android_kernel_xiaomi_sm8350/arch/ppc/platforms/k2.c
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

614 lines
16 KiB
C

/*
* arch/ppc/platforms/k2.c
*
* Board setup routines for SBS K2
*
* Author: Matt Porter <mporter@mvista.com>
*
* Updated by: Randy Vinson <rvinson@mvista.com.
*
* 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <linux/config.h>
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/reboot.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/types.h>
#include <linux/major.h>
#include <linux/initrd.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/ide.h>
#include <linux/irq.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/dma.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/time.h>
#include <asm/i8259.h>
#include <asm/todc.h>
#include <asm/bootinfo.h>
#include <syslib/cpc710.h>
#include "k2.h"
extern unsigned long loops_per_jiffy;
extern void gen550_progress(char *, unsigned short);
static unsigned int cpu_7xx[16] = {
0, 15, 14, 0, 0, 13, 5, 9, 6, 11, 8, 10, 16, 12, 7, 0
};
static unsigned int cpu_6xx[16] = {
0, 0, 14, 0, 0, 13, 5, 9, 6, 11, 8, 10, 0, 12, 7, 0
};
static inline int __init
k2_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
{
struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
/*
* Check our hose index. If we are zero then we are on the
* local PCI hose, otherwise we are on the cPCI hose.
*/
if (!hose->index) {
static char pci_irq_table[][4] =
/*
* PCI IDSEL/INTPIN->INTLINE
* A B C D
*/
{
{1, 0, 0, 0}, /* Ethernet */
{5, 5, 5, 5}, /* PMC Site 1 */
{6, 6, 6, 6}, /* PMC Site 2 */
{0, 0, 0, 0}, /* unused */
{0, 0, 0, 0}, /* unused */
{0, 0, 0, 0}, /* PCI-ISA Bridge */
{0, 0, 0, 0}, /* unused */
{0, 0, 0, 0}, /* unused */
{0, 0, 0, 0}, /* unused */
{0, 0, 0, 0}, /* unused */
{0, 0, 0, 0}, /* unused */
{0, 0, 0, 0}, /* unused */
{0, 0, 0, 0}, /* unused */
{0, 0, 0, 0}, /* unused */
{15, 0, 0, 0}, /* M5229 IDE */
};
const long min_idsel = 3, max_idsel = 17, irqs_per_slot = 4;
return PCI_IRQ_TABLE_LOOKUP;
} else {
static char pci_irq_table[][4] =
/*
* PCI IDSEL/INTPIN->INTLINE
* A B C D
*/
{
{10, 11, 12, 9}, /* cPCI slot 8 */
{11, 12, 9, 10}, /* cPCI slot 7 */
{12, 9, 10, 11}, /* cPCI slot 6 */
{9, 10, 11, 12}, /* cPCI slot 5 */
{10, 11, 12, 9}, /* cPCI slot 4 */
{11, 12, 9, 10}, /* cPCI slot 3 */
{12, 9, 10, 11}, /* cPCI slot 2 */
};
const long min_idsel = 15, max_idsel = 21, irqs_per_slot = 4;
return PCI_IRQ_TABLE_LOOKUP;
}
}
void k2_pcibios_fixup(void)
{
#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
struct pci_dev *ide_dev;
/*
* Enable DMA support on hdc
*/
ide_dev = pci_get_device(PCI_VENDOR_ID_AL,
PCI_DEVICE_ID_AL_M5229, NULL);
if (ide_dev) {
unsigned long ide_dma_base;
ide_dma_base = pci_resource_start(ide_dev, 4);
outb(0x00, ide_dma_base + 0x2);
outb(0x20, ide_dma_base + 0xa);
pci_dev_put(ide_dev);
}
#endif
}
void k2_pcibios_fixup_resources(struct pci_dev *dev)
{
int i;
if ((dev->vendor == PCI_VENDOR_ID_IBM) &&
(dev->device == PCI_DEVICE_ID_IBM_CPC710_PCI64)) {
pr_debug("Fixup CPC710 resources\n");
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
dev->resource[i].start = 0;
dev->resource[i].end = 0;
}
}
}
void k2_setup_hoses(void)
{
struct pci_controller *hose_a, *hose_b;
/*
* Reconfigure CPC710 memory map so
* we have some more PCI memory space.
