4cc79776c9
Make it possible to test the hibernation core code with the help of the /sys/power/pm_test attribute introduced for suspend testing in the previous patch. Writing an appropriate string to this file causes the hibernation code to work in one of the test modes defined as follows: freezer - test the freezing of processes devices - test the freezing of processes and suspending of devices platform - test the freezing of processes, suspending of devices and platform global control methods(*) processors - test the freezing of processes, suspending of devices, platform global control methods(*) and the disabling of nonboot CPUs core - test the freezing of processes, suspending of devices, platform global control methods(*), the disabling of nonboot CPUs and suspending of platform/system devices (*) - the platform global control methods are only available on ACPI systems and are only tested if the hibernation mode is set to "platform" Then, if a hibernation is started by normal means, the hibernation core will perform its normal operations up to the point indicated by given test level. Next, it will wait for 5 seconds and carry out the resume operations needed to transition the system back to the fully functional state. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Len Brown <len.brown@intel.com>
799 lines
18 KiB
C
799 lines
18 KiB
C
/*
|
|
* kernel/power/disk.c - Suspend-to-disk support.
|
|
*
|
|
* Copyright (c) 2003 Patrick Mochel
|
|
* Copyright (c) 2003 Open Source Development Lab
|
|
* Copyright (c) 2004 Pavel Machek <pavel@suse.cz>
|
|
*
|
|
* This file is released under the GPLv2.
|
|
*
|
|
*/
|
|
|
|
#include <linux/suspend.h>
|
|
#include <linux/syscalls.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/string.h>
|
|
#include <linux/device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/mount.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/console.h>
|
|
#include <linux/cpu.h>
|
|
#include <linux/freezer.h>
|
|
|
|
#include "power.h"
|
|
|
|
|
|
static int noresume = 0;
|
|
char resume_file[256] = CONFIG_PM_STD_PARTITION;
|
|
dev_t swsusp_resume_device;
|
|
sector_t swsusp_resume_block;
|
|
|
|
enum {
|
|
HIBERNATION_INVALID,
|
|
HIBERNATION_PLATFORM,
|
|
HIBERNATION_TEST,
|
|
HIBERNATION_TESTPROC,
|
|
HIBERNATION_SHUTDOWN,
|
|
HIBERNATION_REBOOT,
|
|
/* keep last */
|
|
__HIBERNATION_AFTER_LAST
|
|
};
|
|
#define HIBERNATION_MAX (__HIBERNATION_AFTER_LAST-1)
|
|
#define HIBERNATION_FIRST (HIBERNATION_INVALID + 1)
|
|
|
|
static int hibernation_mode = HIBERNATION_SHUTDOWN;
|
|
|
|
static struct platform_hibernation_ops *hibernation_ops;
|
|
|
|
/**
|
|
* hibernation_set_ops - set the global hibernate operations
|
|
* @ops: the hibernation operations to use in subsequent hibernation transitions
|
|
*/
|
|
|
|
void hibernation_set_ops(struct platform_hibernation_ops *ops)
|
|
{
|
|
if (ops && !(ops->start && ops->pre_snapshot && ops->finish
|
|
&& ops->prepare && ops->enter && ops->pre_restore
|
|
&& ops->restore_cleanup)) {
|
|
WARN_ON(1);
|
|
return;
|
|
}
|
|
mutex_lock(&pm_mutex);
|
|
hibernation_ops = ops;
|
|
if (ops)
|
|
hibernation_mode = HIBERNATION_PLATFORM;
|
|
else if (hibernation_mode == HIBERNATION_PLATFORM)
|
|
hibernation_mode = HIBERNATION_SHUTDOWN;
|
|
|
|
mutex_unlock(&pm_mutex);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_DEBUG
|
|
static void hibernation_debug_sleep(void)
|
|
{
|
|
printk(KERN_INFO "hibernation debug: Waiting for 5 seconds.\n");
|
|
mdelay(5000);
|
|
}
|
|
|
|
static int hibernation_testmode(int mode)
|
|
{
|
|
if (hibernation_mode == mode) {
|
|
hibernation_debug_sleep();
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int hibernation_test(int level)
|
|
{
|
|
if (pm_test_level == level) {
|
|
hibernation_debug_sleep();
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
#else /* !CONFIG_PM_DEBUG */
|
|
static int hibernation_testmode(int mode) { return 0; }
|
|
static int hibernation_test(int level) { return 0; }
|
|
#endif /* !CONFIG_PM_DEBUG */
|
|
|
|
/**
|
|
* platform_start - tell the platform driver that we're starting
|
|
* hibernation
|
|
*/
|
|
|
|
static int platform_start(int platform_mode)
|
|
{
|
|
return (platform_mode && hibernation_ops) ?
