr + a, buf, wc);
|
|
spin_unlock_irqrestore(&local->lock, flags);
|
|
}
|
|
|
|
#define HFA384X_OUTB(v,a) hfa384x_outb_debug(dev, (a), (v))
|
|
#define HFA384X_INB(a) hfa384x_inb_debug(dev, (a))
|
|
#define HFA384X_OUTW(v,a) hfa384x_outw_debug(dev, (a), (v))
|
|
#define HFA384X_INW(a) hfa384x_inw_debug(dev, (a))
|
|
#define HFA384X_OUTSW(a, buf, wc) hfa384x_outsw_debug(dev, (a), (buf), (wc))
|
|
#define HFA384X_INSW(a, buf, wc) hfa384x_insw_debug(dev, (a), (buf), (wc))
|
|
|
|
#else /* PRISM2_IO_DEBUG */
|
|
|
|
#define HFA384X_OUTB(v,a) outb((v), dev->base_addr + (a))
|
|
#define HFA384X_INB(a) inb(dev->base_addr + (a))
|
|
#define HFA384X_OUTW(v,a) outw((v), dev->base_addr + (a))
|
|
#define HFA384X_INW(a) inw(dev->base_addr + (a))
|
|
#define HFA384X_INSW(a, buf, wc) insw(dev->base_addr + (a), buf, wc)
|
|
#define HFA384X_OUTSW(a, buf, wc) outsw(dev->base_addr + (a), buf, wc)
|
|
|
|
#endif /* PRISM2_IO_DEBUG */
|
|
|
|
|
|
static int hfa384x_from_bap(struct net_device *dev, u16 bap, void *buf,
|
|
int len)
|
|
{
|
|
u16 d_off;
|
|
u16 *pos;
|
|
|
|
d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF;
|
|
pos = (u16 *) buf;
|
|
|
|
if (len / 2)
|
|
HFA384X_INSW(d_off, buf, len / 2);
|
|
pos += len / 2;
|
|
|
|
if (len & 1)
|
|
*((char *) pos) = HFA384X_INB(d_off);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int hfa384x_to_bap(struct net_device *dev, u16 bap, void *buf, int len)
|
|
{
|
|
u16 d_off;
|
|
u16 *pos;
|
|
|
|
d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF;
|
|
pos = (u16 *) buf;
|
|
|
|
if (len / 2)
|
|
HFA384X_OUTSW(d_off, buf, len / 2);
|
|
pos += len / 2;
|
|
|
|
if (len & 1)
|
|
HFA384X_OUTB(*((char *) pos), d_off);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* FIX: This might change at some point.. */
|
|
#include "hostap_hw.c"
|
|
|
|
|
|
|
|
static void prism2_detach(struct pcmcia_device *p_dev);
|
|
static void prism2_release(u_long arg);
|
|
static int prism2_config(struct pcmcia_device *link);
|
|
|
|
|
|
static int prism2_pccard_card_present(local_info_t *local)
|
|
{
|
|
struct hostap_cs_priv *hw_priv = local->hw_priv;
|
|
if (hw_priv != NULL && hw_priv->link != NULL && pcmcia_dev_present(hw_priv->link))
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* SanDisk CompactFlash WLAN Flashcard - Product Manual v1.0
|
|
* Document No. 20-10-00058, January 2004
|
|
* http://www.sandisk.com/pdf/industrial/ProdManualCFWLANv1.0.pdf
|
|
*/
|
|
#define SANDISK_WLAN_ACTIVATION_OFF 0x40
|
|
#define SANDISK_HCR_OFF 0x42
|
|
|
|
|
|
static void sandisk_set_iobase(local_info_t *local)
|
|
{
|
|
int res;
|
|
conf_reg_t reg;
|
|
struct hostap_cs_priv *hw_priv = local->hw_priv;
|
|
|
|
reg.Function = 0;
|
|
reg.Action = CS_WRITE;
|
|
reg.Offset = 0x10; /* 0x3f0 IO base 1 */
|
|
reg.Value = hw_priv->link->io.BasePort1 & 0x00ff;
|
|
res = pcmcia_access_configuration_register(hw_priv->link,
