android_kernel_xiaomi_sm8350/drivers/char/rio/rioinit.c
Adrian Bunk 59247ca2fd drivers/char/rio/: remove VCS tags
This patch removes ancient VCS tags (either protected
by #ifdef SCCS_LABELS or commented out).

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20 17:12:35 -07:00

423 lines
13 KiB
C

/*
** -----------------------------------------------------------------------------
**
** Perle Specialix driver for Linux
** Ported from existing RIO Driver for SCO sources.
*
* (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
**
** Module : rioinit.c
** SID : 1.3
** Last Modified : 11/6/98 10:33:43
** Retrieved : 11/6/98 10:33:49
**
** ident @(#)rioinit.c 1.3
**
** -----------------------------------------------------------------------------
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <asm/io.h>
#include <asm/system.h>
#include <asm/string.h>
#include <asm/uaccess.h>
#include <linux/termios.h>
#include <linux/serial.h>
#include <linux/generic_serial.h>
#include "linux_compat.h"
#include "pkt.h"
#include "daemon.h"
#include "rio.h"
#include "riospace.h"
#include "cmdpkt.h"
#include "map.h"
#include "rup.h"
#include "port.h"
#include "riodrvr.h"
#include "rioinfo.h"
#include "func.h"
#include "errors.h"
#include "pci.h"
#include "parmmap.h"
#include "unixrup.h"
#include "board.h"
#include "host.h"
#include "phb.h"
#include "link.h"
#include "cmdblk.h"
#include "route.h"
#include "cirrus.h"
#include "rioioctl.h"
#include "rio_linux.h"
int RIOPCIinit(struct rio_info *p, int Mode);
static int RIOScrub(int, u8 __iomem *, int);
/**
** RIOAssignAT :
**
** Fill out the fields in the p->RIOHosts structure now we know we know
** we have a board present.
**
** bits < 0 indicates 8 bit operation requested,
** bits > 0 indicates 16 bit operation.
*/
int RIOAssignAT(struct rio_info *p, int Base, void __iomem *virtAddr, int mode)
{
int bits;
struct DpRam __iomem *cardp = (struct DpRam __iomem *)virtAddr;
if ((Base < ONE_MEG) || (mode & BYTE_ACCESS_MODE))
bits = BYTE_OPERATION;
else
bits = WORD_OPERATION;
/*
** Board has passed its scrub test. Fill in all the
** transient stuff.
*/
p->RIOHosts[p->RIONumHosts].Caddr = virtAddr;
p->RIOHosts[p->RIONumHosts].CardP = virtAddr;
/*
** Revision 01 AT host cards don't support WORD operations,
*/
if (readb(&cardp->DpRevision) == 01)
bits = BYTE_OPERATION;
p->RIOHosts[p->RIONumHosts].Type = RIO_AT;
p->RIOHosts[p->RIONumHosts].Copy = rio_copy_to_card;
/* set this later */
p->RIOHosts[p->RIONumHosts].Slot = -1;
p->RIOHosts[p->RIONumHosts].Mode = SLOW_LINKS | SLOW_AT_BUS | bits;
writeb(BOOT_FROM_RAM | EXTERNAL_BUS_OFF | p->RIOHosts[p->RIONumHosts].Mode | INTERRUPT_DISABLE ,
&p->RIOHosts[p->RIONumHosts].Control);
writeb(0xFF, &p->RIOHosts[p->RIONumHosts].ResetInt);
writeb(BOOT_FROM_RAM | EXTERNAL_BUS_OFF | p->RIOHosts[p->RIONumHosts].Mode | INTERRUPT_DISABLE,
&p->RIOHosts[p->RIONumHosts].Control);
writeb(0xFF, &p->RIOHosts[p->RIONumHosts].ResetInt);
p->RIOHosts[p->RIONumHosts].UniqueNum =
((readb(&p->RIOHosts[p->RIONumHosts].Unique[0])&0xFF)<<0)|
((readb(&p->RIOHosts[p->RIONumHosts].Unique[1])&0xFF)<<8)|
((readb(&p->RIOHosts[p->RIONumHosts].Unique[2])&0xFF)<<16)|
((readb(&p->RIOHosts[p->RIONumHosts].Unique[3])&0xFF)<<24);
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Uniquenum 0x%x\n",p->RIOHosts[p->RIONumHosts].UniqueNum);
p->RIONumHosts++;
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Tests Passed at 0x%x\n", Base);
return(1);
}
static u8 val[] = {
#ifdef VERY_LONG_TEST
0x00, 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80,
0xa5, 0xff, 0x5a, 0x00, 0xff, 0xc9, 0x36,
#endif
0xff, 0x00, 0x00 };
#define TEST_END sizeof(val)