|
|
hibernation_ops->start() : 0;
|
|
}
|
|
|
|
/**
|
|
* platform_pre_snapshot - prepare the machine for hibernation using the
|
|
* platform driver if so configured and return an error code if it fails
|
|
*/
|
|
|
|
static int platform_pre_snapshot(int platform_mode)
|
|
{
|
|
return (platform_mode && hibernation_ops) ?
|
|
hibernation_ops->pre_snapshot() : 0;
|
|
}
|
|
|
|
/**
|
|
* platform_leave - prepare the machine for switching to the normal mode
|
|
* of operation using the platform driver (called with interrupts disabled)
|
|
*/
|
|
|
|
static void platform_leave(int platform_mode)
|
|
{
|
|
if (platform_mode && hibernation_ops)
|
|
hibernation_ops->leave();
|
|
}
|
|
|
|
/**
|
|
* platform_finish - switch the machine to the normal mode of operation
|
|
* using the platform driver (must be called after platform_prepare())
|
|
*/
|
|
|
|
static void platform_finish(int platform_mode)
|
|
{
|
|
if (platform_mode && hibernation_ops)
|
|
hibernation_ops->finish();
|
|
}
|
|
|
|
/**
|
|
* platform_pre_restore - prepare the platform for the restoration from a
|
|
* hibernation image. If the restore fails after this function has been
|
|
* called, platform_restore_cleanup() must be called.
|
|
*/
|
|
|
|
static int platform_pre_restore(int platform_mode)
|
|
{
|
|
return (platform_mode && hibernation_ops) ?
|
|
hibernation_ops->pre_restore() : 0;
|
|
}
|
|
|
|
/**
|
|
* platform_restore_cleanup - switch the platform to the normal mode of
|
|
* operation after a failing restore. If platform_pre_restore() has been
|
|
* called before the failing restore, this function must be called too,
|
|
* regardless of the result of platform_pre_restore().
|
|
*/
|
|
|
|
static void platform_restore_cleanup(int platform_mode)
|
|
{
|
|
if (platform_mode && hibernation_ops)
|
|
hibernation_ops->restore_cleanup();
|
|
}
|
|
|
|
/**
|
|
* create_image - freeze devices that need to be frozen with interrupts
|
|
* off, create the hibernation image and thaw those devices. Control
|
|
* reappears in this routine after a restore.
|
|
*/
|
|
|
|
int create_image(int platform_mode)
|
|
{
|
|
int error;
|
|
|
|
error = arch_prepare_suspend();
|
|
if (error)
|
|
return error;
|
|
|
|
local_irq_disable();
|
|
/* At this point, device_suspend() has been called, but *not*
|
|
* device_power_down(). We *must* call device_power_down() now.
|
|
* Otherwise, drivers for some devices (e.g. interrupt controllers)
|
|
* become desynchronized with the actual state of the hardware
|
|
* at resume time, and evil weirdness ensues.
