4c8d3d997e
Changed jobs and the Freescale address is no longer valid. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
371 lines
10 KiB
C
371 lines
10 KiB
C
/*
|
|
* arch/ppc/syslib/ppc85xx_setup.c
|
|
*
|
|
* MPC85XX common board code
|
|
*
|
|
* Maintainer: Kumar Gala <galak@kernel.crashing.org>
|
|
*
|
|
* Copyright 2004 Freescale Semiconductor Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/types.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/tty.h> /* for linux/serial_core.h */
|
|
#include <linux/serial_core.h>
|
|
#include <linux/serial_8250.h>
|
|
|
|
#include <asm/time.h>
|
|
#include <asm/mpc85xx.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/ppc_sys.h>
|
|
#include <asm/kgdb.h>
|
|
#include <asm/machdep.h>
|
|
|
|
#include <syslib/ppc85xx_setup.h>
|
|
|
|
extern void abort(void);
|
|
|
|
/* Return the amount of memory */
|
|
unsigned long __init
|
|
mpc85xx_find_end_of_memory(void)
|
|
{
|
|
bd_t *binfo;
|
|
|
|
binfo = (bd_t *) __res;
|
|
|
|
return binfo->bi_memsize;
|
|
}
|
|
|
|
/* The decrementer counts at the system (internal) clock freq divided by 8 */
|
|
void __init
|
|
mpc85xx_calibrate_decr(void)
|
|
{
|
|
bd_t *binfo = (bd_t *) __res;
|
|
unsigned int freq, divisor;
|
|
|
|
/* get the core frequency */
|
|
freq = binfo->bi_busfreq;
|
|
|
|
/* The timebase is updated every 8 bus clocks, HID0[SEL_TBCLK] = 0 */
|
|
divisor = 8;
|
|
tb_ticks_per_jiffy = freq / divisor / HZ;
|
|
tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000);
|
|
|
|
/* Set the time base to zero */
|
|
mtspr(SPRN_TBWL, 0);
|
|
mtspr(SPRN_TBWU, 0);
|
|
|
|
/* Clear any pending timer interrupts */
|
|
mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
|
|
|
|
/* Enable decrementer interrupt */
|
|
mtspr(SPRN_TCR, TCR_DIE);
|
|
}
|
|
|
|
#ifdef CONFIG_SERIAL_8250
|
|
void __init
|
|
mpc85xx_early_serial_map(void)
|
|
{
|
|
#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
|
|
struct uart_port serial_req;
|
|
#endif
|
|
struct plat_serial8250_port *pdata;
|
|
bd_t *binfo = (bd_t *) __res;
|
|
pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(MPC85xx_DUART);
|
|
|
|
/* Setup serial port access */
|
|
pdata[0].uartclk = binfo->bi_busfreq;
|
|
pdata[0].mapbase += binfo->bi_immr_base;
|
|
pdata[0].membase = ioremap(pdata[0].mapbase, MPC85xx_UART0_SIZE);
|
|
|
|
#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
|
|
memset(&serial_req, 0, sizeof (serial_req));
|
|
serial_req.iotype = SERIAL_IO_MEM;
|
|
serial_req.mapbase = pdata[0].mapbase;
|
|
serial_req.membase = pdata[0].membase;
|
|
serial_req.regshift = 0;
|
|
|
|
gen550_init(0, &serial_req);
|
|
#endif
|
|
|
|
pdata[1].uartclk = binfo->bi_busfreq;
|
|
pdata[1].mapbase += binfo->bi_immr_base;
|
|