/*
** RAM test a board.
** Nothing too complicated, just enough to check it out.
*/
int RIOBoardTest(unsigned long paddr, void __iomem *caddr, unsigned char type, int slot)
{
struct DpRam __iomem *DpRam = caddr;
void __iomem *ram[4];
int size[4];
int op, bank;
int nbanks;
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Reset host type=%d, DpRam=%p, slot=%d\n",
type, DpRam, slot);
RIOHostReset(type, DpRam, slot);
/*
** Scrub the memory. This comes in several banks:
** DPsram1 - 7000h bytes
** DPsram2 - 200h bytes
** DPsram3 - 7000h bytes
** scratch - 1000h bytes
*/
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Setup ram/size arrays\n");
size[0] = DP_SRAM1_SIZE;
size[1] = DP_SRAM2_SIZE;
size[2] = DP_SRAM3_SIZE;
size[3] = DP_SCRATCH_SIZE;
ram[0] = DpRam->DpSram1;
ram[1] = DpRam->DpSram2;
ram[2] = DpRam->DpSram3;
nbanks = (type == RIO_PCI) ? 3 : 4;
if (nbanks == 4)
ram[3] = DpRam->DpScratch;
if (nbanks == 3) {
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Memory: %p(0x%x), %p(0x%x), %p(0x%x)\n",
ram[0], size[0], ram[1], size[1], ram[2], size[2]);
} else {
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: %p(0x%x), %p(0x%x), %p(0x%x), %p(0x%x)\n",
ram[0], size[0], ram[1], size[1], ram[2], size[2], ram[3], size[3]);
}
/*
** This scrub operation will test for crosstalk between
** banks. TEST_END is a magic number, and relates to the offset
** within the 'val' array used by Scrub.
*/
for (op=0; op<TEST_END; op++) {
for (bank=0; bank<nbanks; bank++) {
if (RIOScrub(op, ram[bank], size[bank]) == RIO_FAIL) {
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: RIOScrub band %d, op %d failed\n",
bank, op);
return RIO_FAIL;
}
}
}
rio_dprintk (RIO_DEBUG_INIT, "Test completed\n");
return 0;
}
/*
** Scrub an area of RAM.
** Define PRETEST and POSTTEST for a more thorough checking of the
** state of the memory.
** Call with op set to an index into the above 'val' array to determine
** which value will be written into memory.
** Call with op set to zero means that the RAM will not be read and checked
** before it is written.
** Call with op not zero and the RAM will be read and compared with val[op-1]
** to check that the data from the previous phase was retained.
*/
static int RIOScrub(int op, u8 __iomem *ram, int size)
{
int off;
unsigned char oldbyte;
unsigned char newbyte;
unsigned char invbyte;
unsigned short oldword;
unsigned short newword;
unsigned short invword;
unsigned short swapword;
if (op) {
oldbyte = val[op-1];
oldword = oldbyte | (oldbyte<<8);
} else
oldbyte = oldword = 0; /* Tell the compiler we've initilalized them. */
newbyte = val[op];
newword = newbyte | (newbyte<<8);
invbyte = ~newbyte;
invword = invbyte | (invbyte<<8);
/*
** Check that the RAM contains the value that should have been left there
** by the previous test (not applicable for pass zero)
*/
if (op) {
for (off=0; off<size; off++) {
if (readb(ram + off) != oldbyte) {
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Byte Pre Check 1: BYTE at offset 0x%x should have been=%x, was=%x\n", off, oldbyte, readb(ram + off));
return RIO_FAIL;
}
}
for (off=0; off<size; off+=2) {
if (readw(ram + off) != oldword) {
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Word Pre Check: WORD at offset 0x%x should have been=%x, was=%x\n",off,oldword, readw(ram + off));
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Word Pre Check: BYTE at offset 0x%x is %x BYTE at offset 0x%x is %x\n", off, readb(ram + off), off+1, readb(ram+off+1));
return RIO_FAIL;
}
}
}
/*
** Now write the INVERSE of the test data into every location, using
** BYTE write operations, first checking before each byte is written
** that the location contains the old value still, and checking after
** the write that the location contains the data specified - this is
** the BYTE read/write test.
*/
for (off=0; off<size; off++) {
if (op && (readb(ram + off) != oldbyte)) {
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Byte Pre Check 2: BYTE at offset 0x%x should have been=%x, was=%x\n", off, oldbyte, readb(ram + off));
return RIO_FAIL;
}
writeb(invbyte, ram + off);
if (readb(ram + off) != invbyte) {
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Byte Inv Check: BYTE at offset 0x%x should have been=%x, was=%x\n", off, invbyte, readb(ram + off));
return RIO_FAIL;
}
}
/*
** now, use WORD operations to write the test value into every location,
** check as before that the location contains the previous test value
** before overwriting, and that it contains the data value written
** afterwards.
** This is the WORD operation test.
*/
for (off=0; off<size; off+=2) {
if (readw(ram + off) != invword) {
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Word Inv Check: WORD at offset 0x%x should have been=%x, was=%x\n", off, invword, readw(ram + off));
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Word Inv Check: BYTE at offset 0x%x is %x BYTE at offset 0x%x is %x\n", off, readb(ram + off), off+1, readb(ram+off+1));
return RIO_FAIL;
}
writew(newword, ram + off);
if ( readw(ram + off) != newword ) {
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Post Word Check 1: WORD at offset 0x%x should have been=%x, was=%x\n", off, newword, readw(ram + off));
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Post Word Check 1: BYTE at offset 0x%x is %x BYTE at offset 0x%x is %x\n", off, readb(ram + off), off+1, readb(ram + off + 1));
return RIO_FAIL;