|
|
*/
|
|
error = device_power_down(PMSG_FREEZE);
|
|
if (error) {
|
|
printk(KERN_ERR "Some devices failed to power down, "
|
|
KERN_ERR "aborting suspend\n");
|
|
goto Enable_irqs;
|
|
}
|
|
|
|
if (hibernation_test(TEST_CORE))
|
|
goto Power_up;
|
|
|
|
in_suspend = 1;
|
|
save_processor_state();
|
|
error = swsusp_arch_suspend();
|
|
if (error)
|
|
printk(KERN_ERR "Error %d while creating the image\n", error);
|
|
/* Restore control flow magically appears here */
|
|
restore_processor_state();
|
|
if (!in_suspend)
|
|
platform_leave(platform_mode);
|
|
Power_up:
|
|
/* NOTE: device_power_up() is just a resume() for devices
|
|
* that suspended with irqs off ... no overall powerup.
|
|
*/
|
|
device_power_up();
|
|
Enable_irqs:
|
|
local_irq_enable();
|
|
return error;
|
|
}
|
|
|
|
/**
|
|
* hibernation_snapshot - quiesce devices and create the hibernation
|
|
* snapshot image.
|
|
* @platform_mode - if set, use the platform driver, if available, to
|
|
* prepare the platform frimware for the power transition.
|
|
*
|
|
* Must be called with pm_mutex held
|
|
*/
|
|
|
|
int hibernation_snapshot(int platform_mode)
|
|
{
|
|
int error;
|
|
|
|
/* Free memory before shutting down devices. */
|
|
error = swsusp_shrink_memory();
|
|
if (error)
|
|
return error;
|
|
|
|
error = platform_start(platform_mode);
|
|
if (error)
|
|
return error;
|
|
|
|
suspend_console();
|
|
error = device_suspend(PMSG_FREEZE);
|
|
if (error)
|
|
goto Resume_console;
|
|
|
|
if (hibernation_test(TEST_DEVICES))
|
|
goto Resume_devices;
|
|
|
|
error = platform_pre_snapshot(platform_mode);
|
|
if (error || hibernation_test(TEST_PLATFORM))
|
|
goto Finish;
|
|
|
|
error = disable_nonboot_cpus();
|
|
if (!error) {
|
|
if (hibernation_test(TEST_CPUS))
|
|
goto Enable_cpus;
|
|
|
|
if (hibernation_testmode(HIBERNATION_TEST))
|
|
goto Enable_cpus;
|
|
|
|
error = create_image(platform_mode);
|
|
/* Control returns here after successful restore */
|
|
}
|
|
Enable_cpus:
|
|
enable_nonboot_cpus();
|
|
Finish:
|
|
platform_finish(platform_mode);
|
|
Resume_devices:
|
|
device_resume();
|
|
Resume_console:
|
|
resume_console();
|
|
return error;
|
|
}
|
|
|
|
/**
|
|
* hibernation_restore - quiesce devices and restore the hibernation
|
|
* snapshot image. If successful, control returns in hibernation_snaphot()
|
|
* @platform_mode - if set, use the platform driver, if available, to
|
|
* prepare the platform frimware for the transition.
|
|
*
|
|
* Must be called with pm_mutex held
|
|
*/
|
|
|
|
int hibernation_restore(int platform_mode)
|
|
{
|
|
int error;
|
|
|
|
pm_prepare_console();
|
|
suspend_console();
|
|
error = device_suspend(PMSG_PRETHAW);
|
|
if (error)
|
|
goto Finish;
|
|
|
|
error = platform_pre_restore(platform_mode);
|
|
if (!error) {
|
|
error = disable_nonboot_cpus();
|
|
if (!error)
|
|
error = swsusp_resume();
|
|
enable_nonboot_cpus();
|
|
}
|
|
platform_restore_cleanup(platform_mode);
|
|
device_resume();
|
|
Finish:
|
|
resume_console();
|
|
pm_restore_console();
|
|
return error;
|
|
}
|
|
|
|
/**
|
|
* hibernation_platform_enter - enter the hibernation state using the
|
|
* platform driver (if available)
|
|
*/
|
|
|
|
int hibernation_platform_enter(void)
|
|
{
|
|
int error;
|
|
|
|
if (!hibernation_ops)
|
|
return -ENOSYS;
|
|
|
|
/*
|
|
* We have cancelled the power transition by running
|
|
* hibernation_ops->finish() before saving the image, so we should let
|
|
* the firmware know that we're going to enter the sleep state after all
|
|
*/
|
|
error = hibernation_ops->start();
|
|
if (error)
|
|
return error;
|
|
|
|
suspend_console();
|
|
error = device_suspend(PMSG_SUSPEND);
|
|
if (error)
|
|
goto Resume_console;
|
|
|
|
error = hibernation_ops->prepare();
|
|
if (error)
|
|
goto Resume_devices;
|
|
|
|
error = disable_nonboot_cpus();
|
|
if (error)
|
|
goto Finish;
|
|
|
|
local_irq_disable();
|
|
error = device_power_down(PMSG_SUSPEND);
|
|
if (!error) {
|
|
hibernation_ops->enter();
|
|
/* We should never get here */
|
|
while (1);
|
|
}
|
|
local_irq_enable();
|
|
|
|
/*
|
|
* We don't need to reenable the nonboot CPUs or resume consoles, since
|
|
* the system is going to be halted anyway.
