f3d9478b2c
This large patch adds all of snd-aoa. Consisting of many modules, it currently replaces snd-powermac for all layout-id based machines and handles many more (for example new powerbooks and powermacs with digital output that previously couldn't be used at all). It also has support for all layout-IDs that Apple has (judging from their Info.plist file) but not all are tested. The driver currently has 2 known regressions over snd-powermac: * it doesn't handle powermac 7,2 and 7,3 * it doesn't have a DRC control on snapper-based machines I will fix those during the 2.6.18 development cycle. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
188 lines
6.4 KiB
C
188 lines
6.4 KiB
C
/*
|
|
* i2sbus driver -- interface register definitions
|
|
*
|
|
* Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
|
|
*
|
|
* GPL v2, can be found in COPYING.
|
|
*/
|
|
#ifndef __I2SBUS_INTERFACE_H
|
|
#define __I2SBUS_INTERFACE_H
|
|
|
|
/* i2s bus control registers, at least what we know about them */
|
|
|
|
#define __PAD(m,n) u8 __pad##m[n]
|
|
#define _PAD(line, n) __PAD(line, n)
|
|
#define PAD(n) _PAD(__LINE__, (n))
|
|
struct i2s_interface_regs {
|
|
__le32 intr_ctl; /* 0x00 */
|
|
PAD(12);
|
|
__le32 serial_format; /* 0x10 */
|
|
PAD(12);
|
|
__le32 codec_msg_out; /* 0x20 */
|
|
PAD(12);
|
|
__le32 codec_msg_in; /* 0x30 */
|
|
PAD(12);
|
|
__le32 frame_count; /* 0x40 */
|
|
PAD(12);
|
|
__le32 frame_match; /* 0x50 */
|
|
PAD(12);
|
|
__le32 data_word_sizes; /* 0x60 */
|
|
PAD(12);
|
|
__le32 peak_level_sel; /* 0x70 */
|
|
PAD(12);
|
|
__le32 peak_level_in0; /* 0x80 */
|
|
PAD(12);
|
|
__le32 peak_level_in1; /* 0x90 */
|
|
PAD(12);
|
|
/* total size: 0x100 bytes */
|
|
} __attribute__((__packed__));
|
|
|
|
/* interrupt register is just a bitfield with
|
|
* interrupt enable and pending bits */
|
|
#define I2S_REG_INTR_CTL 0x00
|
|
# define I2S_INT_FRAME_COUNT (1<<31)
|
|
# define I2S_PENDING_FRAME_COUNT (1<<30)
|
|
# define I2S_INT_MESSAGE_FLAG (1<<29)
|
|
# define I2S_PENDING_MESSAGE_FLAG (1<<28)
|
|
# define I2S_INT_NEW_PEAK (1<<27)
|
|
# define I2S_PENDING_NEW_PEAK (1<<26)
|
|
# define I2S_INT_CLOCKS_STOPPED (1<<25)
|
|
# define I2S_PENDING_CLOCKS_STOPPED (1<<24)
|
|
# define I2S_INT_EXTERNAL_SYNC_ERROR (1<<23)
|
|
# define I2S_PENDING_EXTERNAL_SYNC_ERROR (1<<22)
|
|
# define I2S_INT_EXTERNAL_SYNC_OK (1<<21)
|
|
# define I2S_PENDING_EXTERNAL_SYNC_OK (1<<20)
|
|
# define I2S_INT_NEW_SAMPLE_RATE (1<<19)
|
|
# define I2S_PENDING_NEW_SAMPLE_RATE (1<<18)
|
|
# define I2S_INT_STATUS_FLAG (1<<17)
|
|
# define I2S_PENDING_STATUS_FLAG (1<<16)
|
|
|
|
/* serial format register is more interesting :)
|
|
* It contains:
|
|
* - clock source
|
|
* - MClk divisor
|
|
* - SClk divisor
|
|
* - SClk master flag
|
|
* - serial format (sony, i2s 64x, i2s 32x, dav, silabs)
|
|
* - external sample frequency interrupt (don't understand)
|
|
* - external sample frequency
|
|
*/
|
|
#define I2S_REG_SERIAL_FORMAT 0x10
|
|
/* clock source. You get either 18.432, 45.1584 or 49.1520 MHz */
|
|
# define I2S_SF_CLOCK_SOURCE_SHIFT 30
|
|
# define I2S_SF_CLOCK_SOURCE_MASK (3<<I2S_SF_CLOCK_SOURCE_SHIFT)
|
|
# define I2S_SF_CLOCK_SOURCE_18MHz (0<<I2S_SF_CLOCK_SOURCE_SHIFT)
|
|
# define I2S_SF_CLOCK_SOURCE_45MHz (1<<I2S_SF_CLOCK_SOURCE_SHIFT)
|
|
# define I2S_SF_CLOCK_SOURCE_49MHz (2<<I2S_SF_CLOCK_SOURCE_SHIFT)
|
|
/* also, let's define the exact clock speeds here, in Hz */
|
|
#define I2S_CLOCK_SPEED_18MHz 18432000
|
|
#define I2S_CLOCK_SPEED_45MHz 45158400
|
|
#define I2S_CLOCK_SPEED_49MHz 49152000
|
|
/* MClk is the clock that drives the codec, usually called its 'system clock'.