*/
/* Set FPHB mode */
__raw_writel(0x808000e0, PGCHP); /* Set FPHB mode */
/* PCI32 mappings */
__raw_writel(0x00000000, K2_PCI32_BAR + PIBAR); /* PCI I/O base */
__raw_writel(0x00000000, K2_PCI32_BAR + PMBAR); /* PCI Mem base */
__raw_writel(0xf0000000, K2_PCI32_BAR + MSIZE); /* 256MB */
__raw_writel(0xfff00000, K2_PCI32_BAR + IOSIZE); /* 1MB */
__raw_writel(0xc0000000, K2_PCI32_BAR + SMBAR); /* Base@0xc0000000 */
__raw_writel(0x80000000, K2_PCI32_BAR + SIBAR); /* Base@0x80000000 */
__raw_writel(0x000000c0, K2_PCI32_BAR + PSSIZE); /* 1GB space */
__raw_writel(0x000000c0, K2_PCI32_BAR + PPSIZE); /* 1GB space */
__raw_writel(0x00000000, K2_PCI32_BAR + BARPS); /* Base@0x00000000 */
__raw_writel(0x00000000, K2_PCI32_BAR + BARPP); /* Base@0x00000000 */
__raw_writel(0x00000080, K2_PCI32_BAR + PSBAR); /* Base@0x80 */
__raw_writel(0x00000000, K2_PCI32_BAR + PPBAR);
__raw_writel(0xc0000000, K2_PCI32_BAR + BPMDLK);
__raw_writel(0xd0000000, K2_PCI32_BAR + TPMDLK);
__raw_writel(0x80000000, K2_PCI32_BAR + BIODLK);
__raw_writel(0x80100000, K2_PCI32_BAR + TIODLK);
__raw_writel(0xe0008000, K2_PCI32_BAR + DLKCTRL);
__raw_writel(0xffffffff, K2_PCI32_BAR + DLKDEV);
/* PCI64 mappings */
__raw_writel(0x00100000, K2_PCI64_BAR + PIBAR); /* PCI I/O base */
__raw_writel(0x10000000, K2_PCI64_BAR + PMBAR); /* PCI Mem base */
__raw_writel(0xf0000000, K2_PCI64_BAR + MSIZE); /* 256MB */
__raw_writel(0xfff00000, K2_PCI64_BAR + IOSIZE); /* 1MB */
__raw_writel(0xd0000000, K2_PCI64_BAR + SMBAR); /* Base@0xd0000000 */
__raw_writel(0x80100000, K2_PCI64_BAR + SIBAR); /* Base@0x80100000 */
__raw_writel(0x000000c0, K2_PCI64_BAR + PSSIZE); /* 1GB space */
__raw_writel(0x000000c0, K2_PCI64_BAR + PPSIZE); /* 1GB space */
__raw_writel(0x00000000, K2_PCI64_BAR + BARPS); /* Base@0x00000000 */
__raw_writel(0x00000000, K2_PCI64_BAR + BARPP); /* Base@0x00000000 */
/* Setup PCI32 hose */
hose_a = pcibios_alloc_controller();
if (!hose_a)
return;
hose_a->first_busno = 0;
hose_a->last_busno = 0xff;
hose_a->pci_mem_offset = K2_PCI32_MEM_BASE;
pci_init_resource(&hose_a->io_resource,
K2_PCI32_LOWER_IO,
K2_PCI32_UPPER_IO,
IORESOURCE_IO, "PCI32 host bridge");
pci_init_resource(&hose_a->mem_resources[0],
K2_PCI32_LOWER_MEM + K2_PCI32_MEM_BASE,
K2_PCI32_UPPER_MEM + K2_PCI32_MEM_BASE,
IORESOURCE_MEM, "PCI32 host bridge");
hose_a->io_space.start = K2_PCI32_LOWER_IO;
hose_a->io_space.end = K2_PCI32_UPPER_IO;
hose_a->mem_space.start = K2_PCI32_LOWER_MEM;
hose_a->mem_space.end = K2_PCI32_UPPER_MEM;
hose_a->io_base_virt = (void *)K2_ISA_IO_BASE;
setup_indirect_pci(hose_a, K2_PCI32_CONFIG_ADDR, K2_PCI32_CONFIG_DATA);
/* Initialize PCI32 bus registers */
early_write_config_byte(hose_a,
hose_a->first_busno,
PCI_DEVFN(0, 0),
CPC710_BUS_NUMBER, hose_a->first_busno);
early_write_config_byte(hose_a,
hose_a->first_busno,
PCI_DEVFN(0, 0),
CPC710_SUB_BUS_NUMBER, hose_a->last_busno);
/* Enable PCI interrupt polling */
early_write_config_byte(hose_a,
hose_a->first_busno,
PCI_DEVFN(8, 0), 0x45, 0x80);
/* Route polled PCI interrupts */
