android_kernel_xiaomi_sm8350/arch/arm/mach-pxa/Makefile
eric miao 75540c1ac3 [ARM] pxa: Add PXA support for PWM API
Patch mainly from Eric Miao, with minor edits by rmk.

Note: PWM0 and PWM2 share the same register I/O space and clock gating
on pxa{27x, 3xx}, thus PWM2 is treated in the driver as a child PWM of
PWM0. And this is also true for PWM1/3.

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-19 16:25:39 +01:00

62 lines
2.0 KiB
Makefile

#
# Makefile for the linux kernel.
#
# Common support (must be linked before board specific support)
obj-y += clock.o devices.o generic.o irq.o dma.o \
time.o gpio.o
obj-$(CONFIG_PM) += pm.o sleep.o standby.o
obj-$(CONFIG_CPU_FREQ) += cpu-pxa.o
# Generic drivers that other drivers may depend upon
obj-$(CONFIG_PXA_SSP) += ssp.o
obj-$(CONFIG_PXA_PWM) += pwm.o
# SoC-specific code
obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa25x.o
obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o pxa27x.o
obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o
obj-$(CONFIG_CPU_PXA300) += pxa300.o
obj-$(CONFIG_CPU_PXA320) += pxa320.o
# Specific board support
obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o
obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
obj-$(CONFIG_MACH_COLIBRI) += colibri.o
obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o
obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o
obj-$(CONFIG_MACH_AKITA) += akita-ioexp.o
obj-$(CONFIG_MACH_POODLE) += poodle.o corgi_ssp.o
obj-$(CONFIG_MACH_PCM027) += pcm027.o
obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
obj-$(CONFIG_MACH_TOSA) += tosa.o
obj-$(CONFIG_MACH_EM_X270) += em-x270.o
obj-$(CONFIG_MACH_MAGICIAN) += magician.o
obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o
ifeq ($(CONFIG_MACH_ZYLONITE),y)
obj-y += zylonite.o
obj-$(CONFIG_CPU_PXA300) += zylonite_pxa300.o
obj-$(CONFIG_CPU_PXA320) += zylonite_pxa320.o
endif
obj-$(CONFIG_MACH_LITTLETON) += littleton.o
obj-$(CONFIG_MACH_ARMCORE) += cm-x270.o
# Support for blinky lights
led-y := leds.o
led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o
led-$(CONFIG_MACH_MAINSTONE) += leds-mainstone.o
led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o
led-$(CONFIG_MACH_TRIZEPS4) += leds-trizeps4.o
obj-$(CONFIG_LEDS) += $(led-y)
ifeq ($(CONFIG_PCI),y)
obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o
endif