android_kernel_xiaomi_sm8350/arch/ppc/syslib/m82xx_pci.c
Vitaly Bordug a6dbba77a9 [PATCH] ppc32: Support for 82xx PQII on-chip PCI bridge
This patch adds on-chip PCI bridge support for the PQ2 family.  The
incomplete existent code is updated with interrupt handling stuff and
board-specific bits for 8272ADS and PQ2FADS; the related files were renamed
(from m8260_pci to m82xx_pci) to be of more generic fashion.  This is
tested with 8266ADS and 8272ADS, should work on PQ2FADS as well.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-28 16:46:15 -07:00

384 lines
11 KiB
C

/*
*
* (C) Copyright 2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2004 Red Hat, Inc.
*
* 2005 (c) MontaVista Software, Inc.
* Vitaly Bordug <vbordug@ru.mvista.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <asm/byteorder.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/immap_cpm2.h>
#include <asm/mpc8260.h>
#include <asm/cpm2.h>
#include "m82xx_pci.h"
/*
* Interrupt routing
*/
static inline int
pq2pci_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
{
static char pci_irq_table[][4] =
/*
* PCI IDSEL/INTPIN->INTLINE
* A B C D
*/
{
{ PIRQA, PIRQB, PIRQC, PIRQD }, /* IDSEL 22 - PCI slot 0 */
{ PIRQD, PIRQA, PIRQB, PIRQC }, /* IDSEL 23 - PCI slot 1 */
{ PIRQC, PIRQD, PIRQA, PIRQB }, /* IDSEL 24 - PCI slot 2 */
};
const long min_idsel = 22, max_idsel = 24, irqs_per_slot = 4;
return PCI_IRQ_TABLE_LOOKUP;
}
static void
pq2pci_mask_irq(unsigned int irq)
{
int bit = irq - NR_CPM_INTS;
*(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit));
return;
}
static void
pq2pci_unmask_irq(unsigned int irq)
{
int bit = irq - NR_CPM_INTS;
*(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit));
return;
}
static void
pq2pci_mask_and_ack(unsigned int irq)
{
int bit = irq - NR_CPM_INTS;
*(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit));
return;
}
static void
pq2pci_end_irq(unsigned int irq)
{
int bit = irq - NR_CPM_INTS;
*(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit));
return;
}
struct hw_interrupt_type pq2pci_ic = {
"PQ2 PCI",
NULL,
NULL,
pq2pci_unmask_irq,
pq2pci_mask_irq,
pq2pci_mask_and_ack,
pq2pci_end_irq,
0
};
static irqreturn_t
pq2pci_irq_demux(int irq, void *dev_id, struct pt_regs *regs)
{
unsigned long stat, mask, pend;
int bit;
for(;;) {
stat = *(volatile unsigned long *) PCI_INT_STAT_REG;
mask = *(volatile unsigned long *) PCI_INT_MASK_REG;
pend = stat & ~mask & 0xf0000000;
if (!pend)
break;
for (bit = 0; pend != 0; ++bit, pend <<= 1) {
if (pend & 0x80000000)
__do_IRQ(NR_CPM_INTS + bit, regs);
}
}
return IRQ_HANDLED;
}
static struct irqaction pq2pci_irqaction = {
.handler = pq2pci_irq_demux,
.flags = SA_INTERRUPT,
.mask = CPU_MASK_NONE,
.name = "PQ2 PCI cascade",
};
void
pq2pci_init_irq(void)
{
int irq;
volatile cpm2_map_t *immap = cpm2_immr;
#if defined CONFIG_ADS8272
/* configure chip select for PCI interrupt controller */
immap->im_memctl.memc_br3 = PCI_INT_STAT_REG | 0x00001801;
immap->im_memctl.memc_or3 = 0xffff8010;
#elif defined CONFIG_PQ2FADS
immap->im_memctl.memc_br8 = PCI_INT_STAT_REG | 0x00001801;
immap->im_memctl.memc_or8 = 0xffff8010;
#endif
for (irq = NR_CPM_INTS; irq < NR_CPM_INTS + 4; irq++)
irq_desc[irq].handler = &pq2pci_ic;
/* make PCI IRQ level sensitive */
immap->im_intctl.ic_siexr &=
~(1 << (14 - (PCI_INT_TO_SIU - SIU_INT_IRQ1)));
/* mask all PCI interrupts */
*(volatile unsigned long *) PCI_INT_MASK_REG |= 0xfff00000;
/* install the demultiplexer for the PCI cascade interrupt */
setup_irq(PCI_INT_TO_SIU, &pq2pci_irqaction);
return;
}
static int
pq2pci_exclude_device(u_char bus, u_char devfn)
{
return PCIBIOS_SUCCESSFUL;
}
/* PCI bus configuration registers.
