android_kernel_xiaomi_sm8350/drivers/parisc
Yinghai Lu d5dedd4507 irq: change ->set_affinity() to return status
according to Ingo, change set_affinity() in irq_chip should return int,
because that way we can handle failure cases in a much cleaner way, in
the genirq layer.

v2: fix two typos

[ Impact: extend API ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: linux-arch@vger.kernel.org
LKML-Reference: <49F654E9.4070809@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 12:21:16 +02:00
..
asp.c
ccio-dma.c
ccio-rm-dma.c
dino.c
eisa_eeprom.c
eisa_enumerator.c
eisa.c
gsc.c
gsc.h
hppb.c
iommu-helpers.h
iosapic_private.h
iosapic.c irq: change ->set_affinity() to return status 2009-04-28 12:21:16 +02:00
Kconfig
lasi.c
lba_pci.c
led.c
Makefile
pdc_stable.c
power.c
README.dino
sba_iommu.c
superio.c
wax.c

/*
** HP VISUALIZE Workstation PCI Bus Defect
**
** "HP has discovered a potential system defect that can affect
** the behavior of five models of HP VISUALIZE workstations when
** equipped with third-party or customer-installed PCI I/O expansion
** cards. The defect is limited to the HP C180, C160, C160L, B160L,
** and B132L VISUALIZE workstations, and will only be encountered
** when data is transmitted through PCI I/O expansion cards on the
** PCI bus. HP-supplied graphics cards that utilize the PCI bus are
** not affected."
**
** REVISIT: "go/pci_defect" link below is stale.
**	HP Internal can use <http://hpfcdma.fc.hp.com:80/Dino/>
**
**	Product		First Good Serial Number
**  C200/C240 (US)	US67350000
**B132L+/B180 (US)	US67390000
**   C200 (Europe)	3713G01000
**  B180L (Europe)	3720G01000
**
** Note that many boards were fixed/replaced under a free replacement
** program. Assume a machine is only "suspect" until proven otherwise.
**
** "The pci_check program will also be available as application
**  patch PHSS_12295"
*/