|
|
®);
|
|
if (res != CS_SUCCESS) {
|
|
printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 0 -"
|
|
" res=%d\n", res);
|
|
}
|
|
udelay(10);
|
|
|
|
reg.Function = 0;
|
|
reg.Action = CS_WRITE;
|
|
reg.Offset = 0x12; /* 0x3f2 IO base 2 */
|
|
reg.Value = (hw_priv->link->io.BasePort1 & 0xff00) >> 8;
|
|
res = pcmcia_access_configuration_register(hw_priv->link,
|
|
®);
|
|
if (res != CS_SUCCESS) {
|
|
printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 1 -"
|
|
" res=%d\n", res);
|
|
}
|
|
}
|
|
|
|
|
|
static void sandisk_write_hcr(local_info_t *local, int hcr)
|
|
{
|
|
struct net_device *dev = local->dev;
|
|
int i;
|
|
|
|
HFA384X_OUTB(0x80, SANDISK_WLAN_ACTIVATION_OFF);
|
|
udelay(50);
|
|
for (i = 0; i < 10; i++) {
|
|
HFA384X_OUTB(hcr, SANDISK_HCR_OFF);
|
|
}
|
|
udelay(55);
|
|
HFA384X_OUTB(0x45, SANDISK_WLAN_ACTIVATION_OFF);
|
|
}
|
|
|
|
|
|
static int sandisk_enable_wireless(struct net_device *dev)
|
|
{
|
|
int res, ret = 0;
|
|
conf_reg_t reg;
|
|
struct hostap_interface *iface = dev->priv;
|
|
local_info_t *local = iface->local;
|
|
tuple_t tuple;
|
|
cisparse_t *parse = NULL;
|
|
u_char buf[64];
|
|
struct hostap_cs_priv *hw_priv = local->hw_priv;
|
|
|
|
if (hw_priv->link->io.NumPorts1 < 0x42) {
|
|
/* Not enough ports to be SanDisk multi-function card */
|
|
ret = -ENODEV;
|
|
goto done;
|
|
}
|
|
|
|
parse = kmalloc(sizeof(cisparse_t), GFP_KERNEL);
|
|
if (parse == NULL) {
|
|
ret = -ENOMEM;
|
|
goto done;
|
|
}
|
|
|
|
tuple.Attributes = TUPLE_RETURN_COMMON;
|
|
tuple.TupleData = buf;
|
|
tuple.TupleDataMax = sizeof(buf);
|
|
tuple.TupleOffset = 0;
|
|
|
|
if (hw_priv->link->manf_id != 0xd601 || hw_priv->link->card_id != 0x0101) {
|
|
/* No SanDisk manfid found */
|
|
ret = -ENODEV;
|
|
goto done;
|
|
}
|
|
|
|
tuple.DesiredTuple = CISTPL_LONGLINK_MFC;
|
|
if (pcmcia_get_first_tuple(hw_priv->link, &tuple) ||
|
|
pcmcia_get_tuple_data(hw_priv->link, &tuple) ||
|
|
pcmcia_parse_tuple(hw_priv->link, &tuple, parse) ||
|
|
parse->longlink_mfc.nfn < 2) {
|
|
/* No multi-function links found */
|
|
ret = -ENODEV;
|
|
goto done;
|
|
}
|
|
|
|
printk(KERN_DEBUG "%s: Multi-function SanDisk ConnectPlus detected"
|
|
" - using vendor-specific initialization\n", dev->name);
|
|
hw_priv->sandisk_connectplus = 1;
|
|
|
|
reg.Function = 0;
|
|
reg.Action = CS_WRITE;
|
|
reg.Offset = CISREG_COR;
|
|
reg.Value = COR_SOFT_RESET;
|
|
res = pcmcia_access_configuration_register(hw_priv->link,
|
|
®);
|
|
if (res != CS_SUCCESS) {
|
|
printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
|
|
dev->name, res);
|
|
goto done;
|
|
}
|
|
mdelay(5);
|
|
|
|
reg.Function = 0;
|
|
reg.Action = CS_WRITE;
|
|
reg.Offset = CISREG_COR;
|
|
/*
|
|
* Do not enable interrupts here to avoid some bogus events. Interrupts
|
|
* will be enabled during the first cor_sreset call.