|
|
*/
|
|
Finish:
|
|
hibernation_ops->finish();
|
|
Resume_devices:
|
|
device_resume();
|
|
Resume_console:
|
|
resume_console();
|
|
return error;
|
|
}
|
|
|
|
/**
|
|
* power_down - Shut the machine down for hibernation.
|
|
*
|
|
* Use the platform driver, if configured so; otherwise try
|
|
* to power off or reboot.
|
|
*/
|
|
|
|
static void power_down(void)
|
|
{
|
|
switch (hibernation_mode) {
|
|
case HIBERNATION_TEST:
|
|
case HIBERNATION_TESTPROC:
|
|
break;
|
|
case HIBERNATION_REBOOT:
|
|
kernel_restart(NULL);
|
|
break;
|
|
case HIBERNATION_PLATFORM:
|
|
hibernation_platform_enter();
|
|
case HIBERNATION_SHUTDOWN:
|
|
kernel_power_off();
|
|
break;
|
|
}
|
|
kernel_halt();
|
|
/*
|
|
* Valid image is on the disk, if we continue we risk serious data
|
|
* corruption after resume.
|
|
*/
|
|
printk(KERN_CRIT "Please power me down manually\n");
|
|
while(1);
|
|
}
|
|
|
|
static void unprepare_processes(void)
|
|
{
|
|
thaw_processes();
|
|
pm_restore_console();
|
|
}
|
|
|
|
static int prepare_processes(void)
|
|
{
|
|
int error = 0;
|
|
|
|
pm_prepare_console();
|
|
if (freeze_processes()) {
|
|
error = -EBUSY;
|
|
unprepare_processes();
|
|
}
|
|
return error;
|
|
}
|
|
|
|
/**
|
|
* hibernate - The granpappy of the built-in hibernation management
|
|
*/
|
|
|
|
int hibernate(void)
|
|
{
|
|
int error;
|
|
|
|
mutex_lock(&pm_mutex);
|
|
/* The snapshot device should not be opened while we're running */
|
|
if (!atomic_add_unless(&snapshot_device_available, -1, 0)) {
|
|
error = -EBUSY;
|
|
goto Unlock;
|
|
}
|
|
|
|
error = pm_notifier_call_chain(PM_HIBERNATION_PREPARE);
|
|
if (error)
|
|
goto Exit;
|
|
|
|
/* Allocate memory management structures */
|
|
error = create_basic_memory_bitmaps();
|
|
if (error)
|
|
goto Exit;
|
|
|
|
printk("Syncing filesystems ... ");
|
|
sys_sync();
|
|
printk("done.\n");
|
|
|
|
error = prepare_processes();
|
|
if (error)
|
|
goto Finish;
|
|
|
|
if (hibernation_test(TEST_FREEZER))
|
|
goto Thaw;
|
|
|
|
if (hibernation_testmode(HIBERNATION_TESTPROC))
|
|
goto Thaw;
|
|
|
|
error = hibernation_snapshot(hibernation_mode == HIBERNATION_PLATFORM);
|
|
if (in_suspend && !error) {
|
|
unsigned int flags = 0;
|
|
|
|
if (hibernation_mode == HIBERNATION_PLATFORM)
|
|
flags |= SF_PLATFORM_MODE;
|
|
pr_debug("PM: writing image.\n");
|
|
error = swsusp_write(flags);
|
|
swsusp_free();
|
|
if (!error)
|
|
power_down();
|
|
} else {
|
|
pr_debug("PM: Image restored successfully.\n");
|
|
swsusp_free();
|
|
}
|
|
Thaw:
|
|
unprepare_processes();
|
|
Finish:
|
|
free_basic_memory_bitmaps();
|
|
Exit:
|
|
pm_notifier_call_chain(PM_POST_HIBERNATION);
|
|
atomic_inc(&snapshot_device_available);
|
|
Unlock:
|
|
mutex_unlock(&pm_mutex);
|
|
return error;
|
|
}
|
|
|
|
|
|
/**
|
|
* software_resume - Resume from a saved image.