|
|
* It is derived by taking only every 'divisor' tick of the clock.
|
|
*/
|
|
# define I2S_SF_MCLKDIV_SHIFT 24
|
|
# define I2S_SF_MCLKDIV_MASK (0x1F<<I2S_SF_MCLKDIV_SHIFT)
|
|
# define I2S_SF_MCLKDIV_1 (0x14<<I2S_SF_MCLKDIV_SHIFT)
|
|
# define I2S_SF_MCLKDIV_3 (0x13<<I2S_SF_MCLKDIV_SHIFT)
|
|
# define I2S_SF_MCLKDIV_5 (0x12<<I2S_SF_MCLKDIV_SHIFT)
|
|
# define I2S_SF_MCLKDIV_14 (0x0E<<I2S_SF_MCLKDIV_SHIFT)
|
|
# define I2S_SF_MCLKDIV_OTHER(div) (((div/2-1)<<I2S_SF_MCLKDIV_SHIFT)&I2S_SF_MCLKDIV_MASK)
|
|
static inline int i2s_sf_mclkdiv(int div, int *out)
|
|
{
|
|
int d;
|
|
|
|
switch(div) {
|
|
case 1: *out |= I2S_SF_MCLKDIV_1; return 0;
|
|
case 3: *out |= I2S_SF_MCLKDIV_3; return 0;
|
|
case 5: *out |= I2S_SF_MCLKDIV_5; return 0;
|
|
case 14: *out |= I2S_SF_MCLKDIV_14; return 0;
|
|
default:
|
|
if (div%2) return -1;
|
|
d = div/2-1;
|
|
if (d == 0x14 || d == 0x13 || d == 0x12 || d == 0x0E)
|
|
return -1;
|
|
*out |= I2S_SF_MCLKDIV_OTHER(div);
|
|
return 0;
|
|
}
|
|
}
|
|
/* SClk is the clock that drives the i2s wire bus. Note that it is
|
|
* derived from the MClk above by taking only every 'divisor' tick
|
|
* of MClk.