early_write_config_byte(hose_a,
hose_a->first_busno,
PCI_DEVFN(8, 0), 0x48, 0x58);
early_write_config_byte(hose_a,
hose_a->first_busno,
PCI_DEVFN(8, 0), 0x49, 0x07);
early_write_config_byte(hose_a,
hose_a->first_busno,
PCI_DEVFN(8, 0), 0x4a, 0x31);
early_write_config_byte(hose_a,
hose_a->first_busno,
PCI_DEVFN(8, 0), 0x4b, 0xb9);
/* route secondary IDE channel interrupt to IRQ 15 */
early_write_config_byte(hose_a,
hose_a->first_busno,
PCI_DEVFN(8, 0), 0x75, 0x0f);
/* enable IDE controller IDSEL */
early_write_config_byte(hose_a,
hose_a->first_busno,
PCI_DEVFN(8, 0), 0x58, 0x48);
/* Enable IDE function */
early_write_config_byte(hose_a,
hose_a->first_busno,
PCI_DEVFN(17, 0), 0x50, 0x03);
/* Set M5229 IDE controller to native mode */
early_write_config_byte(hose_a,
hose_a->first_busno,
PCI_DEVFN(17, 0), PCI_CLASS_PROG, 0xdf);
hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno);
/* Write out correct max subordinate bus number for hose A */
early_write_config_byte(hose_a,
hose_a->first_busno,
PCI_DEVFN(0, 0),
CPC710_SUB_BUS_NUMBER, hose_a->last_busno);
/* Only setup PCI64 hose if we are in the system slot */
if (!(readb(K2_MISC_REG) & K2_SYS_SLOT_MASK)) {
/* Setup PCI64 hose */
hose_b = pcibios_alloc_controller();
if (!hose_b)
return;
hose_b->first_busno = hose_a->last_busno + 1;
hose_b->last_busno = 0xff;
/* Reminder: quit changing the following, it is correct. */
hose_b->pci_mem_offset = K2_PCI32_MEM_BASE;
pci_init_resource(&hose_b->io_resource,
K2_PCI64_LOWER_IO,
K2_PCI64_UPPER_IO,
IORESOURCE_IO, "PCI64 host bridge");
pci_init_resource(&hose_b->mem_resources[0],
K2_PCI64_LOWER_MEM + K2_PCI32_MEM_BASE,
K2_PCI64_UPPER_MEM + K2_PCI32_MEM_BASE,
IORESOURCE_MEM, "PCI64 host bridge");
hose_b->io_space.start = K2_PCI64_LOWER_IO;
hose_b->io_space.end = K2_PCI64_UPPER_IO;
hose_b->mem_space.start = K2_PCI64_LOWER_MEM;
hose_b->mem_space.end = K2_PCI64_UPPER_MEM;
hose_b->io_base_virt = (void *)K2_ISA_IO_BASE;
setup_indirect_pci(hose_b,
K2_PCI64_CONFIG_ADDR, K2_PCI64_CONFIG_DATA);
/* Initialize PCI64 bus registers */
early_write_config_byte(hose_b,
0,
PCI_DEVFN(0, 0),
CPC710_SUB_BUS_NUMBER, 0xff);
early_write_config_byte(hose_b,
0,
PCI_DEVFN(0, 0),
CPC710_BUS_NUMBER, hose_b->first_busno);
hose_b->last_busno = pciauto_bus_scan(hose_b,
hose_b->first_busno);
/* Write out correct max subordinate bus number for hose B */
early_write_config_byte(hose_b,
hose_b->first_busno,
PCI_DEVFN(0, 0),
CPC710_SUB_BUS_NUMBER,
hose_b->last_busno);
/* Configure PCI64 PSBAR */
early_write_config_dword(hose_b,
hose_b->first_busno,
PCI_DEVFN(0, 0),
PCI_BASE_ADDRESS_0,
K2_PCI64_SYS_MEM_BASE);
}
/* Configure i8259 level/edge settings */
outb(0x62, 0x4d0);
outb(0xde, 0x4d1);
#ifdef CONFIG_CPC710_DATA_GATHERING
{
unsigned int tmp;
tmp = __raw_readl(ABCNTL);
/* Enable data gathering on both PCI interfaces */
__raw_writel(tmp | 0x05000000, ABCNTL);
}
#endif
ppc_md.pcibios_fixup = k2_pcibios_fixup;
ppc_md.pcibios_fixup_resources = k2_pcibios_fixup_resources;
ppc_md.pci_swizzle = common_swizzle;
ppc_md.pci_map_irq = k2_map_irq;