|
|
*/
|
|
reg.Value = COR_LEVEL_REQ | 0x8 | COR_ADDR_DECODE | COR_FUNC_ENA;
|
|
res = pcmcia_access_configuration_register(hw_priv->link,
|
|
®);
|
|
if (res != CS_SUCCESS) {
|
|
printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
|
|
dev->name, res);
|
|
goto done;
|
|
}
|
|
mdelay(5);
|
|
|
|
sandisk_set_iobase(local);
|
|
|
|
HFA384X_OUTB(0xc5, SANDISK_WLAN_ACTIVATION_OFF);
|
|
udelay(10);
|
|
HFA384X_OUTB(0x4b, SANDISK_WLAN_ACTIVATION_OFF);
|
|
udelay(10);
|
|
|
|
done:
|
|
kfree(parse);
|
|
return ret;
|
|
}
|
|
|
|
|
|
static void prism2_pccard_cor_sreset(local_info_t *local)
|
|
{
|
|
int res;
|
|
conf_reg_t reg;
|
|
struct hostap_cs_priv *hw_priv = local->hw_priv;
|
|
|
|
if (!prism2_pccard_card_present(local))
|
|
return;
|
|
|
|
reg.Function = 0;
|
|
reg.Action = CS_READ;
|
|
reg.Offset = CISREG_COR;
|
|
reg.Value = 0;
|
|
res = pcmcia_access_configuration_register(hw_priv->link,
|
|
®);
|
|
if (res != CS_SUCCESS) {
|
|
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 1 (%d)\n",
|
|
res);
|
|
return;
|
|
}
|
|
printk(KERN_DEBUG "prism2_pccard_cor_sreset: original COR %02x\n",
|
|
reg.Value);
|
|
|
|
reg.Action = CS_WRITE;
|
|
reg.Value |= COR_SOFT_RESET;
|
|
res = pcmcia_access_configuration_register(hw_priv->link,
|
|
®);
|
|
if (res != CS_SUCCESS) {
|
|
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 2 (%d)\n",
|
|
res);
|
|
return;
|
|
}
|
|
|
|
mdelay(hw_priv->sandisk_connectplus ? 5 : 2);
|
|
|
|
reg.Value &= ~COR_SOFT_RESET;
|
|
if (hw_priv->sandisk_connectplus)
|
|
reg.Value |= COR_IREQ_ENA;
|
|
res = pcmcia_access_configuration_register(hw_priv->link,
|
|
®);
|
|
if (res != CS_SUCCESS) {
|
|
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 3 (%d)\n",
|
|
res);
|
|
return;
|
|
}
|
|
|
|
mdelay(hw_priv->sandisk_connectplus ? 5 : 2);
|
|
|
|
if (hw_priv->sandisk_connectplus)
|
|
sandisk_set_iobase(local);
|
|
}
|
|
|
|
|
|
static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
|
|
{
|
|
int res;
|
|
conf_reg_t reg;
|
|
int old_cor;
|
|
struct hostap_cs_priv *hw_priv = local->hw_priv;
|
|
|
|
if (!prism2_pccard_card_present(local))
|
|
return;
|
|
|
|
if (hw_priv->sandisk_connectplus) {
|
|
sandisk_write_hcr(local, hcr);
|
|
return;
|
|
}
|
|
|
|
reg.Function = 0;
|
|
reg.Action = CS_READ;
|
|
reg.Offset = CISREG_COR;
|
|
reg.Value = 0;
|
|
res = pcmcia_access_configuration_register(hw_priv->link,
|
|
®);
|
|
if (res != CS_SUCCESS) {
|
|
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 1 "
|
|
"(%d)\n", res);
|
|
return;
|
|
}
|
|
printk(KERN_DEBUG "prism2_pccard_genesis_sreset: original COR %02x\n",
|
|
reg.Value);
|
|
old_cor = reg.Value;
|
|
|
|
reg.Action = CS_WRITE;
|
|
reg.Value |= COR_SOFT_RESET;
|
|
res = pcmcia_access_configuration_register(hw_priv->link,
|
|
®);
|
|
if (res != CS_SUCCESS) {
|
|
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 2 "
|
|
"(%d)\n", res);
|
|
return;
|
|
}
|
|
|
|
mdelay(10);
|
|
|
|
/* Setup Genesis mode */
|
|
reg.Action = CS_WRITE;