|
|
*/
|
|
# define I2S_SF_SCLKDIV_SHIFT 20
|
|
# define I2S_SF_SCLKDIV_MASK (0xF<<I2S_SF_SCLKDIV_SHIFT)
|
|
# define I2S_SF_SCLKDIV_1 (8<<I2S_SF_SCLKDIV_SHIFT)
|
|
# define I2S_SF_SCLKDIV_3 (9<<I2S_SF_SCLKDIV_SHIFT)
|
|
# define I2S_SF_SCLKDIV_OTHER(div) (((div/2-1)<<I2S_SF_SCLKDIV_SHIFT)&I2S_SF_SCLKDIV_MASK)
|
|
static inline int i2s_sf_sclkdiv(int div, int *out)
|
|
{
|
|
int d;
|
|
|
|
switch(div) {
|
|
case 1: *out |= I2S_SF_SCLKDIV_1; return 0;
|
|
case 3: *out |= I2S_SF_SCLKDIV_3; return 0;
|
|
default:
|
|
if (div%2) return -1;
|
|
d = div/2-1;
|
|
if (d == 8 || d == 9) return -1;
|
|
*out |= I2S_SF_SCLKDIV_OTHER(div);
|
|
return 0;
|
|
}
|
|
}
|
|
# define I2S_SF_SCLK_MASTER (1<<19)
|
|
/* serial format is the way the data is put to the i2s wire bus */
|
|
# define I2S_SF_SERIAL_FORMAT_SHIFT 16
|
|
# define I2S_SF_SERIAL_FORMAT_MASK (7<<I2S_SF_SERIAL_FORMAT_SHIFT)
|
|
# define I2S_SF_SERIAL_FORMAT_SONY (0<<I2S_SF_SERIAL_FORMAT_SHIFT)
|
|
# define I2S_SF_SERIAL_FORMAT_I2S_64X (1<<I2S_SF_SERIAL_FORMAT_SHIFT)
|
|
# define I2S_SF_SERIAL_FORMAT_I2S_32X (2<<I2S_SF_SERIAL_FORMAT_SHIFT)
|
|
# define I2S_SF_SERIAL_FORMAT_I2S_DAV (4<<I2S_SF_SERIAL_FORMAT_SHIFT)
|
|
# define I2S_SF_SERIAL_FORMAT_I2S_SILABS (5<<I2S_SF_SERIAL_FORMAT_SHIFT)
|
|
/* unknown */
|
|
# define I2S_SF_EXT_SAMPLE_FREQ_INT_SHIFT 12
|
|
# define I2S_SF_EXT_SAMPLE_FREQ_INT_MASK (0xF<<I2S_SF_SAMPLE_FREQ_INT_SHIFT)
|
|
/* probably gives external frequency? */
|
|
# define I2S_SF_EXT_SAMPLE_FREQ_MASK 0xFFF
|
|
|
|
/* used to send codec messages, but how isn't clear */
|
|
#define I2S_REG_CODEC_MSG_OUT 0x20
|
|
|
|
/* used to receive codec messages, but how isn't clear */
|
|
#define I2S_REG_CODEC_MSG_IN 0x30
|
|
|
|
/* frame count reg isn't clear to me yet, but probably useful */
|
|
#define I2S_REG_FRAME_COUNT 0x40
|
|
|
|
/* program to some value, and get interrupt if frame count reaches it */
|
|
#define I2S_REG_FRAME_MATCH 0x50
|
|
|
|
/* this register describes how the bus transfers data */
|
|
#define I2S_REG_DATA_WORD_SIZES 0x60
|
|
/* number of interleaved input channels */
|
|
# define I2S_DWS_NUM_CHANNELS_IN_SHIFT 24
|
|
# define I2S_DWS_NUM_CHANNELS_IN_MASK (0x1F<<I2S_DWS_NUM_CHANNELS_IN_SHIFT)
|
|
/* word size of input data */
|
|
# define I2S_DWS_DATA_IN_SIZE_SHIFT 16
|
|
# define I2S_DWS_DATA_IN_16BIT (0<<I2S_DWS_DATA_IN_SIZE_SHIFT)
|
|
# define I2S_DWS_DATA_IN_24BIT (3<<I2S_DWS_DATA_IN_SIZE_SHIFT)
|
|
/* number of interleaved output channels */
|
|
# define I2S_DWS_NUM_CHANNELS_OUT_SHIFT 8
|
|
# define I2S_DWS_NUM_CHANNELS_OUT_MASK (0x1F<<I2S_DWS_NUM_CHANNELS_OUT_SHIFT)
|
|
/* word size of output data */
|
|
# define I2S_DWS_DATA_OUT_SIZE_SHIFT 0
|
|
# define I2S_DWS_DATA_OUT_16BIT (0<<I2S_DWS_DATA_OUT_SIZE_SHIFT)
|
|
# define I2S_DWS_DATA_OUT_24BIT (3<<I2S_DWS_DATA_OUT_SIZE_SHIFT)
|
|
|
|
|
|
/* unknown */
|
|
#define I2S_REG_PEAK_LEVEL_SEL 0x70
|
|
|
|
/* unknown */
|
|
#define I2S_REG_PEAK_LEVEL_IN0 0x80
|
|
|
|
/* unknown */
|
|
#define I2S_REG_PEAK_LEVEL_IN1 0x90
|
|
|
|
#endif /* __I2SBUS_INTERFACE_H */
|