*/
static void
pq2ads_setup_pci(struct pci_controller *hose)
{
__u32 val;
volatile cpm2_map_t *immap = cpm2_immr;
bd_t* binfo = (bd_t*) __res;
u32 sccr = immap->im_clkrst.car_sccr;
uint pci_div,freq,time;
/* PCI int lowest prio */
/* Each 4 bits is a device bus request and the MS 4bits
is highest priority */
/* Bus 4bit value
--- ----------
CPM high 0b0000
CPM middle 0b0001
CPM low 0b0010
PCI reguest 0b0011
Reserved 0b0100
Reserved 0b0101
Internal Core 0b0110
External Master 1 0b0111
External Master 2 0b1000
External Master 3 0b1001
The rest are reserved
*/
immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893;
/* park bus on core */
immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_CORE;
/*
* Set up master windows that allow the CPU to access PCI space. These
* windows are set up using the two SIU PCIBR registers.
*/
immap->im_memctl.memc_pcimsk0 = M82xx_PCI_PRIM_WND_SIZE;
immap->im_memctl.memc_pcibr0 = M82xx_PCI_PRIM_WND_BASE | PCIBR_ENABLE;
#ifdef M82xx_PCI_SEC_WND_SIZE
immap->im_memctl.memc_pcimsk1 = M82xx_PCI_SEC_WND_SIZE;
immap->im_memctl.memc_pcibr1 = M82xx_PCI_SEC_WND_BASE | PCIBR_ENABLE;
#endif
#if defined CONFIG_ADS8272
immap->im_siu_conf.siu_82xx.sc_siumcr =
(immap->im_siu_conf.siu_82xx.sc_siumcr &
~(SIUMCR_BBD | SIUMCR_ESE | SIUMCR_PBSE |
SIUMCR_CDIS | SIUMCR_DPPC11 | SIUMCR_L2CPC11 |
SIUMCR_LBPC11 | SIUMCR_APPC11 |
SIUMCR_CS10PC11 | SIUMCR_BCTLC11 | SIUMCR_MMR11)) |
SIUMCR_DPPC11 | SIUMCR_L2CPC01 | SIUMCR_LBPC00 |
SIUMCR_APPC10 | SIUMCR_CS10PC00 |
SIUMCR_BCTLC00 | SIUMCR_MMR11 ;
#elif defined CONFIG_PQ2FADS
/*
* Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
* and local bus for PCI (SIUMCR [LBPC]).
*/
immap->im_siu_conf.siu_82xx.sc_siumcr = (immap->im_siu_conf.sc_siumcr &
~(SIUMCR_L2PC11 | SIUMCR_LBPC11 | SIUMCR_CS10PC11 | SIUMCR_APPC11) |
SIUMCR_BBD | SIUMCR_LBPC01 | SIUMCR_DPPC11 | SIUMCR_APPC10;
#endif
/* Enable PCI */
immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN);
pci_div = ( (sccr & SCCR_PCI_MODCK) ? 2 : 1) *
( ( (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT) + 1);
freq = (uint)((2*binfo->bi_cpmfreq)/(pci_div));
time = (int)666666/freq;
/* due to PCI Local Bus spec, some devices needs to wait such a long
time after RST deassertion. More specifically, 0.508s for 66MHz & twice more for 33 */
printk("%s: The PCI bus is %d Mhz.\nWaiting %s after deasserting RST...\n",__FILE__,freq,
(time==1) ? "0.5 seconds":"1 second" );
{
int i;
for(i=0;i<(500*time);i++)
udelay(1000);
}
/* setup ATU registers */
immap->im_pci.pci_pocmr0 = cpu_to_le32(POCMR_ENABLE | POCMR_PCI_IO |
((~(M82xx_PCI_IO_SIZE - 1U)) >> POTA_ADDR_SHIFT));
immap->im_pci.pci_potar0 = cpu_to_le32(M82xx_PCI_LOWER_IO >> POTA_ADDR_SHIFT);
immap->im_pci.pci_pobar0 = cpu_to_le32(M82xx_PCI_IO_BASE >> POTA_ADDR_SHIFT);
/* Set-up non-prefetchable window */
immap->im_pci.pci_pocmr1 = cpu_to_le32(POCMR_ENABLE | ((~(M82xx_PCI_MMIO_SIZE-1U)) >> POTA_ADDR_SHIFT));
immap->im_pci.pci_potar1 = cpu_to_le32(M82xx_PCI_LOWER_MMIO >> POTA_ADDR_SHIFT);
immap->im_pci.pci_pobar1 = cpu_to_le32((M82xx_PCI_LOWER_MMIO - M82xx_PCI_MMIO_OFFSET) >> POTA_ADDR_SHIFT);