|
|
reg.Value = hcr;
|
|
reg.Offset = CISREG_CCSR;
|
|
res = pcmcia_access_configuration_register(hw_priv->link,
|
|
®);
|
|
if (res != CS_SUCCESS) {
|
|
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 3 "
|
|
"(%d)\n", res);
|
|
return;
|
|
}
|
|
mdelay(10);
|
|
|
|
reg.Action = CS_WRITE;
|
|
reg.Offset = CISREG_COR;
|
|
reg.Value = old_cor & ~COR_SOFT_RESET;
|
|
res = pcmcia_access_configuration_register(hw_priv->link,
|
|
®);
|
|
if (res != CS_SUCCESS) {
|
|
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 4 "
|
|
"(%d)\n", res);
|
|
return;
|
|
}
|
|
|
|
mdelay(10);
|
|
}
|
|
|
|
|
|
static struct prism2_helper_functions prism2_pccard_funcs =
|
|
{
|
|
.card_present = prism2_pccard_card_present,
|
|
.cor_sreset = prism2_pccard_cor_sreset,
|
|
.genesis_reset = prism2_pccard_genesis_reset,
|
|
.hw_type = HOSTAP_HW_PCCARD,
|
|
};
|
|
|
|
|
|
/* allocate local data and register with CardServices
|
|
* initialize dev_link structure, but do not configure the card yet */
|
|
static int hostap_cs_probe(struct pcmcia_device *p_dev)
|
|
{
|
|
int ret;
|
|
|
|
PDEBUG(DEBUG_HW, "%s: setting Vcc=33 (constant)\n", dev_info);
|
|
p_dev->conf.IntType = INT_MEMORY_AND_IO;
|
|
|
|
ret = prism2_config(p_dev);
|
|
if (ret) {
|
|
PDEBUG(DEBUG_EXTRA, "prism2_config() failed\n");
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
|
|
static void prism2_detach(struct pcmcia_device *link)
|
|
{
|
|
PDEBUG(DEBUG_FLOW, "prism2_detach\n");
|
|
|
|
prism2_release((u_long)link);
|
|
|
|
/* release net devices */
|
|
if (link->priv) {
|
|
struct hostap_cs_priv *hw_priv;
|
|
struct net_device *dev;
|
|
struct hostap_interface *iface;
|
|
dev = link->priv;
|
|
iface = netdev_priv(dev);
|
|
hw_priv = iface->local->hw_priv;
|
|
prism2_free_local_data(dev);
|
|
kfree(hw_priv);
|
|
}
|
|
}
|
|
|
|
|
|
#define CS_CHECK(fn, ret) \
|
|
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
|
|
|
|
#define CFG_CHECK2(fn, retf) \
|
|
do { int ret = (retf); \
|
|
if (ret != 0) { \
|
|
PDEBUG(DEBUG_EXTRA, "CardServices(" #fn ") returned %d\n", ret); \
|
|
cs_error(link, fn, ret); \
|
|
goto next_entry; \
|
|
} \
|
|
} while (0)
|
|
|
|
|
|
/* run after a CARD_INSERTION event is received to configure the PCMCIA
|
|
* socket and make the device available to the system */
|
|
static int prism2_config(struct pcmcia_device *link)
|
|
{
|
|
struct net_device *dev;
|
|
struct hostap_interface *iface;
|
|
local_info_t *local;
|
|
int ret = 1;
|
|
tuple_t tuple;
|
|
cisparse_t *parse;
|
|
int last_fn, last_ret;
|
|
u_char buf[64];
|
|
config_info_t conf;
|
|
cistpl_cftable_entry_t dflt = { 0 };
|
|
struct hostap_cs_priv *hw_priv;
|
|
|
|
PDEBUG(DEBUG_FLOW, "prism2_config()\n");
|
|
|
|
parse = kmalloc(sizeof(cisparse_t), GFP_KERNEL);
|
|
hw_priv = kzalloc(sizeof(*hw_priv), GFP_KERNEL);
|
|
if (parse == NULL || hw_priv == NULL) {
|
|
ret = -ENOMEM;
|
|
goto failed;
|
|
}
|
|
|
|
tuple.Attributes = 0;
|
|
tuple.TupleData = buf;
|
|
tuple.TupleDataMax = sizeof(buf);