pdata[1].membase = ioremap(pdata[1].mapbase, MPC85xx_UART0_SIZE);
|
|
|
|
#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
|
|
/* Assume gen550_init() doesn't modify serial_req */
|
|
serial_req.mapbase = pdata[1].mapbase;
|
|
serial_req.membase = pdata[1].membase;
|
|
|
|
gen550_init(1, &serial_req);
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
void
|
|
mpc85xx_restart(char *cmd)
|
|
{
|
|
local_irq_disable();
|
|
abort();
|
|
}
|
|
|
|
void
|
|
mpc85xx_power_off(void)
|
|
{
|
|
local_irq_disable();
|
|
for(;;);
|
|
}
|
|
|
|
void
|
|
mpc85xx_halt(void)
|
|
{
|
|
local_irq_disable();
|
|
for(;;);
|
|
}
|
|
|
|
#ifdef CONFIG_PCI
|
|
|
|
#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS)
|
|
extern void mpc85xx_cds_enable_via(struct pci_controller *hose);
|
|
extern void mpc85xx_cds_fixup_via(struct pci_controller *hose);
|
|
#endif
|
|
|
|
static void __init
|
|
mpc85xx_setup_pci1(struct pci_controller *hose)
|
|
{
|
|
volatile struct ccsr_pci *pci;
|
|
volatile struct ccsr_guts *guts;
|
|
unsigned short temps;
|
|
bd_t *binfo = (bd_t *) __res;
|
|
|
|
pci = ioremap(binfo->bi_immr_base + MPC85xx_PCI1_OFFSET,
|
|
MPC85xx_PCI1_SIZE);
|
|
|
|
guts = ioremap(binfo->bi_immr_base + MPC85xx_GUTS_OFFSET,
|
|
MPC85xx_GUTS_SIZE);
|
|
|
|
early_read_config_word(hose, 0, 0, PCI_COMMAND, &temps);
|
|
temps |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
|
|
early_write_config_word(hose, 0, 0, PCI_COMMAND, temps);
|
|
|
|
#define PORDEVSR_PCI (0x00800000) /* PCI Mode */
|
|
if (guts->pordevsr & PORDEVSR_PCI) {
|
|
early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80);
|
|
} else {
|
|
/* PCI-X init */
|
|
temps = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
|
|
| PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
|
|
early_write_config_word(hose, 0, 0, PCIX_COMMAND, temps);
|
|
}
|
|
|
|
/* Disable all windows (except powar0 since its ignored) */
|
|
pci->powar1 = 0;
|
|
pci->powar2 = 0;
|
|
pci->powar3 = 0;
|
|
pci->powar4 = 0;
|
|
pci->piwar1 = 0;
|
|
pci->piwar2 = 0;
|
|
pci->piwar3 = 0;
|
|
|
|
/* Setup Phys:PCI 1:1 outbound mem window @ MPC85XX_PCI1_LOWER_MEM */
|
|
pci->potar1 = (MPC85XX_PCI1_LOWER_MEM >> 12) & 0x000fffff;
|
|
pci->potear1 = 0x00000000;
|
|
pci->powbar1 = (MPC85XX_PCI1_LOWER_MEM >> 12) & 0x000fffff;
|
|
/* Enable, Mem R/W */
|
|
pci->powar1 = 0x80044000 |
|
|
(__ilog2(MPC85XX_PCI1_UPPER_MEM - MPC85XX_PCI1_LOWER_MEM + 1) - 1);
|
|
|
|
/* Setup outbound IO windows @ MPC85XX_PCI1_IO_BASE */
|
|
pci->potar2 = (MPC85XX_PCI1_LOWER_IO >> 12) & 0x000fffff;
|
|
pci->potear2 = 0x00000000;
|
|
pci->powbar2 = (MPC85XX_PCI1_IO_BASE >> 12) & 0x000fffff;
|
|
/* Enable, IO R/W */
|
|
pci->powar2 = 0x80088000 | (__ilog2(MPC85XX_PCI1_IO_SIZE) - 1);
|
|
|
|
/* Setup 2G inbound Memory Window @ 0 */