}
static int k2_get_bus_speed(void)
{
int bus_speed;
unsigned char board_id;
board_id = *(unsigned char *)K2_BOARD_ID_REG;
switch (K2_BUS_SPD(board_id)) {
case 0:
default:
bus_speed = 100000000;
break;
case 1:
bus_speed = 83333333;
break;
case 2:
bus_speed = 75000000;
break;
case 3:
bus_speed = 66666666;
break;
}
return bus_speed;
}
static int k2_get_cpu_speed(void)
{
unsigned long hid1;
int cpu_speed;
hid1 = mfspr(SPRN_HID1) >> 28;
if ((mfspr(SPRN_PVR) >> 16) == 8)
hid1 = cpu_7xx[hid1];
else
hid1 = cpu_6xx[hid1];
cpu_speed = k2_get_bus_speed() * hid1 / 2;
return cpu_speed;
}
static void __init k2_calibrate_decr(void)
{
int freq, divisor = 4;
/* determine processor bus speed */
freq = k2_get_bus_speed();
tb_ticks_per_jiffy = freq / HZ / divisor;
tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000);
}
static int k2_show_cpuinfo(struct seq_file *m)
{
unsigned char k2_geo_bits, k2_system_slot;
seq_printf(m, "vendor\t\t: SBS\n");
seq_printf(m, "machine\t\t: K2\n");
seq_printf(m, "cpu speed\t: %dMhz\n", k2_get_cpu_speed() / 1000000);
seq_printf(m, "bus speed\t: %dMhz\n", k2_get_bus_speed() / 1000000);
seq_printf(m, "memory type\t: SDRAM\n");
k2_geo_bits = readb(K2_MSIZ_GEO_REG) & K2_GEO_ADR_MASK;
k2_system_slot = !(readb(K2_MISC_REG) & K2_SYS_SLOT_MASK);
seq_printf(m, "backplane\t: %s slot board",
k2_system_slot ? "System" : "Non system");
seq_printf(m, "with geographical address %x\n", k2_geo_bits);
return 0;
}
TODC_ALLOC();
static void __init k2_setup_arch(void)
{
unsigned int cpu;
/* Setup TODC access */
TODC_INIT(TODC_TYPE_MK48T37, 0, 0,
ioremap(K2_RTC_BASE_ADDRESS, K2_RTC_SIZE), 8);
/* init to some ~sane value until calibrate_delay() runs */
loops_per_jiffy = 50000000 / HZ;
/* make FLASH transactions higher priority than PCI to avoid deadlock */
__raw_writel(__raw_readl(SIOC1) | 0x80000000, SIOC1);
/* Set hardware to access FLASH page 2 */
__raw_writel(1 << 29, GPOUT);
/* Setup PCI host bridges */
k2_setup_hoses();
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
ROOT_DEV = Root_RAM0;
else
#endif
#ifdef CONFIG_ROOT_NFS
ROOT_DEV = Root_NFS;
#else
ROOT_DEV = Root_HDC1;
#endif
/* Identify the system */
printk(KERN_INFO "System Identification: SBS K2 - PowerPC 750 @ "
"%d Mhz\n", k2_get_cpu_speed() / 1000000);
printk(KERN_INFO "Port by MontaVista Software, Inc. "
"(source@mvista.com)\n");
/* Identify the CPU manufacturer */
cpu = PVR_REV(mfspr(SPRN_PVR));
printk(KERN_INFO "CPU manufacturer: %s [rev=%04x]\n",
(cpu & (1 << 15)) ? "IBM" : "Motorola", cpu);
}
static void k2_restart(char *cmd)
{
local_irq_disable();
/* Flip FLASH back to page 1 to access firmware image */
__raw_writel(0, GPOUT);
/* SRR0 has system reset vector, SRR1 has default MSR value */
/* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */
mtspr(SPRN_SRR0, 0xfff00100);
mtspr(SPRN_SRR1, 0);
__asm__ __volatile__("rfi\n\t");
/* not reached */
for (;;) ;
}
static void k2_power_off(void)
{
for (;;) ;
}
static void k2_halt(void)
{
k2_restart(NULL);
}
/*
* Set BAT 3 to map PCI32 I/O space.