|
|
*
|
|
* Called as a late_initcall (so all devices are discovered and
|
|
* initialized), we call swsusp to see if we have a saved image or not.
|
|
* If so, we quiesce devices, the restore the saved image. We will
|
|
* return above (in hibernate() ) if everything goes well.
|
|
* Otherwise, we fail gracefully and return to the normally
|
|
* scheduled program.
|
|
*
|
|
*/
|
|
|
|
static int software_resume(void)
|
|
{
|
|
int error;
|
|
unsigned int flags;
|
|
|
|
/*
|
|
* name_to_dev_t() below takes a sysfs buffer mutex when sysfs
|
|
* is configured into the kernel. Since the regular hibernate
|
|
* trigger path is via sysfs which takes a buffer mutex before
|
|
* calling hibernate functions (which take pm_mutex) this can
|
|
* cause lockdep to complain about a possible ABBA deadlock
|
|
* which cannot happen since we're in the boot code here and
|
|
* sysfs can't be invoked yet. Therefore, we use a subclass
|
|
* here to avoid lockdep complaining.
|
|
*/
|
|
mutex_lock_nested(&pm_mutex, SINGLE_DEPTH_NESTING);
|
|
if (!swsusp_resume_device) {
|
|
if (!strlen(resume_file)) {
|
|
mutex_unlock(&pm_mutex);
|
|
return -ENOENT;
|
|
}
|
|
swsusp_resume_device = name_to_dev_t(resume_file);
|
|
pr_debug("swsusp: Resume From Partition %s\n", resume_file);
|
|
} else {
|
|
pr_debug("swsusp: Resume From Partition %d:%d\n",
|
|
MAJOR(swsusp_resume_device), MINOR(swsusp_resume_device));
|
|
}
|
|
|
|
if (noresume) {
|
|
/**
|
|
* FIXME: If noresume is specified, we need to find the partition
|
|
* and reset it back to normal swap space.