|
|
pci->pitar1 = 0x00000000;
|
|
pci->piwbar1 = 0x00000000;
|
|
pci->piwar1 = 0xa0f5501e; /* Enable, Prefetch, Local
|
|
Mem, Snoop R/W, 2G */
|
|
}
|
|
|
|
|
|
extern int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin);
|
|
extern int mpc85xx_exclude_device(u_char bus, u_char devfn);
|
|
|
|
#ifdef CONFIG_85xx_PCI2
|
|
static void __init
|
|
mpc85xx_setup_pci2(struct pci_controller *hose)
|
|
{
|
|
volatile struct ccsr_pci *pci;
|
|
unsigned short temps;
|
|
bd_t *binfo = (bd_t *) __res;
|
|
|
|
pci = ioremap(binfo->bi_immr_base + MPC85xx_PCI2_OFFSET,
|
|
MPC85xx_PCI2_SIZE);
|
|
|
|
early_read_config_word(hose, hose->bus_offset, 0, PCI_COMMAND, &temps);
|
|
temps |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
|
|
early_write_config_word(hose, hose->bus_offset, 0, PCI_COMMAND, temps);
|
|
early_write_config_byte(hose, hose->bus_offset, 0, PCI_LATENCY_TIMER, 0x80);
|
|
|
|
/* Disable all windows (except powar0 since its ignored) */
|
|
pci->powar1 = 0;
|
|
pci->powar2 = 0;
|
|
pci->powar3 = 0;
|
|
pci->powar4 = 0;
|
|
pci->piwar1 = 0;
|
|
pci->piwar2 = 0;
|
|
pci->piwar3 = 0;
|
|
|
|
/* Setup Phys:PCI 1:1 outbound mem window @ MPC85XX_PCI2_LOWER_MEM */
|
|
pci->potar1 = (MPC85XX_PCI2_LOWER_MEM >> 12) & 0x000fffff;
|
|
pci->potear1 = 0x00000000;
|
|
pci->powbar1 = (MPC85XX_PCI2_LOWER_MEM >> 12) & 0x000fffff;
|
|
/* Enable, Mem R/W */
|
|
pci->powar1 = 0x80044000 |
|
|
(__ilog2(MPC85XX_PCI2_UPPER_MEM - MPC85XX_PCI2_LOWER_MEM + 1) - 1);
|
|
|
|
/* Setup outbound IO windows @ MPC85XX_PCI2_IO_BASE */
|
|
pci->potar2 = (MPC85XX_PCI2_LOWER_IO >> 12) & 0x000fffff;;
|
|
pci->potear2 = 0x00000000;
|
|
pci->powbar2 = (MPC85XX_PCI2_IO_BASE >> 12) & 0x000fffff;
|
|
/* Enable, IO R/W */
|
|
pci->powar2 = 0x80088000 | (__ilog2(MPC85XX_PCI2_IO_SIZE) - 1);
|
|
|
|
/* Setup 2G inbound Memory Window @ 0 */
|
|
pci->pitar1 = 0x00000000;
|
|
pci->piwbar1 = 0x00000000;
|
|
pci->piwar1 = 0xa0f5501e; /* Enable, Prefetch, Local
|
|
Mem, Snoop R/W, 2G */
|
|
}
|
|
#endif /* CONFIG_85xx_PCI2 */
|
|
|
|
int mpc85xx_pci1_last_busno = 0;
|
|
|
|
void __init
|
|
mpc85xx_setup_hose(void)
|
|
{
|
|
struct pci_controller *hose_a;
|
|
#ifdef CONFIG_85xx_PCI2
|
|
struct pci_controller *hose_b;
|
|
#endif
|
|
bd_t *binfo = (bd_t *) __res;
|
|
|
|
hose_a = pcibios_alloc_controller();
|
|
|
|
if (!hose_a)
|
|
return;
|
|
|
|
ppc_md.pci_swizzle = common_swizzle;
|
|
ppc_md.pci_map_irq = mpc85xx_map_irq;
|
|
|
|
hose_a->first_busno = 0;
|
|
hose_a->bus_offset = 0;
|
|
hose_a->last_busno = 0xff;
|
|
|
|
setup_indirect_pci(hose_a, binfo->bi_immr_base + PCI1_CFG_ADDR_OFFSET,
|
|
binfo->bi_immr_base + PCI1_CFG_DATA_OFFSET);
|
|
hose_a->set_cfg_type = 1;
|
|
|
|
mpc85xx_setup_pci1(hose_a);
|
|
|
|