*/
static __inline__ void k2_set_bat(void)
{
/* wait for all outstanding memory accesses to complete */
mb();
/* setup DBATs */
mtspr(SPRN_DBAT2U, 0x80001ffe);
mtspr(SPRN_DBAT2L, 0x8000002a);
mtspr(SPRN_DBAT3U, 0xf0001ffe);
mtspr(SPRN_DBAT3L, 0xf000002a);
/* wait for updates */
mb();
}
static unsigned long __init k2_find_end_of_memory(void)
{
unsigned long total;
unsigned char msize = 7; /* Default to 128MB */
msize = K2_MEM_SIZE(readb(K2_MSIZ_GEO_REG));
switch (msize) {
case 2:
/*
* This will break without a lowered
* KERNELBASE or CONFIG_HIGHMEM on.
* It seems non 1GB builds exist yet,
* though.
*/
total = K2_MEM_SIZE_1GB;
break;
case 3:
case 4:
total = K2_MEM_SIZE_512MB;
break;
case 5:
case 6:
total = K2_MEM_SIZE_256MB;
break;
case 7:
total = K2_MEM_SIZE_128MB;
break;
default:
printk
("K2: Invalid memory size detected, defaulting to 128MB\n");
total = K2_MEM_SIZE_128MB;
break;
}
return total;
}
static void __init k2_map_io(void)
{
io_block_mapping(K2_PCI32_IO_BASE,
K2_PCI32_IO_BASE, 0x00200000, _PAGE_IO);
io_block_mapping(0xff000000, 0xff000000, 0x01000000, _PAGE_IO);
}
static void __init k2_init_irq(void)
{
int i;
for (i = 0; i < 16; i++)
irq_desc[i].handler = &i8259_pic;
i8259_init(0);
}
void __init platform_init(unsigned long r3, unsigned long r4,
unsigned long r5, unsigned long r6, unsigned long r7)
{
parse_bootinfo((struct bi_record *)(r3 + KERNELBASE));
k2_set_bat();
isa_io_base = K2_ISA_IO_BASE;
isa_mem_base = K2_ISA_MEM_BASE;
pci_dram_offset = K2_PCI32_SYS_MEM_BASE;
ppc_md.setup_arch = k2_setup_arch;
ppc_md.show_cpuinfo = k2_show_cpuinfo;
ppc_md.init_IRQ = k2_init_irq;
ppc_md.get_irq = i8259_irq;
ppc_md.find_end_of_memory = k2_find_end_of_memory;
ppc_md.setup_io_mappings = k2_map_io;
ppc_md.restart = k2_restart;
ppc_md.power_off = k2_power_off;
ppc_md.halt = k2_halt;
ppc_md.time_init = todc_time_init;
ppc_md.set_rtc_time = todc_set_rtc_time;
ppc_md.get_rtc_time = todc_get_rtc_time;
ppc_md.calibrate_decr = k2_calibrate_decr;
ppc_md.nvram_read_val = todc_direct_read_val;
ppc_md.nvram_write_val = todc_direct_write_val;
#ifdef CONFIG_SERIAL_TEXT_DEBUG
ppc_md.progress = gen550_progress;
#endif
}