|
|
*/
|
|
mutex_unlock(&pm_mutex);
|
|
return 0;
|
|
}
|
|
|
|
pr_debug("PM: Checking swsusp image.\n");
|
|
error = swsusp_check();
|
|
if (error)
|
|
goto Unlock;
|
|
|
|
/* The snapshot device should not be opened while we're running */
|
|
if (!atomic_add_unless(&snapshot_device_available, -1, 0)) {
|
|
error = -EBUSY;
|
|
goto Unlock;
|
|
}
|
|
|
|
error = pm_notifier_call_chain(PM_RESTORE_PREPARE);
|
|
if (error)
|
|
goto Finish;
|
|
|
|
error = create_basic_memory_bitmaps();
|
|
if (error)
|
|
goto Finish;
|
|
|
|
pr_debug("PM: Preparing processes for restore.\n");
|
|
error = prepare_processes();
|
|
if (error) {
|
|
swsusp_close();
|
|
goto Done;
|
|
}
|
|
|
|
pr_debug("PM: Reading swsusp image.\n");
|
|
|
|
error = swsusp_read(&flags);
|
|
if (!error)
|
|
hibernation_restore(flags & SF_PLATFORM_MODE);
|
|
|
|
printk(KERN_ERR "PM: Restore failed, recovering.\n");
|
|
swsusp_free();
|
|
unprepare_processes();
|
|
Done:
|
|
free_basic_memory_bitmaps();
|
|
Finish:
|
|
pm_notifier_call_chain(PM_POST_RESTORE);
|
|
atomic_inc(&snapshot_device_available);
|
|
/* For success case, the suspend path will release the lock */
|
|
Unlock:
|
|
mutex_unlock(&pm_mutex);
|
|
pr_debug("PM: Resume from disk failed.\n");
|
|
return error;
|
|
}
|
|
|
|
late_initcall(software_resume);
|
|
|
|
|
|
static const char * const hibernation_modes[] = {
|
|
[HIBERNATION_PLATFORM] = "platform",
|
|
[HIBERNATION_SHUTDOWN] = "shutdown",
|
|
[HIBERNATION_REBOOT] = "reboot",
|
|
[HIBERNATION_TEST] = "test",
|
|
[HIBERNATION_TESTPROC] = "testproc",
|
|
};
|
|
|
|
/**
|
|
* disk - Control hibernation mode
|
|
*
|
|
* Suspend-to-disk can be handled in several ways. We have a few options
|
|
* for putting the system to sleep - using the platform driver (e.g. ACPI
|
|
* or other hibernation_ops), powering off the system or rebooting the
|
|
* system (for testing) as well as the two test modes.
|
|
*
|
|
* The system can support 'platform', and that is known a priori (and
|
|
* encoded by the presence of hibernation_ops). However, the user may
|
|
* choose 'shutdown' or 'reboot' as alternatives, as well as one fo the
|
|
* test modes, 'test' or 'testproc'.
|
|
*
|
|
* show() will display what the mode is currently set to.
|
|
* store() will accept one of
|
|
*
|
|
* 'platform'
|
|
* 'shutdown'
|
|
* 'reboot'
|
|
* 'test'
|
|
* 'testproc'
|
|
*
|
|
* It will only change to 'platform' if the system
|
|
* supports it (as determined by having hibernation_ops).
|
|
*/
|
|
|
|
static ssize_t disk_show(struct kobject *kobj, struct kobj_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int i;
|
|
char *start = buf;
|
|
|
|
for (i = HIBERNATION_FIRST; i <= HIBERNATION_MAX; i++) {
|
|
if (!hibernation_modes[i])
|
|
continue;
|
|
switch (i) {
|
|
case HIBERNATION_SHUTDOWN:
|
|
case HIBERNATION_REBOOT:
|
|
case HIBERNATION_TEST:
|
|
case HIBERNATION_TESTPROC:
|
|
break;
|
|
case HIBERNATION_PLATFORM:
|
|
if (hibernation_ops)
|
|
break;
|
|
/* not a valid mode, continue with loop */
|
|
continue;
|
|
}
|
|
if (i == hibernation_mode)
|
|
buf += sprintf(buf, "[%s] ", hibernation_modes[i]);
|
|
else
|
|
buf += sprintf(buf, "%s ", hibernation_modes[i]);
|
|
}
|
|
buf += sprintf(buf, "\n");
|
|
return buf-start;
|
|
}
|
|
|
|
|
|
static ssize_t disk_store(struct kobject *kobj, struct kobj_attribute *attr,