/* Set-up prefetchable window */
immap->im_pci.pci_pocmr2 = cpu_to_le32(POCMR_ENABLE |POCMR_PREFETCH_EN |
(~(M82xx_PCI_MEM_SIZE-1U) >> POTA_ADDR_SHIFT));
immap->im_pci.pci_potar2 = cpu_to_le32(M82xx_PCI_LOWER_MEM >> POTA_ADDR_SHIFT);
immap->im_pci.pci_pobar2 = cpu_to_le32((M82xx_PCI_LOWER_MEM - M82xx_PCI_MEM_OFFSET) >> POTA_ADDR_SHIFT);
/* Inbound transactions from PCI memory space */
immap->im_pci.pci_picmr0 = cpu_to_le32(PICMR_ENABLE | PICMR_PREFETCH_EN |
((~(M82xx_PCI_SLAVE_MEM_SIZE-1U)) >> PITA_ADDR_SHIFT));
immap->im_pci.pci_pibar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_BUS >> PITA_ADDR_SHIFT);
immap->im_pci.pci_pitar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_LOCAL>> PITA_ADDR_SHIFT);
#if defined CONFIG_ADS8272
/* PCI int highest prio */
immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x01236745;
#elif defined CONFIG_PQ2FADS
immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x03124567;
#endif
/* park bus on PCI */
immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
/* Enable bus mastering and inbound memory transactions */
early_read_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, &val);
val &= 0xffff0000;
val |= PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER;
early_write_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, val);
}
void __init pq2_find_bridges(void)
{
extern int pci_assign_all_busses;
struct pci_controller * hose;
int host_bridge;
pci_assign_all_busses = 1;
hose = pcibios_alloc_controller();
if (!hose)
return;
ppc_md.pci_swizzle = common_swizzle;
hose->first_busno = 0;
hose->bus_offset = 0;
hose->last_busno = 0xff;
#ifdef CONFIG_ADS8272
hose->set_cfg_type = 1;
#endif
setup_m8260_indirect_pci(hose,
(unsigned long)&cpm2_immr->im_pci.pci_cfg_addr,
(unsigned long)&cpm2_immr->im_pci.pci_cfg_data);
/* Make sure it is a supported bridge */
early_read_config_dword(hose,
0,
PCI_DEVFN(0,0),
PCI_VENDOR_ID,
&host_bridge);
switch (host_bridge) {
case PCI_DEVICE_ID_MPC8265:
break;
case PCI_DEVICE_ID_MPC8272:
break;
default:
printk("Attempting to use unrecognized host bridge ID"
" 0x%08x.\n", host_bridge);
break;
}
pq2ads_setup_pci(hose);
hose->io_space.start = M82xx_PCI_LOWER_IO;
hose->io_space.end = M82xx_PCI_UPPER_IO;
hose->mem_space.start = M82xx_PCI_LOWER_MEM;
hose->mem_space.end = M82xx_PCI_UPPER_MMIO;
hose->pci_mem_offset = M82xx_PCI_MEM_OFFSET;
isa_io_base =
(unsigned long) ioremap(M82xx_PCI_IO_BASE,
M82xx_PCI_IO_SIZE);
hose->io_base_virt = (void *) isa_io_base;
/* setup resources */
pci_init_resource(&hose->mem_resources[0],
M82xx_PCI_LOWER_MEM,
M82xx_PCI_UPPER_MEM,
IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory");
pci_init_resource(&hose->mem_resources[1],
M82xx_PCI_LOWER_MMIO,
M82xx_PCI_UPPER_MMIO,
IORESOURCE_MEM, "PCI memory");
pci_init_resource(&hose->io_resource,
M82xx_PCI_LOWER_IO,
M82xx_PCI_UPPER_IO,
IORESOURCE_IO | 1, "PCI I/O");
ppc_md.pci_exclude_device = pq2pci_exclude_device;
hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
ppc_md.pci_map_irq = pq2pci_map_irq;
ppc_md.pcibios_fixup = NULL;
ppc_md.pcibios_fixup_bus = NULL;
}