|
|
tuple.TupleOffset = 0;
|
|
|
|
CS_CHECK(GetConfigurationInfo,
|
|
pcmcia_get_configuration_info(link, &conf));
|
|
|
|
/* Look for an appropriate configuration table entry in the CIS */
|
|
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
|
|
CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
|
|
for (;;) {
|
|
cistpl_cftable_entry_t *cfg = &(parse->cftable_entry);
|
|
CFG_CHECK2(GetTupleData,
|
|
pcmcia_get_tuple_data(link, &tuple));
|
|
CFG_CHECK2(ParseTuple,
|
|
pcmcia_parse_tuple(link, &tuple, parse));
|
|
|
|
if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
|
|
dflt = *cfg;
|
|
if (cfg->index == 0)
|
|
goto next_entry;
|
|
link->conf.ConfigIndex = cfg->index;
|
|
PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X "
|
|
"(default 0x%02X)\n", cfg->index, dflt.index);
|
|
|
|
/* Does this card need audio output? */
|
|
if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
|
|
link->conf.Attributes |= CONF_ENABLE_SPKR;
|
|
link->conf.Status = CCSR_AUDIO_ENA;
|
|
}
|
|
|
|
/* Use power settings for Vcc and Vpp if present */
|
|
/* Note that the CIS values need to be rescaled */
|
|
if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
|
|
if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] /
|
|
10000 && !ignore_cis_vcc) {
|
|
PDEBUG(DEBUG_EXTRA, " Vcc mismatch - skipping"
|
|
" this entry\n");
|
|
goto next_entry;
|
|
}
|
|
} else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
|
|
if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] /
|
|
10000 && !ignore_cis_vcc) {
|
|
PDEBUG(DEBUG_EXTRA, " Vcc (default) mismatch "
|
|
"- skipping this entry\n");
|
|
goto next_entry;
|
|
}
|
|
}
|
|
|
|
if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
|
|
link->conf.Vpp =
|
|
cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
|
|
else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
|
|
link->conf.Vpp =
|
|
dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
|
|
|
|
/* Do we need to allocate an interrupt? */
|
|
if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
|
|
link->conf.Attributes |= CONF_ENABLE_IRQ;
|
|
else if (!(link->conf.Attributes & CONF_ENABLE_IRQ)) {
|
|
/* At least Compaq WL200 does not have IRQInfo1 set,
|
|
* but it does not work without interrupts.. */
|
|
printk("Config has no IRQ info, but trying to enable "
|
|
"IRQ anyway..\n");
|
|
link->conf.Attributes |= CONF_ENABLE_IRQ;
|
|
}
|
|
|
|
/* IO window settings */
|
|
PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
|
|
"dflt.io.nwin=%d\n",
|
|
cfg->io.nwin, dflt.io.nwin);
|
|
link->io.NumPorts1 = link->io.NumPorts2 = 0;
|
|
if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
|
|
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
|
|
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
|
|
PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, "
|
|
"io.base=0x%04x, len=%d\n", io->flags,
|
|
io->win[0].base, io->win[0].len);
|
|
if (!(io->flags & CISTPL_IO_8BIT))
|
|