hose_a->pci_mem_offset = MPC85XX_PCI1_MEM_OFFSET;
|
|
hose_a->mem_space.start = MPC85XX_PCI1_LOWER_MEM;
|
|
hose_a->mem_space.end = MPC85XX_PCI1_UPPER_MEM;
|
|
|
|
hose_a->io_space.start = MPC85XX_PCI1_LOWER_IO;
|
|
hose_a->io_space.end = MPC85XX_PCI1_UPPER_IO;
|
|
hose_a->io_base_phys = MPC85XX_PCI1_IO_BASE;
|
|
#ifdef CONFIG_85xx_PCI2
|
|
hose_a->io_base_virt = ioremap(MPC85XX_PCI1_IO_BASE,
|
|
MPC85XX_PCI1_IO_SIZE +
|
|
MPC85XX_PCI2_IO_SIZE);
|
|
#else
|
|
hose_a->io_base_virt = ioremap(MPC85XX_PCI1_IO_BASE,
|
|
MPC85XX_PCI1_IO_SIZE);
|
|
#endif
|
|
isa_io_base = (unsigned long)hose_a->io_base_virt;
|
|
|
|
/* setup resources */
|
|
pci_init_resource(&hose_a->mem_resources[0],
|
|
MPC85XX_PCI1_LOWER_MEM,
|
|
MPC85XX_PCI1_UPPER_MEM,
|
|
IORESOURCE_MEM, "PCI1 host bridge");
|
|
|
|
pci_init_resource(&hose_a->io_resource,
|
|
MPC85XX_PCI1_LOWER_IO,
|
|
MPC85XX_PCI1_UPPER_IO,
|
|
IORESOURCE_IO, "PCI1 host bridge");
|
|
|
|
ppc_md.pci_exclude_device = mpc85xx_exclude_device;
|
|
|
|
#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS)
|
|
/* Pre pciauto_bus_scan VIA init */
|
|
mpc85xx_cds_enable_via(hose_a);
|
|
#endif
|
|
|
|
hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno);
|
|
|
|
#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS)
|
|
/* Post pciauto_bus_scan VIA fixup */
|
|
mpc85xx_cds_fixup_via(hose_a);
|
|
#endif
|
|
|
|
#ifdef CONFIG_85xx_PCI2
|
|
hose_b = pcibios_alloc_controller();
|
|
|
|
if (!hose_b)
|
|
return;
|
|
|
|
hose_b->bus_offset = hose_a->last_busno + 1;
|
|
hose_b->first_busno = hose_a->last_busno + 1;
|
|
hose_b->last_busno = 0xff;
|
|
|
|
setup_indirect_pci(hose_b, binfo->bi_immr_base + PCI2_CFG_ADDR_OFFSET,
|
|
binfo->bi_immr_base + PCI2_CFG_DATA_OFFSET);
|
|
hose_b->set_cfg_type = 1;
|
|
|
|
mpc85xx_setup_pci2(hose_b);
|
|
|
|
hose_b->pci_mem_offset = MPC85XX_PCI2_MEM_OFFSET;
|
|
hose_b->mem_space.start = MPC85XX_PCI2_LOWER_MEM;
|
|
hose_b->mem_space.end = MPC85XX_PCI2_UPPER_MEM;
|
|
|
|
hose_b->io_space.start = MPC85XX_PCI2_LOWER_IO;
|
|
hose_b->io_space.end = MPC85XX_PCI2_UPPER_IO;
|
|
hose_b->io_base_phys = MPC85XX_PCI2_IO_BASE;
|
|
hose_b->io_base_virt = hose_a->io_base_virt + MPC85XX_PCI1_IO_SIZE;
|
|
|
|
/* setup resources */
|
|
pci_init_resource(&hose_b->mem_resources[0],
|
|
MPC85XX_PCI2_LOWER_MEM,
|
|
MPC85XX_PCI2_UPPER_MEM,
|
|
IORESOURCE_MEM, "PCI2 host bridge");
|
|
|
|
pci_init_resource(&hose_b->io_resource,
|
|
MPC85XX_PCI2_LOWER_IO,
|
|
MPC85XX_PCI2_UPPER_IO,
|
|
IORESOURCE_IO, "PCI2 host bridge");
|
|
|
|
hose_b->last_busno = pciauto_bus_scan(hose_b, hose_b->first_busno);
|
|
|
|
/* let board code know what the last bus number was on PCI1 */
|
|
mpc85xx_pci1_last_busno = hose_a->last_busno;
|
|
#endif
|
|
return;
|
|
}
|
|
#endif /* CONFIG_PCI */
|
|
|
|
|