|
|
const char *buf, size_t n)
|
|
{
|
|
int error = 0;
|
|
int i;
|
|
int len;
|
|
char *p;
|
|
int mode = HIBERNATION_INVALID;
|
|
|
|
p = memchr(buf, '\n', n);
|
|
len = p ? p - buf : n;
|
|
|
|
mutex_lock(&pm_mutex);
|
|
for (i = HIBERNATION_FIRST; i <= HIBERNATION_MAX; i++) {
|
|
if (len == strlen(hibernation_modes[i])
|
|
&& !strncmp(buf, hibernation_modes[i], len)) {
|
|
mode = i;
|
|
break;
|
|
}
|
|
}
|
|
if (mode != HIBERNATION_INVALID) {
|
|
switch (mode) {
|
|
case HIBERNATION_SHUTDOWN:
|
|
case HIBERNATION_REBOOT:
|
|
case HIBERNATION_TEST:
|
|
case HIBERNATION_TESTPROC:
|
|
hibernation_mode = mode;
|
|
break;
|
|
case HIBERNATION_PLATFORM:
|
|
if (hibernation_ops)
|
|
hibernation_mode = mode;
|
|
else
|
|
error = -EINVAL;
|
|
}
|
|
} else
|
|
error = -EINVAL;
|
|
|
|
if (!error)
|
|
pr_debug("PM: suspend-to-disk mode set to '%s'\n",
|
|
hibernation_modes[mode]);
|
|
mutex_unlock(&pm_mutex);
|
|
return error ? error : n;
|
|
}
|
|
|
|
power_attr(disk);
|
|
|
|
static ssize_t resume_show(struct kobject *kobj, struct kobj_attribute *attr,
|
|
char *buf)
|
|
{
|
|
return sprintf(buf,"%d:%d\n", MAJOR(swsusp_resume_device),
|
|
MINOR(swsusp_resume_device));
|
|
}
|
|
|
|
static ssize_t resume_store(struct kobject *kobj, struct kobj_attribute *attr,
|
|
const char *buf, size_t n)
|
|
{
|
|
unsigned int maj, min;
|
|
dev_t res;
|
|
int ret = -EINVAL;
|
|
|
|
if (sscanf(buf, "%u:%u", &maj, &min) != 2)
|
|
goto out;
|
|
|
|
res = MKDEV(maj,min);
|
|
if (maj != MAJOR(res) || min != MINOR(res))
|
|
goto out;
|
|
|
|
mutex_lock(&pm_mutex);
|
|
swsusp_resume_device = res;
|
|
mutex_unlock(&pm_mutex);
|
|
printk("Attempting manual resume\n");
|
|
noresume = 0;
|
|
software_resume();
|
|
ret = n;
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
power_attr(resume);
|
|
|
|
static ssize_t image_size_show(struct kobject *kobj, struct kobj_attribute *attr,
|
|
char *buf)
|
|
{
|
|
return sprintf(buf, "%lu\n", image_size);
|
|
}
|
|
|
|
static ssize_t image_size_store(struct kobject *kobj, struct kobj_attribute *attr,
|
|
const char *buf, size_t n)
|
|
{
|
|
unsigned long size;
|
|
|
|
if (sscanf(buf, "%lu", &size) == 1) {
|
|
image_size = size;
|
|
return n;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
power_attr(image_size);
|
|
|
|
static struct attribute * g[] = {
|
|
&disk_attr.attr,
|
|
&resume_attr.attr,
|
|
&image_size_attr.attr,
|
|
NULL,
|
|
};
|
|
|
|
|
|
static struct attribute_group attr_group = {
|
|
.attrs = g,
|
|
};
|
|
|
|
|
|
static int __init pm_disk_init(void)
|
|
{
|
|
return sysfs_create_group(power_kobj, &attr_group);
|
|
}
|
|
|
|
core_initcall(pm_disk_init);
|
|
|
|
|
|
static int __init resume_setup(char *str)
|
|
{
|
|
if (noresume)
|
|
return 1;
|
|
|
|
strncpy( resume_file, str, 255 );
|
|
return 1;
|
|
}
|
|
|
|
static int __init resume_offset_setup(char *str)
|
|
{
|
|
unsigned long long offset;
|
|
|
|
if (noresume)
|
|
return 1;
|
|
|
|
if (sscanf(str, "%llu", &offset) == 1)
|
|
swsusp_resume_block = offset;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int __init noresume_setup(char *str)
|
|
{
|
|
noresume = 1;
|
|
return 1;
|
|
}
|
|
|
|
__setup("noresume", noresume_setup);
|
|
__setup("resume_offset=", resume_offset_setup);
|
|
__setup("resume=", resume_setup);
|