link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
|
|
if (!(io->flags & CISTPL_IO_16BIT))
|
|
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
|
|
link->io.IOAddrLines = io->flags &
|
|
CISTPL_IO_LINES_MASK;
|
|
link->io.BasePort1 = io->win[0].base;
|
|
link->io.NumPorts1 = io->win[0].len;
|
|
if (io->nwin > 1) {
|
|
link->io.Attributes2 = link->io.Attributes1;
|
|
link->io.BasePort2 = io->win[1].base;
|
|
link->io.NumPorts2 = io->win[1].len;
|
|
}
|
|
}
|
|
|
|
/* This reserves IO space but doesn't actually enable it */
|
|
CFG_CHECK2(RequestIO,
|
|
pcmcia_request_io(link, &link->io));
|
|
|
|
/* This configuration table entry is OK */
|
|
break;
|
|
|
|
next_entry:
|
|
CS_CHECK(GetNextTuple,
|
|
pcmcia_get_next_tuple(link, &tuple));
|
|
}
|
|
|
|
/* Need to allocate net_device before requesting IRQ handler */
|
|
dev = prism2_init_local_data(&prism2_pccard_funcs, 0,
|
|
&handle_to_dev(link));
|
|
if (dev == NULL)
|
|
goto failed;
|
|
link->priv = dev;
|
|
|
|
iface = netdev_priv(dev);
|
|
local = iface->local;
|
|
local->hw_priv = hw_priv;
|
|
hw_priv->link = link;
|
|
strcpy(hw_priv->node.dev_name, dev->name);
|
|
link->dev_node = &hw_priv->node;
|
|
|
|
/*
|
|
* Allocate an interrupt line. Note that this does not assign a
|
|
* handler to the interrupt, unless the 'Handler' member of the
|
|
* irq structure is initialized.
|
|
*/
|
|
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
|
|
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
|
|
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
|
|
link->irq.Handler = prism2_interrupt;
|
|
link->irq.Instance = dev;
|
|
CS_CHECK(RequestIRQ,
|
|
pcmcia_request_irq(link, &link->irq));
|
|
}
|
|
|
|
/*
|
|
* This actually configures the PCMCIA socket -- setting up
|
|
* the I/O windows and the interrupt mapping, and putting the
|
|
* card and host interface into "Memory and IO" mode.
|
|
*/
|
|
CS_CHECK(RequestConfiguration,
|
|
pcmcia_request_configuration(link, &link->conf));
|
|
|
|
dev->irq = link->irq.AssignedIRQ;
|
|
dev->base_addr = link->io.BasePort1;
|
|
|
|
/* Finally, report what we've done */
|
|
printk(KERN_INFO "%s: index 0x%02x: ",
|
|
dev_info, link->conf.ConfigIndex);
|
|
if (link->conf.Vpp)
|
|
printk(", Vpp %d.%d", link->conf.Vpp / 10,
|
|
link->conf.Vpp % 10);
|
|
if (link->conf.Attributes & CONF_ENABLE_IRQ)
|
|
printk(", irq %d", link->irq.AssignedIRQ);
|
|
if (link->io.NumPorts1)
|
|
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
|
|
link->io.BasePort1+link->io.NumPorts1-1);
|
|
if (link->io.NumPorts2)
|
|
printk(" & 0x%04x-0x%04x", link->io.BasePort2,
|
|
link->io.BasePort2+link->io.NumPorts2-1);
|
|
printk("\n");
|
|
|
|
local->shutdown = 0;
|
|
|
|
sandisk_enable_wireless(dev);
|
|
|
|
ret = prism2_hw_config(dev, 1);
|
|
if (!ret) {
|
|
ret = hostap_hw_ready(dev);
|
|
if (ret == 0 && local->ddev)
|
|
strcpy(hw_priv->node.dev_name, local->ddev->name);
|
|
}
|
|
kfree(parse);
|
|
return ret;
|
|
|
|
cs_failed:
|
|