}
}
/*
** now run through the block of memory again, first in byte mode
** then in word mode, and check that all the locations contain the
** required test data.
*/
for (off=0; off<size; off++) {
if (readb(ram + off) != newbyte) {
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Post Byte Check: BYTE at offset 0x%x should have been=%x, was=%x\n", off, newbyte, readb(ram + off));
return RIO_FAIL;
}
}
for (off=0; off<size; off+=2) {
if (readw(ram + off) != newword ) {
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Post Word Check 2: WORD at offset 0x%x should have been=%x, was=%x\n", off, newword, readw(ram + off));
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Post Word Check 2: BYTE at offset 0x%x is %x BYTE at offset 0x%x is %x\n", off, readb(ram + off), off+1, readb(ram + off + 1));
return RIO_FAIL;
}
}
/*
** time to check out byte swapping errors
*/
swapword = invbyte | (newbyte << 8);
for (off=0; off<size; off+=2) {
writeb(invbyte, &ram[off]);
writeb(newbyte, &ram[off+1]);
}
for ( off=0; off<size; off+=2 ) {
if (readw(ram + off) != swapword) {
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: SwapWord Check 1: WORD at offset 0x%x should have been=%x, was=%x\n", off, swapword, readw(ram + off));
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: SwapWord Check 1: BYTE at offset 0x%x is %x BYTE at offset 0x%x is %x\n", off, readb(ram + off), off+1, readb(ram + off + 1));
return RIO_FAIL;
}
writew(~swapword, ram + off);
}
for (off=0; off<size; off+=2) {
if (readb(ram + off) != newbyte) {
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: SwapWord Check 2: BYTE at offset 0x%x should have been=%x, was=%x\n", off, newbyte, readb(ram + off));
return RIO_FAIL;
}
if (readb(ram + off + 1) != invbyte) {
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: SwapWord Check 2: BYTE at offset 0x%x should have been=%x, was=%x\n", off+1, invbyte, readb(ram + off + 1));
return RIO_FAIL;
}
writew(newword, ram + off);
}
return 0;
}
int RIODefaultName(struct rio_info *p, struct Host *HostP, unsigned int UnitId)
{
memcpy(HostP->Mapping[UnitId].Name, "UNKNOWN RTA X-XX", 17);
HostP->Mapping[UnitId].Name[12]='1'+(HostP-p->RIOHosts);
if ((UnitId+1) > 9) {
HostP->Mapping[UnitId].Name[14]='0'+((UnitId+1)/10);
HostP->Mapping[UnitId].Name[15]='0'+((UnitId+1)%10);
}
else {
HostP->Mapping[UnitId].Name[14]='1'+UnitId;
HostP->Mapping[UnitId].Name[15]=0;
}
return 0;
}
#define RIO_RELEASE "Linux"
#define RELEASE_ID "1.0"
static struct rioVersion stVersion;
struct rioVersion *RIOVersid(void)
{
strlcpy(stVersion.version, "RIO driver for linux V1.0",
sizeof(stVersion.version));
strlcpy(stVersion.buildDate, __DATE__,
sizeof(stVersion.buildDate));
return &stVersion;
}
void RIOHostReset(unsigned int Type, struct DpRam __iomem *DpRamP, unsigned int Slot)
{
/*
** Reset the Tpu
*/
rio_dprintk (RIO_DEBUG_INIT, "RIOHostReset: type 0x%x", Type);
switch ( Type ) {
case RIO_AT:
rio_dprintk (RIO_DEBUG_INIT, " (RIO_AT)\n");
writeb(BOOT_FROM_RAM | EXTERNAL_BUS_OFF | INTERRUPT_DISABLE | BYTE_OPERATION |
SLOW_LINKS | SLOW_AT_BUS, &DpRamP->DpControl);
writeb(0xFF, &DpRamP->DpResetTpu);
udelay(3);
rio_dprintk (RIO_DEBUG_INIT, "RIOHostReset: Don't know if it worked. Try reset again\n");
writeb(BOOT_FROM_RAM | EXTERNAL_BUS_OFF | INTERRUPT_DISABLE |
BYTE_OPERATION | SLOW_LINKS | SLOW_AT_BUS, &DpRamP->DpControl);
writeb(0xFF, &DpRamP->DpResetTpu);
udelay(3);
break;
case RIO_PCI:
rio_dprintk (RIO_DEBUG_INIT, " (RIO_PCI)\n");
writeb(RIO_PCI_BOOT_FROM_RAM, &DpRamP->DpControl);
writeb(0xFF, &DpRamP->DpResetInt);
writeb(0xFF, &DpRamP->DpResetTpu);
udelay(100);
break;
default:
rio_dprintk (RIO_DEBUG_INIT, " (UNKNOWN)\n");
break;
}
return;
}