cs_error(link, last_fn, last_ret);
|
|
|
|
failed:
|
|
kfree(parse);
|
|
kfree(hw_priv);
|
|
prism2_release((u_long)link);
|
|
return ret;
|
|
}
|
|
|
|
|
|
static void prism2_release(u_long arg)
|
|
{
|
|
struct pcmcia_device *link = (struct pcmcia_device *)arg;
|
|
|
|
PDEBUG(DEBUG_FLOW, "prism2_release\n");
|
|
|
|
if (link->priv) {
|
|
struct net_device *dev = link->priv;
|
|
struct hostap_interface *iface;
|
|
|
|
iface = netdev_priv(dev);
|
|
prism2_hw_shutdown(dev, 0);
|
|
iface->local->shutdown = 1;
|
|
}
|
|
|
|
pcmcia_disable_device(link);
|
|
PDEBUG(DEBUG_FLOW, "release - done\n");
|
|
}
|
|
|
|
static int hostap_cs_suspend(struct pcmcia_device *link)
|
|
{
|
|
struct net_device *dev = (struct net_device *) link->priv;
|
|
int dev_open = 0;
|
|
struct hostap_interface *iface = NULL;
|
|
|
|
if (dev)
|
|
iface = netdev_priv(dev);
|
|
|
|
PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_PM_SUSPEND\n", dev_info);
|
|
if (iface && iface->local)
|
|
dev_open = iface->local->num_dev_open > 0;
|
|
if (dev_open) {
|
|
netif_stop_queue(dev);
|
|
netif_device_detach(dev);
|
|
}
|
|
prism2_suspend(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hostap_cs_resume(struct pcmcia_device *link)
|
|
{
|
|
struct net_device *dev = (struct net_device *) link->priv;
|
|
int dev_open = 0;
|
|
struct hostap_interface *iface = NULL;
|
|
|
|
if (dev)
|
|
iface = netdev_priv(dev);
|
|
|
|
PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_PM_RESUME\n", dev_info);
|
|
|
|
if (iface && iface->local)
|
|
dev_open = iface->local->num_dev_open > 0;
|
|
|
|
prism2_hw_shutdown(dev, 1);
|
|
prism2_hw_config(dev, dev_open ? 0 : 1);
|
|
if (dev_open) {
|
|
netif_device_attach(dev);
|
|
netif_start_queue(dev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct pcmcia_device_id hostap_cs_ids[] = {
|
|
PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100),
|
|
PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300),
|
|
PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777),
|
|
PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000),
|
|
PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002),
|
|
PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002),
|
|
PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030b),
|
|
PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612),
|
|
PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613),
|
|
PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002),
|
|
PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002),
|
|
PCMCIA_DEVICE_MANF_CARD(0x02d2, 0x0001),
|
|
PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x0001),
|
|
PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300),
|
|
/* PCMCIA_DEVICE_MANF_CARD(0xc00f, 0x0000), conflict with pcnet_cs */
|
|
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002),
|
|
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005),
|
|
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0010),
|
|
PCMCIA_DEVICE_MANF_CARD(0x0126, 0x0002),
|
|
PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0xd601, 0x0005, "ADLINK 345 CF",
|
|
0x2d858104),
|
|
PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0x0156, 0x0002, "INTERSIL",
|
|
0x74c5e40d),
|
|
PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0x0156, 0x0002, "Intersil",
|
|
0x4b801a17),
|
|
PCMCIA_MFC_DEVICE_PROD_ID12(0, "SanDisk", "ConnectPlus",
|
|
0x7a954bd9, 0x74be00c6),
|
|
PCMCIA_DEVICE_PROD_ID1234(
|
|
"Intersil", "PRISM 2_5 PCMCIA ADAPTER", "ISL37300P",
|
|
"Eval-RevA",
|
|
0x4b801a17, 0x6345a0bf, 0xc9049a39, 0xc23adc0e),
|
|
/* D-Link DWL-650 Rev. P1; manfid 0x000b, 0x7110 */
|
|
PCMCIA_DEVICE_PROD_ID1234(
|
|
"D-Link", "DWL-650 Wireless PC Card RevP", "ISL37101P-10",
|
|
"A3",
|
|
0x1a424a1c, 0x6ea57632, 0xdd97a26b, 0x56b21f52),
|
|
PCMCIA_DEVICE_PROD_ID123(
|
|
"Addtron", "AWP-100 Wireless PCMCIA", "Version 01.02",
|
|
0xe6ec52ce, 0x08649af2, 0x4b74baa0),
|
|
PCMCIA_DEVICE_PROD_ID123(
|
|
"D", "Link DWL-650 11Mbps WLAN Card", "Version 01.02",
|
|
0x71b18589, 0xb6f1b0ab, 0x4b74baa0),
|
|
PCMCIA_DEVICE_PROD_ID123(
|
|
"Instant Wireless ", " Network PC CARD", "Version 01.02",
|
|
0x11d901af, 0x6e9bd926, 0x4b74baa0),
|
|
PCMCIA_DEVICE_PROD_ID123(
|
|
"SMC", "SMC2632W", "Version 01.02",
|
|
0xc4f8b18b, 0x474a1f2a, 0x4b74baa0),
|
|
PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G",
|
|
0x2decece3, 0x82067c18),
|
|
PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card",
|
|
0x54f7c49c, 0x15a75e5b),
|
|
PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE",
|
|
0x74c5e40d, 0xdb472a18),
|
|
PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card",
|
|
0x0733cc81, 0x0c52f395),
|
|
PCMCIA_DEVICE_PROD_ID12(
|
|
"ZoomAir 11Mbps High", "Rate wireless Networking",
|
|
0x273fe3db, 0x32a1eaee),
|
|
PCMCIA_DEVICE_PROD_ID123(
|
|
"Pretec", "CompactWLAN Card 802.11b", "2.5",
|
|
0x1cadd3e5, 0xe697636c, 0x7a5bfcf1),
|
|
PCMCIA_DEVICE_PROD_ID123(
|
|
"U.S. Robotics", "IEEE 802.11b PC-CARD", "Version 01.02",
|
|
0xc7b8df9d, 0x1700d087, 0x4b74baa0),
|
|
PCMCIA_DEVICE_PROD_ID123(
|
|
"Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio",
|
|
"Ver. 1.00",
|
|
0x5cd01705, 0x4271660f, 0x9d08ee12),
|
|
PCMCIA_DEVICE_PROD_ID123(
|
|
"corega", "WL PCCL-11", "ISL37300P",
|
|
0xa21501a, 0x59868926, 0xc9049a39),
|
|
PCMCIA_DEVICE_NULL
|
|
};
|
|
MODULE_DEVICE_TABLE(pcmcia, hostap_cs_ids);
|
|
|
|
|
|
static struct pcmcia_driver hostap_driver = {
|
|
.drv = {
|
|
.name = "hostap_cs",
|
|
},
|
|
.probe = hostap_cs_probe,
|
|
.remove = prism2_detach,
|
|
.owner = THIS_MODULE,
|
|
.id_table = hostap_cs_ids,
|
|
.suspend = hostap_cs_suspend,
|
|
.resume = hostap_cs_resume,
|
|
};
|
|
|
|
static int __init init_prism2_pccard(void)
|
|
{
|
|
return pcmcia_register_driver(&hostap_driver);
|
|
}
|
|
|
|
static void __exit exit_prism2_pccard(void)
|
|
{
|
|
pcmcia_unregister_driver(&hostap_driver);
|
|
}
|
|
|
|
|
|
module_init(init_prism2_pccard);
|
|
module_exit(exit_prism2_pccard);
|